Hello,
I've been googling around for a workaround but I cannot seem to find one that actually works. The problem is, when I try to connect my phone to the PC and, for example, want to flash it with an official rom - it simply cannot find it. It can find the SD card when I mount it.
When I put it in, Windows attempts to install a few drivers but fails at the ADB. According to several sites, I can just use the one from HTC Sync or from the Android SDK. It installs fine but it still doesn't seem to be able to contact my phone. I cannot sync it either.
Anyone got an idea? I seem to be on my last nerve.
I dont have any problems here. What windows beta release do you use?
Final version. Released today. It's Windows 7 Professional.
First, set the phone to debugg mode...
Ok here we go (at least it works for me)...
1.- Remove the drivers actuaslly installed (it might get tricky, as I don't know exactly how to remove the registry keys)
2.- Once you have cleaned windows from the drivers, connect the phone to the computer and let it recognize everything (Probably it would not recognize the ADB drviers, so far we are good)
3.- After the drivers are installed, go and check in control panel/Devices Administration (or something like that... I have Windows in spanish so I don't know exactly how is called on english... By the way, sorry if my english sound a little bit weird =P..)
4.- Here you should see probably a device as "not recognized" or what ever is called... Here is the part where you need to select the driver manually.
5.- Check the phone driver folder (you should have it, if you don't get them)
6.- When you see the different options, select the one called HTC Dream Composite ADB Interface
7.- You are done =D...
I hope I made it clear enough for you...
If you have any doubt, add me to MSN xnofrostx - hotmail.com (I don't put the @ because I hate spam xD so you should add only the xnofrostx =P...
Hope you can get it to work...
I couldn't, for the life of me, get it to work so I put Windows XP on a vmware and flashed it through there. Works wonders.
Sorry for not being able to help.
I run Windows 7 Evaluation copy. I have had no problems. In fact there was nothing for me to set up, it just saw it on first attempt.
trillex said:
Hello,
I've been googling around for a workaround but I cannot seem to find one that actually works. The problem is, when I try to connect my phone to the PC and, for example, want to flash it with an official rom - it simply cannot find it. It can find the SD card when I mount it.
When I put it in, Windows attempts to install a few drivers but fails at the ADB. According to several sites, I can just use the one from HTC Sync or from the Android SDK. It installs fine but it still doesn't seem to be able to contact my phone. I cannot sync it either.
Anyone got an idea? I seem to be on my last nerve.
Click to expand...
Click to collapse
I'm on Windows 7 Ultimate. Driver from AndroidSDK and HTC Sync works perfectly for me. I can access everything except cannot sync with HTC Sync.
Rogers Magic
Rooted
CyanogenMod 4.1.9999
I cannot sync either, when installing the sync program it gives an error but continues installation, then my phone says it cannot detect htc sync on my computer, but im gonna try this link http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
trillex said:
I couldn't, for the life of me, get it to work so I put Windows XP on a vmware and flashed it through there. Works wonders.
Click to expand...
Click to collapse
I'm glad you decided to upgrade back to XP!
IE_DSM said:
I'm glad you decided to upgrade back to XP!
Click to expand...
Click to collapse
LOL, Windows 7 is a damn nice release and a lot faster than both xp and vista compared to the hardware available at the moment off release.
i am also using windows 7 beta and final
no issues at all. and i also think, that win7 is really good piece of software. far superious to win xp
Hi all,
It's been a while, but I am back with HD2. I have a problem. I have win7 business on all off my computers, I instaled latest activesync, but I keep getting error connection. When installing drivers, I get the unknown device, so instalation failed.
Not even bluetooth recognition works.
Any suggestions, please?
vid200 said:
Hi all,
It's been a while, but I am back with HD2. I have a problem. I have win7 business on all off my computers, I instaled latest activesync, but I keep getting error connection. When installing drivers, I get the unknown device, so instalation failed.
Not even bluetooth recognition works.
Any suggestions, please?
Click to expand...
Click to collapse
If you are using Windows 7 Business, I would guess you mean you are using Windows Mobile Device Center, yes? In Windows Device Manager are you set up to automatically download drivers? Are you getting any errors in the Sync Center? There is a lot of information you have to supply before anyone can troubleshoot the problem you are having.
There are a lot of steps you can take, most of which you can find by doing a search of XDA. If that fails, then come back with a more detailed explanation of what you have done, and people will try to help troubleshoot for you.
Thanks for looking,
and yes I have been searching a lot for information allready before I made a new thread.
I have win7 business and yes it does download drivers automaticly.
I will try and search for manual driver setup, but would be very thankful if any of you could give me some hints.
vid200 said:
Thanks for looking,
and yes I have been searching a lot for information allready before I made a new thread.
I have win7 business and yes it does download drivers automaticly.
I will try and search for manual driver setup, but would be very thankful if any of you could give me some hints.
Click to expand...
Click to collapse
In Device Manager you can click on Portable Devices and see if you see your HD2 there, if you do, then right click on it. You can find options to manually install drivers. If that does not work, in the Mobile Device Center you can configure how the center is supposed to connect to your HD2. Have you tried that yet? Also, make sure you are not using a USB hub for connections. You can try changing USB ports to try to reinstall drivers.
I am trying hard, this is the error I get:
P.S.: in activesync all options are on, so no problems there, but I have tried all of them.
In that case, try uninstalling the device in Device Manager, and starting over again. It does seem to be a driver problem. Another trick you can try is on the HD2, under Settings, USB to PC, try unticking Enable advanced network functionality, and then try to reinstall the drivers.
Another thing you can try is deleting the partnership in Windows Mobile Device Center and creating a new partnership.
Is there a wa I could find the driver somewhere and install it myself?
Not beeing able to find the right one...
vid200 said:
Not beeing able to find the right one...
Click to expand...
Click to collapse
In the Leo ROM forum the thread on MTTY has some Windows 7 drivers you can download I believe, but that will take awhile.
Are you using Win7 32 or 64 bit?
win7 32 bit. I tried to download them through windows update, but I got an error as well.
So I am on a quest for drivers....
vid200 said:
win7 32 bit. I tried to download them through windows update, but I got an error as well.
So I am on a quest for drivers....
Click to expand...
Click to collapse
If you are familiar with computers, you can try this with Win7 drivers you download for HD2.
You did try uninstalling your device in Device Manager, and trying another USB port to install it on? It seems really odd that Win7 is not finding the right drivers for you, and that persists even after you uninstall and reinstall the device.
No luck so far, any more ideas?
Update:
I tried the same thing on another laptop, same specs, same win7 business, worked like a charm.
So must be this win7 problem I think. Any ideas what to do? I can't remove mobile device center, so I could try and reinstall it. The icons stay in my control panel.
Anybody?
I just can't imagine this is only happening to me.
vid200 said:
Anybody?
I just can't imagine this is only happening to me.
Click to expand...
Click to collapse
Did you have any luck yet in solving the problem?
Nope my dear helper,
I found out this is windows7 problem. I still get the first error can't install device driver, because the device is not installed on the computer.
Something must be wrong, but I was getting a head, network driver installed fine, windows mobile device program runs fine, I made a clean install with register delete etc...
I just can' seem to find this to work.
i had some problem the first time i plugged my HD2 on win7 64 ultim.
nothing happened, no activesync, no nothing...
i opened sync center, nothing...
windows updates found me windows mobile device center with upgrade devices, the thing installed but all still worked bad, impossible to activesync, no driver for my HD2, and i know nothing about phones and windows, it's my first windows mobile.
so after hours of fighting, i decided to DL the app windows mobile device center on microsoft download website, then i installed the thing and oh miracle, my HD2 was detected, the app Win M D Center was asking me now with the pic of my hd2 in the prog to chose between settings as the first thing installed by windows update always froze at win mob device center splash screen...
i resume here but it took me the all afternoon to finally resolve this problem.
something went wrong with windows update install and to reinstall the all app was the easy way to fix the activesync problem.
If you did already re-download Windows Mobile Device Center and that did not work on the one recalcitrant computer, maybe you might need to update your BIOS or download the latest drivers for you motherboard. Sometimes problems can crop up if the computer does not have the most updated BIOS and motherboard drivers. How old is the computer you are using?
Well, after calling microsoft support and HTC support and doing for 36 hours nothing but trying I finally reinstalled my hole system. So new clean install of windows 7 business and it works like acharm. Where did it went wrong, I don't know, there had to be some register issue I think. Windows mobile center worked ok, the connection with the phone worked, but just not recognizing the device. Well I would of done the instalation sooner, If I knew this one is gonna be so hard to do.
vid200 said:
Well, after calling microsoft support and HTC support and doing for 36 hours nothing but trying I finally reinstalled my hole system. So new clean install of windows 7 business and it works like acharm. Where did it went wrong, I don't know, there had to be some register issue I think. Windows mobile center worked ok, the connection with the phone worked, but just not recognizing the device. Well I would of done the instalation sooner, If I knew this one is gonna be so hard to do.
Click to expand...
Click to collapse
Well, glad you finally solved your problem, and that this time the blame was not just placed on HTC or the Leo. Sad though that you had to go through so much to get the darn thing to work. I just installed a new operating system for my neighbor, and there is still more work to do on it. Not a fun thing to do.
so ive tried everything from every write up and tutorial.
I just cant seem to push anything to my phone with windows deployer or tom xap and xapdeploy. the closest i got was with xapdeploy. it actually seemed to connect then gave me an 800xxxx error number.
i spent hours and hours installing all the giant windows programs that they told me to. nothing worked. i just have less space on my computer.
I can connect with zune and sync and put music on just fine. but all the deployers just tell me they cant connect.
and when i opened the chevron app it said relock instead of unlock so i clicked it and i think im done for good. i pretty sure the rom i used is already unlocked.
i might try to reinstall wp7 and try again or just go back to android.
any suggestions?
the only thing i can think of is that i dl'd and installed .net framework4 before i realized that it was in my windows updates. then i did my widows updates after. im running vista 32bit by the way.
myphonesbetter said:
so ive tried everything from every write up and tutorial.
I just cant seem to push anything to my phone with windows deployer or tom xap and xapdeploy. the closest i got was with xapdeploy. it actually seemed to connect then gave me an 800xxxx error number.
i spent hours and hours installing all the giant windows programs that they told me to. nothing worked. i just have less space on my computer.
I can connect with zune and sync and put music on just fine. but all the deployers just tell me they cant connect.
and when i opened the chevron app it said relock instead of unlock so i clicked it and i think im done for good. i pretty sure the rom i used is already unlocked.
i might try to reinstall wp7 and try again or just go back to android.
any suggestions?
the only thing i can think of is that i dl'd and installed .net framework4 before i realized that it was in my windows updates. then i did my widows updates after. im running vista 32bit by the way.
Click to expand...
Click to collapse
So you can sync it, are you synced as a guest or have you setup your device?
I dont think guest works, although im not sure as i have always setup my device rather thanusing a guest.
secondly, dont click on relock, it will re lock it, it should say relock, not unlock. if it says unlock the you need to unlock it
finally, did you run the deployer as admin?
yes i had it fully registered with the activation code i got from an outsourced microsoft rep. I couldn't tell where he was from but he said "Y as in JELLO" and "K as in KILO" so i assume mexico.
i can download apps form the market and use all the features.
I think thats what you mean by guest. Im pretty sure i signed into zune with my live ID even.
Im going to task deuce nine it. then install this other rom i DL'd. try again.
Put new rom on it. same thing just much slower for some reason.
activated synced.
Chevron says Uh Oh. plaese make sure connected. make sure zune is running
tom xap says. make sure unlocked. zune conn.
and now xapdeploy says. error cannot start oblect referance not in instance of an object.
Goodbye windows. Hello android. Maybe ill try again after i spend a cpl hours uninstalling all this garbage off of my computer.
I dont like having to use zune anyways.
What Rom are you using? Try Xbmods rom with chevron built in already. I had trouble with chevron's independently. Whatever I tried never worked so I decided to try XBMod's and everything works like a charm though I haven't sideloaded anything except that one time. There's not much stuff to download for WP7 just yet.
I was unsure whether or not this post belonged in the Windows Phone forum, or the Windows 8. However, it just makes sense to me to put it here, so I did.
I downloaded and installed the Windows Phone SDK 7.1 Release Candidate (http://www.microsoft.com/download/en/details.aspx?id=27153) because I have a (mango beta, ISV build 7712) Samsung Focus that has been developer-unlocked (InterOp-Unlock), and frequently sideload apps to it. Did it many many time in Windows 7 with no problems whatsoever. When the Developer Preview came out, I installed it on the same machine which I used to sideload apps from. I also installed the regular things, like Zune software (4.8). Now, whenever I open XapDeploy.exe (C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v7.1\Tools\XAP Deployment) , I get this error message:
Exception from HRESULT: 0x89721800
I have tried to work my Bing magic to no avail. I have tried many of the solutions found on forums online to fix this, but to no avail. I have uninstalled, reinstalled, and repaired the Windows Phone SDK 7.1 Release Candidate with no fruition. Does this work in Windows 8 at all? If yes, then how can I fix my problem. If no, are there other XAP deployers that *do* work in Windows 8? Please help!!
Same error... I've to switch to Windows 7 to deploy .xap.
Sent from my Samsung Omnia 7 using XDA Windows Phone 7 App
Try to use XAPDeployX-V0.9
you can find on the internet
That's great work!!
Yeah, that one didn't work either. Funnily enough, I got the same error, just in a different message.
"Error: Unable to start. (Exception from HRESULT: 0x89721800)"
Anyone??? Please??
That was using XAPDeployX by the way. I have tried a couple of other ones, but they didn't work. Does anyone have a clue???
I've tried about 4 different ones. I think its because they all rely on the SDK to be working. So I'm now partitioning my drive and getting XP on here so I don't have to use my old computer. Lol.
MultiXapInstall v1.1 work for me
I tried that too, and when I tried to deploy, it just crashed and quit with no error. Anyone have ANYTHING???