A while back I got the Mytouch 3g fender edition from T-Mobile and tried to root then flash a ROM to it. It shut off and never turned back on. I've tried everything but as of today I got it back out and tried again. I noticed when I plug it in I get a orange light (1st Picture) and if I hold the ball and power button the light turns blue (2nd Picture) As for that nothing else works. Any body know how I could get it working again? I will try anything to get it fixed.
In advanced, thanks for the help!
me too
i have the same situation , but what i did , i eras all thing from fastboot : fastboot eras bootloader , hboot , recovery .... then when im reach the flash step order i restart phone by mistake .........
i think now the only fix is the (( JTAG )) BOX , plz let me know if u found another way to fix that
Related
ok i have a issue with my fone my phone is stuck on the tri-colored screen which says:
TITA100
SPL-1.20.01ipro
well i am as u can see im not good with tech. stuff like this but i would like sum advice or ideas on how to fix my problem. well here is how it all happened. my fone started off fine, out of the blue it started turning off by itself, then coming back on. it will reboot fine then as soon as i touch the screen or try to text or call it shut off on me. first i thought my battery was dying. that didnt work kept it on the charger switched out the battery, still nothing ended up doing the same. so a fren told me to hard reset or press the ok button pwr n the reset button at bottom using the stylst. now im stuck in bootloader mode after i ran a program:
HARD-SPL-MFG
and was told to flash the fone, which i had no idea what to do the person who was helping me i didnt hear frm again n i was stuck in this tricolored screen what should i do? i just want my phone up and running so i can use it once again...if thats possible..it be great i love the phone n dnt want the money i invested into it wasted
thank you soo much,
If I had to guess, it sounds like you have installed a SPL that is not compatible with your existing radio and rom.
First thing is I would try downloading the stock rom for your phone, I believe you can download this from HTC's website, I would download the newest and the one prior to it. Try installing the older of the 2 first since your SPL that you do have is older, and if it fails to install, then try the newer of the two.
If it still fails, come back here and I'm sure somebody else can give you more advice.
BTC
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
plz need help
while trying to update radio rom from sd card i bricked my hero
no powering up no charging led no connection to pc just like dead
need some help how much deep i amin s..t
Sorry about it but, its not "easy" to brick by flashing a new radio, unless wrong radio flashed or interrupted during flashing.
Some experts may be able to help if you put your question little more in detail...which radio etc.
update-hero-radio-63.18.55.06JU_6.35.08.29-signed
i was trying tp update this radio
hero-generic-2.73.405.38-rooted-signed firmware current FW
I had this problem as well what I did was contiously restart my phone take battery out put it back in. Done this like 20+ times then the phone managed to boot up.
Thanx but i already did that no use still dont know what s the problem
Htc hero bricked plez need help
i dunno whats wrong i was trying to update my radio rom minus nandroid backup
i flashed twice process stuck i pulled the battery now i have the dead phone no led no display no usb connection need help
Just checking but this sounds like you flashed a GSM radio onto a CDMA hero, is this what you have done? if so you are FOOOOOOBARRRRRRED son. and to be honest you really should have read about the radio flash.
If thats what it is,
if it isnt then good luck.
djmazhar said:
i dunno whats wrong i was trying to update my radio rom minus nandroid backup
i flashed twice process stuck i pulled the battery now i have the dead phone no led no display no usb connection need help
Click to expand...
Click to collapse
+ why do you think it got stuck? how long did you leave it?
List type of Hero you have, radio you were trying to flash aswell. Also will it boot into fastboot? (hold down vol down key and turn on)
Dan...
Thats what I asked in post 2.
i was trying to update radio rom 63.18.55.06JU_6.35.08.29
my SPL - 1.76.2007
rom -hero-generic-2.73.405.38-rooted-signed
and it does not boot into fast boot
Bricked htc hero some1 plz help!!!!
i have searched n searched online 4 2weeks for solutions but i have not found not 1 thing to help me,i accidentally flashed a gsm on my cdma & i cannot boot it @ aw,no led lights but yet it charges,i can only hold vol up & tap power & it juz vibrates 3x & i need some kinda of solution,anybody!please......
I have a rooted myTouch 3G and i flashed a radio and spl from this page:
-code.google.com/p/sapphire-port-dream/-
I know it says G1 but it came from this thread:
-forum.xda-developers.com/showthread.php?t=622613-
This was located under a Rom Bible for myTough 3G:
-forum.xda-developers.com/showthread.php?t=668090-
Back to the point. After i flashed the spl my phone's screen won't turn on. If i remove the battery and put it back in and press the power button and track ball the led turns blue. If i remove the battery and put it back in and plug in the charger the led turns orange but turns off if i press the power button. That's all that will happen. What can i do? Please Help!
try turning it on with home+power, or back+power, or vol-down+power
if you can get any of those to work you have the potential to save it
if none of those work, you now have a brick and there is probably nothing you can do.
None of those work. Am i screwed?
NONE of them work? I'm sorry to say this, but it's probably beyond hope now.
I'm not sure how the phone ended up like that, even if you did it in the wrong order (you are supposed to do the radio first) it still shouldn't have bricked a mytouch (it will brick a G1 tho).
Do you remember what rooting instructions you originally used? that might explain how this happened.
have a mytouch 3g 1.2 with the old radio and SPL, i acidently bricked it trying to flash the new radio and SPL and now i cant get into recovery or fastboot and the flash screen is frozen, pleassssssee help me get this fixed it has been completel useless for the last week or so
Hi there,
I have the following problem:
My cousin bought a brand new Magic 32B Vodafone.
I flashed it to latest CyanogenMod 6 for Magic.
The phone still has the Factory SPL + Radio on it,
i just put a custom recovery on it and flashed CM6.
I did the same with my Magic 32B, works fine since a year now.
It worked fine for about 2 weeks, with CM6 running stable and everything.
then suddenly after a reboot of the phone just went to black screen,
no vodafone splashscreen shows up or anything. It vibrates and then does nothing.
It doesn't show up at "fastboot devices" and "adb devices" shows no deveice either.
When i boot it up with volume down + power pressed (to get in fastboot) it doesnt vibrate (like when it works normally), but screen stays black.
I cant get in recovery either.
anyone ever had this problem? of course i googled for this problem but none of the "black screen" search results described my problem ..
is there a way to autoapply defaultrom (SAPPIMG.nhb) put on sd card (may have read something about that some time) or any other solution to this problem?
is this due to flashing the custom rom or maybe a broken device?
what are the chances to get it back from warranty?
i very much appreciate any help!
thanks
Sounds like the screen broke. If you install ANDROIDSDK you can probably grab screenshots to see what the phone is doing. That will allow you to flash the stock sappimg to get back stock and send in under warranty for repair.
Sent from my LG-P500 using Tapatalk
Does not work, phone doesn't respond to anything
ok, I'll just have to sent it to warranty then, and hope for the best
thanks anyway
did you ever fix this?