Related
need help from you guys.
my customer came to me with BOOTLOADER Screen 5.17 GSM OK, so i upgrade using SD (Patch ) and upgrade rom 3.17..., and radio 4.21,
After all complete, setup screen is come out, but i cant get out from Alignn Screen.
Can this problem solve using Software Sulition?? or it have Bad Screen ???
When i test using TEST Menu, touch test said PASS.... ???
how can it be ???
please Help
Mine is doing the same do a reset and then leave it for about 5 Min's at the loaded screen
The tap screen and then try to do align if it freezes again reset and try again sometimes it takes me 2 or 3 times to get it done
Once done it works fine until next hard reset
Only started doing this recently don't know what is causing this
Good luck
Jules
still havent suceess here.... need help
still havent suceess here.... need help
i can manage the problem by resoldering Caps around its connector.
Thx u
Please be more clear
Hello mrgsm
Please tell more clearly what you did, where exectly did you resolder?
I have the same problem.
Did the problem go away when you resoldered?
brgds
Svend_e
please help i have the t-mobile mda compact pm200 and i was removing a cracked version on pocket dos v1.09 from the remove list and it said windows wil need to perform a soft rest yes or cancel i clicked yes and my system restarted but now it just get stuck at the t-mobile screen. i have tried doing the manufatures hard reset but no joy i have take out the battery no joy and i can't even access it through my p.c what can i do to get it up and running again i don't care about the data already on there cuz it is all backed up on my sd cad
When you took out your battery, have you been waiting til the backup battery fully drained out? It takes about 30-60 minutes, better leave a few hours. Try this and post your results...
thank for trying but unfrtunatly it had no effect i tried for two hours then reinserrted it and no joy so i waited a further day but still nothing any other ideas tnx
Is it getting into BootLoader? Then you might try Flashing a new ROM!
how would i go about doing that? my computer won't even recognis3e my phone
I had about the same problem:
I was trying to install the Pocket PC Greek language support (free trial version) from the site http://greek.pocket-pc.penreader.co...der_Greek.html. on my MDA Vario Tmobile when it crashed!! It shows just a white screen and does nothing at all!! I soft and hard reseted the device but after restarting it shows the Tmobile screen and after a few seconds a white screen! Actually I am not so sure that the device is hard reseting because it doesn't ask me for a confirmation of the hard reset. When I startup my device it stops on the same white screen.No windows loading, no other commands accepting, not recognized by my desktop.
Did anybody have the same problem before? Does anybody know how can i get my PPC on working condition again
Thanks dagonist.
I hope somebody can help....
See for ROM upgrades on the forum :wink: if u get some images on the mini then it's not dead! It's just stuck at the bootloader mode, meaning that the OS is somehow damaged.. To solve this prob u must plug the mini into the pc (it will be recognised as an unidentified device, don't worry), then download a ROM upgrade set (u will find these on the net or in the xda-dev ftp). Execute the prog, wait 'till it finished and voila! Ur device will come as new If u encounter problem do a simple search in the forum regards rom - bootloader - upgrade and u willl find a lot of infos :wink:
Hope this helps, MocciJ
Thanks MocciJ.....but my desktop pc doesnot "see" my pocket pc at all!!
:? then it isn't yet in bootloader, is just stuck at the beginning of a broken OS! I mean that it tries to load the OS, but then it gets stopped since he read bad ROM (probably deleted in some way since u encountered this prob removing a prog) try to get it in bootloader mode, by pressing together the camera, power and reset buttons.. U will lose all the things in the RAM memory, but in this case u really can't do anything else.. After entering in bootloader, u can easily upgrade it..
MocciJ
Well, I just tried the camera button+power button+reset button....and nothing happens! It reset and comes back to the same white screen...
Any other suggestions??
well, did u tried to make it correctly? I mean: for entering boot loader u havce to press camera + power, and then reset (with camera and power pressed) if u can't still enter the bootloader, then I'm out of ideas, sorry...
MocciJ
I amdoing it write but nothing happens....
In the screen what can u read? If u read serial (it is barely visible) then see if it turn to usb when u connect the cable: if yes, we 're at a very good point...
When it starts up it shows the Tmobile logo and then for a few seconds :
ipl 1.08
spl 1.08
gsm 01.09.10
(something else...)
after a few seconds a white screen without any letters or anything else.
But I cannot see it anywhere on my desktop pc...
:? I can't figure out how you can get it back.. If it displays images and text, then the bootloader is still alive.. It even tells u the correct version of the complete ROM.. but I wonder why it can't access to the bootloader.. u must search in the forum how to reach the bootloader, but I'm sure of the power camera reset combination; when u can read SERIAL or even better USB on the device, u probably have solved most of ur problems, but chances are that u have even bad clusters of ROM, and cannot be restored with an upgrade (it happened to the External Rom of my mini after a bad upgrade)
I suggest to send it to repairs, before doing somewhat wrong, because if there is an original ROM inside they will repair it for sure, free :wink:
MocciJ
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/guaranty repair....
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/warranty repair....
seee i tried all of thoose things but i found the main problem was getting the computer to recoginise the thing and the program i put on was a cracked version ( i know i am a naughty boy) so if i send it off they could cause legal problems couldn't it
it depends on what u are meaning by "not recognised" but I assume that windows dosesn't even try to recognise the device (I mean that there aren't bubbles, notifications, or any other changes on the system) for the cracked software, well if u have installed it right into any RAM folder (not in the storage memory) then u can tell the repairing center that ur unit simply doesn't power on correctly.. :wink:
MocciJ
hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
biker200 said:
hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
Click to expand...
Click to collapse
Try this:
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
I also had this once when I bodged up a custom ROM and just reflashing with a known good ROM sorted it out, must have been lucky there.
Good luck.
thank you very much what solve the problem is bl update 1.2
thank you very much what solve the problem is bl update 1.2
Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.
did you try a hard reset ?
Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.
Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.
I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.
Can any one help me in this regard please.
I am having the same problem, but my phone is not sim-locked.
I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated
Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.
ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!
Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck
Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.
mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks
(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452
hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin
Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.
collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)
Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.
just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...
hi mithun, mUNS , ABEBRAKER , very sad man..! i was trying to update to WM6.1 now the phone is stuck in boot logger screen...! nothing else happeninig ..! any idea whT TO O....?
Gene stuck on boot logger , pics & video attached
This is how scary it becomes....
gene stuck
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
bryangopan said:
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
Click to expand...
Click to collapse
do some search before you open up a new thread brother. anyways, here's a possible solution (you may have to try it out coz i never found myself in this situation)
this thread (http://forum.xda-developers.com/showthread.php?t=366505) has one solution (http://forum.xda-developers.com/showpost.php?p=1915254&postcount=5) from orefkov which may help or this thread (http://forum.xda-developers.com/showthread.php?t=351234) from nirvana might help too
hope this helps in recovering your gene. also i suggest going further, you should get into flashing or cooking only if you know what you doing
gene boot issue
Man as you know i am already running wm6 by muns ...! so that means i have done it before... this is really strange ..! i was worried. I am stilll worried...let me go through ure links...i'll let you know..!
Thank you
Stuck from boot loader resolved
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
rex4u said:
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
Click to expand...
Click to collapse
refer to my you tube video buddy , all info is given there ...
http://www.youtube.com/watch?v=R53104JTgNI
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
rex4u said:
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
Click to expand...
Click to collapse
will do that soon
Tnx
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
TNX buddy for sharing this information ..I also face this problem today but as I already read ur post ..I knw wat to do ..tnx man
i faced error INVALID VENDER ID when flashing at 2%
i don't know how to upgrade please help me
i have the same err
snggwt said:
i don't know how to upgrade please help me
Click to expand...
Click to collapse
I guess your spl is giving you the trouble. search for olipro"s CID unlock file , you should be ok after this .
How can one make sure that the battery is more than 50% charged when the phone is showing the bootloader screen... If I keep it for charging in that state, does it get charged?
Please help
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
@bryabgopan just a road down memory lane for u
hi
i dont know if u remember long time when i sent a PM to u asking help to upgrade my 3400i u gave me a very rude reply and said its not rocket science and to look around but i see u asking for help
so its different when u need help and some one else asks u for the same im saying this because ur words then really hurt me its happened around 3-4 months back
so my humble request to u is if u cant or dont want to help just say it in a nice manner and not in a rude manner see u wanted help and u can see people trying to help u here
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
krazy_about_technology said:
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
Click to expand...
Click to collapse
LOL you are even answering to pple posting in the wrong Section
Hard Reset not working HTC P3400
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
manisharma31 said:
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
Click to expand...
Click to collapse
hi
try this
if ur phone comes on connect the USB cable to phone and see if u get the USB words on the phone if so good try flashing any other rom from ur PC to ur phone
goodluck