Database Users

Question about SD Android

Do i unzip the file and put every folder separately on the SD card ???
Or do i put the zip file on the SD card ???

Argentinakidd said:
Do i unzip the file and put every folder separately on the SD card ???
Or do i put the zip file on the SD card ???
Click to expand...
Click to collapse
Hi,
I'm not quite sure what you are trying to do,but if you are attempting to install a NAND ROM ,You must place the ZIP onto root of your sd card.
More information is required:
Are you using magldr or clk,
Is this your first attempt?
What have you done up to this point?

if you are talking about the SD version of android, you unzip it into Android folder and run the two files.

Alright, this is what i'm doing .
First i deleted everything off my SD card, then i unzipped the file, then it comes up as 3 folders, so i put those in my SD card, then i install MAGLDR, then i install CLK, and then i chose the option to boot from SD card from the MAGLDR menu but nothing happens.
If it's any help, i'm trying to do this : http://forum.xda-developers.com/showthread.php?t=905060

You're trying to install it through CWM/ Clockwork Mod.
Follow the instructions on his thread, READ, not scan, skim, survey, READ! He has two methods presented, one with installation for cLK (a bootloader for android) and installation for MAGLDR (a bootloader for android and WP7). Use either guides he has.

Sorry, i'm a noob .
But look : Download MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M.zip (5.1 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.0.2.5 (MAGLDR_recovery_3.0.2.5.img).
Says you gotta do both .. :/

Do both what? He's just presenting steps. Just do what he says. Using the vol down/up keys, and the call button to select, pick USB flasher. Plug phone into computer. Flash the daf.exe from the zip he presented above his instruction.
Then proceed with what he says. Please read. Reading is a fundamental, universal skill needed to get through life, not just used to improve your experience in xda.

Argentinakidd said:
Alright, this is what i'm doing .
First i deleted everything off my SD card, then i unzipped the file, then it comes up as 3 folders, so i put those in my SD card, then i install MAGLDR, then i install CLK, and then i chose the option to boot from SD card from the MAGLDR menu but nothing happens.
If it's any help, i'm trying to do this : http://forum.xda-developers.com/showthread.php?t=905060
Click to expand...
Click to collapse
Ok,
I can see you very confused...
Magldr and clk are both bootloaders.
You only need ONE.
What was the name of the file you unzipped?
Reboot your phone and when it starts and vibrates ,hold the "end call" button on the right.
If you see this:
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
1. Boot WPH
2. Boot AD SD
3. Boot AD NAND
4. USB Mass Stg
5. USB Flasher
6. USB TTY
7. AD Hard reset
8. AD Recovery
9. Tetris
10. Services
11. Reset
12. Power Down
then you have MAGLDR installed.
edit:curse my slow typing.
3 posts while I was plodding.
Dunno if I helped

I know i have MAGLDR installed because i did it a coupe hours ago ..
I just don't know what to do with all the files & folders i get when i unzip the ROM .
This is way too confusing for my tiny brain .. :/

Kailkti said:
Do both what? He's just presenting steps. Just do what he says. Using the vol down/up keys, and the call button to select, pick USB flasher. Plug phone into computer. Flash the daf.exe from the zip he presented above his instruction.
Then proceed with what he says. Please read. Reading is a fundamental, universal skill needed to get through life, not just used to improve your experience in xda.
Click to expand...
Click to collapse
It says that first you have to install MAGLDR and THEN enter into CLW ..
Look : " Enter ClockworkMod Recovery when you're on MAGLDR 1.13 "
Sorry, this is just really confusing for me

See, this is how i have the files in my SD card, then i go to Boot AD SD and it doesn't work :/

Well might as well write a guide for you. XP
Download MAGLDR 1.13.
Install MAGLDR from the tri color screen, which is accessible from powering on the device whilst holding volume down.
Download the CWM 150mb partition.
Turn on your phone whilst holding the power button.
Navigate to usb flasher
Plug phone into computer
Flash the daf. Exe in the Cwm file you downloaded.
Download your android build.
Put the build on the root of your device.
Power up your phone whilst holding power button.
Navigate to ad recovery
Navigate to install zip from sd
Navigate to select zip from sd
Select the zip to install.
Navigate to yes.
Wait for it to install despite how long.
When done, go back and navigate to reboot device.
Note the word zip. Meaning don't unzip the build.
Sent from my GT-I9000 using XDA Premium App

I did all that a little bit sooner before you posted it ! Lol
Many thanks !
It wasn't that hard, just a bit confusing !

Kailkti said:
Well might as well write a guide for you. XP
Download MAGLDR 1.13.
Install MAGLDR from the tri color screen, which is accessible from powering on the device whilst holding volume down.
Download the CWM 150mb partition.
Turn on your phone whilst holding the power button.
Navigate to usb flasher
Plug phone into computer
Flash the daf. Exe in the Cwm file you downloaded.
Download your android build.
Put the build on the root of your device.
Power up your phone whilst holding power button.
Navigate to ad recovery
Navigate to install zip from sd
Navigate to select zip from sd
Select the zip to install.
Navigate to yes.
Wait for it to install despite how long.
When done, go back and navigate to reboot device.
Note the word zip. Meaning don't unzip the build.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I did all that a little bit sooner before you posted it ! Lol
Many thanks !
It wasn't that hard, just a bit confusing !

[Q] How to get into clwmod recovery after flashing?

Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?

emilianos said:
Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?
Click to expand...
Click to collapse
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load

simpler answer is to press the power on button and hold it pressed until you are in magldr menu. there you can select ad recovery
yaely_ole said:
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load
Click to expand...
Click to collapse

If you're using cLk, hold the home button.

Someone Help

Hi,
I keep having problems every time installing a Nana Android on my HD2.
I have looked at Installing for Newbies but keeps giving me error messages.
I have gone back to Stock Win Mobile 6.5 as I'm having troubles.
Can someone help me?

xda_apprentice said:
Hi,
I keep having problems every time installing a Nana Android on my HD2.
I have looked at Installing for Newbies but keeps giving me error messages.
I have gone back to Stock Win Mobile 6.5 as I'm having troubles.
Can someone help me?
Click to expand...
Click to collapse
First of all calm down mate... dont get nervous,
You need to be more specific with the error thing you are telling us..so we can help you
So plz provide us with more info about the error you are getting and when you are getting it(on which step of the nand setup).

Dakargr said:
First of all calm down mate... dont get nervous,
You need to be more specific with the error thing you are telling us..so we can help you
So plz provide us with more info about the error you are getting and when you are getting it(on which step of the nand setup).
Click to expand...
Click to collapse
Thanks for your reply.
I am back on Win Mobile 6.5. I want this rom :
http://forum.xda-developers.com/showthread.php?t=1264828
I read 'Install nand for Newbie' but happened was I used HTC HD2 Tool kit to:
Wipe29, install Magldr, install Radio butit made stuck in HTC Screen.
Where am I going wrong?

xda_apprentice said:
Thanks for your reply.
I am back on Win Mobile 6.5. I want this rom :
http://forum.xda-developers.com/showthread.php?t=1264828
I read 'Install nand for Newbie' but happened was I used HTC HD2 Tool kit to:
Wipe29, install Magldr, install Radio butit made stuck in HTC Screen.
Where am I going wrong?
Click to expand...
Click to collapse
So from what you stated here you Task29, MAGLDR, Radio (which one byt the way) but did you install Clockworkmod recovery? If you have done nothing then that's why you are stuck at HTC screen as you have no OS or anything loaded yet. MAGLDR is the only thing you have installed.
From your steps you then need to:
1. Install the appropriate recovery (which I and another user had linked you to in another one of your posts)
2. Boot into MAGLDR (by holding power button) and then boot into CWM recovery
3. Partition your sdcard with your desired size (512-1024mb respectively but do not forget to backup the contents of your sdcard as partitioning will format it)
4. Transfer the rom you want to your sdcard
5. Flash it from CWM recovery
6. Reboot
7. Enjoy Nand android build and go have a donut
Post if you have additional questions

chrisrj28 said:
So from what you stated here you Task29, MAGLDR, Radio (which one byt the way) but did you install Clockworkmod recovery? If you have done nothing then that's why you are stuck at HTC screen as you have no OS or anything loaded yet. MAGLDR is the only thing you have installed.
From your steps you then need to:
1. Install the appropriate recovery (which I and another user had linked you to in another one of your posts)
2. Boot into MAGLDR (by holding power button) and then boot into CWM recovery
3. Partition your sdcard with your desired size (512-1024mb respectively but do not forget to backup the contents of your sdcard as partitioning will format it)
4. Transfer the rom you want to your sdcard
5. Flash it from CWM recovery
6. Reboot
7. Enjoy Nand android build and go have a donut
Post if you have additional questions
Click to expand...
Click to collapse
I'll just keep my Doughnut to the side until I install Android
3) How do I back it up? And how do I know what size 512 or 1024?
I'll do the above steps and will report back.
P.s. I am on Stock Windows Mobile 6.5.

xda_apprentice said:
I'll just keep my Doughnut to the side until I install Android
3) How do I back it up? And how do I know what size 512 or 1024?
I'll do the above steps and will report back.
P.s. I am on Stock Windows Mobile 6.5.
Click to expand...
Click to collapse
Nice haha,
Anyway by backup your sdcard I mean save whatever is on the card (music, pictures, etc.) to your computer, that way you can copy it back to the card after you have everything set up
As for what size to partition your sdcard, it's up to you. That partition space is the size of memory you will have to install user apps so it depends on how many you plan on using
When you make it to recovery you will see the option to partition your card, it will take you through the process.

chrisrj28 said:
Nice haha,
Anyway by backup your sdcard I mean save whatever is on the card (music, pictures, etc.) to your computer, that way you can copy it back to the card after you have everything set up
As for what size to partition your sdcard, it's up to you. That partition space is the size of memory you will have to install user apps so it depends on how many you plan on using
When you make it to recovery you will see the option to partition your card, it will take you through the process.
Click to expand...
Click to collapse
This is what I did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
After step 11, I got this message:
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736) "
My usb is clearly connected. This happened before too.

xda_apprentice said:
This is what I did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
After step 11, I got this message:
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736) "
My usb is clearly connected. This happened before too.
Click to expand...
Click to collapse
Ok after step 10 installing MAGLDR you should boot into the MAGLDR screen. Select the USB Flasher option, instead of using the Nand toolkit try downloading the recovery here: http://forum.xda-developers.com/attachment.php?attachmentid=729033&d=1316816787
and using the daf.exe try flashing it that way. Make sure MAGLDR is in USB flasher selection.

chrisrj28 said:
Ok after step 10 installing MAGLDR you should boot into the MAGLDR screen. Select the USB Flasher option, instead of using the Nand toolkit try downloading the recovery here: http://forum.xda-developers.com/attachment.php?attachmentid=729033&d=1316816787
and using the daf.exe try flashing it that way. Make sure MAGLDR is in USB flasher selection.
Click to expand...
Click to collapse
It says " Please waiting .."
But it's been doing that for 20 minutes now
I meant stuck on HTC Quietly Brilliant Screen"

xda_apprentice said:
It says " Please waiting .."
But it's been doing that for 20 minutes now
I meant stuck on HTC Quietly Brilliant Screen"
Click to expand...
Click to collapse
WHich part says please wait? When you installed MAGLDR your computer installed the drivers for it correct?

chrisrj28 said:
WHich part says please wait? When you installed MAGLDR your computer installed the drivers for it correct?
Click to expand...
Click to collapse
Yea all the drivers were correct. It just keeps looping into that screen "HTC Quietly Brilliant Screen"

xda_apprentice said:
Yea all the drivers were correct. It just keeps looping into that screen "HTC Quietly Brilliant Screen"
Click to expand...
Click to collapse
Ok so did you successfully flash the CWM recovery?

chrisrj28 said:
Ok so did you successfully flash the CWM recovery?
Click to expand...
Click to collapse
This is what I exactly did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr *Used the file you supplied
11)in toolkit at left choose 150 and write 5 instead of 45 *could not do this as I got error msg
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot

xda_apprentice said:
This is what I exactly did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr *Used the file you supplied
11)in toolkit at left choose 150 and write 5 instead of 45 *could not do this as I got error msg
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
Click to expand...
Click to collapse
Alright so you successfully booted into CWM recovery and flashed the Rom and it boot loops correct?

chrisrj28 said:
Alright so you successfully booted into CWM recovery and flashed the Rom and it boot loops correct?
Click to expand...
Click to collapse
Yes. It just loops and nothing happens

xda_apprentice said:
Yes. It just loops and nothing happens
Click to expand...
Click to collapse
Ok, boot back into MAGLDR and select USB Flasher again. Download the attached CWM Partition which I edited to 180mb partition. Click the Daf.exe and let it install. Then go to AD Recovery and flash the rom again, let me know how that works. (make sure your sdcard is already partitioned properly

chrisrj28 said:
Ok, boot back into MAGLDR and select USB Flasher again. Download the attached CWM Partition which I edited to 180mb partition. Click the Daf.exe and let it install. Then go to AD Recovery and flash the rom again, let me know how that works. (make sure your sdcard is already partitioned properly
Click to expand...
Click to collapse
I done everything as stated above. It says "Please wait ... Installing"
Then I see custom "HTC Quietly Brilliant"
And you guessed it ... it's looping
Is the rom? I did look at the website for the rom and it doesn't say anything

xda_apprentice said:
I done everything as stated above. It says "Please wait ... Installing"
Then I see custom "HTC Quietly Brilliant"
And you guessed it ... it's looping
Is the rom? I did look at the website for the rom and it doesn't say anything
Click to expand...
Click to collapse
Ok there is something being missed here. The please wait, installing part is the MAGLDR portion correct?

chrisrj28 said:
Ok there is something being missed here. The please wait, installing part is the MAGLDR portion correct?
Click to expand...
Click to collapse
How do I check/change that?

xda_apprentice said:
How do I check/change that?
Click to expand...
Click to collapse
Ok lets start from the beginning, post what you actually did step by step.

No boot sources

Hey,
I have an HD2 and I format my memory card (16GB) on FAT32 and I put ClockworkMod Recovery 1.2.7 (zImage...) on the root of the card and I go to AD Recovery and say "No boot sources"
Someone can help me?
Thanks!!
PS: I already install the HD2 Toolkit but when I go to USB Flasher my HD2 say Wait USB...USB and freeze!! :crying:

Ad recovery is to start nand recovery, you want to boot SD.
PS. Its not frozen, its waiting for you to tell the nand toolkit what you want to do.

You need initrd too.

Jakoozie said:
Hey,
I have an HD2 and I format my memory card (16GB) on FAT32 and I put ClockworkMod Recovery 1.2.7 (zImage...) on the root of the card and I go to AD Recovery and say "No boot sources"
Someone can help me?
Thanks!!
PS: I already install the HD2 Toolkit but when I go to USB Flasher my HD2 say Wait USB...USB and freeze!! :crying:
Click to expand...
Click to collapse
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy

adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse
I have used always Magloader via hd2 toolkit and it was sometimes confusing.
I can say the clk mode is better for me personal the beginning on to learn how to begin I have a link just look at it , I writed it down on a notepad.
Just have a look and maybe you will fine with that to it is spoken in German but if you have problems with that you can google further,Enjoy
http://www.youtube.com/watch?v=6WaweDagGlc

GhostScalper said:
I have used always Magloader via hd2 toolkit and it was sometimes confusing.
I can say the clk mode is better for me personal the beginning on to learn how to begin I have a link just look at it , I writed it down on a notepad.
Just have a look and maybe you will fine with that to it is spoken in German but if you have problems with that you can google further,Enjoy
http://www.youtube.com/watch?v=6WaweDagGlc
Click to expand...
Click to collapse
You are telling ME to use cLK. I dont have a problem with MAGLDR.
I think you got the wrong person. LOL

adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse
If I do this will my existing HD2O WPH 7.8 installation get messed?
I just want to try an Android ROM from another SD card (not the one that works with HD2O's ROM.)

Partitioning will remove wp7.
Get an SD android rom, put on SD card, into mgldr, set SD source to the folder you put the rom in, , choose boot ad SD

Thank you
Works as described!
adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse

AD Recovery Stuck

i have one problem
i try to install nexushd2 ics 4.0.4 v2.8
i have aMAGLDR 1.13
radio leo 2.15.50.14
HSPL 3
but when i press [green button] on AD Recovery it says: 123456 GOGOGO! and it stucks nothing happens :S i can't boot on CWM

Mr.Cobbra said:
i have one problem
i try to install nexushd2 ics 4.0.4 v2.8
i have aMAGLDR 1.13
radio leo 2.15.50.14
HSPL 3
but when i press [green button] on AD Recovery it says: 123456 GOGOGO! and it stucks nothing happens :S i can't boot on CWM
Click to expand...
Click to collapse
give more information...tell us what you did from the beginning when you tried to install it...you already had magldr and e.t.c or you wiped everything and tried to install it? have you tried to flash the recovery again?

eliaskammas said:
give more information...tell us what you did from the beginning when you tried to install it...you already had magldr and e.t.c or you wiped everything and tried to install it? have you tried to flash the recovery again?
Click to expand...
Click to collapse
i follow all this steps :/
http://www.youtube.com/watch?v=ItDPY-jGJjM

have you tried installing recovery again.? try it and tell me what happens...

Mr.Cobbra said:
i have one problem
i try to install nexushd2 ics 4.0.4 v2.8
i have aMAGLDR 1.13
radio leo 2.15.50.14
HSPL 3
but when i press [green button] on AD Recovery it says: 123456 GOGOGO! and it stucks nothing happens :S i can't boot on CWM
Click to expand...
Click to collapse
Your recovery software is either not installed or it is damaged. Magldr has nothing to load on option 8.
Run DAF.EXE again and make sure a recovery is included. Before running it change the flash.cfg file and make sure system is big enough for your rom (give it some extra space!) and that recovery has 8 MB on it instead of filesize!
---
Marriage is like a phone call in the night: first the ring, and then you wake up...* (via Tapatalk)

ny_limited said:
Your recovery software is either not installed or it is damaged. Magldr has nothing to load on option 8.
Run DAF.EXE again and make sure a recovery is included. Before running it change the flash.cfg file and make sure system is big enough for your rom (give it some extra space!) and that recovery has 8 MB on it instead of filesize!
---
Marriage is like a phone call in the night: first the ring, and then you wake up...* (via Tapatalk)
Click to expand...
Click to collapse
still same thing i reinstall Recovery 400MB System.. i store files on SD Root and i enter on AD SD and it stuck on GO GO GO i change this
misc ya 1M
recovery ya|ro 10M
boot ya|boot|ro 5M
system ya 400M
cache ya 10M
userdata ya|asize|hr allsize
i change recovery ya from 5 to 10M but still stuck, can u help me via TEAMVIEWER here is my msn [email protected] and lets talk about this prob

Mr.Cobbra said:
still same thing i reinstall Recovery 400MB System.. i store files on SD Root and i enter on AD SD and it stuck on GO GO GO i change this
misc ya 1M
recovery ya|ro 10M
boot ya|boot|ro 5M
system ya 400M
cache ya 10M
userdata ya|asize|hr allsize
i change recovery ya from 5 to 10M but still stuck, can u help me via TEAMVIEWER here is my msn [email protected] and lets talk about this prob
Click to expand...
Click to collapse
Use the ToolKit to install and repartition the recovery, maybe the recovery file you have is corrupt.