[Q] How to get into clwmod recovery after flashing? - HD2 Android Q&A, Help & Troubleshooting and Genera

Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?

emilianos said:
Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?
Click to expand...
Click to collapse
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load

simpler answer is to press the power on button and hold it pressed until you are in magldr menu. there you can select ad recovery
yaely_ole said:
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load
Click to expand...
Click to collapse

If you're using cLk, hold the home button.

Related

Question about SD Android

Do i unzip the file and put every folder separately on the SD card ???
Or do i put the zip file on the SD card ???
Argentinakidd said:
Do i unzip the file and put every folder separately on the SD card ???
Or do i put the zip file on the SD card ???
Click to expand...
Click to collapse
Hi,
I'm not quite sure what you are trying to do,but if you are attempting to install a NAND ROM ,You must place the ZIP onto root of your sd card.
More information is required:
Are you using magldr or clk,
Is this your first attempt?
What have you done up to this point?
if you are talking about the SD version of android, you unzip it into Android folder and run the two files.
Alright, this is what i'm doing .
First i deleted everything off my SD card, then i unzipped the file, then it comes up as 3 folders, so i put those in my SD card, then i install MAGLDR, then i install CLK, and then i chose the option to boot from SD card from the MAGLDR menu but nothing happens.
If it's any help, i'm trying to do this : http://forum.xda-developers.com/showthread.php?t=905060
You're trying to install it through CWM/ Clockwork Mod.
Follow the instructions on his thread, READ, not scan, skim, survey, READ! He has two methods presented, one with installation for cLK (a bootloader for android) and installation for MAGLDR (a bootloader for android and WP7). Use either guides he has.
Sorry, i'm a noob .
But look : Download MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M.zip (5.1 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.0.2.5 (MAGLDR_recovery_3.0.2.5.img).
Says you gotta do both .. :/
Do both what? He's just presenting steps. Just do what he says. Using the vol down/up keys, and the call button to select, pick USB flasher. Plug phone into computer. Flash the daf.exe from the zip he presented above his instruction.
Then proceed with what he says. Please read. Reading is a fundamental, universal skill needed to get through life, not just used to improve your experience in xda.
Argentinakidd said:
Alright, this is what i'm doing .
First i deleted everything off my SD card, then i unzipped the file, then it comes up as 3 folders, so i put those in my SD card, then i install MAGLDR, then i install CLK, and then i chose the option to boot from SD card from the MAGLDR menu but nothing happens.
If it's any help, i'm trying to do this : http://forum.xda-developers.com/showthread.php?t=905060
Click to expand...
Click to collapse
Ok,
I can see you very confused...
Magldr and clk are both bootloaders.
You only need ONE.
What was the name of the file you unzipped?
Reboot your phone and when it starts and vibrates ,hold the "end call" button on the right.
If you see this:
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
1. Boot WPH
2. Boot AD SD
3. Boot AD NAND
4. USB Mass Stg
5. USB Flasher
6. USB TTY
7. AD Hard reset
8. AD Recovery
9. Tetris
10. Services
11. Reset
12. Power Down
then you have MAGLDR installed.
edit:curse my slow typing.
3 posts while I was plodding.
Dunno if I helped
I know i have MAGLDR installed because i did it a coupe hours ago ..
I just don't know what to do with all the files & folders i get when i unzip the ROM .
This is way too confusing for my tiny brain .. :/
Kailkti said:
Do both what? He's just presenting steps. Just do what he says. Using the vol down/up keys, and the call button to select, pick USB flasher. Plug phone into computer. Flash the daf.exe from the zip he presented above his instruction.
Then proceed with what he says. Please read. Reading is a fundamental, universal skill needed to get through life, not just used to improve your experience in xda.
Click to expand...
Click to collapse
It says that first you have to install MAGLDR and THEN enter into CLW ..
Look : " Enter ClockworkMod Recovery when you're on MAGLDR 1.13 "
Sorry, this is just really confusing for me
See, this is how i have the files in my SD card, then i go to Boot AD SD and it doesn't work :/
Well might as well write a guide for you. XP
Download MAGLDR 1.13.
Install MAGLDR from the tri color screen, which is accessible from powering on the device whilst holding volume down.
Download the CWM 150mb partition.
Turn on your phone whilst holding the power button.
Navigate to usb flasher
Plug phone into computer
Flash the daf. Exe in the Cwm file you downloaded.
Download your android build.
Put the build on the root of your device.
Power up your phone whilst holding power button.
Navigate to ad recovery
Navigate to install zip from sd
Navigate to select zip from sd
Select the zip to install.
Navigate to yes.
Wait for it to install despite how long.
When done, go back and navigate to reboot device.
Note the word zip. Meaning don't unzip the build.
Sent from my GT-I9000 using XDA Premium App
I did all that a little bit sooner before you posted it ! Lol
Many thanks !
It wasn't that hard, just a bit confusing !
Kailkti said:
Well might as well write a guide for you. XP
Download MAGLDR 1.13.
Install MAGLDR from the tri color screen, which is accessible from powering on the device whilst holding volume down.
Download the CWM 150mb partition.
Turn on your phone whilst holding the power button.
Navigate to usb flasher
Plug phone into computer
Flash the daf. Exe in the Cwm file you downloaded.
Download your android build.
Put the build on the root of your device.
Power up your phone whilst holding power button.
Navigate to ad recovery
Navigate to install zip from sd
Navigate to select zip from sd
Select the zip to install.
Navigate to yes.
Wait for it to install despite how long.
When done, go back and navigate to reboot device.
Note the word zip. Meaning don't unzip the build.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I did all that a little bit sooner before you posted it ! Lol
Many thanks !
It wasn't that hard, just a bit confusing !

[Q] Installing gingerbread 2.3.4

Hi,
I am going to install this on my phone today but just have a couple of questions. I currently have HSPL and MAGLDR on my phone as I flashed Leo 2.2 last week to get rid of the awful WM6.5 that came with the phone.
Installation Guide for MAGLDR 1.13:
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Flash ClockworkMod Recovery
Download MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M.zip (5.1 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.0.2.5 (MAGLDR_recovery_3.0.2.5.img).
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip (84.51 MB) Do I have to copy NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip to my SD card and run it from there? Also do I just copt it to root?
Any help would be much appreciated.
Regards
S
just copy it to root and flash it
Enter ClockworkMod Recovery
AD Recovery
Flash NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip
Do I need to rename the file to update.zip or can I juat keep the full file name?
Regards
S
You can keep it, then use "choose zip from sd" in cwm.

How to Bypass cLK Fastboot screen!

I noticed many of you including myself, while trying to install cLK using RUU in order to run NAND get stuck at the Fast boot screen (forgot to update the kernel).
At that stage the SD card seems inaccessible and your phone won't respond to hard resetting. Well I found the solution to restore your phone back to normal!!
Suggest you grab ksubedi's HD2 tool and (assuming you already have HSPL installed)
1. Power off the phone (pull the battery if required)
2. Hold on the Vol Down key, press power
3. Connect to the computer, on the red-blue-green-white screen, wait for Serial to change to USB (if not install WMDC)
4. Run the HD2 toolkit, choose Task29 (this will wipe your phone out)
5. When the phone reboots, hold down the vol again to get back to the red-blue-green-white screen, ensure you see USB
6. Choose cLK Repartition, choose the right partition sizes (150 MB with 5 MB cache works for most non-sense ROMs), hit "Repartition"
7. When the phone reboots, press the Back button on the phone, wait till you get the Fast Boot processing commands screen (If you dont get this, you need to install the ADB drivers)
8. Choose cLK Install Recovery, hit "Install", press "Yes", follow instructions
Now download one of Energy Roms (which I prefer)
http://nrgz28.sylvester20007.com/Leo/Cookie/index.php
9. Extract the rom on your desktop
10. Open up your HD2 toolkit again
11. In the bottom of it, Click browse and select the NBH file on your desktop
12. Reboots, hold down the vol again to get back to the red-blue-green-white screen, ensure you see USB
13. Then Click install RUU on the HD2 toolkit to flash the new rom
Enjoy! and Thanks to ph03n!x
Thank me why, am just about to post something to contribute here
If you have the Android SDK's ADB/ Fastboot, and are stuck in the cLK Fast Boot screen, you can issue "fastboot reboot" from the folder where you have extracted fastboot.exe to reboot the phone, of course with the phone connected. This saves you from opening the battery cover to reboot.
And if you are in the fast boot screen already, dont bother doing a Task 29 again. Just open ksubedi's HD2 toolkit and install cLK recovery.
Finally, after installing recovery, hold down the Home key when the phone reboots - this will take you to recovery. In recovery, choose mounts and storage > mount USB to get access to the phone's SD Card (when plugged in to the computer, of course!). Copy your favorite .zip ROM to the SD Card, and flash it through "Install zip from SD Card" > Choose Zip.

HTC HD2 custom rom freezing in bootup

Hi
I have a HTC HD2 bought in Norway.
I want to run Android on this instead of WPH.
What I have done is:
1: Installed MAGLDR 1.13
2: I used HSPL4 and installed HSPL2.08
3: I have the radio versjon 2.15.50.14.
4: I booted up in MAGLDR, and flashed the ROM via menu 5, Flash via USB.
5: I have downloaded the DFT_LEO_NAND_Android, and ran the DAF-tool.
Everything looks good, but when it is finished, the phone restarts, and boots up in nand, 1 2 3 4 5 6, GO, GO, GO, the Android logo shows, and nothing more!
This also happens if I try to boot up from SD-card with an Android folder with a custom ROM, its freezing on the green HTC-logo aften MAGLDR boot.
I have deleted my WPH image, so I cant boot up in windows anymore.
I have tryed to hard-reset the phone (hold down volume up and down + power + reset).
I have NEVER come it to bootloader with green, red, brue and white screen during bootup. Only time I got this, was when I ran the ROMUpdateUtility in windows when the phone still ran WPH. This I can not do anymore due that I cant boot Windows anymore.
Can I flash any WPH ROM i MAGLDR?
Should I install ClockworkRecovery? How?
Can someone please help! Thanks.
abbamust said:
Hi
I have a HTC HD2 bought in Norway.
I want to run Android on this instead of WPH.
What I have done is:
1: Installed MAGLDR 1.13
2: I used HSPL4 and installed HSPL2.08
3: I have the radio versjon 2.15.50.14.
4: I booted up in MAGLDR, and flashed the ROM via menu 5, Flash via USB.
5: I have downloaded the DFT_LEO_NAND_Android, and ran the DAF-tool.
Everything looks good, but when it is finished, the phone restarts, and boots up in nand, 1 2 3 4 5 6, GO, GO, GO, the Android logo shows, and nothing more!
This also happens if I try to boot up from SD-card with an Android folder with a custom ROM, its freezing on the green HTC-logo aften MAGLDR boot.
I have deleted my WPH image, so I cant boot up in windows anymore.
I have tryed to hard-reset the phone (hold down volume up and down + power + reset).
I have NEVER come it to bootloader with green, red, brue and white screen during bootup. Only time I got this, was when I ran the ROMUpdateUtility in windows when the phone still ran WPH. This I can not do anymore due that I cant boot Windows anymore.
Can I flash any WPH ROM i MAGLDR?
Should I install ClockworkRecovery? How?
Can someone please help! Thanks.
Click to expand...
Click to collapse
download and install this tool to pc.
http://forum.xda-developers.com/showthread.php?t=1090783
1)go to android nand thread and find a rom to your pleasure
2)in op of rom find which nand partition you need
3)using tool arrange and apply this nand partition in usb flasher mode (e.g. if it says 5-180-5 you'll choose custom at left column and 5 as cache,then click repartition and write 180 in the coming window.)
4)if your hd2 is eu,then make an ext partition. in mgldr:ad recovery-advanced-partition sd card-choose 1024-choose 0.(this procedure will wipe everything in sd)
5)put your rom.zip file to sd: in mgldr:ad recovery-monts and storage-mount usb storage-send your file to sd
6)now press back button-select install zip from sd-choose zip rom sd-find your rom.zip.
7)after installation is complete reboot.
Thanks, but where can I find which nand partition I need?
Ex, MDJ_Gingerbread or, JDMS, DTF_LEO_NAND
abbamust said:
Thanks, but where can I find which nand partition I need?
Ex, MDJ_Gingerbread or, JDMS, DTF_LEO_NAND
Click to expand...
Click to collapse
can you give the link of the rom you want to use?
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
abbamust said:
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
Click to expand...
Click to collapse
To flash clockworkmod, you use USB Flasher mode (in Magldr). To enter clockworkmod recovery afterwards, you go to 8. AD Recovery. Going to boot AD will not go into the recovery.
abbamust said:
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
Click to expand...
Click to collapse
i used the third rom (typhoon's) before. it needs 150-5 partition. the other two are very old roms. so using nand tool,make 150-5 partition in mgldr usb flasher mode.then try going to ad recovery again.it should work.
Nigeldg said:
To flash clockworkmod, you use USB Flasher mode (in Magldr). To enter clockworkmod recovery afterwards, you go to 8. AD Recovery. Going to boot AD will not go into the recovery.
Click to expand...
Click to collapse
Sorry, I ment AD Recovery, and the phone goes not i Cloclwork recovery anyway...
mutil said:
i used the third rom (typhoon's) before. it needs 150-5 partition. the other two are very old roms. so using nand tool,make 150-5 partition in mgldr usb flasher mode.then try going to ad recovery again.it should work.
Click to expand...
Click to collapse
This is what happens when I try to enter ad recovery.
This is what happen when I try to load AD from SD.
Here it just freezes.
abbamust said:
This is what happens when I try to enter ad recovery.
Click to expand...
Click to collapse
this screen is normal, but it must go further after this screen. what i say, if you apply nand partition again this problem may be solved.because it will give you a new ad recovery.if it doesnt work we can try a different recovery.
mutil said:
this screen is normal, but it must go further after this screen. what i say, if you apply nand partition again this problem may be solved.because it will give you a new ad recovery.if it doesnt work we can try a different recovery.
Click to expand...
Click to collapse
I use the Recovery_150M now, and till just hangs when I enter ad recovery.
Witch else can I use?
abbamust said:
I use the Recovery_150M now, and till just hangs when I enter ad recovery.
Witch else can I use?
Click to expand...
Click to collapse
http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13142666346961
download and unrar this.connect your phone to pc. in mgldr choose 'usb flasher'. see usb flasher...usb in phone screen.-in unrared folder right click on daf.exe-run as administrator.then install your rom.zip from sd.
mutil said:
http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13142666346961
download and unrar this.connect your phone to pc. in mgldr choose 'usb flasher'. see usb flasher...usb in phone screen.-in unrared folder right click on daf.exe-run as administrator.then install your rom.zip from sd.
Click to expand...
Click to collapse
Thank you for trying to help me.
The new recovery got flashed nice, but at bootup on SD-card witch I put the Typhoon CM7 android, it freezes at bootup. 123456 GO GO GO. and then android picture, nothing more. I have waited for maybe 1 hour for the installation.
Is my phone briked now?
one little ting.
seems like i have aMAGLDR v1.13.
abbamust said:
Thank you for trying to help me.
The new recovery got flashed nice, but at bootup on SD-card witch I put the Typhoon CM7 android, it freezes at bootup. 123456 GO GO GO. and then android picture, nothing more. I have waited for maybe 1 hour for the installation.
Is my phone briked now?
Click to expand...
Click to collapse
i dont think so. now in ad recovery wipe data/factory reset then try flashing the rom again.if it doesnt work download a new copy of rom and send it to sd, wipe data/factory reset and flash.
mutil said:
i dont think so. now in ad recovery wipe data/factory reset then try flashing the rom again.if it doesnt work download a new copy of rom and send it to sd, wipe data/factory reset and flash.
Click to expand...
Click to collapse
OK, when I go in ad recovery, I got no new menu. Only screen like this:
ANDROID LOAD RAW
[K]11808800:28BC18 *****************
Load done!
123456
GO GO GO!
And nothing more...
And when you say flash new rom, for the TyphoonN_CM7_v2.7.4, do you mean copy those to files to root of SD, and then boot from SD?
Only ROM I can flash via USB flasher mode is a DFT LEO NAND Android. And If I do that, it freezes at the DFT-logo...
abbamust said:
OK, when I go in ad recovery, I got no new menu. Only screen like this:
ANDROID LOAD RAW
[K]11808800:28BC18 *****************
Load done!
123456
GO GO GO!
And nothing more...
And when you say flash new rom, for the TyphoonN_CM7_v2.7.4, do you mean copy those to files to root of SD, and then boot from SD?
Only ROM I can flash via USB flasher mode is a DFT LEO NAND Android. And If I do that, it freezes at the DFT-logo...
Click to expand...
Click to collapse
you must put your rom.zip to sd root, not unzipped files. but that doesn't work if you cannot go to ad recovery menu.
as a last chance can you format your sd card using panasonic sd formatter,then flash recovery partition, then see if recovery menu comes.
mutil said:
you must put your rom.zip to sd root, not unzipped files. but that doesn't work if you cannot go to ad recovery menu.
as a last chance can you format your sd card using panasonic sd formatter,then flash recovery partition, then see if recovery menu comes.
Click to expand...
Click to collapse
Did that now, formattet SD card with panasonic sd formatter, flashed the recovery you sent me, and then try to enter ad recovery. This shows up:
ANDROID LOAD RAW
[K]1180800:2B78E8 12800000:22FDEF 11800100
Load done!
123456
GO GO GO!
Nothing more!
abbamust said:
Did that now, formattet SD card with panasonic sd formatter, flashed the recovery you sent me, and then try to enter ad recovery. This shows up:
ANDROID LOAD RAW
[K]1180800:2B78E8 12800000:22FDEF 11800100
Load done!
123456
GO GO GO!
Nothing more!
Click to expand...
Click to collapse
i'll just get crazy.
now we'll try going to recovery by sd method. download the attached file, unrar it.put the extracted folder to sd card.
in mgldr go to services-boot settings-ad sd dir-find our folder in list and choose-you'll go to mgldr menu automatically.now choose 2nd choice ad sd.this must send you to recovery menu.then install your rom.zip following instructions in former posts.

[Q] HD2 NAND Toolkit

So i bought my first HD2 (EU version) from ebay a week ago and i've been trying to install custom roms since then.
I've been following the instructions from the NAND Toolkit thread but i could not install the ClockworkMod Recovery 5.0.2.6, because when the cmd command window appears it it stops at ( *daemon started successfully* ).
I have installed right now update recovery 3.0.0.5 which i found somewhere else but still not all roms work. The only rom that works is this: http://forum.xda-developers.com/showthread.php?t=1441462
Can someone help how to install ClockworkMod Recovery 5.0.2.6 manually or with some other way
HTC HD2
aMAGLDR V1.13
SPL - 2.08.HSPL
ClockworkMod Recovery 3.0.0.5
Install clockwork through magdlr... seems like your installing through fastboot.
Hope this helps.
Sent from my HTC HD2 using xda premium
Difference
What's the difference and how do i actually do that????
john_gr said:
What's the difference and how do i actually do that????
Click to expand...
Click to collapse
Just see this guide and download any of the recoveries at the bottom of the post. All you have to do is put your phone in USB Flasher, connect it to the PC and run the DAF.exe file within the selected CWM folder. If you want to change the recovery size, just open 'flash.cfg' (not flash.cfg.txt) with notepad or something similar (Windows has it preinstalled, dunno about other computers) and change the system partition value.
To be honest, I don't know how using the manual method would help over using the Toolkit, but the guide I linked worked perfectly for me, so try it out I guess
Try:
D. How do i install recovery / do a repartition on MAGLDR?
1) Choose MAGLDR Repartition on top.
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
E. How do i update recovery on MAGLDR?
1) Choose MAGLDR update recovery on top.
2) Press Update button on bottom left corner.
3) Follow instructions.
taken from here http://forum.xda-developers.com/showthread.php?t=1090783
repost
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
hi John_gr
maybe you can try this method?
http://forum.xda-developers.com/showthread.php?p=25322357#post25322357
after you repartition in magldr CWM will be installed then just go Magldr (phone booting) then select #8 AD Recovery
john_gr said:
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
Click to expand...
Click to collapse
2) Check in your rom tread what partitions are advised and then choose the correct sizes. Cashe size you can put 5 or 10 MB.
And then follow point 3 and 4
As for your second question probably it's becouse you didn't install recovery correct.
john_gr said:
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
Click to expand...
Click to collapse
Why would USB debugging matter? You use USB Flasher in MAGLDR to flash CWM

Categories

Resources