Hi,
I keep having problems every time installing a Nana Android on my HD2.
I have looked at Installing for Newbies but keeps giving me error messages.
I have gone back to Stock Win Mobile 6.5 as I'm having troubles.
Can someone help me?
xda_apprentice said:
Hi,
I keep having problems every time installing a Nana Android on my HD2.
I have looked at Installing for Newbies but keeps giving me error messages.
I have gone back to Stock Win Mobile 6.5 as I'm having troubles.
Can someone help me?
Click to expand...
Click to collapse
First of all calm down mate... dont get nervous,
You need to be more specific with the error thing you are telling us..so we can help you
So plz provide us with more info about the error you are getting and when you are getting it(on which step of the nand setup).
Dakargr said:
First of all calm down mate... dont get nervous,
You need to be more specific with the error thing you are telling us..so we can help you
So plz provide us with more info about the error you are getting and when you are getting it(on which step of the nand setup).
Click to expand...
Click to collapse
Thanks for your reply.
I am back on Win Mobile 6.5. I want this rom :
http://forum.xda-developers.com/showthread.php?t=1264828
I read 'Install nand for Newbie' but happened was I used HTC HD2 Tool kit to:
Wipe29, install Magldr, install Radio butit made stuck in HTC Screen.
Where am I going wrong?
xda_apprentice said:
Thanks for your reply.
I am back on Win Mobile 6.5. I want this rom :
http://forum.xda-developers.com/showthread.php?t=1264828
I read 'Install nand for Newbie' but happened was I used HTC HD2 Tool kit to:
Wipe29, install Magldr, install Radio butit made stuck in HTC Screen.
Where am I going wrong?
Click to expand...
Click to collapse
So from what you stated here you Task29, MAGLDR, Radio (which one byt the way) but did you install Clockworkmod recovery? If you have done nothing then that's why you are stuck at HTC screen as you have no OS or anything loaded yet. MAGLDR is the only thing you have installed.
From your steps you then need to:
1. Install the appropriate recovery (which I and another user had linked you to in another one of your posts)
2. Boot into MAGLDR (by holding power button) and then boot into CWM recovery
3. Partition your sdcard with your desired size (512-1024mb respectively but do not forget to backup the contents of your sdcard as partitioning will format it)
4. Transfer the rom you want to your sdcard
5. Flash it from CWM recovery
6. Reboot
7. Enjoy Nand android build and go have a donut
Post if you have additional questions
chrisrj28 said:
So from what you stated here you Task29, MAGLDR, Radio (which one byt the way) but did you install Clockworkmod recovery? If you have done nothing then that's why you are stuck at HTC screen as you have no OS or anything loaded yet. MAGLDR is the only thing you have installed.
From your steps you then need to:
1. Install the appropriate recovery (which I and another user had linked you to in another one of your posts)
2. Boot into MAGLDR (by holding power button) and then boot into CWM recovery
3. Partition your sdcard with your desired size (512-1024mb respectively but do not forget to backup the contents of your sdcard as partitioning will format it)
4. Transfer the rom you want to your sdcard
5. Flash it from CWM recovery
6. Reboot
7. Enjoy Nand android build and go have a donut
Post if you have additional questions
Click to expand...
Click to collapse
I'll just keep my Doughnut to the side until I install Android
3) How do I back it up? And how do I know what size 512 or 1024?
I'll do the above steps and will report back.
P.s. I am on Stock Windows Mobile 6.5.
xda_apprentice said:
I'll just keep my Doughnut to the side until I install Android
3) How do I back it up? And how do I know what size 512 or 1024?
I'll do the above steps and will report back.
P.s. I am on Stock Windows Mobile 6.5.
Click to expand...
Click to collapse
Nice haha,
Anyway by backup your sdcard I mean save whatever is on the card (music, pictures, etc.) to your computer, that way you can copy it back to the card after you have everything set up
As for what size to partition your sdcard, it's up to you. That partition space is the size of memory you will have to install user apps so it depends on how many you plan on using
When you make it to recovery you will see the option to partition your card, it will take you through the process.
chrisrj28 said:
Nice haha,
Anyway by backup your sdcard I mean save whatever is on the card (music, pictures, etc.) to your computer, that way you can copy it back to the card after you have everything set up
As for what size to partition your sdcard, it's up to you. That partition space is the size of memory you will have to install user apps so it depends on how many you plan on using
When you make it to recovery you will see the option to partition your card, it will take you through the process.
Click to expand...
Click to collapse
This is what I did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
After step 11, I got this message:
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736) "
My usb is clearly connected. This happened before too.
xda_apprentice said:
This is what I did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
After step 11, I got this message:
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736) "
My usb is clearly connected. This happened before too.
Click to expand...
Click to collapse
Ok after step 10 installing MAGLDR you should boot into the MAGLDR screen. Select the USB Flasher option, instead of using the Nand toolkit try downloading the recovery here: http://forum.xda-developers.com/attachment.php?attachmentid=729033&d=1316816787
and using the daf.exe try flashing it that way. Make sure MAGLDR is in USB flasher selection.
chrisrj28 said:
Ok after step 10 installing MAGLDR you should boot into the MAGLDR screen. Select the USB Flasher option, instead of using the Nand toolkit try downloading the recovery here: http://forum.xda-developers.com/attachment.php?attachmentid=729033&d=1316816787
and using the daf.exe try flashing it that way. Make sure MAGLDR is in USB flasher selection.
Click to expand...
Click to collapse
It says " Please waiting .."
But it's been doing that for 20 minutes now
I meant stuck on HTC Quietly Brilliant Screen"
xda_apprentice said:
It says " Please waiting .."
But it's been doing that for 20 minutes now
I meant stuck on HTC Quietly Brilliant Screen"
Click to expand...
Click to collapse
WHich part says please wait? When you installed MAGLDR your computer installed the drivers for it correct?
chrisrj28 said:
WHich part says please wait? When you installed MAGLDR your computer installed the drivers for it correct?
Click to expand...
Click to collapse
Yea all the drivers were correct. It just keeps looping into that screen "HTC Quietly Brilliant Screen"
xda_apprentice said:
Yea all the drivers were correct. It just keeps looping into that screen "HTC Quietly Brilliant Screen"
Click to expand...
Click to collapse
Ok so did you successfully flash the CWM recovery?
chrisrj28 said:
Ok so did you successfully flash the CWM recovery?
Click to expand...
Click to collapse
This is what I exactly did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr *Used the file you supplied
11)in toolkit at left choose 150 and write 5 instead of 45 *could not do this as I got error msg
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
xda_apprentice said:
This is what I exactly did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr *Used the file you supplied
11)in toolkit at left choose 150 and write 5 instead of 45 *could not do this as I got error msg
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
Click to expand...
Click to collapse
Alright so you successfully booted into CWM recovery and flashed the Rom and it boot loops correct?
chrisrj28 said:
Alright so you successfully booted into CWM recovery and flashed the Rom and it boot loops correct?
Click to expand...
Click to collapse
Yes. It just loops and nothing happens
xda_apprentice said:
Yes. It just loops and nothing happens
Click to expand...
Click to collapse
Ok, boot back into MAGLDR and select USB Flasher again. Download the attached CWM Partition which I edited to 180mb partition. Click the Daf.exe and let it install. Then go to AD Recovery and flash the rom again, let me know how that works. (make sure your sdcard is already partitioned properly
chrisrj28 said:
Ok, boot back into MAGLDR and select USB Flasher again. Download the attached CWM Partition which I edited to 180mb partition. Click the Daf.exe and let it install. Then go to AD Recovery and flash the rom again, let me know how that works. (make sure your sdcard is already partitioned properly
Click to expand...
Click to collapse
I done everything as stated above. It says "Please wait ... Installing"
Then I see custom "HTC Quietly Brilliant"
And you guessed it ... it's looping
Is the rom? I did look at the website for the rom and it doesn't say anything
xda_apprentice said:
I done everything as stated above. It says "Please wait ... Installing"
Then I see custom "HTC Quietly Brilliant"
And you guessed it ... it's looping
Is the rom? I did look at the website for the rom and it doesn't say anything
Click to expand...
Click to collapse
Ok there is something being missed here. The please wait, installing part is the MAGLDR portion correct?
chrisrj28 said:
Ok there is something being missed here. The please wait, installing part is the MAGLDR portion correct?
Click to expand...
Click to collapse
How do I check/change that?
xda_apprentice said:
How do I check/change that?
Click to expand...
Click to collapse
Ok lets start from the beginning, post what you actually did step by step.
Related
Do i unzip the file and put every folder separately on the SD card ???
Or do i put the zip file on the SD card ???
Argentinakidd said:
Do i unzip the file and put every folder separately on the SD card ???
Or do i put the zip file on the SD card ???
Click to expand...
Click to collapse
Hi,
I'm not quite sure what you are trying to do,but if you are attempting to install a NAND ROM ,You must place the ZIP onto root of your sd card.
More information is required:
Are you using magldr or clk,
Is this your first attempt?
What have you done up to this point?
if you are talking about the SD version of android, you unzip it into Android folder and run the two files.
Alright, this is what i'm doing .
First i deleted everything off my SD card, then i unzipped the file, then it comes up as 3 folders, so i put those in my SD card, then i install MAGLDR, then i install CLK, and then i chose the option to boot from SD card from the MAGLDR menu but nothing happens.
If it's any help, i'm trying to do this : http://forum.xda-developers.com/showthread.php?t=905060
You're trying to install it through CWM/ Clockwork Mod.
Follow the instructions on his thread, READ, not scan, skim, survey, READ! He has two methods presented, one with installation for cLK (a bootloader for android) and installation for MAGLDR (a bootloader for android and WP7). Use either guides he has.
Sorry, i'm a noob .
But look : Download MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M.zip (5.1 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.0.2.5 (MAGLDR_recovery_3.0.2.5.img).
Says you gotta do both .. :/
Do both what? He's just presenting steps. Just do what he says. Using the vol down/up keys, and the call button to select, pick USB flasher. Plug phone into computer. Flash the daf.exe from the zip he presented above his instruction.
Then proceed with what he says. Please read. Reading is a fundamental, universal skill needed to get through life, not just used to improve your experience in xda.
Argentinakidd said:
Alright, this is what i'm doing .
First i deleted everything off my SD card, then i unzipped the file, then it comes up as 3 folders, so i put those in my SD card, then i install MAGLDR, then i install CLK, and then i chose the option to boot from SD card from the MAGLDR menu but nothing happens.
If it's any help, i'm trying to do this : http://forum.xda-developers.com/showthread.php?t=905060
Click to expand...
Click to collapse
Ok,
I can see you very confused...
Magldr and clk are both bootloaders.
You only need ONE.
What was the name of the file you unzipped?
Reboot your phone and when it starts and vibrates ,hold the "end call" button on the right.
If you see this:
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
1. Boot WPH
2. Boot AD SD
3. Boot AD NAND
4. USB Mass Stg
5. USB Flasher
6. USB TTY
7. AD Hard reset
8. AD Recovery
9. Tetris
10. Services
11. Reset
12. Power Down
then you have MAGLDR installed.
edit:curse my slow typing.
3 posts while I was plodding.
Dunno if I helped
I know i have MAGLDR installed because i did it a coupe hours ago ..
I just don't know what to do with all the files & folders i get when i unzip the ROM .
This is way too confusing for my tiny brain .. :/
Kailkti said:
Do both what? He's just presenting steps. Just do what he says. Using the vol down/up keys, and the call button to select, pick USB flasher. Plug phone into computer. Flash the daf.exe from the zip he presented above his instruction.
Then proceed with what he says. Please read. Reading is a fundamental, universal skill needed to get through life, not just used to improve your experience in xda.
Click to expand...
Click to collapse
It says that first you have to install MAGLDR and THEN enter into CLW ..
Look : " Enter ClockworkMod Recovery when you're on MAGLDR 1.13 "
Sorry, this is just really confusing for me
See, this is how i have the files in my SD card, then i go to Boot AD SD and it doesn't work :/
Well might as well write a guide for you. XP
Download MAGLDR 1.13.
Install MAGLDR from the tri color screen, which is accessible from powering on the device whilst holding volume down.
Download the CWM 150mb partition.
Turn on your phone whilst holding the power button.
Navigate to usb flasher
Plug phone into computer
Flash the daf. Exe in the Cwm file you downloaded.
Download your android build.
Put the build on the root of your device.
Power up your phone whilst holding power button.
Navigate to ad recovery
Navigate to install zip from sd
Navigate to select zip from sd
Select the zip to install.
Navigate to yes.
Wait for it to install despite how long.
When done, go back and navigate to reboot device.
Note the word zip. Meaning don't unzip the build.
Sent from my GT-I9000 using XDA Premium App
I did all that a little bit sooner before you posted it ! Lol
Many thanks !
It wasn't that hard, just a bit confusing !
Kailkti said:
Well might as well write a guide for you. XP
Download MAGLDR 1.13.
Install MAGLDR from the tri color screen, which is accessible from powering on the device whilst holding volume down.
Download the CWM 150mb partition.
Turn on your phone whilst holding the power button.
Navigate to usb flasher
Plug phone into computer
Flash the daf. Exe in the Cwm file you downloaded.
Download your android build.
Put the build on the root of your device.
Power up your phone whilst holding power button.
Navigate to ad recovery
Navigate to install zip from sd
Navigate to select zip from sd
Select the zip to install.
Navigate to yes.
Wait for it to install despite how long.
When done, go back and navigate to reboot device.
Note the word zip. Meaning don't unzip the build.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I did all that a little bit sooner before you posted it ! Lol
Many thanks !
It wasn't that hard, just a bit confusing !
well i install android to my hd2 with the help of this threads:
http://forum.xda-developers.com/showthread.php?t=893948
but i finish the instalation and everything, is working well?(except wifi.....)
but now i want to flash this room..
http://forum.xda-developers.com/showthread.php?t=1100707
i download the "1.6v magldr" but i dont know how to install it.. this room it can be install with magldr v1.3??? or i have to use other program.. please someone help me. step by step
XPeruchoX said:
well i install android to my hd2 with the help of this threads:
http://forum.xda-developers.com/showthread.php?t=893948
but i finish the instalation and everything, is working well?(except wifi.....)
but now i want to flash this room..
http://forum.xda-developers.com/showthread.php?t=1100707
i download the "1.6v magldr" but i dont know how to install it.. this room it can be install with magldr v1.3??? or i have to use other program.. please someone help me. step by step
Click to expand...
Click to collapse
Hi,
Backup your data before you start.
Get THIS TOOL
Reboot,hold power button and go to 5 USB flasher.
On the HD2 installer select MAGLDR Repartition, 200MB,connect your USB to pc/laptop and press repartition.
Go to ad recovery>wipe data,cache partition,and dalvik(advanced)
You are then ready to flash your ROM.
Go to install zip from sd card,choose your ROM(having already placed it on the root of your sd card).
thank you very much.. but i have a problem...
i did eveything and it did install and everything.. but when i reboot it doesnt load.. is stock on a screen the saids "HTC"
what i do?
the best thing to do when you want to change the nand rom is to make a clean install ...
- task 29
- radio 2.15
- magldr 1.13
- REcovery and install the zip from the sd card
XPeruchoX said:
thank you very much.. but i have a problem...
i did eveything and it did install and everything.. but when i reboot it doesnt load.. is stock on a screen the saids "HTC"
what i do?
Click to expand...
Click to collapse
Hi,
Please start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
im gonna try it right now... thanks!!!
=)
thank you it did work!!!! great help!!!
XPeruchoX said:
thank you it did work!!!! great help!!!
Click to expand...
Click to collapse
Glad to help...
i'v been looking for this also
thank you very much
Hi
I have a HTC HD2 bought in Norway.
I want to run Android on this instead of WPH.
What I have done is:
1: Installed MAGLDR 1.13
2: I used HSPL4 and installed HSPL2.08
3: I have the radio versjon 2.15.50.14.
4: I booted up in MAGLDR, and flashed the ROM via menu 5, Flash via USB.
5: I have downloaded the DFT_LEO_NAND_Android, and ran the DAF-tool.
Everything looks good, but when it is finished, the phone restarts, and boots up in nand, 1 2 3 4 5 6, GO, GO, GO, the Android logo shows, and nothing more!
This also happens if I try to boot up from SD-card with an Android folder with a custom ROM, its freezing on the green HTC-logo aften MAGLDR boot.
I have deleted my WPH image, so I cant boot up in windows anymore.
I have tryed to hard-reset the phone (hold down volume up and down + power + reset).
I have NEVER come it to bootloader with green, red, brue and white screen during bootup. Only time I got this, was when I ran the ROMUpdateUtility in windows when the phone still ran WPH. This I can not do anymore due that I cant boot Windows anymore.
Can I flash any WPH ROM i MAGLDR?
Should I install ClockworkRecovery? How?
Can someone please help! Thanks.
abbamust said:
Hi
I have a HTC HD2 bought in Norway.
I want to run Android on this instead of WPH.
What I have done is:
1: Installed MAGLDR 1.13
2: I used HSPL4 and installed HSPL2.08
3: I have the radio versjon 2.15.50.14.
4: I booted up in MAGLDR, and flashed the ROM via menu 5, Flash via USB.
5: I have downloaded the DFT_LEO_NAND_Android, and ran the DAF-tool.
Everything looks good, but when it is finished, the phone restarts, and boots up in nand, 1 2 3 4 5 6, GO, GO, GO, the Android logo shows, and nothing more!
This also happens if I try to boot up from SD-card with an Android folder with a custom ROM, its freezing on the green HTC-logo aften MAGLDR boot.
I have deleted my WPH image, so I cant boot up in windows anymore.
I have tryed to hard-reset the phone (hold down volume up and down + power + reset).
I have NEVER come it to bootloader with green, red, brue and white screen during bootup. Only time I got this, was when I ran the ROMUpdateUtility in windows when the phone still ran WPH. This I can not do anymore due that I cant boot Windows anymore.
Can I flash any WPH ROM i MAGLDR?
Should I install ClockworkRecovery? How?
Can someone please help! Thanks.
Click to expand...
Click to collapse
download and install this tool to pc.
http://forum.xda-developers.com/showthread.php?t=1090783
1)go to android nand thread and find a rom to your pleasure
2)in op of rom find which nand partition you need
3)using tool arrange and apply this nand partition in usb flasher mode (e.g. if it says 5-180-5 you'll choose custom at left column and 5 as cache,then click repartition and write 180 in the coming window.)
4)if your hd2 is eu,then make an ext partition. in mgldr:ad recovery-advanced-partition sd card-choose 1024-choose 0.(this procedure will wipe everything in sd)
5)put your rom.zip file to sd: in mgldr:ad recovery-monts and storage-mount usb storage-send your file to sd
6)now press back button-select install zip from sd-choose zip rom sd-find your rom.zip.
7)after installation is complete reboot.
Thanks, but where can I find which nand partition I need?
Ex, MDJ_Gingerbread or, JDMS, DTF_LEO_NAND
abbamust said:
Thanks, but where can I find which nand partition I need?
Ex, MDJ_Gingerbread or, JDMS, DTF_LEO_NAND
Click to expand...
Click to collapse
can you give the link of the rom you want to use?
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
abbamust said:
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
Click to expand...
Click to collapse
To flash clockworkmod, you use USB Flasher mode (in Magldr). To enter clockworkmod recovery afterwards, you go to 8. AD Recovery. Going to boot AD will not go into the recovery.
abbamust said:
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
Click to expand...
Click to collapse
i used the third rom (typhoon's) before. it needs 150-5 partition. the other two are very old roms. so using nand tool,make 150-5 partition in mgldr usb flasher mode.then try going to ad recovery again.it should work.
Nigeldg said:
To flash clockworkmod, you use USB Flasher mode (in Magldr). To enter clockworkmod recovery afterwards, you go to 8. AD Recovery. Going to boot AD will not go into the recovery.
Click to expand...
Click to collapse
Sorry, I ment AD Recovery, and the phone goes not i Cloclwork recovery anyway...
mutil said:
i used the third rom (typhoon's) before. it needs 150-5 partition. the other two are very old roms. so using nand tool,make 150-5 partition in mgldr usb flasher mode.then try going to ad recovery again.it should work.
Click to expand...
Click to collapse
This is what happens when I try to enter ad recovery.
This is what happen when I try to load AD from SD.
Here it just freezes.
abbamust said:
This is what happens when I try to enter ad recovery.
Click to expand...
Click to collapse
this screen is normal, but it must go further after this screen. what i say, if you apply nand partition again this problem may be solved.because it will give you a new ad recovery.if it doesnt work we can try a different recovery.
mutil said:
this screen is normal, but it must go further after this screen. what i say, if you apply nand partition again this problem may be solved.because it will give you a new ad recovery.if it doesnt work we can try a different recovery.
Click to expand...
Click to collapse
I use the Recovery_150M now, and till just hangs when I enter ad recovery.
Witch else can I use?
abbamust said:
I use the Recovery_150M now, and till just hangs when I enter ad recovery.
Witch else can I use?
Click to expand...
Click to collapse
http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13142666346961
download and unrar this.connect your phone to pc. in mgldr choose 'usb flasher'. see usb flasher...usb in phone screen.-in unrared folder right click on daf.exe-run as administrator.then install your rom.zip from sd.
mutil said:
http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13142666346961
download and unrar this.connect your phone to pc. in mgldr choose 'usb flasher'. see usb flasher...usb in phone screen.-in unrared folder right click on daf.exe-run as administrator.then install your rom.zip from sd.
Click to expand...
Click to collapse
Thank you for trying to help me.
The new recovery got flashed nice, but at bootup on SD-card witch I put the Typhoon CM7 android, it freezes at bootup. 123456 GO GO GO. and then android picture, nothing more. I have waited for maybe 1 hour for the installation.
Is my phone briked now?
one little ting.
seems like i have aMAGLDR v1.13.
abbamust said:
Thank you for trying to help me.
The new recovery got flashed nice, but at bootup on SD-card witch I put the Typhoon CM7 android, it freezes at bootup. 123456 GO GO GO. and then android picture, nothing more. I have waited for maybe 1 hour for the installation.
Is my phone briked now?
Click to expand...
Click to collapse
i dont think so. now in ad recovery wipe data/factory reset then try flashing the rom again.if it doesnt work download a new copy of rom and send it to sd, wipe data/factory reset and flash.
mutil said:
i dont think so. now in ad recovery wipe data/factory reset then try flashing the rom again.if it doesnt work download a new copy of rom and send it to sd, wipe data/factory reset and flash.
Click to expand...
Click to collapse
OK, when I go in ad recovery, I got no new menu. Only screen like this:
ANDROID LOAD RAW
[K]11808800:28BC18 *****************
Load done!
123456
GO GO GO!
And nothing more...
And when you say flash new rom, for the TyphoonN_CM7_v2.7.4, do you mean copy those to files to root of SD, and then boot from SD?
Only ROM I can flash via USB flasher mode is a DFT LEO NAND Android. And If I do that, it freezes at the DFT-logo...
abbamust said:
OK, when I go in ad recovery, I got no new menu. Only screen like this:
ANDROID LOAD RAW
[K]11808800:28BC18 *****************
Load done!
123456
GO GO GO!
And nothing more...
And when you say flash new rom, for the TyphoonN_CM7_v2.7.4, do you mean copy those to files to root of SD, and then boot from SD?
Only ROM I can flash via USB flasher mode is a DFT LEO NAND Android. And If I do that, it freezes at the DFT-logo...
Click to expand...
Click to collapse
you must put your rom.zip to sd root, not unzipped files. but that doesn't work if you cannot go to ad recovery menu.
as a last chance can you format your sd card using panasonic sd formatter,then flash recovery partition, then see if recovery menu comes.
mutil said:
you must put your rom.zip to sd root, not unzipped files. but that doesn't work if you cannot go to ad recovery menu.
as a last chance can you format your sd card using panasonic sd formatter,then flash recovery partition, then see if recovery menu comes.
Click to expand...
Click to collapse
Did that now, formattet SD card with panasonic sd formatter, flashed the recovery you sent me, and then try to enter ad recovery. This shows up:
ANDROID LOAD RAW
[K]1180800:2B78E8 12800000:22FDEF 11800100
Load done!
123456
GO GO GO!
Nothing more!
abbamust said:
Did that now, formattet SD card with panasonic sd formatter, flashed the recovery you sent me, and then try to enter ad recovery. This shows up:
ANDROID LOAD RAW
[K]1180800:2B78E8 12800000:22FDEF 11800100
Load done!
123456
GO GO GO!
Nothing more!
Click to expand...
Click to collapse
i'll just get crazy.
now we'll try going to recovery by sd method. download the attached file, unrar it.put the extracted folder to sd card.
in mgldr go to services-boot settings-ad sd dir-find our folder in list and choose-you'll go to mgldr menu automatically.now choose 2nd choice ad sd.this must send you to recovery menu.then install your rom.zip following instructions in former posts.
So i bought my first HD2 (EU version) from ebay a week ago and i've been trying to install custom roms since then.
I've been following the instructions from the NAND Toolkit thread but i could not install the ClockworkMod Recovery 5.0.2.6, because when the cmd command window appears it it stops at ( *daemon started successfully* ).
I have installed right now update recovery 3.0.0.5 which i found somewhere else but still not all roms work. The only rom that works is this: http://forum.xda-developers.com/showthread.php?t=1441462
Can someone help how to install ClockworkMod Recovery 5.0.2.6 manually or with some other way
HTC HD2
aMAGLDR V1.13
SPL - 2.08.HSPL
ClockworkMod Recovery 3.0.0.5
Install clockwork through magdlr... seems like your installing through fastboot.
Hope this helps.
Sent from my HTC HD2 using xda premium
Difference
What's the difference and how do i actually do that????
john_gr said:
What's the difference and how do i actually do that????
Click to expand...
Click to collapse
Just see this guide and download any of the recoveries at the bottom of the post. All you have to do is put your phone in USB Flasher, connect it to the PC and run the DAF.exe file within the selected CWM folder. If you want to change the recovery size, just open 'flash.cfg' (not flash.cfg.txt) with notepad or something similar (Windows has it preinstalled, dunno about other computers) and change the system partition value.
To be honest, I don't know how using the manual method would help over using the Toolkit, but the guide I linked worked perfectly for me, so try it out I guess
Try:
D. How do i install recovery / do a repartition on MAGLDR?
1) Choose MAGLDR Repartition on top.
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
E. How do i update recovery on MAGLDR?
1) Choose MAGLDR update recovery on top.
2) Press Update button on bottom left corner.
3) Follow instructions.
taken from here http://forum.xda-developers.com/showthread.php?t=1090783
repost
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
hi John_gr
maybe you can try this method?
http://forum.xda-developers.com/showthread.php?p=25322357#post25322357
after you repartition in magldr CWM will be installed then just go Magldr (phone booting) then select #8 AD Recovery
john_gr said:
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
Click to expand...
Click to collapse
2) Check in your rom tread what partitions are advised and then choose the correct sizes. Cashe size you can put 5 or 10 MB.
And then follow point 3 and 4
As for your second question probably it's becouse you didn't install recovery correct.
john_gr said:
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
Click to expand...
Click to collapse
Why would USB debugging matter? You use USB Flasher in MAGLDR to flash CWM
Hey,
I have an HD2 and I format my memory card (16GB) on FAT32 and I put ClockworkMod Recovery 1.2.7 (zImage...) on the root of the card and I go to AD Recovery and say "No boot sources"
Someone can help me?
Thanks!!
PS: I already install the HD2 Toolkit but when I go to USB Flasher my HD2 say Wait USB...USB and freeze!! :crying:
Ad recovery is to start nand recovery, you want to boot SD.
PS. Its not frozen, its waiting for you to tell the nand toolkit what you want to do.
You need initrd too.
Jakoozie said:
Hey,
I have an HD2 and I format my memory card (16GB) on FAT32 and I put ClockworkMod Recovery 1.2.7 (zImage...) on the root of the card and I go to AD Recovery and say "No boot sources"
Someone can help me?
Thanks!!
PS: I already install the HD2 Toolkit but when I go to USB Flasher my HD2 say Wait USB...USB and freeze!! :crying:
Click to expand...
Click to collapse
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse
I have used always Magloader via hd2 toolkit and it was sometimes confusing.
I can say the clk mode is better for me personal the beginning on to learn how to begin I have a link just look at it , I writed it down on a notepad.
Just have a look and maybe you will fine with that to it is spoken in German but if you have problems with that you can google further,Enjoy
http://www.youtube.com/watch?v=6WaweDagGlc
GhostScalper said:
I have used always Magloader via hd2 toolkit and it was sometimes confusing.
I can say the clk mode is better for me personal the beginning on to learn how to begin I have a link just look at it , I writed it down on a notepad.
Just have a look and maybe you will fine with that to it is spoken in German but if you have problems with that you can google further,Enjoy
http://www.youtube.com/watch?v=6WaweDagGlc
Click to expand...
Click to collapse
You are telling ME to use cLK. I dont have a problem with MAGLDR.
I think you got the wrong person. LOL
adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse
If I do this will my existing HD2O WPH 7.8 installation get messed?
I just want to try an Android ROM from another SD card (not the one that works with HD2O's ROM.)
Partitioning will remove wp7.
Get an SD android rom, put on SD card, into mgldr, set SD source to the folder you put the rom in, , choose boot ad SD
Thank you
Works as described!
adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse