Related
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
ok let me start by saying im new to this type of thing
Basically i have been wanting to get some cool apps and themes etc for my HTC HD2 T-Mobile uk phone for a while now.
I searched and found this awesome site etc..
After messing about for a good 3-4 hours on finding what means what i got windows mobile downloaded lots of Roms and alot of head scratching figuring out what it all means.
After alot of messing about i got Windows mobile to reconise my phone and i flashed my phone and put a Rom on (which i cant remember which now>_< )
Then the problems started to happen, Windows mobile stopped detecting my phone altogeter.
So i tried changing USB ports/Activating faster sync in the phone settings and trying over and over, Nothing!!
So i thought i would restart my phone and computer.
Restarted my computer and looked to see my phone had got stuck on the boot screen. After 10minutes of waiting for the phone to start i took the battery out and tried that and same thing over and over.
I then tried holding down volume buttons and reseting and it finally started after i reset it.
I i thought i would restart it again and the same thing happened! so i thought i would try a hard reset.. Done that and nothing, still the same thing >_<
Now im stuck with a crap interface that i can't use and i can basically never turn my phone off because it gets stuck.
Please someone help this noob out and put a end to my frustration on what to do!
right sounds like you havent got the right radio for you're ROM,
Can you remember what ROM it was you flashed? if not shouldnt be to much of a struggle
turn you're phone off hold the volume down button and keep holding turn the phone off, and if you get the coloured screen you're safe and we can sort this out
the first mistake many people make is flashing an all singing and dancing cooked rom and think that's it.
if a rom unlocks the extra ram, (or says tmous compatible, or says the rom Is based on 2.x..).they all mean the same thing - the radio must be a tmous radio, i.e. one with ..50.. in the version number.
all non tmous phones come with radios with ..51.. version numbers, and hence boot problems until you change the radio.
(think yourself lucky, if you flash our radio to a tmous it kills the phone)
next time, read the rom thread for recommended radio. it will be in the first or second post.
I haven't had time to sort this out until today and im so confused and just need some help explaining what and how i will do this.
My phone doesn't boot unless i hold down the volume buttons and reset it and then wait 5minutes for it to restore everything.
From what i gather i need to change my Radio rom so my phone starts properly.
Ok i get that .. but how do i put a radio rom on my phone if my PC does not reconise the phone in windows mobile? (just says not connected)
I can get the phone to show up on my computer if i change it to "disk Drive"
but not if i use active sync.
So please someone explain to how i can get my phone showing up so i can put a new Radio rom on to my phone using windows mobile?
I appreciate any help thanks
you can flash from bootloader. phone doesnt need to be booted.
boot into biootloader, flash the radio, done.
HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.
i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.
Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l
I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted
i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!
I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.
have you tried loading a rom from the root of your memory card LEOimg.nbh?
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.
hi there, im new here and ive been searching on the forum for a long time, but i didnt see any solution for my problem... (or maybe i was blind) so when i was trying to flash back original ROM from bootloader screen through USB, it didnt show my current image version info on the screen, but it did show the image version that im going to upgrade... however, i still let it updated and it said its succeed. but when my phone going to reboot, it stuck on the "stick together" screen... btw, my phone is PB81120 SS-B3 SPL-2.08. HSPL 8G XE. hope someone can help me solve my problem... thanks first :]
Go into bootloader again and connect the device to your PC via usb (should show USB at the the bottom in bootloader) and run the Rom Update Utility again. But first make sure the ROM is compatible with TmoUS Hd2.
I would recommend flashing stock from the bootloader just to be safe.
but i was trying to install T-Mobile_HD2_MR_Software_2.13.531.1 under bootloader, and it still the same... :[
Was that what you origonally tried updating to? Or was it a custom rom you had tried?
Sent from my HTC HD2 using XDA App
that was the latest i tried to updating to, or any different kinds of version of original ROMs... before, i tried to update a custom ROM on it first, but it failed :[ actually, when i first got my phone it was unlocked, so while i was waiting to get the unlock code for it, i decided to install android on it... later on i had successfuly putting android on it, and by that time i got my unlock code too. then i typed it in and my phone just reboot and stuck on the "stick together" screen till now... so i started to look through the forum and found out that most ppl said is to reflash the ROM back to the original one first, and then everything would be alright... but i guess it didnt work on my phone D:
Have you tried a hard reset? (Hold both volume buttons while booting)
Sent from my HTC HD2 using XDA App
yeah... i tried everything :[
hi,
don't worry, your problem is resolvable. (as long as you see something on screen, you are lucky.)
1) When the stick together screen comes, do you see any numbers on left bottom after waiting for some time say 1 min.
if yes, then your problem is missing OS image only.
in this case, take out the battery. after that, keep volume down pressed all the time and insert battery again. press power button, if mobile does not start immediately. please keep volume down button pressed till the time tricolor screen does not come on. after that connect cable to computer and update normally.
2) If you don't see any number, it may mean multiple things, which all are resolvable. (most likely bootloader stuck in another mode.)
in any case, try steps in given in 1 and report back. before reporting back please install mtty on your computer as it is needed to send commands to mobile to get out of this mode.
Try this: http://forum.xda-developers.com/showthread.php?t=668347
Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
SS and HX in the bootloader screen just means Samsung or Hynix, , two chip providers HTC uses. They do the same thing, and you can forget about that for now, you have much bigger issues than one chipset being slightly better than the other.
The pink on black screen is a splashscreen, anyone recognise it? winmo? android?
The HTC website started dropping support pages for the HD2 a month or two ago, , looks like its ancient history as far as HTC are concerned.
Qualcomm MSM,,, this is a bad sign, , it is what the bare chipset presents itself to the usb connection as when there is no controlling bootloader. (This is what tmous users get when they radio brick their phones). Quite an odd symptom to see in a phone that powers on.
From the various power / boot symptoms, it sounds likely that one or more of the following are true
1 - the battery may be low on charge, and if magldr is installed the battery wont charge until android is running (which of course it cant) so you NEED to get magldr off ASAP (if in fact it flashed)
2 - the radio may be corrupted, which usually manifests itself as flashes failing at 8 - 10%, or radio flashes never completing.
3 - The phone may be one of the unlucky ones that has/is cooked/cooking itself. have a read on the 'freezer trick' where you cool the phone down for a while in a bag in the freezer, then quickly flash from sd as soon as you take it out, so the chips don't overheat before its done. If this turns out to work, then the phone has hardware issues.
4 - The bootloader itself may be corrupt, but only slightly (just theorising now) or the NAND memory where the bootloader is stored could be starting to degrade.
Recommended way forward.
Assuming you have access to a card reader,,,
send me your IMEI and an email address, and ill generate you a Goldcard.img,
follow THIS to make teh goldcard and place on that goldcard the RUU_Signed.nbh (renamed to leoimg.nbh) extracted from, , lets go for the WWE 3.14 rom from HERE (Lotta junk in that folder, scroll way down towards the bottom, look for filename as below)
id go for
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.zip
down towards the bottom.
(Thats assuming you want english? theres probably a DE one if you prefer)
SO, id try flash that from the goldcard, and report back.
(Note i'll be on and off all day, so don't expect an immediate response to your IMEI, cheers, oh and the .img when i send it will most likely get spam foldered, so dont miss it!)
I created a goldcard myself and tried the image inside "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.zip".
While flashing it showed me "RSA Fail" on "Radio_v2".
Any ideas? I'll try other ROMs till someone answers
Thanks,
iCEQB
EDIT1:
Trying "GER" Roms:
1 test) HTC_HD2_RUU_Leo_HTC_GER_1.66.407.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe - "RSA-Fail" on "Radio_v2"
Ahh radio fail, bad news. I've seen it cured once or twice, by flashing the phones original rom, but I suspect those were exceptions.
I've also seen failed flashes take when you well chill in the freezer (card sim and battery out while it chills) and quickly flash on removal.
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
samsamuel said:
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
Click to expand...
Click to collapse
Yeah I used the wp7 config. Is it bad? I mean, the goldcard works right?
test 2) RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe - "RSA-Fail" on "Radio_v2"
I'm out of ideas guys ... will wait for you to create me a winmo goldcard image and try them again.
Last resort is the freezer trick. Or any other ideas on how to progress from here?
Regards,
iCEQB
EDIT: BTW, does HSPL need to be deinstalled for these goldcard actions?
Ohhh hang on, that img i sent wont work, silly me, its not the imei I need, its the Cid (unique serial, uid, goes by a few names) of the SD card. See the howto I linked ya for how to find it.(really easy if you have access to any other winmo phone, not so easy otherwise.)
Just shows how long its been since I thought about goldcards.
Sorry.
Which branded phone is this?
Brother even I have same type of logo when phone starts (pink colour circle)
Even my phone is bricked but I can install wp7 or android (only no network problem)
Can u guide me how did u solve this issue pls
Thanks & Regards
SE_iCEQB said:
Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
Click to expand...
Click to collapse
Do a jtag on it it will fix everything i think
Sent from my Nexus 7 using xda premium