Hi !
I recently bought a HTC HD2 from a friend and I wanted to get rid of Winmo and install Android on this phone.
I started by flashing HARDSPL 2.08 on my phone using HSPL4 and it worked because when I go into the bootloader (The tri-color screen ?) I can see "SPL-2.08.HSPL" and "CotullaHSPL".
Then I performed a Task29 using the HTC HD2 Toolkit, I reboot my phone to the tri-color screen and then I tried to install MAGLDR.
And here is the problem, I cannot enter into MAGLDR ! On every video I have seen, people just power on their phone and after the HTC screen they get the MAGLDR menu, my phone just get stuck on the HTC Screen !
I don't know understand the problem, maybe I missed a step (I'm a noob ...), so if you can help, I'd be very thankful !
Haez
task29 erased the phone memory.
You should re-install HSPL 2.08, the correct Radio ROM, and then MAGLDR.
Thank you for your quick reply !
I'll try as you said and start at the beginning with re-installing HSPL 2.08, but what do you mean with "the correct Radio ROM" ?
[EDIT] I searched, and I found [/EDIT]
Thank you again !
Haez
[EDIT2] It worked ! I am in MAGLDR, thank you tictac0566 ! [/EDIT2]
Haez said:
Thank you for your quick reply !
I'll try as you said and start at the beginning with re-installing HSPL 2.08, but what do you mean with "the correct Radio ROM" ?
[EDIT] I searched, and I found [/EDIT]
Thank you again !
Haez
[EDIT2] It worked ! I am in MAGLDR, thank you tictac0566 ! [/EDIT2]
Click to expand...
Click to collapse
I´m glad it worked... sorry for my short answer, sometimes I tend to forget mentioning things which are "too normal" for myself.
Hi ,
first sorry for my bad english cuz its not my native language
but i will do my best to explain what happened !
first of all i wanted to put windows phone 7 for my HTC HD2
and it worked i did it ,
but for a reason i wanted to turn back to wm 6.5 so i opened task29 tool
then HSPL2 ,
after that i couldn't do anything
i opened the ROMUpdateUtility but the loading stop on 0%
i tried to open any tool and all of them stop on 0%
so what can i do ?
my phone is stuck in a sort of logo screen :S
this the the logo that im stuck with
and i hope this pic can help
<< click on it to get a the picture in the original size
have you pulled the battery? If you haven't, do that to reboot the phone. While the phone is booting during the white t-mobile screen, hold vol down until you get to the color bar screen, then plug in your USB and run the WM6.5 stock ROM off the T-mobile website (www.t-mobile.com/wmupgrade)
I think your problem is that you should have installed HSPL 2.08 instead of SPL 2.08. In my opinion custom ROMs won't work with SPL.
Please use HSPL3 or HSPL4 Software to modify.
BL72 said:
I think your problem is that you should have installed HSPL 2.08 instead of SPL 2.08. In my opinion custom ROMs won't work with SPL.
Please use HSPL3 or HSPL4 Software to modify.
Click to expand...
Click to collapse
OMG you r right ,
it really worked
thank u very very much
Hi
I am not able to boot MAGLDR on my HD2. I installed HSPL2.08 and then MAGLDR 1.13, but after installation MAGLDR menu doesn't appear. Phone sticks showing green HTC on white background. I am unable to load the MAGLDR with power key as well. What could be a problem? Any possible solution? Thank you very much.
Cheers
Darius
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Thanks, it did the trick
The best
samsamuel said:
Flash correct radio. No need to re flash magldr, its there, waiting for you to get the spl and radio right. Once they are it will boot.
Click to expand...
Click to collapse
Thanks a lot dude:cyclops:
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse
Hello,
I got a htc hd2.
Unfortunately, this only starts to HTC logo.
've Already tried to flash again.:
with hspl : SPL-3.03.hspl,then Task 29. RadioRom 2.15 and the Artemis Rom uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
I then return to the spl-3.03.000
and Stockrom RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship via usb (before, of course task29) uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
Soft reset and hard reset did nothing.
It always starts only until htc logo.
In the bootloader with:
PB81100 SS-BC
SPL 3.03.0000 XE
MicroP (LED) 0x05
MicroP (Touch) 0x50
Someone nee idea what I can try to?
Thanks in advance
HD2 not bricked
See this thread, you may have to downgrade your SPL to 2.10
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=893948
Many thanks to mskip
David
ernie0124 said:
Hello,
I got a htc hd2.
Unfortunately, this only starts to HTC logo.
've Already tried to flash again.:
with hspl : SPL-3.03.hspl,then Task 29. RadioRom 2.15 and the Artemis Rom uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
I then return to the spl-3.03.000
and Stockrom RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship via usb (before, of course task29) uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
Soft reset and hard reset did nothing.
It always starts only until htc logo.
In the bootloader with:
PB81100 SS-BC
SPL 3.03.0000 XE
MicroP (LED) 0x05
MicroP (Touch) 0x50
Someone nee idea what I can try to?
Thanks in advance
Click to expand...
Click to collapse
IMO it's not bricked (afaik it wouldn't start at all if bricked), but something on your MB is faulty.
Best401k said:
See this thread, you may have to downgrade your SPL to 2.10
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=893948
Many thanks to mskip
David
Click to expand...
Click to collapse
that only applies to flashing Android, I think he's just trying to boot WM6.5
bib*oops said:
IMO it's not bricked (afaik it wouldn't start at all if bricked), but something on your MB is faulty.
Click to expand...
Click to collapse
Sounds like your mainboard might be overheating. The ROM you are using sounds correct. Try putting the phone in the freezer for 5 minutes, then turn it on and see if it loads WM6.5 before freezing / restarting again, this would show that your mainboard is faulty.
hi and thanks for your help,
so now I have with MTTY task28, task 29, task 2a and info 8th performed.Since he has given bad blocks.
Then I uploaded the original ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship via sdcard.
Had the phone for 20 minutes, then placed in the refrigerator and then started. again the same problem.
Nand is my broken maybe?
ernie0124 said:
hi and thanks for your help,
so now I have with MTTY task28, task 29, task 2a and info 8th performed.Since he has given bad blocks.
Then I uploaded the original ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship via sdcard.
Had the phone for 20 minutes, then placed in the refrigerator and then started. again the same problem.
Nand is my broken maybe?
Click to expand...
Click to collapse
Might be.
You are 100% sure that is the correct stock ROM?
According to HTC and imeinr. it is a t-mobile cell phone.
He has made the installation of the Roman sdcard without fail.
orangekid said:
Might be.
You are 100% sure that is the correct stock ROM?
Click to expand...
Click to collapse
He always remains the logo
ernie0124 said:
According to HTC and imeinr. it is a t-mobile cell phone.
He has made the installation of the Roman sdcard without fail.
Click to expand...
Click to collapse
T-Mobile in which country?
germany
orangekid said:
T-Mobile in which country?
Click to expand...
Click to collapse
That is so weird. I guess it's possible you have so many bad blocks that your nand is just not usable.
How about if you just run HSPL from the bootloader and flash a custom ROM or flash MAGLDR instead?
I had HSPL 3.03 and 2:08 also tried with a custom rom
Starts only until htc logo.
I had, after I had tried the stockrom via sdcard on it it with HSPL 2:08 task 29, Radio_rom_2_15_50_14
CLK_1_5_HBOOT flashed. Flashing worked without problems.
But the start is just a white screen.
Otherwise I would have just installed Android on SD card.
Can one save what?
orangekid said:
That is so weird. I guess it's possible you have so many bad blocks that your nand is just not usable.
How about if you just run HSPL from the bootloader and flash a custom ROM or flash MAGLDR instead?
Click to expand...
Click to collapse
So let's start over.
You flash HSPL, then task29, then MAGLDR, and just reboot the phone, and it does not boot into magldr?
yes exactly
it only goes to the logo
orangekid said:
So let's start over.
You flash HSPL, then task29, then MAGLDR, and just reboot the phone, and it does not boot into magldr?
Click to expand...
Click to collapse
ernie0124 said:
yes exactly
it only goes to the logo
Click to expand...
Click to collapse
This doesn't make sense.
From HSPL, you flash task29 and it flashes successfully?
Then you go back into HSPL, and flash magldr, and that flashes successfully?
Then you reboot the phone, and it won't make it past the HTC logo?
yes i flashed from HSPL task 29 and it flashed successfully.
Then i go back in to HSPL and flash magldr successfully.
Then i reboot the phone and it starts magldr.
When you start the message is short (Nand kernel open failed)
and it starts in the menu
Then comes the next problem.
I have tried to set up the system environment with the ClockworkMod (to match the rom)
he seems to do well.
Resets but not by itself.
I've just made by hand.
Then I wanted to partition the sd card inserted.
So I went to AD Recovery menu.
There is then another error:
Android Load Raw
(K) 11808000:29 A650 (I) 12800000:136 A22 ......
Load Done
1EFATAL HIT 1
orangekid said:
This doesn't make sense.
From HSPL, you flash task29 and it flashes successfully?
Then you go back into HSPL, and flash magldr, and that flashes successfully?
Then you reboot the phone, and it won't make it past the HTC logo?
Click to expand...
Click to collapse
ernie0124 said:
yes i flashed from HSPL task 29 and it flashed successfully.
Then i go back in to HSPL and flash magldr successfully.
Then i reboot the phone and it starts magldr.
When you start the message is short (Nand kernel open failed)
and it starts in the menu
Click to expand...
Click to collapse
So the magldr menu never comes up?
in the magldr menu every time I come.
(Nand kernel open failed) is that an error message?
orangekid said:
So the magldr menu never comes up?
Click to expand...
Click to collapse
ernie0124 said:
in the magldr menu every time I come.
(Nand kernel open failed) is that an error message?
Click to expand...
Click to collapse
That sounds like a CWM error, not one you'd get just from entering the magldr menu.
As soon as it loads magldr, is there any menu with any choices?
Like flash magldr 1.13 and then does a menu ever come up?
Also, are you flashing HSPL 3.03 or 2.08? You should have 2.08
orangekid said:
That sounds like a CWM error, not one you'd get just from entering the magldr menu.
As soon as it loads magldr, is there any menu with any choices?
Like flash magldr 1.13 and then does a menu ever come up?
Also, are you flashing HSPL 3.03 or 2.08? You should have 2.08
Click to expand...
Click to collapse
"NAND kernel open failed" appears when you try to "Boot AD NAND" from magldr without having a ROM installed.
MAGLDR's menu does show up, because that error is from selecting option #2 (or #1, I don't remember).
He needs now to flash a recovery using "5. USB Flasher", then flash a ROM using that recovery.