Hello,
As i was updating my HD2 from WM 6.5 to WM7. I updated my Radio LEO 2.15.50.14 & After that i used MAGLDR113 but BOOTLOADER doesn't open. When i update my MAGLDR the welcome screens comes like
" o2 Welcome " and hangs on it. "
I even press the red button on the back which tries to open bootloader but the same screen comes and hangs there.
NEED HELP!
What should i do now? Urgent!
Thanks in Advance.
Now all my expectations are with you !
Thank you!
rockr129 said:
Hello,
As i was updating my HD2 from WM 6.5 to WM7. I updated my Radio LEO 2.15.50.14 & After that i used MAGLDR113 but BOOTLOADER doesn't open. When i update my MAGLDR the welcome screens comes like
" o2 Welcome " and hangs on it. "
I even press the red button on the back which tries to open bootloader but the same screen comes and hangs there.
NEED HELP!
What should i do now? Urgent!
Thanks in Advance.
Now all my expectations are with you !
Thank you!
Click to expand...
Click to collapse
turn off the phone, hold volume down while you power it on, you should be at a tri-color screen with your spl and radio info, this is your bootloader.
Once you access this, I would flash task29, then magldr113, then try your WP7 flash again.
I would first check the spl, my bet is you let hspl.exe offer you the wrong hspl.
Assuming you are coming from a stock o2 rom, that could only be 1.4x 1.6x or 3.03,, and magldr won't start without 2.08.hspl
samsamuel said:
I would first check the spl, my bet is you let hspl.exe offer you the wrong hspl.
Assuming you are coming from a stock o2 rom, that could only be 1.4x 1.6x or 3.03,, and magldr won't start without 2.08.hspl
Click to expand...
Click to collapse
Good call, I hadn't thought of the obvious first.
samsamuel said:
I would first check the spl, my bet is you let hspl.exe offer you the wrong hspl.
Assuming you are coming from a stock o2 rom, that could only be 1.4x 1.6x or 3.03,, and magldr won't start without 2.08.hspl
Click to expand...
Click to collapse
Ahhh Experience speaks!
well..
i was having spl 3.03 so i used hspl 4 and then magldr is not starting.. nice call but what should i do now? which magldr should i use? :O
@orangekid
thanks for the help but magldr is not being opened now what should i do ?
my phone is hanged now...
no use of phone! i need to install wm7
rockr129 said:
Ahhh Experience speaks!
well..
i was having spl 3.03 so i used hspl 4 and then magldr is not starting.. nice call but what should i do now? which magldr should i use? :O
@orangekid
thanks for the help but magldr is not being opened now what should i do ?
my phone is hanged now...
no use of phone! i need to install wm7
Click to expand...
Click to collapse
You have to rerun HSPL4 and choose HSPL 2.08
u sure about it man? i don't want to take risks at all lol
Yea,Hspl4,choose 2.08.hspl,and magldr should start.
Thanks a lot man! Thanks a lot! done! installed
rockr129 said:
Thanks a lot man! Thanks a lot! done! installed
Click to expand...
Click to collapse
Good job, have fun flashing
Hi
I am not able to boot MAGLDR on my HD2. I installed HSPL2.08 and then MAGLDR 1.13, but after installation MAGLDR menu doesn't appear. Phone sticks showing green HTC on white background. I am unable to load the MAGLDR with power key as well. What could be a problem? Any possible solution? Thank you very much.
Cheers
Darius
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Thanks, it did the trick
The best
samsamuel said:
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Click to expand...
Click to collapse
Thanks a lot dude:cyclops:
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse
Hello
I have a HTC HD2
I wanted to install android onto it.
And so installed HSPL 3.0.300000 from the package HSPL 4.0
After that the phone booted.
I powered it off and installed magldr 1.13
(I know MAgldr only works o HSPL 2.08 but i came to know that afterwards)
Now, I can't even get to the bootloader splash screen.
Pushing power button and volume down does not do anything.
Please help
Thanks.
Try hit reset button and hold the volume down.
and follow how to downgrade HSPL , in section "A1:Install HSPL3" of this GUIDE.
hope it's help.
thamlim said:
and follow how to downgrade HSPL , in section "A1:Install HSPL3" of this GUIDE.
Click to expand...
Click to collapse
but don't forget the warning (since the OP hasnt said what version hd2 he has) that following those instructions on a tmous will brick it....
pulz said:
Hello
I have a HTC HD2
I wanted to install android onto it.
And so installed HSPL 3.0.300000 from the package HSPL 4.0
After that the phone booted.
I powered it off and installed magldr 1.13
(I know MAgldr only works o HSPL 2.08 but i came to know that afterwards)
Now, I can't even get to the bootloader splash screen.
Pushing power button and volume down does not do anything.
Please help
Thanks.
Click to expand...
Click to collapse
try to flash another radio.
good luck
Hi Team
Just bought an old HD2 from work and am trying to flash to Android via the method described here - http://forum.xda-developers.com/showthread.php?t=1402975
I get as far as the repartition step 13, and when the phone reboots it does not load into CLK fastboot. All that happens is the white HTC screen comes up and doesn't go any further. At this point the phone is not detectable via ADB or normal USB.
The phone is a GSM HD2 and has HSPL 2.08 installed.
Any help recovering this or pushing forward with the flash is much appreciated.
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
shanman-2 said:
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
Click to expand...
Click to collapse
Yeah thats the problem - it goes through the CLK partition/recovery install, and the phone goes from the tricolour screen to the HTC 0-100% screen, reboots and then the white HTC logo screen. From the instructions, I thought the phone would go straight into CLK recovery.
Is there a set of key presses I'm meant to do to trigger recovery?
You have to hold "home" while booting to boot into recovery.
jianC said:
You have to hold "home" while booting to boot into recovery.
Click to expand...
Click to collapse
Thanks mate - will give this a crack when I get home
stuartgr said:
Thanks mate - will give this a crack when I get home
Click to expand...
Click to collapse
Yeah didn't work - still goes to the HTC logo...im guessing this means CLK didn't install properly.....Any other ideas?
Do you have install radio 2.15.50.14 ?
Sent from my NexusHD2 using Tapatalk
You have to give us more information.
What does it say when you hold down the volume button when starting the device ?
Same poblem
I have the exact same problem... The clk bootloader doesn't start up when i press the home button, after i've flashed it, but instead getting stuck on the HTC-white screen. I also have another HD2 where i can flash android(NAND) etc... without problems, so i can't really see why it doesn't work..
Right now i've been using:
- HTC HD2 EU-version
- Radio: have tried 2.14.50.02 and 2.15.50.14 without succes...
- SPL - 2.08
- HPSL 4
I'm using the HD2 toolkit when i'm trying to flash the phone.
Please help..
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
shanman-2 said:
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
Click to expand...
Click to collapse
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
shanman-2 said:
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
Click to expand...
Click to collapse
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
two2tee said:
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Click to expand...
Click to collapse
two2tee said:
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
Click to expand...
Click to collapse
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
shanman-2 said:
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
Click to expand...
Click to collapse
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
two2tee said:
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
Click to expand...
Click to collapse
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
shanman-2 said:
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
Click to expand...
Click to collapse
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
two2tee said:
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
Click to expand...
Click to collapse
Really don,t know what to say, looks like a jtag...
shanman-2 said:
Really don,t know what to say, looks like a jtag...
Click to expand...
Click to collapse
Hmm i could flash a custom win6.5 rom without problem...Could that help us on our way or?
EDIT: Just to be more precise, i've used "Artemis HD2 v70.0"
Link:
http://forum.xda-developers.com/showthread.php?t=612580
Well if you can do that it's not a jtag.
Probably be better to go back to stock if all else fails.
Sent from the pub...