I have again a problem... I installed MAGLDR 1.13 on my htc hd2, and it said that the installation went well... But when my phone restarted it just loaded the htc logo and stoped, I tried to reset my phone but it didn't help... So I need help asap, BIG thanks in advance!
"BIG problem" = noob error
you have the wrong hspl and/or radio.
magldr MUST have 2.08.hspl ONLY and any x.xx.50.x radio higher than 2.07.50.x
correct that, and magldr will start. No need to reflash magldr, its there, just waiting for you to get the spl and radio right.
How can i fix that? My rom got deleted... everything i can see is the htc logo and a white bg.
enter bootloader, connect usb cable, count to 5, flash.
Related
Hi there! I have a problem after install MAGLDR :/ I connected my HD2 to computer with ActiveSync, runned ROMUpdateUtility from computer, on my phone there was a tricolour screen, then self-reset and phone is freezing on white HTC LOGO. I tried to turn off my phone, remove battery... I'm also turning my phone on with press vol down + power - I have 3 colour screen and now what? PLEASE HELP!
Connect your HD2 to your laptop/pc... boot it while pressing volume down.. wait untill it says usb in the bottom of your screen. Now you can flash HSPL 2.08 and flash a custom or original rom.
I had the same.. gonna stick with RAM roms untill this is nand stuff is sorted out
I have the same problem... but after reflash HSPL 2.08 there will be no change. Could not start the machine.
How can flash rom from pc without booting the machine?
I couldn't understand "Now you can flash HSPL 2.08 and flash a custom or original rom." the second step ...
solved!
I had the same problem.
The issue it's the radio.
install 2.15.50.14
http://www.multiupload.com/QP0IWGY42F
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
sexyseamus said:
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
Click to expand...
Click to collapse
Download a compatible radio (eg 2.15.50 in post above), boot to bootloader (switch off, vol down + power on (keep holding vol down until it boots), connect to pc and when usb shows on screen run the CustomRUU.exe in the radio download. (if there isn't one included you can take any one from a custom wm rom). You flash the radio the same way that you flash a rom.
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
sexyseamus said:
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
Click to expand...
Click to collapse
Are you sure you have HSPL installed properly. In bootloader mode, check the spl version - it should show as 2.08.hspl, not 2.08.0000 or any other hspl version.
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
sexyseamus said:
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
Click to expand...
Click to collapse
I had your problem and for some reason when I first ran hspl the first time and put 2.08 on my phone it said it worked but it didn't actually do anything.
Just reinstall 2.08 HSPL on your phone and then run MAGLDR.
Similar Scenario
I installed 2.08.HSPL - confirm at boot loader screen
I installed MAGLDR 1.13 with success
Flashed HD2_Core_Droid_Desire_HD_V1.5_NAND_ONLY_LEO1024_TMOUS to my phone with success
Phone worked fine for about a day and a half and froze up
Pulled battery and restarted to white screen
I can't seem to roll back the SPL, reinstall the MAGLDR, or install a different radio.
ROM Update Utility appears to start to work and phone restarts and I get an error message that the image is corrupt.
Any ideas?
I read this thread http://forum.xda-developers.com/showthread.php?t=893620
about how to install android 2.2 on HD2, but I can not get MAGLDR 1.13 installed first. I downloaded the package and ran ROMUpdateUtility.exe, it says updating ROM verion 3.14.831.3 to 2.00.000.0, I proceed with next, then the phone went to 4-colour screen mode, shows SPL version is 3.03. Later on, it goes to black screen with only HTC logo the 0% progress bar on. Few minutes later, the installation on my computer said error[262], update error.
I wasn't sure if I need to downgrade the SPL to 2.08, as people said in this thread http://forum.xda-developers.com/showthread.php?t=829954 it does not matter.
My HD2 has the lastest rom listed on HTC - HongKong English support site.
Please advise what I need to do to get MAGLDR installed?
Thank you.
That thread is from before MAGLDR even existed. You need 2.08.HSPL to flash MAGLDR.
You can get all the info you need here .
Skellyyy said:
That thread is from before MAGLDR even existed. You need 2.08.HSPL to flash MAGLDR.
You can get all the info you need here .
Click to expand...
Click to collapse
Thanks for your reply.
I just got the HSPL4 and installed the 2.08.000, not 2.08 SPL on my HD2.
But when I tried to install the MAGLDR 1.13 again, it did the same thing again, it goes to black screen with only HTC logo the 0% progress bar on. Few minutes later, the installation on my computer said error[262], update error.
Any idea?
It seems I need to install 2.08 SPL, not 2.08.000 in HSPL4.
It works fine now.
u need 2.08HSPL and a 576mb ram radio..
Hi
I am not able to boot MAGLDR on my HD2. I installed HSPL2.08 and then MAGLDR 1.13, but after installation MAGLDR menu doesn't appear. Phone sticks showing green HTC on white background. I am unable to load the MAGLDR with power key as well. What could be a problem? Any possible solution? Thank you very much.
Cheers
Darius
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Thanks, it did the trick
The best
samsamuel said:
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Click to expand...
Click to collapse
Thanks a lot dude:cyclops:
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse
Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.
What version hspl n magldr?
Sent from my LG-P999 using XDA App
and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx
Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14
SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,
the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx
Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.