Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
when you install magldr it wipes windows off the deivce, you are aware of that?
when you start the device with magldr you need to hold the power off button til you get the menu up then you can use the usb flasher if it is a daf installer or you need to install CWM recovery and install a rom that way
either way windows will no longer be on your device
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
matze91 said:
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
Click to expand...
Click to collapse
what version of android did you install? you need HSPL 2.08 or it will not work anways
if all you done was install magldr without install anything else it will do exactly as you have described because there is nothing for it to load up
I think you misunderstood me
Normally if magldr was installed correctly I should see a screen like this (http://www.xda-developers.com/wp-content/uploads/2011/02/MAGLDR-boot-menu.jpg), when I boot with hold power button+left arrow key.
But when I press this combination it does not boot to this screen. It just does nothing. And this is why I can´t proceed with any instruction, because I need a working magldr.
matze91 said:
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
Click to expand...
Click to collapse
I'm new to all this too so bare with me.
I think you may have installed the wrong HSPL. This is from the HSPL thread.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
When you installed HSPL you chose the wrong option. Someone more knowlegable will hopefully come along and tell you how to fix it.
After destroying and downgrading of HSPL with an original HTC Win Rom I could install a new HSPL again...
Don´t ask me how I´ve done this, but it worked
So thanks to all!
I have installed spl- 2.08.hspl. then installed maglder1.13 and it will only load into bootloader screen, and htc splash screen. will not load into magldr its an HD2 on at&t. please help
you hold down the power button to get into the magldr menu as per instructions
Won't start magldr unless radio is correct.
flashed correct radio at 12:45 am worked great thanks.
samsamuel said:
Won't start magldr unless radio is correct.
Click to expand...
Click to collapse
Thank you !!!!
I have again a problem... I installed MAGLDR 1.13 on my htc hd2, and it said that the installation went well... But when my phone restarted it just loaded the htc logo and stoped, I tried to reset my phone but it didn't help... So I need help asap, BIG thanks in advance!
"BIG problem" = noob error
you have the wrong hspl and/or radio.
magldr MUST have 2.08.hspl ONLY and any x.xx.50.x radio higher than 2.07.50.x
correct that, and magldr will start. No need to reflash magldr, its there, just waiting for you to get the spl and radio right.
How can i fix that? My rom got deleted... everything i can see is the htc logo and a white bg.
enter bootloader, connect usb cable, count to 5, flash.
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse
Hi Team
Just bought an old HD2 from work and am trying to flash to Android via the method described here - http://forum.xda-developers.com/showthread.php?t=1402975
I get as far as the repartition step 13, and when the phone reboots it does not load into CLK fastboot. All that happens is the white HTC screen comes up and doesn't go any further. At this point the phone is not detectable via ADB or normal USB.
The phone is a GSM HD2 and has HSPL 2.08 installed.
Any help recovering this or pushing forward with the flash is much appreciated.
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
shanman-2 said:
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
Click to expand...
Click to collapse
Yeah thats the problem - it goes through the CLK partition/recovery install, and the phone goes from the tricolour screen to the HTC 0-100% screen, reboots and then the white HTC logo screen. From the instructions, I thought the phone would go straight into CLK recovery.
Is there a set of key presses I'm meant to do to trigger recovery?
You have to hold "home" while booting to boot into recovery.
jianC said:
You have to hold "home" while booting to boot into recovery.
Click to expand...
Click to collapse
Thanks mate - will give this a crack when I get home
stuartgr said:
Thanks mate - will give this a crack when I get home
Click to expand...
Click to collapse
Yeah didn't work - still goes to the HTC logo...im guessing this means CLK didn't install properly.....Any other ideas?
Do you have install radio 2.15.50.14 ?
Sent from my NexusHD2 using Tapatalk
You have to give us more information.
What does it say when you hold down the volume button when starting the device ?
Same poblem
I have the exact same problem... The clk bootloader doesn't start up when i press the home button, after i've flashed it, but instead getting stuck on the HTC-white screen. I also have another HD2 where i can flash android(NAND) etc... without problems, so i can't really see why it doesn't work..
Right now i've been using:
- HTC HD2 EU-version
- Radio: have tried 2.14.50.02 and 2.15.50.14 without succes...
- SPL - 2.08
- HPSL 4
I'm using the HD2 toolkit when i'm trying to flash the phone.
Please help..
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
shanman-2 said:
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
Click to expand...
Click to collapse
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
shanman-2 said:
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
Click to expand...
Click to collapse
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
two2tee said:
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Click to expand...
Click to collapse
two2tee said:
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
Click to expand...
Click to collapse
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
shanman-2 said:
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
Click to expand...
Click to collapse
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
two2tee said:
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
Click to expand...
Click to collapse
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
shanman-2 said:
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
Click to expand...
Click to collapse
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
two2tee said:
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
Click to expand...
Click to collapse
Really don,t know what to say, looks like a jtag...
shanman-2 said:
Really don,t know what to say, looks like a jtag...
Click to expand...
Click to collapse
Hmm i could flash a custom win6.5 rom without problem...Could that help us on our way or?
EDIT: Just to be more precise, i've used "Artemis HD2 v70.0"
Link:
http://forum.xda-developers.com/showthread.php?t=612580
Well if you can do that it's not a jtag.
Probably be better to go back to stock if all else fails.
Sent from the pub...