Ok..
A few weeks ago I ''bricked'' my phone when I tried to flash a sbf, hoping to get the phone a higher/better OS than motoBLUR. But it went really wrong, I couldnt start my phone after flashing succesfully.. Later on I kinda came to the conclusion that I flashed the wrong sbf. Since my phone is a me525 and I used a file for mb525. What the result was that my phone turned black and it was showing a white led when charged in the pc. I have searched for quite a while for a sbf. that suits my phone to flash it again. So if there is a kind person who could help me I would be very grateful!
p.s. I'm new into all this developing with OS' and stuff..
Same issue!
Tungieee said:
Ok..
A few weeks ago I ''bricked'' my phone when I tried to flash a sbf, hoping to get the phone a higher/better OS than motoBLUR. But it went really wrong, I couldnt start my phone after flashing succesfully.. Later on I kinda came to the conclusion that I flashed the wrong sbf. Since my phone is a me525 and I used a file for mb525. What the result was that my phone turned black and it was showing a white led when charged in the pc. I have searched for quite a while for a sbf. that suits my phone to flash it again. So if there is a kind person who could help me I would be very grateful!
p.s. I'm new into all this developing with OS' and stuff..
Click to expand...
Click to collapse
Hey..! im on the same problem..cant get my phone to boot up normally ..but the computer still detect the phone even if its black screen well hope we get help..i need my phone back ..
I know just a couples of days ago that you have encountered "soft" or "fake brick": just go to bootloader mode as usual and try flash a new SBF. It is in boot loader, just no screen display.
Related
Dear people,
I am really searching all day how to unbrick my device, I tried everything, and still nothing worked so far. I got a phone from a friend who tried to update the software and probably removed the cable while flashing. Now when I turn on the phone the only thing I see is the boot logo and nothing happens after.
It is possible to go into the boot-modus (with the 4 colors). This way it worked for me to make a USB-connection with my PC. I tried a couple of roms but nothing worked so far, everytime when I try to flash the device, it will jump to the grey screen with the % bar and then I wait for it to go to the 100%, but when it goes to 1% the phone instantly reboots, this happens everytime I try to flash the device. After it reboots it shows the boot-screen (logo of the half-flashed rom)
I hope you got an answer for me to fix this phone. Like I said I was searching all day for an answer and tried several things but nothing worked so far, any suggestions? Please...
Hi,
Yes I tried the WM5 rom, but the same thing happened, after 1% the phone rebooted...
Hold on, trying another one right now that seems to work...
Okay I managed to fix the one using another official ROM
this one:
http://www.smartmobility.nl/_BIN/TRI_DT_NLD_1234042_103_6275_1380011_108_Ship.zip
Thnx at3m
You have to flash Hard SPL: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Happend to me once, and after flashing this, never again.
chalid said:
You have to flash Hard SPL: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Happend to me once, and after flashing this, never again.
Click to expand...
Click to collapse
Yeah after I put the official rom on again you need to hard-spl it. thnx ^^
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
Hey guys, need some help if possible.....
About 3-4 days ago, I got a notification on my g1 to install a new update, I accepted and the download process started and ended as usual.
When the phone rebooted at the end of everything, I see the original t-mobile design, then the android logo, and then a black screen... and thats it, my phone just remains black, no sign of life.
I cant power the device off, I have to pull the battery out, I tried soft and hard reset but nothing works...
Please someone, anyone, save my g1 !!!!
Is your phone stock? Rooted? ROM? SPL? More information would help...
If it's a stock US phone with the original SPL you could try flashing RC29 and letting it upgrade from there again.
hi,
first of all i am sorry if my english is bad
i have a friend that he has mytouch 3g and he has a problem. his device sometimes was stuck so he took out the battery and then insert and then everything was fine. but sometime he get into the bootloader menu and the device didn't come up. he did nothing with it, he didn't try to change anything. his device was in 1.6 android version.
i have a picture of the device in the bootloader but i can't upload it because i don't have 8 messages.
what should he do?
i have motorla defy it's different from my phone so i don't know really what to do, i guess the solution will be flashing other rom.
Hello, and sorry for the post asking for assistance!
been driving me nuts for 2 days now, it seems i'm having a major case of melting HD2
it started with the phone freezing often, reboot solved it.
then, it went to having to unplug battery for a few, and, reboot fixed it.
now i'm at a constant white screen (no htc logo)
was running in Android but tryign to just get anything working for now.
i made the sd card leoimg.nbh with a custom rom to recover it, but i can't get it to finish
in red : Radio_V2 Fail
in blue : all the rest
tried to flash radio update, failed
tried to update the HSPL version (2.8one now) but no go, it shows "success" but in bootloader shows the same old version.
what can be the cause of this, exept memory nand being screwed?
greug said:
what can be the cause of this, exept memory nand being screwed?
Click to expand...
Click to collapse
CPU and its BGA balls!
Not alot to be done i think...
Keeps coming up on white screen.
Tries to flash HSPL (newer version) finishes but it still shows the same version when powering +volume MIN.
Tried to flash a Radio, comes up with an error Radio V2 error
Tried to push a ROM on there, gives a "image file is corrupted"
Tried what i found here on the different forum threads but....seems my HD2 gave up on me...or at least it's beyond my repair skills.
Thanks for those before me who gave suggestions on what to try, it's a damn sad day i loved that phone..
wts : one slightly bricked phone
Try to do a Task29. Use the HD2 Toolkit for that.
You have to JTAG it in order to recover it. RADIO_V2 means it's radio, and it's officially bricked. There's nothing you can do other than JTAG to recover it
Well, in a way i'm glad i have the answer now about the V2 being the radio ...
Thanks for the input guys, not sure i'm going to bother with the JTAG story, already ordered a replacement for my HD2 as it is, can't spend too much time without my phone.
Anyone knows if people are interested for the "bricked" HD2's? or how to reach people?