hello all
i have i-mate jasjam its proplem is no gsm
i tried alot for flashing the radio bymany verions but it stoped and when i tried t flashing it by many roms and also the original rom it stoped on the step gsm
and if i flahed it by any rom wihout the radio it completes but with no gsm
i hope to find a resolve to this prop plz to make my phone alife again
thx for u all
This is maybe problem with hardware ! better to you go in service,bcs if you flashed with original rom and radio,he must to work 100%
thz alot for help but i need a solution do it by myself thx
Hi, can you please write down what is on the bootloader screen ?
hi aze2learn thx for trying help me
ok
on the boot loader screen
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
thx alot aze2learn
Well, since you already have hardspl 2.10-Olipro, please make sure you flash WM6 (green welcome screen) or above because WM5 (blue welcome screen) for sure will make the device show 'No GSM' if it writes an old radio version. Try original rom for your device here first : http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
It is recommended to use radio version (GSM) from your carrier. You can also try other radio (if you want to) from here : http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms . Some say 1.47.30.10 is the best in terms of power consumption but maybe not suitable for others (depends on carrier/geography)
Note : Only original ROMs from HTC/carrier have radio. Cooked roms don't include radio.
All the best
ps : Only HardSPLed device will allow flashing extracted radio rom. Stock SPL will stop the device from flashing.
ok man thx alot i will try and i will tell u but tell me how to flashing it by pc or by sd
thx
Try RUU first (flashing through pc using usb cable) but if you're having problem such as error 260 (no connection), you can use sdcard method since you already HardSPL your device
ps: sdcard method only works on FAT32 filesystem and non-SDHC microsd.
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
mony_nana said:
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi,
Extract RUU_inside.exe (use winrar or 7zip) RUU_inside.exe is in the original HTC ROM package ... get the RUU_signed.nbh and put into a new folder.
Then use RUUWrapper from here : http://forum.xda-developers.com/showthread.php?t=298737 and put it in the same folder with RUU_signed.nbh
Boot the device in bootloader mode. In RUUWrapper, tick 2.10 (new bootloader) and is it Hard-SPL. Follow the instruction.
All the best
ps : please check your PM
hi man
its stoped again on 11%
my mind will be pumped and i dont know what to do
i do everything i think
i will be crazy
maybe your battery drained out already? if so, try turn off the phone, charge it for 30 mins and try again.
ps: have you read your PM?
its already full charged
Please don't worry too much. Since your device already HardSPL, your device can still be revive.
i hope it will be aliveagain but how?
i am too tired from searching on the internet about this prop
and i didnt get any resolve for it
i think u have mor experiance than me and u can search more deeper than me
i will be here tmorrow maybe u can find a selution
i am from egypt and u ?
I'm from Malaysia (GMT+8) and please read your private message. I would really love to help but I need extra info such as what OS are you using, what happen before you got into trouble,etc.
Related
hello all,
i'm a newscommer on this forum,i've trust in upgrade my phone with aku3
i correctly followed the topic , install step 1 (forG3) and step 2
my device worked fine after the first install (qteck 2.15 fr ->2.2 from step1)
i've synchronize my phone, and run the second part, installing without problems, reboot > freeze on the boot screen htc
no way to synchronize again. my phone is reconized by mtty (1.51 and 1.50) but i don't know how to use it
ipl 2.09
spl 2.20.0000
gsm 02.47.21
os 3.0.0.0
i've tried all the night to find a solution on all forum i knew, i drive me to this one, i think it could help me best ( you'r pro dudes )
but i'm allways stick. i've call htc division hotline (i'm from france) , they said i have to send back my phone ( but he's now out of waranty, cause it's not a legal rom i've installed, so i have to paid, and i've allready too much invest on my device)
plz said me there is still a hope!
did try upload another rom from bootloader ?
did try upload another rom from bootloader ?
but first try a hard-reset
i don't know how to load a rom from bootloader (i allready have made soft and hard reset
no one could help me ?
1. dowenload this latest Qtek official rom from here: ftp://xda:[email protected]_220734_2207114_024721_QtekWWE_Ship.exe
2. enter your S200 into bootloader mode by pressing power +camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the S200 to your pc (make sure your battery is fully charged)
4. run the Qtek official rom.
5. good luck!
i've tried those kind of upgrade several time, but without possibility of establishing an active sync connexion, it's impossible to launch the rom install...
does samebody knew if it's possible to make a rom dump with an emulator and copy it on a sd card for autoinstall backup in bootloader mode ?
while in bootloader you don't need to establish any activesync connection. just plug the usb cable, then if appears "usb" on phone you are good to go.
install the original DOPOD rom from the ftp.
this rom don't work, it give me the message
error 294 invalid vendor id
it's now working ! great !
i've juste install again the step one of jester's aku3.3 (so, i'm on a 2.20 os, i think i'll keep it for a while )
thank you verry much
pti_nourson said:
it's now working ! great !
i've juste install again the step one of jester's aku3.3 (so, i'm on a 2.20 os, i think i'll keep it for a while )
thank you verry much
Click to expand...
Click to collapse
So you can now change your signature again, right
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
Hi all,
I encounter some problems with the polaris. When I want to use the camera I encounter the message:" unable to initialize....".
I also encounter problems with the FM radio: when I want to use my radio, it starts up, you see the screen, but no sound radio stations can be found. This means no radio functionality as well.
I've perfomed soft reboots but also hard reboots (so it initializes completely again). I also tried new ROMs. Nothing helps. Anybody recognizes this problem? Looks like that it has problems initializing the radio/ camera function.
Is there an update available which could fix this problem? My device is not damaged at all. Or would there be an other solution, as far as you know? Furthermore, the phone works perfectly. Hopefully you can help me with this.
Thanks!!!
Greetz,
M
First flash ur pda with :
http://www.4shared.com/file/46948092/9e97bc37/Radio_Murata_1582123.html
or
http://www.4shared.com/file/54732373/c9f753c5/Radio_Murata_1582514.html
If that doesnt work.Keep the one murata radio on your pda and flash another win mobile rom(without radio rom).
I prefer khanx vanilla v6 (radio isnt working, http://forum.xda-developers.com/showthread.php?t=398796 ) or swtos roms (http://forum.xda-developers.com/showthread.php?t=404977 )
look also:http://forum.xda-developers.com/showthread.php?t=414436
Other radio roms are crap....
2 ALL. My FM radio very very poor, allways noice & appear and disappear signal, in same moment - mobile phone samsung about 200$ give 100% better quality
any suggest ?maybe need forget to use radio in cruise ???
Hi Badguy,
Yesterday I tried to flash my pda, as you said, with the radio rom "http://www.4shared.com/file/46948092...a_1582123.html". the update ended up in 99% completeness. So now....I have the tri color error (so I cannot use my phone). Hopefully I will be able to restore it again.
You have any tips?
Michel
hi.
Yes i forgot to tell you, that u have to flash HARD SPL first, then u can flash any custom rom and any radio rom.
Now, u have to flash ur pda with original touch cruise rom, which will restore your pda to normal working mode.Original rom is on CD, which was in box, when u bought ur phone.When the iriginal rom is flashed, u do the hard spl, then u can flash any software made for polaris.
Hi,
Thanks for the info...I am not aware that I received any CD's with original roms.
If I have not received any CD with Rom on it, can I not just update the ROM with ,for example, Diamond r7 Rom?
I tried this, but I didn't succeed. Normally I connect the phone to my pc, then enter the 'bootloader mode (from hard SPL)' on my pda by starting up the bootloader on my polaris and then I run the new ROM from my computer. When I use this procedure, the ROM is updated. I used this procedure as well for this 'flash'.
Since I have now the permanent tri-color, and therefore cannot enter bootloader, how can I update my ROM to the original version (or to any other ROM)?
Any further tips?
Thanks!
Michel
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
badguy999 said:
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
Click to expand...
Click to collapse
Hi,
I have tried the above steps. I have downloaded the rom, upacked it and renamed into POLAIMG.nbh
I pressed the camera button all the time and performed a soft reset with stylus. The following happens:
1. The three color comes again (it says: POLA100, SPL-1.25.0000, CPLD-2; in the red part; also in the above right corner of the red part it says: RUUNBH).
2. Then it turns into a white screen with: 'Loading...'.
3. After that it says...'checking...'
4. After this it says:
"0025002
not allow"
Then it returns again to the three color with same text as above.
Do you know any tips to solve my problem? Hopefully you can help me!
Kind regards,
M
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
mewsijben said:
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
Click to expand...
Click to collapse
Hi,
I know that I need to install Hard SPL and I have read the threads you mentioned (before). The thing is, how can I install Hard SPL without the use of any active sync. In other words: how can I install Hard SPL by using the SD-card?
If you can help me with this...it would be great.
Michel
bkeaver said:
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
Click to expand...
Click to collapse
U cant. First u have to flash original rom to make the pda working again. Then u can install hardspl through cable. original rom can be flashed with microsd method.
Are u sure that u have memory card in fat32??Cause error u described few post before.
Hi,
When I want to flash it with original rom (rename the rom to POLAIMG.nbh, it starts loading, than checking, and than it says 'not allow....and a number' See also a few posts back. I formatted the SD to FAT 32
Somehow I'm not allowed to install the original rom. Therefore I thought that I needed to install Hard SPL.
Or should I press a combination of buttons on my phone? When I press the camera button and then soft reset, the same happens, when I just reset (he tries to load the image, but does not work).
I'm now allmost through all my options here. Hopefully somebody can help.
Greetz,
michel
camera problems
Hi,
as far as i understand the "cannot initialize" camera problem is a know HTC hardware problem and the only solution to it is to send the phone to HTC for board replacement.
(it might suddenly start working for some time - i saw reports that it happens , but than the problem will probably return -- there are lot of touch cruise users i saw with this problem and the only known solution i saw was HTC repair)
Is true that the polaris is "weak" phone. mine had trouble with connecting to 3G. And during calls, persons didnt hear me well and from time to time i was muted . So, they change motherboard.
Polaris has really weak signal strenght. Far far better signal i got from tytn2 and trinity.With regular radio rom...
If anyone find a time to help me , about HTC artemis is only stuck on windows mobile screen/logo
..also phone was entering on bootloader mode , three color screen ?
3.15.0000 version T-mobile , but cant fllashing , cant uspl nothing only going to 3% and stopping there.
Any help on this please?
best.r
Hellooooo...
Masters , how to solve this problem , pleasee???????
Radio ROM curropted,
First of all
Try restoring factory settings.
1) PUSH AND HOLD the (-) and (-) buttons over the (ok) and (windows) buttons, then press and hold RESET button.
2) Release reset button. but keep (-) and (-) held.
3) A message will appear and tells you to press SEND to restore factory defaults, SEND = GREEN TEL BUTTON.
4) Press it and wait, see what will happen after, maybe once it's finished you will need a soft reset, I don't remember...
Second Try possibility -if the above will not work-
Try with flashing a new full official ROM
it might be a problem as probably you do not have USPL unlocked!
so your SPL should still be looked to 3,13 or similar.
it would give you a DEVICE ERROR if you update it, and stop at 3%.
if SPL is 1.11 so that's fine, SPL is unlocked.
just enter bootloader and flash any complete (OS + RADIO) Rom, even non factory rom.
if SPL is locked you can save your tel just trying to update and original factory rom.
example: T-Mobile UK, T-Mobile Germany, T-Mobile ....
Note that even if they are all T-Mobile they are different! (Germany is different than UK, and so...)
Desperate last choise
If all the above did not solve,
probably your Radio ROM is curropted and in a bad sector,
use MTTY tool and comands to do a low level format, and remove any residual rom tack.
Do not clean bootloader, you will need it for the new re-flash
Then enter bootloader and flash an official factory rom.
It took me 6,30 hours to save my last Artemis, wish you a quicker solution, so good luck!
mouse.co.nr , thanks for reply mate.
First i have try since from yesterday to give on the phone any fllash , i have try so much diference way to get solution but nothing happen.
The phone cant do a hard reset by presing buttons , the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000 , and i know that the phone was not cid unlock maybe , but i cant give any upsl and fllashing with fllash that phone.
Second i we try with ART_TMOUK_11311001_024990_WWE_Ship_R3 t=mobile UK , nothing happen , also only radio ARTEIMG_TMO_UK_4.1.13.251_02.92.90_RadioOnly , again nothing.
Radio only , and fllash was going to 3% and stopping.
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
..and also i have try to fllash from sd card http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
root folder
haveri said:
..and also i have try to fllash from sd card , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
Best.r
Click to expand...
Click to collapse
...probably a problem is creating a folder with the name root, "root folder" means on your sd-card without any folders... as far as i know...
anyway, good luck trying
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem! if it gives you the "windows mobile image" and stops there, so it's just the radio, else it's the OS and probably the radio!
do a full ROM updt, official WWE have both radio and OS.
I wish for you that your PPC doesn't stop at Windows Mobile Image (the one after boot image), I have thrown away a P3600 in this way!!! Radio was so curropted that I could not fix it anyway, nither MTTY, required a CIP programming, but I'm not good at...
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
It surprised me the first time I got a 270, try the attached uspl, I got that from the rapidshare, scanned with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked (now it speaks french!).
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem!
do a full ROM updt, official WWE have both radio and OS.
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
try the attached uspl, I got that from the rapidshare, tested with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked.
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
no bootloader possible
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
hds09 said:
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
Click to expand...
Click to collapse
Hi!
Check hardware buttons,maybe one of them is broken,that's why you can't put your device in bootloader.
Make a Goldcard (search) and flash the Kaiser with Goldcard inside.It will revive your device.
BR
Scootie
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken