Hello
I just flashed CLK on my hd2 using the toolkit, I also flashed the toolkit recovery (which i believe was v 4.3)
Now when I try to boot to recovery using Home + red buttons I get this error in the middle of the command lines
"ERROR: CANNOT READ RECOVERY_HEADER"
I tried to wipe all and reflash everything again but I keep getting the same error.
I looked everywhere but can't find any answer.
Is there any other way I can install a new ROM without accessing the CWM? like using the command prompt.
I also attached a screenshot of the error.
Any help would be very much appreciate it. and Please if there is a solution please show the steps for it cuz I am still new with CLK.
The latest stable version of clk is v1.5 which also installs a version of cwm , there is even one that installs twrp recovery too!
No links on my phone but will be easy to find...
BTW did you select clk install recovery option after clk reparation?
Sent from my NexusHD2 using xda premium
shanman-2 said:
The latest stable version of clk is v1.5 which also installs a version of cwm , there is even one that installs twrp recovery too!
No links on my phone but will be easy to find...
BTW did you select clk install recovery option after clk reparation?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I installed clk v1.5.1.1 just now but the phone freezed on "stick together" screen. any other way?
What does it say on the boot loader screen?
how did you Install? All steps you took?
Sent from my NexusHD2 using xda premium
shanman-2 said:
What does it say on the boot loader screen?
how did you Install? All steps you took?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I downloaded this file provided in clk thread "black_lk_20120920-TouchRec_b8" I installed it using the toolkit, I then added the LEOIMG file to the toolkit and flashed it.
And I can't get to the boot loader screen, I get the "stick together" screen once I turn on the phone, and then it freezes.
mjody said:
I downloaded this file provided in clk thread "black_lk_20120920-TouchRec_b8" I installed it using the toolkit, I then added the LEOIMG file to the toolkit and flashed it.
And I can't get to the boot loader screen, I get the "stick together" screen once I turn on the phone, and then it freezes.
Click to expand...
Click to collapse
Hold the volume down button and power on the device is not working ?????
Edit: what LEOIMG file???
shanman-2 said:
Hold the volume down button and power on the device is not working ?????
Edit: what LEOIMG file???
Click to expand...
Click to collapse
UPDATE! Ok I think I didn't install the right file earlier but I just downloaded the clk from here:
http://forum.xda-developers.com/showpost.php?p=21608340&postcount=848
it boots fine to the clk first screen. which I will add a picture of.
but It gives me this message when I select recovery. (Also a picture added)
ps: thank you very much for keeping up with me so fast.
mjody said:
UPDATE! Ok I think I didn't install the right file earlier but I just downloaded the clk from here:
http://forum.xda-developers.com/showpost.php?p=21608340&postcount=848
it boots fine to the clk first screen. which I will add a picture of.
but It gives me this message when I select recovery. (Also a picture added)
ps: thank you very much for keeping up with me so fast.
Click to expand...
Click to collapse
What version of hspl do you have installed?
If it's hspl 2.08 or hspl 3.03 try this,
first do a task29 using the toolkit
Then place the LEOIMG.nbh file on the root of your sdcard.
Now power on the device while holding the volume down button.
When asked to proceed with install push the power button..
This should install clk 1.5 with a default partition size which you can change from within clk later!
Let me know if it works.
shanman-2 said:
What version of hspl do you have installed?
If it's hspl 2.08 or hspl 3.03 try this,
first do a task29 using the toolkit
Then place the LEOIMG.nbh file on the root of your sdcard.
Now power on the device while holding the volume down button.
When asked to proceed with install push the power button..
This should install clk 1.5 with a default partition size which you can change from within clk later!
Let me know if it works.
Click to expand...
Click to collapse
I tried flashing it that way but it doesn't work with me, when I press volume down button with power it only shows the multicolored screen.
I also tried to restore the stock rom, by installing the rom from TMOUS website, my phone also freezes on the firs boot screen, "Stick Together"
by looking at this thread, http://forum.xda-developers.com/showthread.php?t=1063807
I think I got a hardware issue, RIP my hd2
mjody said:
I tried flashing it that way but it doesn't work with me, when I press volume down button with power it only shows the multicolored screen.
I also tried to restore the stock rom, by installing the rom from TMOUS website, my phone also freezes on the firs boot screen, "Stick Together"
by looking at this thread, http://forum.xda-developers.com/showthread.php?t=1063807
I think I got a hardware issue, RIP my hd2
Click to expand...
Click to collapse
Maybe so.
What way did you flash stock rom?
I don't understand why you cannot flash clk from the sdcard!
Have you tried a different sdcard??
What version of hspl do you have on that multicolored screen if you have anything?????
Edit:Hey, I hit the thanks by mistake but wtf, welcome to xda! :laugh:
shanman-2 said:
Maybe so.
What way did you flash stock rom?
I don't understand why you cannot flash clk from the sdcard!
Have you tried a different sdcard??
What version of hspl do you have on that multicolored screen if you have anything?????
Edit:Hey, I hit the thanks by mistake but wtf, welcome to xda! :laugh:
Click to expand...
Click to collapse
I did task29 then downloaded the rom file from t-mobile webisite then put phone on multicolored with usb debugging and ran the file on my computer.
I actually had this phone for almost 3 years now and I flashed about 4 different versions of android but i was using mgldr.
the phone was doing great with me but about 4 days I wanted to go to recovery to back up the phone I got "1E FATAL HIT 1"
I read that some one had the same issue and they switched to clk and it worked fine, and someone flashed stock rom then custom and it worked.
but nothing is working with me, I have 2.08 hspl and I've been using that for a long time, I tried 3 sdcards using both ways of flashing (toolkit and putting LEOIMG file in the sdcard) but it failed in all of them.
PS: thank you for the thank though I have been here since I got the phone and never got one thanks haha.
mjody said:
I did task29 then downloaded the rom file from t-mobile webisite then put phone on multicolored with usb debugging and ran the file on my computer.
I actually had this phone for almost 3 years now and I flashed about 4 different versions of android but i was using mgldr.
the phone was doing great with me but about 4 days I wanted to go to recovery to back up the phone I got "1E FATAL HIT 1"
I read that some one had the same issue and they switched to clk and it worked fine, and someone flashed stock rom then custom and it worked.
but nothing is working with me, I have 2.08 hspl and I've been using that for a long time, I tried 3 sdcards using both ways of flashing (toolkit and putting LEOIMG file in the sdcard) but it failed in all of them.
PS: thank you for the thank though I have been here since I got the phone and never got one thanks haha.
Click to expand...
Click to collapse
I don't understand why you cannot flash clk from the sdcard!
Click to expand...
Click to collapse
Now I do, I think!
I have asked you what it says on the multicolored screen a few times.
Pic please?
Flashing stock rom should do the trick as regards verifying that it's not a hardware problem, but it will have wiped your hspl!
So to install clk v1.5, you will have to re-flash hspl 2.08 (no zeros after the 8) or hspl 3.03!
shanman-2 said:
Now I do, I think!
I have asked you what it says on the multicolored screen a few times.
Pic please?
Flashing stock rom should do the trick as regards verifying that it's not a hardware problem, but it will have wiped your hspl!
So to install clk v1.5, you will have to re-flash hspl 2.08 (no zeros after the 8) or hspl 3.03!
Click to expand...
Click to collapse
Sorry for that, here is a picture of what you need. And this picture is while I have the stock rom installed on the phone now.
I tired to install clk 1.5 before flashing stock rom.
mjody said:
Sorry for that, here is a picture of what you need. And this picture is while I have the stock rom installed on the phone now.
I tired to install clk 1.5 before flashing stock rom.
Click to expand...
Click to collapse
OK, I would not give up yet.
Re-install hspl and this time select "3.03", then task 29 and try to reinstall clk 1.5...
Edit: If the last thing you did was install stock it won't work with hspl installed,
It should say something like..SPL-2.08.0000, use the hspl 3.03 package to downgrade to this spl version and then install stock from pc as normal (MAKE SURE you are using the correct stock rom for your phone) or as I said, try the above...
shanman-2 said:
OK, I would not give up yet.
Re-install hspl and this time select "3.03", then task 29 and try to reinstall clk 1.5...
Edit: If the last thing you did was install stock it won't work with hspl installed,
It should say something like..SPL-2.08.0000, use the hspl 3.03 package to downgrade to this spl version and then install stock from pc as normal (MAKE SURE you are using the correct stock rom for your phone) or as I said, try the above...
Click to expand...
Click to collapse
I am getting really frustrated now!
for clk:
I upgraded the hspl to 3.03, then installed clk 1.5. UNFORTUNATELY I am still getting the same message when I boot into recovery.
for stock rom: (I got it from t-mobile website which is the right one for my phone)
after failing to install clk, I FIRST downgraded the hspl to SPL 3.03.0000 and tried to flash the stock rom but the percentage bar doesn't even move. So I decided to try it with 2.08.0000 but the same thing happens. This doesn't happen when I have 3.03.HSPL or 2.08.HSPL, it actually loads when I have the hspl but then when it is done, I get stuck in "stick together" screen.
mjody said:
I am getting really frustrated now!
for clk:
I upgraded the hspl to 3.03, then installed clk 1.5. UNFORTUNATELY I am still getting the same message when I boot into recovery.
for stock rom: (I got it from t-mobile website which is the right one for my phone)
after failing to install clk, I FIRST downgraded the hspl to SPL 3.03.0000 and tried to flash the stock rom but the percentage bar doesn't even move. So I decided to try it with 2.08.0000 but the same thing happens. This doesn't happen when I have 3.03.HSPL or 2.08.HSPL, it actually loads when I have the hspl but then when it is done, I get stuck in "stick together" screen.
Click to expand...
Click to collapse
Have you tried this it's about the only option left...
I knew I had seen that thread before somewhere..
Maybe someone else has an idea, samsamuel might swing by but worth trying the above anyway...
best of luck
shanman-2 said:
Have you tried this it's about the only option left...
I knew I had seen that thread before somewhere..
Maybe someone else has an idea, samsamuel might swing by but worth trying the above anyway...
best of luck
Click to expand...
Click to collapse
It is not working! I took off the battery and back on and kept holding the restore button like 10 times.
Ugh I got a headache working on this for a week.
Thank you for your help man! and I hope someone can find out what the heck is wrong with my phone.
Related
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
TommyHD2 said:
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
Click to expand...
Click to collapse
You need Hardspl from Cotulla. Search through the threads you'll find it. but if you had magldr installed you should have all the the necesary elements. using the tool kit you have to hold the volume down than power on. wait for your phone to say usb. Than proceed to task 29. Than when the screen shuts off hold the volume down again before the screen comes on. Pick your partition size, Than hit the partiton button wait for it to do its thing than hold the back key and some text should come on your phone ending with something like fastboot commands suspend. Flash the recovery. than when it go off again hold home until you get in to recovery. Hope that helps.
Cheers for the help. Ive got as far as the revovery install i had a load of text on the screen the last line of wich is 2690 --Portchange-- and the pc is sitting on waiting for device.
also this is all it does when i turn the phone on now
TommyHD2 said:
also this is all it does when i turn the phone on now
Click to expand...
Click to collapse
Are you holding the back button until the text comes on?
Have you successful installed hspl? Successfully installed magldr and successfully installed cwm?
Is the Rom your installing a magldr version? Did you get it from the Android nand thread?
Is your SD card working is it formatted to fat32?
Are you installing the Rom from SD?
Is it a .zip file?
Edit/ oh clk..... lol never used it
Sent from my HTC HD2 using XDA Premium App
If i hold the power with the back button or the power/hangup button the text goes up to --portchange-- line if i hold the home button it shoes the line
GET STALL_DESCRIPTOR 128 6 1536 0 10
Pc is still saying waiting for device.
I have magldr but cant seem to boot to it and i have SPL-2.08.HSPL CotullaHSPL
I also tried to install magldr again and it gives a USB init failed Info \\rspl\rspl..cpp (736) but the phone is showing USB with the red\green\blue\white screen.
whynot66 said:
Have you successful installed hspl? Successfully installed magldr and successfully installed cwm?
Is the Rom your installing a magldr version? Did you get it from the Android nand thread?
Is your SD card working is it formatted to fat32?
Are you installing the Rom from SD?
Is it a .zip file?
Edit/ oh clk..... lol never used it
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
haha..
TommyHD2 said:
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
Click to expand...
Click to collapse
alls ye really need mate if you have flashed spl 2.08 or above is get task29 plug phone via USB turn phone off turn back on while holding vol down key untill tri colours appear then it says USB at bottem, run task29 from computer phone will do the rest, get magldr go back to tri colour with USB at bottem run ROMUpdateUtility install it then try the rom in my signature first typhoon and download the recovery of his page and install that specific one then flash your rom, its got installation on typhoon thread....
Cheers for the help. Ive re-installed MAGLDR and have ClockworkMOD recovery v3.0.0.5 working and I have a rom that i have downloaded and am currently downloading one of yours Laney, before i do anything clockwork MOD is showing "Failed to find Cache partition to mount at \cache.
Dont you have an sd card inserted?
Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
irteza_h said:
Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
Click to expand...
Click to collapse
Have you tried flashing a stock ROM from the SD card? The procedure is outlined here, it doesn't seem too hard. Since you can't connect in MAGLDR use an SD card reader to copy the stuff across.
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
clio94 said:
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
Click to expand...
Click to collapse
I tried to go to recovery AD ... It says that boot sources could not be found..
irteza_h said:
I tried to go to recovery AD ... It says that boot sources could not be found..
Click to expand...
Click to collapse
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Nigeldg said:
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Click to expand...
Click to collapse
I was trying to use the USB Flasher earlier and the installation would fail halfway through with various errors.. Tried with 4 different roms.. So decided to do a stock rom from sdcard .. tried a WWE and got an error 28002...couldnt get into magldr even now... Anyways got Task29 ..booted in the red yellow green screen and doing a wipe+hspl+magldr+recovery. As of now it stuck on 0% at the wipe process but it does say 10 minutes for flashing and its been only 2. Lets see.....
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
irteza_h said:
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
Click to expand...
Click to collapse
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Nigeldg said:
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
Click to expand...
Click to collapse
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
Daycrawler said:
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Click to expand...
Click to collapse
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
irteza_h said:
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
Click to expand...
Click to collapse
Yeah don't use the HD2 toolkit, go to the HSPL thread and download the HSPL4 package from there. Just select HSPL2.08 and flash it. The toolkit uses the older HSPL3 package if I'm not mistaken.
Well, so here's my first post and this issue has been frustrating me because usually I find my answers online but anyways here's the problem. (Edit: Ok I realized I posted once before, so I guess 2nd my bad aha)
So, my HD2 had TyphooN CyanogenMod 7.2 RC2 v3.8.3 ROM on it cLK. One day my phone was always stuck on the T-mobile Stay together screen, I rebooted it over a good 20 times and still was always stuck. So I decided to just Task 29 it using the HD2 Toolkit (thanks ksubedi) (well I didn't know if that was a good idea or not because I'm not root smart aha, but I did it anyways) What I know when you Task 29 it, it wipes out everything, so I started the whole process again but with the HD2 Tookit. Everything was fine, running smoothing installing everything again, up until when I have to install ClockWorkMod on it. When I want to flash CWM its just always on the "waiting for device" on the command prompt and here iss the picture of my phone (provided)
Then I looked into more and I wasn't able to install the android_winusb.inf file because I have Windows 7 or something and I always get a failed error when trying to install it. (sorry yes I'm clueless aha) So I looked into it more and found the Android SDK thing and downloaded the Google USB driver. Still no luck when trying to install CWM.
But here is my downfall. I was so frustrated I was trying everything, so in the HD2 Toolkit I decided to install HSPL 2.08. My phone already had HSPL if I'm not mistaken if you already have the 3 color things when you press volume down and end call, (but again I'm clueless) So after that I Task 29, but here's the catch it will not do it. Before installing HSPL I could task 29 and it would take 15 seconds to go 100% but now its always 0, and gives me an error.
So that's my problem (probably more cause I screwed it up myself). But any help with be really appreciated!
Did you try manually installing the USB driver from the device manager?
As for the spl, are you sure you installed the 2.08.Hspl version (what does it exactly say on the RGB bootloader?)
Sent from my HD2 using xda premium
Τry to install clk v1.5.It has built in recovery and on the fly re-partition.So you`ll not need pc and usb drivers.
Will try when I come back after school. Finally some replies! I remember downloading HSPL 2.08.0000 or something. Does it exactly have to be 2.08?
vctkiller said:
Will try when I come back after school. Finally some replies! I remember downloading HSPL 2.08.0000 or something. Does it exactly have to be 2.08?
Click to expand...
Click to collapse
It must be 2.08.HSPL or 3.03.HSPL. the one ending in 0000 will block you from flashing unofficial images other than HSPL. So you can just flash back the hspl version again.
clio94 said:
Τry to install clk v1.5.It has built in recovery and on the fly re-partition.So you`ll not need pc and usb drivers.
Click to expand...
Click to collapse
Hey I tried this method, and also the one previously provided but still no luck. With the person saying get HSPL 2.08 I did it, got to the end where clk 1.4 or something (not clk 1.5) but the command line ends at porcharge. Theres no fastboot commands like in other pictures I look like and when I do cLK Install Recovery on the NAND Toolkit, the command prompt keeps waiting on the device.
So now I tried the cLK 1.5 method. I followed kylew1212's guide using the first way with the NAND Toolkit, Task 29, then did the INstall RUU. Everything went smoothly but I'm back to my first problem. It's stuck at the T-mobile stick together screen :/
If you press back button when phone restarts,doesnt get you in clk ? Or if you hold home when phone restarts,doesnt get you in recovery ?
clio94 said:
If you press back button when phone restarts,doesnt get you in clk ? Or if you hold home when phone restarts,doesnt get you in recovery ?
Click to expand...
Click to collapse
Sorry if I'm dumb lol. But the only way to turn on the phone is holding the red end key right, thats the only that it turns on for me. And its stuck at the stick together T-mobile logo. It doesn't go into recovery or anything. How would I be able to restart my phone with being on the T-mobile stick together screen without taking out the batteries and such??
Finally some success I'm on this screen now! Now to find a guide on how to work with cLK 1.5 aha.
Hmm. While restarting and pressing the back arrow and end key, I'm able to get into cLK. No like with home and end key though. And when I do click on Recovery it's trying to boot into Linux or something and no progress shows. "cmdline: no_console_suspend=1 wire.search_count=5 clk=1.5.0.0" Do I just have to wait longer or something. Also in the information on cLK 1.5 its just blank after Radio. Do I need a Radio of some sort?
Don't worry about that just boot into recovery and flash zip.
hengsheng120 said:
Don't worry about that just boot into recovery and flash zip.
Click to expand...
Click to collapse
Damn, I'm pretty clueless. But when I click recovery and get into the next screen nothing happens. How do I flash the zip if I'm unable to access the HD2 sd card with putting in the zip file.
Try to repartition the recovery sector to 10 mb in settings
hengsheng120 said:
Try to repartition the recovery sector to 10 mb in settings
Click to expand...
Click to collapse
Hmm. I tried with the original 5mb recovery sector and 10mb recovery sector still no success. I'm stuck with this screen when I click on recovery. I'm also curious if I should have a RADIO or something, because of the cLK 1.5 homescreen where it gives information its blank (pictures provided)
Are you able to sucessfully install magldr + recovery then?
hengsheng120 said:
Are you able to sucessfully install magldr + recovery then?
Click to expand...
Click to collapse
I've never installed magldr before, but I'll get back to you about it.
Well..problems with MAGLDR aswell. Everything goes smoothly until the USB Flashing and the AD Recovery. When doing USB Flashing the process is fine but when it goes "Reset now..." It never resets, but I'm guessing it flashed already. So when I go to AD Recovery it goes "1EFATAL HIT 1", I've looked up the problems for this, and so I've task 29 it again, installed 2.15.50.14 radio. Tried different cache size and partition size, but always no luck what so ever. So lost in this :/
vctkiller said:
Well..problems with MAGLDR aswell. Everything goes smoothly until the USB Flashing and the AD Recovery. When doing USB Flashing the process is fine but when it goes "Reset now..." It never resets, but I'm guessing it flashed already. So when I go to AD Recovery it goes "1EFATAL HIT 1", I've looked up the problems for this, and so I've task 29 it again, installed 2.15.50.14 radio. Tried different cache size and partition size, but always no luck what so ever. So lost in this :/
Click to expand...
Click to collapse
Try the fatality fix here: http://forum.xda-developers.com/showthread.php?t=1633243
I really appreciate that your helping me, but I'm almost there! Now encountered to another problem. Now when I do USB Flashing it finally resets itself. But when I click the AD Recovery its stuck at "GO GO GO!" I'm using the NAND Toolkit, and I tried two different partition and cache size 200/8 and 250/8. I have no idea how much I should bump these up too, and the ROM I'm trying to install is the NexusHD2, if that helps.
EDIT: FINALLY INTO CWM!!!! Hmm. I was looking around and there was this guy said to move the 3 pin connecters in the battery or something. So I was like what the heck and just did it, and now im in CWM. Thanks man. I really appreciate for you to always reply back when I needed help. Wouldn't have gotten through without you!
vctkiller said:
EDIT: FINALLY INTO CWM!!!! Hmm. I was looking around and there was this guy said to move the 3 pin connecters in the battery or something. So I was like what the heck and just did it, and now im in CWM. Thanks man. I really appreciate for you to always reply back when I needed help. Wouldn't have gotten through without you!
Click to expand...
Click to collapse
can u explain in detail how u make it working plz
faizul_emizal said:
can u explain in detail how u make it working plz
Click to expand...
Click to collapse
What problem are you having? I'm not expert like hengsheng120 but I was able to find a solution to a problem that I thought never was going to be fixed.
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Superdod said:
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Click to expand...
Click to collapse
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
shanman-2 said:
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
Click to expand...
Click to collapse
Thanks for the tip, but nothing happens while I am holding the buttons.
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
shanman-2 said:
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
Click to expand...
Click to collapse
Thanks, though I think I'll stay on windows for today x)
Try flash a different ROM and see if it works, if an alternative ROM works it could be a problem with the previous ROM or the settings you used within the phone e.g. might of missed a step or done something like partition sizes or something of that nature.
Superdod said:
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Click to expand...
Click to collapse
I'm not exactly sure what's going wrong, but something isn't installing correctly. Task 29 wipes your phone so you have nothing (aka the white screen you're talking about) try rebooting your computer and then go and install clk again. If everything works correctly it should work.
shanman-2 said:
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
Click to expand...
Click to collapse
This is true, but it won't work for him because he has no clk or recovery installed to boot into.
shanman-2 said:
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
Click to expand...
Click to collapse
+1
parker09 said:
Try flash a different ROM and see if it works, if an alternative ROM works it could be a problem with the previous ROM or the settings you used within the phone e.g. might of missed a step or done something like partition sizes or something of that nature.
Click to expand...
Click to collapse
No. To install a ROM, it requires a boot loader and recovery to be installed. Because he doesn't have either installed yet, this is not applicable.
Sent from my Galaxy Nexus using xda premium
Ah yeah, my mistake, was thinking green HTC logo
Hi Team
Just bought an old HD2 from work and am trying to flash to Android via the method described here - http://forum.xda-developers.com/showthread.php?t=1402975
I get as far as the repartition step 13, and when the phone reboots it does not load into CLK fastboot. All that happens is the white HTC screen comes up and doesn't go any further. At this point the phone is not detectable via ADB or normal USB.
The phone is a GSM HD2 and has HSPL 2.08 installed.
Any help recovering this or pushing forward with the flash is much appreciated.
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
shanman-2 said:
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
Click to expand...
Click to collapse
Yeah thats the problem - it goes through the CLK partition/recovery install, and the phone goes from the tricolour screen to the HTC 0-100% screen, reboots and then the white HTC logo screen. From the instructions, I thought the phone would go straight into CLK recovery.
Is there a set of key presses I'm meant to do to trigger recovery?
You have to hold "home" while booting to boot into recovery.
jianC said:
You have to hold "home" while booting to boot into recovery.
Click to expand...
Click to collapse
Thanks mate - will give this a crack when I get home
stuartgr said:
Thanks mate - will give this a crack when I get home
Click to expand...
Click to collapse
Yeah didn't work - still goes to the HTC logo...im guessing this means CLK didn't install properly.....Any other ideas?
Do you have install radio 2.15.50.14 ?
Sent from my NexusHD2 using Tapatalk
You have to give us more information.
What does it say when you hold down the volume button when starting the device ?
Same poblem
I have the exact same problem... The clk bootloader doesn't start up when i press the home button, after i've flashed it, but instead getting stuck on the HTC-white screen. I also have another HD2 where i can flash android(NAND) etc... without problems, so i can't really see why it doesn't work..
Right now i've been using:
- HTC HD2 EU-version
- Radio: have tried 2.14.50.02 and 2.15.50.14 without succes...
- SPL - 2.08
- HPSL 4
I'm using the HD2 toolkit when i'm trying to flash the phone.
Please help..
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
shanman-2 said:
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
Click to expand...
Click to collapse
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
shanman-2 said:
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
Click to expand...
Click to collapse
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
two2tee said:
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Click to expand...
Click to collapse
two2tee said:
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
Click to expand...
Click to collapse
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
shanman-2 said:
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
Click to expand...
Click to collapse
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
two2tee said:
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
Click to expand...
Click to collapse
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
shanman-2 said:
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
Click to expand...
Click to collapse
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
two2tee said:
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
Click to expand...
Click to collapse
Really don,t know what to say, looks like a jtag...
shanman-2 said:
Really don,t know what to say, looks like a jtag...
Click to expand...
Click to collapse
Hmm i could flash a custom win6.5 rom without problem...Could that help us on our way or?
EDIT: Just to be more precise, i've used "Artemis HD2 v70.0"
Link:
http://forum.xda-developers.com/showthread.php?t=612580
Well if you can do that it's not a jtag.
Probably be better to go back to stock if all else fails.
Sent from the pub...