Hello guys,
I was flashing a lot of different roms and next morning I tried pluging my usb in and a error came up saying its not recognised and I have installed kies but what do i do with it im actualy stuck :/ also when I charge my phone from dead and go to my music player it says low battery but its charging though I think heres proably a file missing in my system but when I flash a rom still the same problem occours
Can some one help me I will be forever gratefull ?????
On what rom you are now?
Try to flash a stock ROM with 3 files plus PIT file ( pda, modem, csc and pit file) from samfirmware.com . This way I solved many of my problems ( partition/battery status/ imei problems) after flashing different custom ROM's.
Related
I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.
Hi,
Im a new desperate polaris user with a big problem of flashing.
I was flashing with the new rom phampang and a bug as come at 36%.
Since this moment, the phone still in the 3 color page, with spl 220 olinex. thats all. whan i try to flash anything (radio, rom, spl...) i always find a 260 error.
I try many different method but nothing as worked.
I tryed many many roms, and I flash many times without any problem. I dont anderstand.
when I plug the phone an pc, i get a message of error with the usb device (with vista). Same thing with my other pc xp pro.
please I need your help, I have to find a solution this week end, cant work without my polaris.
thank you !
nooms
polaris (bricked ?)
Can this thread help you?
http://forum.xda-developers.com/showthread.php?t=403883
Must wonder why people has all this problem? I have flashed roms for many years and never hade any problem?
thank you but no:
the mtty method doesnt work: tells that "usb port cant open" !
nooms
If you have hard-spl on your device, maybe you should try to flash with micros sd method.
http://forum.xda-developers.com/showthread.php?t=384084&highlight=guide
hello all
i have i-mate jasjam its proplem is no gsm
i tried alot for flashing the radio bymany verions but it stoped and when i tried t flashing it by many roms and also the original rom it stoped on the step gsm
and if i flahed it by any rom wihout the radio it completes but with no gsm
i hope to find a resolve to this prop plz to make my phone alife again
thx for u all
This is maybe problem with hardware ! better to you go in service,bcs if you flashed with original rom and radio,he must to work 100%
thz alot for help but i need a solution do it by myself thx
Hi, can you please write down what is on the bootloader screen ?
hi aze2learn thx for trying help me
ok
on the boot loader screen
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
thx alot aze2learn
Well, since you already have hardspl 2.10-Olipro, please make sure you flash WM6 (green welcome screen) or above because WM5 (blue welcome screen) for sure will make the device show 'No GSM' if it writes an old radio version. Try original rom for your device here first : http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
It is recommended to use radio version (GSM) from your carrier. You can also try other radio (if you want to) from here : http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms . Some say 1.47.30.10 is the best in terms of power consumption but maybe not suitable for others (depends on carrier/geography)
Note : Only original ROMs from HTC/carrier have radio. Cooked roms don't include radio.
All the best
ps : Only HardSPLed device will allow flashing extracted radio rom. Stock SPL will stop the device from flashing.
ok man thx alot i will try and i will tell u but tell me how to flashing it by pc or by sd
thx
Try RUU first (flashing through pc using usb cable) but if you're having problem such as error 260 (no connection), you can use sdcard method since you already HardSPL your device
ps: sdcard method only works on FAT32 filesystem and non-SDHC microsd.
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
mony_nana said:
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi,
Extract RUU_inside.exe (use winrar or 7zip) RUU_inside.exe is in the original HTC ROM package ... get the RUU_signed.nbh and put into a new folder.
Then use RUUWrapper from here : http://forum.xda-developers.com/showthread.php?t=298737 and put it in the same folder with RUU_signed.nbh
Boot the device in bootloader mode. In RUUWrapper, tick 2.10 (new bootloader) and is it Hard-SPL. Follow the instruction.
All the best
ps : please check your PM
hi man
its stoped again on 11%
my mind will be pumped and i dont know what to do
i do everything i think
i will be crazy
maybe your battery drained out already? if so, try turn off the phone, charge it for 30 mins and try again.
ps: have you read your PM?
its already full charged
Please don't worry too much. Since your device already HardSPL, your device can still be revive.
i hope it will be aliveagain but how?
i am too tired from searching on the internet about this prop
and i didnt get any resolve for it
i think u have mor experiance than me and u can search more deeper than me
i will be here tmorrow maybe u can find a selution
i am from egypt and u ?
I'm from Malaysia (GMT+8) and please read your private message. I would really love to help but I need extra info such as what OS are you using, what happen before you got into trouble,etc.
hello ,
yesterday i tried to flash my omnia II for the first time , and it seems that it will be the last one
i made every single step as it should be , i was upgrading to the original version I8000NXXJB3 ... my pc operating system is win xp ..
but after starting it stucks while downloading img to ram ... and i tried to reflash it but it used to stuck on different values every time like 41% , 39 % , 75 % ... and it reached once 99% and then stopped .
now for sure when i turn it on it shows the ( download mode ) screen but nothing else , and i couldnt format it using buttons method as it has no operating system of course .....
any help please ? and is there another method to flash the rom ( as to use the sd card ) ?
Are you using octans and the correct drivers for flashing? try downloading a different rom!! for example.. maybe you´re trying with jd5 try with jh2!! or maybe.. try flashing 1 thing!! Start with eboot, then csc, then pda, and maybe if you wanna try the phone!! sometime i have the same problem.. the solution was veeery simple!!! Don´t worry!!
.... $$$
na wnoooooo .....
I currently have a MIUI android ROM installed but want to go back to WinMo 6.5 (stock). Now when i try to flash the ROM like i did before, its says on my PC USB Init failed, connection problem. The bootloader screen does say usb. Also when I try to flash trough the MAGLDR flash modus there is USB standing but i cant flash. I've also tried flashing the stock ROM from my SD card as an NBH file but it wont work.. Also repartitioning and all the stuff dont work because they all have te connection problem. I have tried multiple USB cables. Anyone know a solution??