hi mithun, mUNS , ABEBRAKER , very sad man..! i was trying to update to WM6.1 now the phone is stuck in boot logger screen...! nothing else happeninig ..! any idea whT TO O....?
Gene stuck on boot logger , pics & video attached
This is how scary it becomes....
gene stuck
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
bryangopan said:
now it shows the colour screen after i press and hold power and camera keys...!but flashing gets interupted in 2 % saying image is corrupted ... i dont have the original rom....
Click to expand...
Click to collapse
do some search before you open up a new thread brother. anyways, here's a possible solution (you may have to try it out coz i never found myself in this situation)
this thread (http://forum.xda-developers.com/showthread.php?t=366505) has one solution (http://forum.xda-developers.com/showpost.php?p=1915254&postcount=5) from orefkov which may help or this thread (http://forum.xda-developers.com/showthread.php?t=351234) from nirvana might help too
hope this helps in recovering your gene. also i suggest going further, you should get into flashing or cooking only if you know what you doing
gene boot issue
Man as you know i am already running wm6 by muns ...! so that means i have done it before... this is really strange ..! i was worried. I am stilll worried...let me go through ure links...i'll let you know..!
Thank you
Stuck from boot loader resolved
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
rex4u said:
Wow ! Now this is what i call "life saving medicine". Thanks for giving it !
I am referring to Ghost image.What exactly it is and is it safe even after flashing ? Finally what is power cycle(Is it complete discharge of backup battery).
Thanks again buddy
P.S. Can u give HTC Bangalore number. Thanks.
Click to expand...
Click to collapse
refer to my you tube video buddy , all info is given there ...
http://www.youtube.com/watch?v=R53104JTgNI
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
rex4u said:
Thanks a lot buddy to take up so much of pain and posting this video.
Can I ask a little favour - plz post this video here so that I can download it and keep it.Embarassingly my net is extremely slow so I could not watch it smoothly.
Plz if u can.
Thanks once again bro'.
Click to expand...
Click to collapse
will do that soon
Tnx
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
TNX buddy for sharing this information ..I also face this problem today but as I already read ur post ..I knw wat to do ..tnx man
i faced error INVALID VENDER ID when flashing at 2%
i don't know how to upgrade please help me
i have the same err
snggwt said:
i don't know how to upgrade please help me
Click to expand...
Click to collapse
I guess your spl is giving you the trouble. search for olipro"s CID unlock file , you should be ok after this .
How can one make sure that the battery is more than 50% charged when the phone is showing the bootloader screen... If I keep it for charging in that state, does it get charged?
Please help
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
@bryabgopan just a road down memory lane for u
hi
i dont know if u remember long time when i sent a PM to u asking help to upgrade my 3400i u gave me a very rude reply and said its not rocket science and to look around but i see u asking for help
so its different when u need help and some one else asks u for the same im saying this because ur words then really hurt me its happened around 3-4 months back
so my humble request to u is if u cant or dont want to help just say it in a nice manner and not in a rude manner see u wanted help and u can see people trying to help u here
bryangopan said:
Man i called htc service centre here in bangalore , they gave me a simple solution for my problem...
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Click to expand...
Click to collapse
krazy_about_technology said:
Start the phone in bootloader without connecting the cable. NOw press the powerbutton for a while to shutdown the phone completely. Then plugin the cable or charger, it will start charging without getting started. Charge it for sometime, or to be on the saferside, untill the light turns into gree from amber.
Click to expand...
Click to collapse
LOL you are even answering to pple posting in the wrong Section
Hard Reset not working HTC P3400
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
manisharma31 said:
I have Hard Reset my HTC P3400,but it hangs on the boot screen.
It show on the screen as,
ONBL 1.07.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.9.1.1
I kept the mobile on battery for at leats 5 minutes but no success.
What do i do now ?
Click to expand...
Click to collapse
hi
try this
if ur phone comes on connect the USB cable to phone and see if u get the USB words on the phone if so good try flashing any other rom from ur PC to ur phone
goodluck
Related
i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx
about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse
epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.
Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
try this
hi
i briked my phone a few days bak ie phone totally dead no screen action if this is ur problem try this
switch phone off take battery out hold power buttom for a few mins then put batt back holD camera button and then power on u will get tricolor screen use usb and flash new ROM or hold camera and do soft rest with stylus this will also give u try color boot screen ( also see my thread at gene upgrading it says hone dead )
goodluck
dallos said:
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
Click to expand...
Click to collapse
still nuthing happens ??? if u can tell me wht i should do in steps
1. Remove battery
2. Press and hold the power button for 5 seconds.
3. Replace battery
4. Press and hold the camera button & power button.
5. Poke "reset" with the stylus, you will get the tri color screen.
BTW flashing WM 5 was a bad idea . The gurus have suggested against it repeatedly.
u flashed ur SPL
what i knw from this is that u have flashed ur SPL using the WM5 ROM...try ti get tricolor screen as explained by Haree and see what SPL is showing on the screen....
after that we can see which ROM is suitable for u or how to flash new SPL on ur phone....
From the serial number it can be guessed (nor confirm) that ur is new gene...so read sticky's post of unbricking....
tell me wheher ur gene came with windows 6 preloaded?
the problem is i tried all this but i dont get to the boot screen
nuthing happened when i do this ... some ppl told me 2 try the JTAG method but i dunno how 2 do it ??
if Any1 could explain 2 me how 2 do the JTAG Method it'll be gr8 ....
ma mail is [email protected] ...
thx for ur help in advance
hey guys weird thing has happnd to my JasJar firstly the screen is crashed so i cud barel seen anything in dark but thru sunlight i cud see things on my phone
later i installed a rom from here i dont remember wich one it dont get start up it just stucks up at imate screen (that blue color 1) it doesnt go further from that
and no response from my phone pls help as i dont have any mobile right now ... pls help me out guys.. cud i ever make my JasJar live again??? i wish if the phone was on to install the original rom from the webstie or any rom from here to make it work ......
thnks and hoping for a good reply.. fingers crossed...
drift_amit said:
thnks and hoping for a good reply.. fingers crossed...
Click to expand...
Click to collapse
First of all welcome to the forum... and it's not a big deal and for sure your JASJAR will be rocking... ok did you try to flash the rom in XP(it's more easier) did you follow all the steps properly ... if yes try docformat and install another rom... and see wiki for additional informations and instructions....
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
cheers
Rajiv
thnx dude.. but for this my JasJar must b detected by my pc... and i had used it in Xp earlier and now i have vista Installed (any big deal ??)
now while upgrading again wud make it in working???
Yes you can flash in vista
do a search and you´ll find the way!!
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
drift_amit said:
sorry but my device just restarts( i mean just comes back to splash screen where i can see only imate and the rgd versions) when i try to enter the bootloader mode.. plss help me out guys
Click to expand...
Click to collapse
Ok press the backlight button and power button.. and after that press reset button but still holding both buttons ( backlight & power)... try it few times and you'll succeed... and one more think press the backlight button only and power button only to check if they are working correctly or not ....
Cheers
Rajiv
ok.. now.. by reading other forums and formatting tips of Universal on Vista ... and all other wiki information the original imate rom from the website.. damn it is installing now.,.. and my fingers are crossed .. it is installing and am waiting to finish it
Hello masters.
I am very new for repair gene p3400i
Gene P4300i speaker on & off problem already I post this problem.
I am try for upgrade ROM . last day I run test SPL unable to run then I removed from mobile test spl. To day I connected gene to pc for battery charge I am verifying how to run gene_hspl_HT8x. not installed and not run. After some time I have seen mobile is dead only 3lights on glowing at power call key and end key. Then I removed battery put it back when power on 3lights are blinking. I tried to put boot mode by press camera and power no boot mode .
Please kindly know me the problem and solution.
have u tried to get in bootloader ??????
yes i tried to get bootloder ,press & hold camera key and power . but not gets bootloder.
first thing are u sure that ur battery is charged enough to boot ?? then
remove battery and then press on button for few seconeds then put battery back and then hold camera button and then press on button . if u get into boot loader then tell waht it shows on screen .
if not then tell again.
after wash and dry mother bord now working . but problem hands free on . if off mode also.
i think its a hardware related problem not a software problem.
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari
Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader