Related
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
ANybody can help me . i have a HD2 When tried to FLASH to any RADIO from 2.07 to 2.15 all failed at 96%. I have made a TASK29 also it fails at 96%. NOW cant install anything on it !
At first 2.15 flashed and after i made task29 it stop to install. Then i used 2.07 it flash, but again i used TASK29 and now when i retry to reinstall any RADIO, it fails at 96%.
Am using tasks29 because my HD2 is stuck in LOGO HTC. So am trying many ROM file for it to WORK but in VAIN !! I still can enter BOOTLOADER. Manage to install MAGLDR and WIN7 but never the phone was OK!
I was wondering if its a HARDWARE problem?
It usually takes a long time at 96%. Try leaving it for a while and see if it will complete. Mine took some time at 95%
Crust2 said:
It usually takes a long time at 96%. Try leaving it for a while and see if it will complete. Mine took some time at 95%
Click to expand...
Click to collapse
Yep, mine hangs at 96% too. Maybe try this Task29 with Radio (check it's the right radio though)...
http://forum.xda-developers.com/showthread.php?t=1018427
If you can get into BL dont worry you'll be able to flash. Just try everything again and give loader a moment.
Ok. I waited almost 30Mins ! is that ENOUGH?
But i Found that If i flash with this ROM (that has RADIO in it) - " Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_EN " flash succESSfully but still i have the PROblEM of STUCK on HTC logo !
Again failed at 96%
Hello,
has anyone managed to resolve this problem?
I am having the same issue - radio and rom flash fails at 96%, I have tried even older radios and different roms with radio. Tried with HSPL 3.03 and 2.08.
When flashing from USB it always stops at 96% at hangs for 15mins then says fail.
If flashing from SD card then it just hangs indefinetely.
only the Duttys_Leo_Sense finishes flashes but the phone wont boot
Download this, flash it and and start from scratch. something went wrong along the way..but start from scratch and go again.
If you have trouble once you download. restart the phone holding the the power and volume down buttons. and you will get into bootloader..then connect phone and wait until it says usb and flash.
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
toreone said:
Download this, flash it and and start from scratch. something went wrong along the way..but start from scratch and go again.
If you have trouble once you download. restart the phone holding the the power and volume down buttons. and you will get into bootloader..then connect phone and wait until it says usb and flash.
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
Click to expand...
Click to collapse
Thanks - and a quick question - is this download for US or EU version?
I have a EU version.
nitko666 said:
Thanks - and a quick question - is this download for US or EU version?
I have a EU version.
Click to expand...
Click to collapse
I have not looked to see if it is for the US or EU HD2. But seeing as you have a EU HD2 you have nothing to fear really as the EU can be flashed with any radio version with no bad effects. But the US HD2 can not be flashed with any radio version with a 51 in it or it will be hard bricked. The 51 radio versions were the first radio versions for the EU HD2.
also, try chillign teh phone for twenty mins in teh freezer, then quickly reinsert the sd and try to flash. It may help you get past the last few %
Unfortunately it didnt end well
HTC HD ROM update from USB stalled at 8% for more than 30mins.
Then I tried updating it from SD card when it failed instantly reverting to factory SPL.
And then I tried to use HSPL4 to put: SPL-208 instead of HSPL208. Phone said cracked it and after that it died.
Its completely bricked now, cannot turn it on - no key lights, no lcd
odd, these devices are very difficult to brick since if you mess up, just go into bootloader mode and reflash.
slybunda said:
odd, these devices are very difficult to brick since if you mess up, just go into bootloader mode and reflash.
Click to expand...
Click to collapse
ahhh if only it was that simple. Check out the title of this thread, what you're suggesting is exactly what is failing. Look around, teh forum is stuffed full of this type of error. Sometimes it is solvable, sometimes not.
Hello, sorry for saying this but there is no solution to fix that. I had the same problem on friends HD2. It died with no reason, just rebooted. All you wrote is the same there, if you use newer radio stuck on 96%, older stuck in 97%. HSPL working ok, leoimg.nbh stuck on 8% and you getting ROM Update fail all times. That is hardware issuse and Radio ROM chip is damaged. We did not found any solution to fix that and even tryed xtc clip and all methods of instalation...
can u try flash HSPL first then the radio and then MGLDR...my problem is solve..
Hi.
I bought Hd2 yesterday, and I have a biiiig problem with it. It started perfectly - but after 5 min it shut down. It shows message about low battery, so I connected it into charger, orange led turned on. I tried to switch telephone on, but it freezes on white screen with HTC written. I tried soft-resets and hard-resets, even tried to install official rom - but installer is always freezing at 8%. I can get into BootLoader and phone is recognized by the PC after connecting USB cable. But this is all - i can't switch phone on, I can't install ROM...
What is wrong? Is it gonna work, or maybe it is totally bricked?
Radio flash stuck @ 96%
This seems to be the kiss of death for an HD2. I also have the same symptoms: stuck at 96% when trying to flash a radio. I have a US HD2 and I've flashed about 10 of these phones with no issues. This is the first one I've ever seen with this issue though. It was a friends phone that he wanted me to assemble. He gave it to me in pieces. When I assembled it, it wouldn't boot. So I flashed the stock ROM, but the flash won't complete. Fails at 8% or 11%. Tried flashing HSPL and it seems to work. But when trying to flash the radio it fails at 96% (it just hangs).
I was wondering if it has bad sectors on the partition or someting and if a J-tag service could fix this. Theoretically, it's supposed to be fixable if you can get into the bootloader. Oh well, into the junk box this HD2 motherboard goes until someone posts a fix.
I got the same problem can't not flash anything, and alway stucked at 96%.
Only thing I did to get it complete flashing radio, rom was put the phone in zip lock, and put in freezer for 10mins, took it out and plug in battery and flashing, at anytime, if the phone vibrating it will not accepting any data in, and it will stop at 96% and then i have to put in freezer again. Took me awhile to get everything boot up and got in windows 7 and play with it. But... the phone still rebooting it self, sometimes it will reboot after 5 mins or an hr when I am surfing webs or setting up the phone... Right now I am trying to get a different sim card to test out.
Seem more like hardware problem.
My problem is solved - I've got new motherboard....
NAND Toolkit
Have you guys tried to use NAND Toolkit?! it works fine for me, and never had issues flashing my HD2...
Ok so i think i bricked my phone
Here's what happend:
My ROM was freezing up on me constantly so tried a different one, but had the same effect. MAGLDR 1.13 had problems booting and so had Clockwork.
So i figured i'd flash a winmo 6.5 rom to start all over. Now when i tried to flash the stock ROM i crashed at 8% i could only remove the battery, and now its unresponsive to everything, soft rest, boot into bootloader, normal boot, charging.
I really need my phone, does anybody have an idea?
Thanks.
Greetings.
i would pull your battery
hold down volume down and red power buttone then install battery while holding
that should get you into bootloader screen
you should also post what you tried to flash and what phone u have to get to this point.
possibly get a battery thats charged completly to try
The battery trick didnt work.
I tried to get rid of MAGLDR by flashing this rom:
http://forum.xda-developers.com/showthread.php?t=623283
and then the dutch one.
At 8% of flashing, an error occured. Had to pull out my battery and my phone has not responded to anything since.
Still nobody with any ideas?
I know the help on this forum isn't much but come on, im really desparate over here.
Therk said:
Still nobody with any ideas?
I know the help on this forum isn't much but come on, im really desparate over here.
Click to expand...
Click to collapse
...when you are not able to get to the tri color bootmenu by holding volume down while starting your phone then your phone is bricked.
The only way to unbrick it, is to use a jtag adapter..not very cheap, about 200$ and more!?
Sent from my HTC HD2 using XDA Premium App
At 8%, it's flashing the radio/SPL/etc (the important stuff). Plug it in to the charger. Any lights at the top? If not, bricked.
Problem you have is sort of referred to as "stuck radio ",,,,(mostly by me, to be fair) and you aren't getting answered because there seems to be no real fix for it. Some have managed after much trial and error to get a radio to flash, but most cases seem to end with nothing but JTAG or new mainboard.
Something that came up recently was flashing the 2.07.51 radio (not for tmous phones! ) so you could give that a try. Be interested in your results.
you could also try the "sd and sim and battery out, chill the phone in fridge/freezer,sealed in a bag, rom/radio image on the SD ready to flash" method. If this works then you have heat induced hardware failure.
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].
posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265
Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL
Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.
now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!
Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?
jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!
boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk
Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.
Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..
Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!
My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS
Hello XDA.
Huge problem over here.
I can't flash anything on my device (HD2, Europe) anymore.
Newest Radio-Rom, SPL-2.08.HSPL.
Tried everything listed in the forums, event tried to flash stock leoimg.nbh from sd. nothing.
Whenever I try to flash via USB, the screen is stuck at 0 % (independent from what I try to flash).
HSPL won't let me reflash it, get an error msg.
When flashing from sd, stuck at "loading..."
Hardreset (VolUp+VolDown+Power) works, but doesn't change anything.
I really tried E-VERY-THING, nothing seems to work.
Bootloader is starting up, even the white screen with the green HTC logo is showing up, but then: nothing.
Worked my ass of through hundreds of threads in dozens of forums.
This is my last chance.
Anybody? Thank you!
schousta said:
Hello XDA.
Huge problem over here.
I can't flash anything on my device (HD2, Europe) anymore.
Newest Radio-Rom, SPL-2.08.HSPL.
Tried everything listed in the forums, event tried to flash stock leoimg.nbh from sd. nothing.
Whenever I try to flash via USB, the screen is stuck at 0 % (independent from what I try to flash).
HSPL won't let me reflash it, get an error msg.
When flashing from sd, stuck at "loading..."
Hardreset (VolUp+VolDown+Power) works, but doesn't change anything.
I really tried E-VERY-THING, nothing seems to work.
Bootloader is starting up, even the white screen with the green HTC logo is showing up, but then: nothing.
Worked my ass of through hundreds of threads in dozens of forums.
This is my last chance.
Anybody? Thank you!
Click to expand...
Click to collapse
If you've tried literally everything as you claim, then nobody can possibly help you. Have you tried flashing a stock ROM via the SD card?
schousta said:
SPL-2.08.HSPL.
.......
the screen is stuck at 0 %
Click to expand...
Click to collapse
are you 100% sure its 2.08.hspl and not 2.08.0000?
also, tried different usb ports? different PC even, if possible? (not 64 bit either, if you can manage it, , , an xp machine is perfect)
Probarly your phone is bricked yes.
You say you tried everything and nothing worked, then i think there is no option left. Maybe put it in the fridge or something for like 10 minutes?
To all:
I'm sure, its hspl 2.08, pic of bootloader on its way.
I tried Stock ROM from sd. Stock oben AND provider one.
Tried 2 different PCs. Will try XP 32bit when possible.
Please tell mehr, that here's a german Euthanasie a jtag device... or pleeeeease name another option...
Thanks...
Oh my god, Not "Euthanasie" i'm so sorry...
Damn autocorrect... meant "with"...
Have you tried this version: http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
to reflash HSPL2.08
Please fill in the blank(s):
Your device was working fine, and you could flash anything. But recently you _________________ and now you can't flash anything.
Dblfstr said:
Have you tried this version: http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
to reflash HSPL2.08
Click to expand...
Click to collapse
Tried it. Outcome:
:/
Marvlesz said:
Please fill in the blank(s):
Your device was working fine, and you could flash anything. But recently you _________________ and now you can't flash anything.
Click to expand...
Click to collapse
... recently I tried to flash a whole new ROM. RadioROM was ok.Task29 went good, MAGLDR had problems. First time stuck at 4 % (Connection Error 262 (?)), second time at 96 % (also connection error), third time I held the data cable in the port, not too strong, but it worked this time. MAGLDR booted, but didn't show any options, just the header. So i did another Task29. From this time on, nothing worked anymore. :/
Anyone?
Thanks in advance!
EDIT: Also trying another sd-card atm, doesn't seem to work...
Sorry for double-posting,
but i was able to re-flash radiorom via sd. maybe this helps.
Drowzz said:
Probarly your phone is bricked yes.
You say you tried everything and nothing worked, then i think there is no option left. Maybe put it in the fridge or something for like 10 minutes?
Click to expand...
Click to collapse
This is the most stupid bit of dangerous "advice" I've ever heard. Not only is a phone not "bricked" as long as the bootloader is working, but more importantly, "put it in a fridge" has never done anything good. It's an urban legend. If you feel like it you can try it on a broken harddisk right before getting out the black candles and the chicken blood, but it's completely useless.
schousta said:
but i was able to re-flash radiorom via sd. maybe this helps.
Click to expand...
Click to collapse
Have you tried a different USB cable? Everything points to the connection, maybe your phone's USB port is shot.
Wouldn't this have been solved when flashing over sd-card?
RadioROM worked this way, whole stock package does not.
Tried different usb cables, different pcs. and different stock roms over sd.
so chances are good it's not bricked, if the bootloader works? I mean, it even boots to the green htc logo on white bg....
thanks
EDIT: Also, usb-port worked fine before flashing, it also works now, bootloader recognizes "USB".
EDIT2:
MTTY changed nothing. Task29 was succesfull (it seems), tried task 2a (that should format the WHOLE thing, like i unterstood) and 28, too, seemed succesfull, too, but my problem remains.
and why the hell can i flash a radio from sd but not a full stock rom? sd card is formatted in fat32 and 2 gig sized... tried all official roms...
and hspl still throws this error....
EDIT3:
Set up a VM with Win XP 32 bit. HSPL doesn't throw an error now, but it seems to take forever to install. Almost 10 Minutes and counting.
is this normal?
Didn't work.
Dont know what else to try, if nobody answers...
Think about sending it in to get JTAGed (Bootloader rewritten...)
Dr_Grip said:
This is the most stupid bit of dangerous "advice" I've ever heard. Not only is a phone not "bricked" as long as the bootloader is working, but more importantly, "put it in a fridge" has never done anything good. It's an urban legend. If you feel like it you can try it on a broken harddisk right before getting out the black candles and the chicken blood, but it's completely useless.
Click to expand...
Click to collapse
Why? I've seen it working. A friend bought a broken HD2, the seller said he couldn't flash anything and he had problems with camera and games before. So after dozens of tries, he put it into the fridge for half an hour and managed to flash magldr and a new rom. Well, the motherboard was faulty and he couldn't do almost anything because the phone suffered constant freezes and restarts when doing anything else than looking at the homescreen, but well, the fridge helped him a bit.
USB Port on the phone, USB Port on the computer, USB Cable, Drivers in the computer, Firewall or similar host security software on the computer - these are some of the things I'd double-check.
But a ROM in nbh format should still flash from SD- what exactly happens, does it not find it or not complete the flash? Does it throw any error code?
And did you see any bad blocks while on mtty?
ph03n!x said:
USB Port on the phone, USB Port on the computer, USB Cable, Drivers in the computer, Firewall or similar host security software on the computer - these are some of the things I'd double-check.
But a ROM in nbh format should still flash from SD- what exactly happens, does it not find it or not complete the flash? Does it throw any error code?
And did you see any bad blocks while on mtty?
Click to expand...
Click to collapse
No bad blocks, will check it again.
As said, USB-Port on phone seems ok to me, used 2 different drivers on 2 different pcs with 2 different data cables and 2 different OS. Firewall and Antivir disabled.
When flashing from SD leoimg.nbh seems to be found but it gets stuck at the grey screen with the blue "loading...". forever. no error code, not even an option to confirm or cancel the flash. cancelling the loading process with voldown failed. tried three different sd cards and all official stockroms that could possibly come in question for my phone.
But why was I able to flash the latest radiorom again?
schousta said:
No bad blocks, will check it again.
As said, USB-Port on phone seems ok to me, used 2 different drivers on 2 different pcs with 2 different data cables and 2 different OS. Firewall and Antivir disabled.
When flashing from SD leoimg.nbh seems to be found but it gets stuck at the grey screen with the blue "loading...". forever. no error code, not even an option to confirm or cancel the flash. cancelling the loading process with voldown failed. tried three different sd cards and all official stockroms that could possibly come in question for my phone.
But why was I able to flash the latest radiorom again?
Click to expand...
Click to collapse
Beats me. How long it you wait for the full ROM to flash though? I know you have tried a bunch, and am sure you would have waited long enough, but asking just in case. It might take as much as 10 minutes or more.
But ya, at the moment JTAG seems to be your best bet.
waited for almost 1,5 h now for an sd flash...
jtag seems more and more acceptable...
If tag is available, go for it.
There are a few variants of this problem, that I think of under the umbrella name of "stuck radio"
Usually its the radio that gets stuck, but sometimes the spl gets stuck too, or sometimes just the spl. Either way, some types of flash work whilst others don't (radio works hspl doesn't for example, or custom roms flash stock rooms dont ), or a flash seem to work but nothing changes, (hspl gives hacked it but spl doesn't change,or the flash hangs...
My guess is two causes, some being corruption of the software, some actual hardware...bad blocks at a critical area of memory perhaps.
There are one or two success threads with this family of problem, but hundreds with no successful outcome. Sometimes just flashing the oldest correct rom from SD does it, sometimes freezer trick works, (not an urban myth), sometimes just trying again and again works. Often though, nothing does, so if jtag is an easy option I'd take it.
Be warned though, it could be hardware, in which case it may not work.
schousta said:
... recently I tried to flash a whole new ROM. RadioROM was ok.Task29 went good, MAGLDR had problems. First time stuck at 4 % (Connection Error 262 (?)), second time at 96 % (also connection error), third time I held the data cable in the port, not too strong, but it worked this time. MAGLDR booted, but didn't show any options, just the header. So i did another Task29. From this time on, nothing worked anymore. :/
Anyone?
Thanks in advance!
EDIT: Also trying another sd-card atm, doesn't seem to work...
Click to expand...
Click to collapse
^This.................. with that v
samsamuel said:
If tag is available, go for it.
There are a few variants of this problem, that I think of under the umbrella name of "stuck radio"
Usually its the radio that gets stuck, but sometimes the spl gets stuck too, or sometimes just the spl. Either way, some types of flash work whilst others don't (radio works hspl doesn't for example, or custom roms flash stock rooms dont ), or a flash seem to work but nothing changes, (hspl gives hacked it but spl doesn't change,or the flash hangs...
My guess is two causes, some being corruption of the software, some actual hardware...bad blocks at a critical area of memory perhaps.
There are one or two success threads with this family of problem, but hundreds with no successful outcome. Sometimes just flashing the oldest correct rom from SD does it, sometimes freezer trick works, (not an urban myth), sometimes just trying again and again works. Often though, nothing does, so if jtag is an easy option I'd take it.
Be warned though, it could be hardware, in which case it may not work.
Click to expand...
Click to collapse
Looks like we have a winner ....
You said "flashing a Radio was OK" .. so we shouldn't be having a problem there. Also, a task29 went good, too.
You started having those problems during MAGLDR, but after you held the cable, everything went fine.
So in other words, during attempt 1 & 2 of MAGLDR flashing, you pulled the cable.
I know that pulling the cable midst a radio flash will 99% cause a brick.
Same with ROM with a Radio (but less chance).
But MAGLDR, I don't really know, maybe sam will help ?