[Q] I can't install MAGDLR112. - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

I can't install MAGDLR. Everytime I try to install it, it freezes. It hangs at 0%. I tried the whole procedure 5 times, but still no luck.

bilaba70 said:
I can't install MAGDLR. Everytime I try to install it, it freezes. It hangs at 0%. I tried the whole procedure 5 times, but still no luck.
Click to expand...
Click to collapse
Why are you trying to install v1.12 when v1.13 is released?
try task29 your device and then try installing magldr again.

TheATHEiST said:
Why are you trying to install v1.12 when v1.13 is released?
try task29 your device and then try installing magldr again.
Click to expand...
Click to collapse
Because the tutorial that I'm following at the moment (to flash WP7) instructs me to install MAGDLR112. I've flashed WP7 before, but I forgot how to do it. It's probably an old tutorial.
What's the latest WP7-flashing tutorial?

Try right clicking the update utility and run as administrator while in bootloader works everytime
Sent from my HTC HD2 using XDA App

bilaba70 said:
Because the tutorial that I'm following at the moment (to flash WP7) instructs me to install MAGDLR112. I've flashed WP7 before, but I forgot how to do it. It's probably an old tutorial.
What's the latest WP7-flashing tutorial?
Click to expand...
Click to collapse
Why do you need a tut to install WP7??
All you do is put phone is..
Put phone into bootloader mode
Install magldr
Boot into magldr
USB Flasher
Flash WP7
Get the HD2 NAND Toolkit from teh sticky topic in Android NAND section, it has everything you need in one tool.

Related

[Solved] Problem flashing Android on HD2

Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
when you install magldr it wipes windows off the deivce, you are aware of that?
when you start the device with magldr you need to hold the power off button til you get the menu up then you can use the usb flasher if it is a daf installer or you need to install CWM recovery and install a rom that way
either way windows will no longer be on your device
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
matze91 said:
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
Click to expand...
Click to collapse
what version of android did you install? you need HSPL 2.08 or it will not work anways
if all you done was install magldr without install anything else it will do exactly as you have described because there is nothing for it to load up
I think you misunderstood me
Normally if magldr was installed correctly I should see a screen like this (http://www.xda-developers.com/wp-content/uploads/2011/02/MAGLDR-boot-menu.jpg), when I boot with hold power button+left arrow key.
But when I press this combination it does not boot to this screen. It just does nothing. And this is why I can´t proceed with any instruction, because I need a working magldr.
matze91 said:
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
Click to expand...
Click to collapse
I'm new to all this too so bare with me.
I think you may have installed the wrong HSPL. This is from the HSPL thread.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
When you installed HSPL you chose the wrong option. Someone more knowlegable will hopefully come along and tell you how to fix it.
After destroying and downgrading of HSPL with an original HTC Win Rom I could install a new HSPL again...
Don´t ask me how I´ve done this, but it worked
So thanks to all!

[Q] Htc HD2 wont reboot (Magldr and CLK)

After flashing HSPL 2.08, i installed magldr on my device. But when i install an Android or Clockworkmod Recovery, the installer repartitions the device. But after this step there stand "reboot" but it wont reboot. I must then pull off the battery and restart the phone. But ten the phone is stuck in Magldr or in Clk.
Plss heeelp me!
Thank youu
XxxXxx896 said:
After flashing HSPL 2.08, i installed magldr on my device. But when i install an Android or Clockworkmod Recovery, the installer repartitions the device. But after this step there stand "reboot" but it wont reboot. I must then pull off the battery and restart the phone. But ten the phone is stuck in Magldr or in Clk.
Plss heeelp me!
Thank youu
Click to expand...
Click to collapse
Well first clockwork mod recovery must be installed to install android in both clk and magldr ..
Sent from my Transformer TF101 using xda premium
kylew1212 said:
Well first clockwork mod recovery must be installed to install android in both clk and magldr ..
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Yes I did this, but it wont reboot, the device cant exit magldr. i must pull of the battery, but then it stuck on htc splash
i think u have the same issue as me ...i cant reboot too ...in magldr it stuck on 123456 go go go ...and in clk it gives an error ...but the probleme disapear on windows ...try to flash wm ...if it's ok than its soething with android and u cant do nothing about ...i tried everything ...and no solution ...
mootmetal said:
i think u have the same issue as me ...i cant reboot too ...in magldr it stuck on 123456 go go go ...and in clk it gives an error ...but the probleme disapear on windows ...try to flash wm ...if it's ok than its soething with android and u cant do nothing about ...i tried everything ...and no solution ...
Click to expand...
Click to collapse
another problem is that I cant flash back to WM. It is stuck at the HTC Logo.
I flashed with sd-card and bootloader and with the installer on the pc, but no way it wont boot and theres no R G D at the buttom of the screen when the htc logo appears. pls help me ...
Is it possible that my memory blocks are damaged ?? because clk says: "Error cannot read recovery Header" and then it is stuck .
What radio are you using?
Sent from my NexusHD2 using xda premium
have you tried the "task29" with hd2 toolkit?
Same problem over here Impossible to reinstall WM, because task29 stops installing at 96%
kylew1212 said:
What radio are you using?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Iam using Radio Leo 2.15.50.14
ericw13 said:
have you tried the "task29" with hd2 toolkit?
Click to expand...
Click to collapse
Yees very often... i used task 29 every time before i flashed a new rom.
When you are using "task29", you stay still stuck on 96%??
if so, I suggest you try another USB port on your pc.
otherwise, your menu "magldr", it is functional?
Already tried to put it in another USB Magldr is functional, but I don't know what to do with it.
ericw13 said:
When you are using "task29", you stay still stuck on 96%??
if so, I suggest you try another USB port on your pc.
otherwise, your menu "magldr", it is functional?
Click to expand...
Click to collapse
No at me task 29 isnt stuck. and yes magldr is functional. but i need recovery to flash rom. first i entered usb flasher and all works fine, but then there stands: "Resetting phone" But it wont reset i must pull off battery !
XxxXxx896 said:
No at me task 29 isnt stuck. and yes magldr is functional. but i need recovery to flash rom. first i entered usb flasher and all works fine, but then there stands: "Resetting phone" But it wont reset i must pull off battery !
Click to expand...
Click to collapse
are you sure to have applied the correct partition settings. false if the rom is stuck on a screen. what is the rom you want to flash?
ericw13 said:
are you sure to have applied the correct partition settings. false if the rom is stuck on a screen. what is the rom you want to flash?
Click to expand...
Click to collapse
So far no rom because i cant flash the clockworkmod. there it wont reboot
XxxXxx896 said:
So far no rom because i cant flash the clockworkmod. there it wont reboot
Click to expand...
Click to collapse
by flashing with hd2 toolkit, you have errors that appears in the application?
ericw13 said:
by flashing with hd2 toolkit, you have errors that appears in the application?
Click to expand...
Click to collapse
No all is fine there is no error... the phone dont want reset... and i tried mtty (cubexe said to me) and there stands that the phone has some bad blocks but no way to erase them or to mark them, i really tried all tipps i have read...
i think the nand memory (hardware) is totally damaged...
searching on the net, I came across this software YAFFS nand explore. it is apparently able to correct the problem of "bad block" on Android phone, a view!!
Sent from my NexusHD2 using XDA App
ericw13 said:
searching on the net, I came across this software YAFFS nand explore. it is apparently able to correct the problem of "bad block" on Android phone, a view!!
Sent from my NexusHD2 using XDA App
Click to expand...
Click to collapse
Thank you for your answer. but i cant use this because its a app and i cant boot into android.. there is no OS on my htc hd2. i cant install any OS the bad blocks are at the beginning, in the middle and at the end of the nand memory i think there is no system which is so small to boot into. a tool for pc which correct the bad blocks would be very usefull but i tried it already with mtty and i think its made for htc devices and this tool cant erase / repair /mark the blocks... i dont know if there i another tool which can repair this... but if you know some other tools for pc pls tell me ))

[Q] MAGLDR 1.13 stuck GO GO GO!

HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
hold power button until magldr menu appear
in ad recovery you can wipe anything
Pentuni said:
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
Click to expand...
Click to collapse
good to know u want to start from scratch...u ll never know wats been put it that device... ....here is wat you can do
i had put out these steps in another thread to help out a fellow XDAian... try
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
I tried to get task29 but my PC doesn't recognize the hd2 even on bootloader.
Sent from my MB860 using xda premium
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
It's better if you download the drivers because it's useful for later needs...
Best regards
Sam Razzy...
Sent from my HD2 using xda premium
Pentuni said:
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
Click to expand...
Click to collapse
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
I have the T Mobile US version, HSPL SPL-2.08.HSPL 8G XE COtullaHSPL 0x05 0x50(what it says on tricolor bootloader). The radio i tried to install is 2.15.50.14.
I got the drivers, my PC finally got a connection with the HD2 so i performed a task29 and wiped the phone then i followed your guide tried to install the radio but the process with CustomRUU.exe got stuck at 96% and said there was an error "this update utility can not be used on your device." and now the phone shows an Update Fail screen without a radio i cant install MAGLDr then install WP7 on it so what can i do?
kylew1212 said:
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Pentuni said:
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Click to expand...
Click to collapse
Okay sorry I should've explained more..
yes you have to have a radio.
Yes you can install ics beta 10 with clk.
No you cannot install wp7 with clk magldr is required for that.
If your phone is getting close to running out of battery I would flash clk 1.5 via SD card and then charge the phone up
Sent from my HD2 using xda premium
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
I'm having the same problem until today.
Did a task29, installed magldr, cwm, then a rom, radio is 2.15.50.14.
It can boot to CWM, it can reinstall the rom but it's gets stuck in the go go go after restarting.
Please help
TIA
I know how to use magldr, but not tons about it.. also I think you guys should post in the wp forums someone there may be better help
Sent from my HD2 using xda premium
Pentuni said:
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
Click to expand...
Click to collapse
Its happened to me before. Make sure as soon as you flash magldr, thats you clear mbr on sd card and use last 24 nand, and you will be fine, otherwise you will stay stuck on go go go go
good luck!
Yep.. thats a problem for you, but also for me, i have HTC HD2 fully working, just replaced digitzier soon, WinMo just works flawless thought it sucks ballls, and whenever i try to do task 29 then install radio then install magldr then install cwm with the required partition, i get stuck on GO GO GO! ..

Rom not booting, only magldr, need to get back to stock

Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
irteza_h said:
Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
Click to expand...
Click to collapse
Have you tried flashing a stock ROM from the SD card? The procedure is outlined here, it doesn't seem too hard. Since you can't connect in MAGLDR use an SD card reader to copy the stuff across.
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
clio94 said:
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
Click to expand...
Click to collapse
I tried to go to recovery AD ... It says that boot sources could not be found..
irteza_h said:
I tried to go to recovery AD ... It says that boot sources could not be found..
Click to expand...
Click to collapse
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Nigeldg said:
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Click to expand...
Click to collapse
I was trying to use the USB Flasher earlier and the installation would fail halfway through with various errors.. Tried with 4 different roms.. So decided to do a stock rom from sdcard .. tried a WWE and got an error 28002...couldnt get into magldr even now... Anyways got Task29 ..booted in the red yellow green screen and doing a wipe+hspl+magldr+recovery. As of now it stuck on 0% at the wipe process but it does say 10 minutes for flashing and its been only 2. Lets see.....
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
irteza_h said:
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
Click to expand...
Click to collapse
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Nigeldg said:
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
Click to expand...
Click to collapse
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
Daycrawler said:
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Click to expand...
Click to collapse
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
irteza_h said:
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
Click to expand...
Click to collapse
Yeah don't use the HD2 toolkit, go to the HSPL thread and download the HSPL4 package from there. Just select HSPL2.08 and flash it. The toolkit uses the older HSPL3 package if I'm not mistaken.

[Q] Error while booting to CLK recovery

Hello
I just flashed CLK on my hd2 using the toolkit, I also flashed the toolkit recovery (which i believe was v 4.3)
Now when I try to boot to recovery using Home + red buttons I get this error in the middle of the command lines
"ERROR: CANNOT READ RECOVERY_HEADER"
I tried to wipe all and reflash everything again but I keep getting the same error.
I looked everywhere but can't find any answer.
Is there any other way I can install a new ROM without accessing the CWM? like using the command prompt.
I also attached a screenshot of the error.
Any help would be very much appreciate it. and Please if there is a solution please show the steps for it cuz I am still new with CLK.
The latest stable version of clk is v1.5 which also installs a version of cwm , there is even one that installs twrp recovery too!
No links on my phone but will be easy to find...
BTW did you select clk install recovery option after clk reparation?
Sent from my NexusHD2 using xda premium
shanman-2 said:
The latest stable version of clk is v1.5 which also installs a version of cwm , there is even one that installs twrp recovery too!
No links on my phone but will be easy to find...
BTW did you select clk install recovery option after clk reparation?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I installed clk v1.5.1.1 just now but the phone freezed on "stick together" screen. any other way?
What does it say on the boot loader screen?
how did you Install? All steps you took?
Sent from my NexusHD2 using xda premium
shanman-2 said:
What does it say on the boot loader screen?
how did you Install? All steps you took?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I downloaded this file provided in clk thread "black_lk_20120920-TouchRec_b8" I installed it using the toolkit, I then added the LEOIMG file to the toolkit and flashed it.
And I can't get to the boot loader screen, I get the "stick together" screen once I turn on the phone, and then it freezes.
mjody said:
I downloaded this file provided in clk thread "black_lk_20120920-TouchRec_b8" I installed it using the toolkit, I then added the LEOIMG file to the toolkit and flashed it.
And I can't get to the boot loader screen, I get the "stick together" screen once I turn on the phone, and then it freezes.
Click to expand...
Click to collapse
Hold the volume down button and power on the device is not working ?????
Edit: what LEOIMG file???
shanman-2 said:
Hold the volume down button and power on the device is not working ?????
Edit: what LEOIMG file???
Click to expand...
Click to collapse
UPDATE! Ok I think I didn't install the right file earlier but I just downloaded the clk from here:
http://forum.xda-developers.com/showpost.php?p=21608340&postcount=848
it boots fine to the clk first screen. which I will add a picture of.
but It gives me this message when I select recovery. (Also a picture added)
ps: thank you very much for keeping up with me so fast.
mjody said:
UPDATE! Ok I think I didn't install the right file earlier but I just downloaded the clk from here:
http://forum.xda-developers.com/showpost.php?p=21608340&postcount=848
it boots fine to the clk first screen. which I will add a picture of.
but It gives me this message when I select recovery. (Also a picture added)
ps: thank you very much for keeping up with me so fast.
Click to expand...
Click to collapse
What version of hspl do you have installed?
If it's hspl 2.08 or hspl 3.03 try this,
first do a task29 using the toolkit
Then place the LEOIMG.nbh file on the root of your sdcard.
Now power on the device while holding the volume down button.
When asked to proceed with install push the power button..
This should install clk 1.5 with a default partition size which you can change from within clk later!
Let me know if it works.
shanman-2 said:
What version of hspl do you have installed?
If it's hspl 2.08 or hspl 3.03 try this,
first do a task29 using the toolkit
Then place the LEOIMG.nbh file on the root of your sdcard.
Now power on the device while holding the volume down button.
When asked to proceed with install push the power button..
This should install clk 1.5 with a default partition size which you can change from within clk later!
Let me know if it works.
Click to expand...
Click to collapse
I tried flashing it that way but it doesn't work with me, when I press volume down button with power it only shows the multicolored screen.
I also tried to restore the stock rom, by installing the rom from TMOUS website, my phone also freezes on the firs boot screen, "Stick Together"
by looking at this thread, http://forum.xda-developers.com/showthread.php?t=1063807
I think I got a hardware issue, RIP my hd2
mjody said:
I tried flashing it that way but it doesn't work with me, when I press volume down button with power it only shows the multicolored screen.
I also tried to restore the stock rom, by installing the rom from TMOUS website, my phone also freezes on the firs boot screen, "Stick Together"
by looking at this thread, http://forum.xda-developers.com/showthread.php?t=1063807
I think I got a hardware issue, RIP my hd2
Click to expand...
Click to collapse
Maybe so.
What way did you flash stock rom?
I don't understand why you cannot flash clk from the sdcard!
Have you tried a different sdcard??
What version of hspl do you have on that multicolored screen if you have anything?????
Edit:Hey, I hit the thanks by mistake but wtf, welcome to xda! :laugh:
shanman-2 said:
Maybe so.
What way did you flash stock rom?
I don't understand why you cannot flash clk from the sdcard!
Have you tried a different sdcard??
What version of hspl do you have on that multicolored screen if you have anything?????
Edit:Hey, I hit the thanks by mistake but wtf, welcome to xda! :laugh:
Click to expand...
Click to collapse
I did task29 then downloaded the rom file from t-mobile webisite then put phone on multicolored with usb debugging and ran the file on my computer.
I actually had this phone for almost 3 years now and I flashed about 4 different versions of android but i was using mgldr.
the phone was doing great with me but about 4 days I wanted to go to recovery to back up the phone I got "1E FATAL HIT 1"
I read that some one had the same issue and they switched to clk and it worked fine, and someone flashed stock rom then custom and it worked.
but nothing is working with me, I have 2.08 hspl and I've been using that for a long time, I tried 3 sdcards using both ways of flashing (toolkit and putting LEOIMG file in the sdcard) but it failed in all of them.
PS: thank you for the thank though I have been here since I got the phone and never got one thanks haha.
mjody said:
I did task29 then downloaded the rom file from t-mobile webisite then put phone on multicolored with usb debugging and ran the file on my computer.
I actually had this phone for almost 3 years now and I flashed about 4 different versions of android but i was using mgldr.
the phone was doing great with me but about 4 days I wanted to go to recovery to back up the phone I got "1E FATAL HIT 1"
I read that some one had the same issue and they switched to clk and it worked fine, and someone flashed stock rom then custom and it worked.
but nothing is working with me, I have 2.08 hspl and I've been using that for a long time, I tried 3 sdcards using both ways of flashing (toolkit and putting LEOIMG file in the sdcard) but it failed in all of them.
PS: thank you for the thank though I have been here since I got the phone and never got one thanks haha.
Click to expand...
Click to collapse
I don't understand why you cannot flash clk from the sdcard!
Click to expand...
Click to collapse
Now I do, I think!
I have asked you what it says on the multicolored screen a few times.
Pic please?
Flashing stock rom should do the trick as regards verifying that it's not a hardware problem, but it will have wiped your hspl!
So to install clk v1.5, you will have to re-flash hspl 2.08 (no zeros after the 8) or hspl 3.03!
shanman-2 said:
Now I do, I think!
I have asked you what it says on the multicolored screen a few times.
Pic please?
Flashing stock rom should do the trick as regards verifying that it's not a hardware problem, but it will have wiped your hspl!
So to install clk v1.5, you will have to re-flash hspl 2.08 (no zeros after the 8) or hspl 3.03!
Click to expand...
Click to collapse
Sorry for that, here is a picture of what you need. And this picture is while I have the stock rom installed on the phone now.
I tired to install clk 1.5 before flashing stock rom.
mjody said:
Sorry for that, here is a picture of what you need. And this picture is while I have the stock rom installed on the phone now.
I tired to install clk 1.5 before flashing stock rom.
Click to expand...
Click to collapse
OK, I would not give up yet.
Re-install hspl and this time select "3.03", then task 29 and try to reinstall clk 1.5...
Edit: If the last thing you did was install stock it won't work with hspl installed,
It should say something like..SPL-2.08.0000, use the hspl 3.03 package to downgrade to this spl version and then install stock from pc as normal (MAKE SURE you are using the correct stock rom for your phone) or as I said, try the above...
shanman-2 said:
OK, I would not give up yet.
Re-install hspl and this time select "3.03", then task 29 and try to reinstall clk 1.5...
Edit: If the last thing you did was install stock it won't work with hspl installed,
It should say something like..SPL-2.08.0000, use the hspl 3.03 package to downgrade to this spl version and then install stock from pc as normal (MAKE SURE you are using the correct stock rom for your phone) or as I said, try the above...
Click to expand...
Click to collapse
I am getting really frustrated now!
for clk:
I upgraded the hspl to 3.03, then installed clk 1.5. UNFORTUNATELY I am still getting the same message when I boot into recovery.
for stock rom: (I got it from t-mobile website which is the right one for my phone)
after failing to install clk, I FIRST downgraded the hspl to SPL 3.03.0000 and tried to flash the stock rom but the percentage bar doesn't even move. So I decided to try it with 2.08.0000 but the same thing happens. This doesn't happen when I have 3.03.HSPL or 2.08.HSPL, it actually loads when I have the hspl but then when it is done, I get stuck in "stick together" screen.
mjody said:
I am getting really frustrated now!
for clk:
I upgraded the hspl to 3.03, then installed clk 1.5. UNFORTUNATELY I am still getting the same message when I boot into recovery.
for stock rom: (I got it from t-mobile website which is the right one for my phone)
after failing to install clk, I FIRST downgraded the hspl to SPL 3.03.0000 and tried to flash the stock rom but the percentage bar doesn't even move. So I decided to try it with 2.08.0000 but the same thing happens. This doesn't happen when I have 3.03.HSPL or 2.08.HSPL, it actually loads when I have the hspl but then when it is done, I get stuck in "stick together" screen.
Click to expand...
Click to collapse
Have you tried this it's about the only option left...
I knew I had seen that thread before somewhere..
Maybe someone else has an idea, samsamuel might swing by but worth trying the above anyway...
best of luck
shanman-2 said:
Have you tried this it's about the only option left...
I knew I had seen that thread before somewhere..
Maybe someone else has an idea, samsamuel might swing by but worth trying the above anyway...
best of luck
Click to expand...
Click to collapse
It is not working! I took off the battery and back on and kept holding the restore button like 10 times.
Ugh I got a headache working on this for a week.
Thank you for your help man! and I hope someone can find out what the heck is wrong with my phone.

Categories

Resources