Database Users

[Q] How to get into clwmod recovery after flashing?

Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?

emilianos said:
Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?
Click to expand...
Click to collapse
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load

simpler answer is to press the power on button and hold it pressed until you are in magldr menu. there you can select ad recovery
yaely_ole said:
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load
Click to expand...
Click to collapse

If you're using cLk, hold the home button.

How to Bypass cLK Fastboot screen!

I noticed many of you including myself, while trying to install cLK using RUU in order to run NAND get stuck at the Fast boot screen (forgot to update the kernel).
At that stage the SD card seems inaccessible and your phone won't respond to hard resetting. Well I found the solution to restore your phone back to normal!!
Suggest you grab ksubedi's HD2 tool and (assuming you already have HSPL installed)
1. Power off the phone (pull the battery if required)
2. Hold on the Vol Down key, press power
3. Connect to the computer, on the red-blue-green-white screen, wait for Serial to change to USB (if not install WMDC)
4. Run the HD2 toolkit, choose Task29 (this will wipe your phone out)
5. When the phone reboots, hold down the vol again to get back to the red-blue-green-white screen, ensure you see USB
6. Choose cLK Repartition, choose the right partition sizes (150 MB with 5 MB cache works for most non-sense ROMs), hit "Repartition"
7. When the phone reboots, press the Back button on the phone, wait till you get the Fast Boot processing commands screen (If you dont get this, you need to install the ADB drivers)
8. Choose cLK Install Recovery, hit "Install", press "Yes", follow instructions
Now download one of Energy Roms (which I prefer)
http://nrgz28.sylvester20007.com/Leo/Cookie/index.php
9. Extract the rom on your desktop
10. Open up your HD2 toolkit again
11. In the bottom of it, Click browse and select the NBH file on your desktop
12. Reboots, hold down the vol again to get back to the red-blue-green-white screen, ensure you see USB
13. Then Click install RUU on the HD2 toolkit to flash the new rom
Enjoy! and Thanks to ph03n!x

Thank me why, am just about to post something to contribute here
If you have the Android SDK's ADB/ Fastboot, and are stuck in the cLK Fast Boot screen, you can issue "fastboot reboot" from the folder where you have extracted fastboot.exe to reboot the phone, of course with the phone connected. This saves you from opening the battery cover to reboot.
And if you are in the fast boot screen already, dont bother doing a Task 29 again. Just open ksubedi's HD2 toolkit and install cLK recovery.
Finally, after installing recovery, hold down the Home key when the phone reboots - this will take you to recovery. In recovery, choose mounts and storage > mount USB to get access to the phone's SD Card (when plugged in to the computer, of course!). Copy your favorite .zip ROM to the SD Card, and flash it through "Install zip from SD Card" > Choose Zip.

HTC HD2 custom rom freezing in bootup

Hi
I have a HTC HD2 bought in Norway.
I want to run Android on this instead of WPH.
What I have done is:
1: Installed MAGLDR 1.13
2: I used HSPL4 and installed HSPL2.08
3: I have the radio versjon 2.15.50.14.
4: I booted up in MAGLDR, and flashed the ROM via menu 5, Flash via USB.
5: I have downloaded the DFT_LEO_NAND_Android, and ran the DAF-tool.
Everything looks good, but when it is finished, the phone restarts, and boots up in nand, 1 2 3 4 5 6, GO, GO, GO, the Android logo shows, and nothing more!
This also happens if I try to boot up from SD-card with an Android folder with a custom ROM, its freezing on the green HTC-logo aften MAGLDR boot.
I have deleted my WPH image, so I cant boot up in windows anymore.
I have tryed to hard-reset the phone (hold down volume up and down + power + reset).
I have NEVER come it to bootloader with green, red, brue and white screen during bootup. Only time I got this, was when I ran the ROMUpdateUtility in windows when the phone still ran WPH. This I can not do anymore due that I cant boot Windows anymore.
Can I flash any WPH ROM i MAGLDR?
Should I install ClockworkRecovery? How?
Can someone please help! Thanks.

abbamust said:
Hi
I have a HTC HD2 bought in Norway.
I want to run Android on this instead of WPH.
What I have done is:
1: Installed MAGLDR 1.13
2: I used HSPL4 and installed HSPL2.08
3: I have the radio versjon 2.15.50.14.
4: I booted up in MAGLDR, and flashed the ROM via menu 5, Flash via USB.
5: I have downloaded the DFT_LEO_NAND_Android, and ran the DAF-tool.
Everything looks good, but when it is finished, the phone restarts, and boots up in nand, 1 2 3 4 5 6, GO, GO, GO, the Android logo shows, and nothing more!
This also happens if I try to boot up from SD-card with an Android folder with a custom ROM, its freezing on the green HTC-logo aften MAGLDR boot.
I have deleted my WPH image, so I cant boot up in windows anymore.
I have tryed to hard-reset the phone (hold down volume up and down + power + reset).
I have NEVER come it to bootloader with green, red, brue and white screen during bootup. Only time I got this, was when I ran the ROMUpdateUtility in windows when the phone still ran WPH. This I can not do anymore due that I cant boot Windows anymore.
Can I flash any WPH ROM i MAGLDR?
Should I install ClockworkRecovery? How?
Can someone please help! Thanks.
Click to expand...
Click to collapse
download and install this tool to pc.
http://forum.xda-developers.com/showthread.php?t=1090783
1)go to android nand thread and find a rom to your pleasure
2)in op of rom find which nand partition you need
3)using tool arrange and apply this nand partition in usb flasher mode (e.g. if it says 5-180-5 you'll choose custom at left column and 5 as cache,then click repartition and write 180 in the coming window.)
4)if your hd2 is eu,then make an ext partition. in mgldr:ad recovery-advanced-partition sd card-choose 1024-choose 0.(this procedure will wipe everything in sd)
5)put your rom.zip file to sd: in mgldr:ad recovery-monts and storage-mount usb storage-send your file to sd
6)now press back button-select install zip from sd-choose zip rom sd-find your rom.zip.
7)after installation is complete reboot.

Thanks, but where can I find which nand partition I need?
Ex, MDJ_Gingerbread or, JDMS, DTF_LEO_NAND

abbamust said:
Thanks, but where can I find which nand partition I need?
Ex, MDJ_Gingerbread or, JDMS, DTF_LEO_NAND
Click to expand...
Click to collapse
can you give the link of the rom you want to use?

I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/

abbamust said:
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
Click to expand...
Click to collapse
To flash clockworkmod, you use USB Flasher mode (in Magldr). To enter clockworkmod recovery afterwards, you go to 8. AD Recovery. Going to boot AD will not go into the recovery.

abbamust said:
I tried the HD2 toolkit, but I did not know what sizs to choose, but I just tried 150 with 5 in cache.
Then entered magldr, and when I coosed AD recovery, the phone hangs. No menu.
I also tried to install Clockworkmod Recovery, and I never got the menu for Clockwork. Enters magldr, and when I press Boot AD to enter Clockwork, it hangs again. 123456 GO GO GO, and nothing...
http://www.jayceooi.com/2011/01/03/download-jdms-ultimate-nand-android-rom-for-htc-hd2/
http://forum.xda-developers.com/showthread.php?t=893620
http://www.addictivetips.com/mobile/install-gingerbread-based-typhoon-cyanogenmod-7-rom-on-htc-hd2/
Click to expand...
Click to collapse
i used the third rom (typhoon's) before. it needs 150-5 partition. the other two are very old roms. so using nand tool,make 150-5 partition in mgldr usb flasher mode.then try going to ad recovery again.it should work.

Nigeldg said:
To flash clockworkmod, you use USB Flasher mode (in Magldr). To enter clockworkmod recovery afterwards, you go to 8. AD Recovery. Going to boot AD will not go into the recovery.
Click to expand...
Click to collapse
Sorry, I ment AD Recovery, and the phone goes not i Cloclwork recovery anyway...

mutil said:
i used the third rom (typhoon's) before. it needs 150-5 partition. the other two are very old roms. so using nand tool,make 150-5 partition in mgldr usb flasher mode.then try going to ad recovery again.it should work.
Click to expand...
Click to collapse
This is what happens when I try to enter ad recovery.

This is what happen when I try to load AD from SD.
Here it just freezes.

abbamust said:
This is what happens when I try to enter ad recovery.
Click to expand...
Click to collapse
this screen is normal, but it must go further after this screen. what i say, if you apply nand partition again this problem may be solved.because it will give you a new ad recovery.if it doesnt work we can try a different recovery.

mutil said:
this screen is normal, but it must go further after this screen. what i say, if you apply nand partition again this problem may be solved.because it will give you a new ad recovery.if it doesnt work we can try a different recovery.
Click to expand...
Click to collapse
I use the Recovery_150M now, and till just hangs when I enter ad recovery.
Witch else can I use?

abbamust said:
I use the Recovery_150M now, and till just hangs when I enter ad recovery.
Witch else can I use?
Click to expand...
Click to collapse
http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13142666346961
download and unrar this.connect your phone to pc. in mgldr choose 'usb flasher'. see usb flasher...usb in phone screen.-in unrared folder right click on daf.exe-run as administrator.then install your rom.zip from sd.

mutil said:
http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13142666346961
download and unrar this.connect your phone to pc. in mgldr choose 'usb flasher'. see usb flasher...usb in phone screen.-in unrared folder right click on daf.exe-run as administrator.then install your rom.zip from sd.
Click to expand...
Click to collapse
Thank you for trying to help me.
The new recovery got flashed nice, but at bootup on SD-card witch I put the Typhoon CM7 android, it freezes at bootup. 123456 GO GO GO. and then android picture, nothing more. I have waited for maybe 1 hour for the installation.
Is my phone briked now?

one little ting.
seems like i have aMAGLDR v1.13.

abbamust said:
Thank you for trying to help me.
The new recovery got flashed nice, but at bootup on SD-card witch I put the Typhoon CM7 android, it freezes at bootup. 123456 GO GO GO. and then android picture, nothing more. I have waited for maybe 1 hour for the installation.
Is my phone briked now?
Click to expand...
Click to collapse
i dont think so. now in ad recovery wipe data/factory reset then try flashing the rom again.if it doesnt work download a new copy of rom and send it to sd, wipe data/factory reset and flash.

mutil said:
i dont think so. now in ad recovery wipe data/factory reset then try flashing the rom again.if it doesnt work download a new copy of rom and send it to sd, wipe data/factory reset and flash.
Click to expand...
Click to collapse
OK, when I go in ad recovery, I got no new menu. Only screen like this:
ANDROID LOAD RAW
[K]11808800:28BC18 *****************
Load done!
123456
GO GO GO!
And nothing more...
And when you say flash new rom, for the TyphoonN_CM7_v2.7.4, do you mean copy those to files to root of SD, and then boot from SD?
Only ROM I can flash via USB flasher mode is a DFT LEO NAND Android. And If I do that, it freezes at the DFT-logo...

abbamust said:
OK, when I go in ad recovery, I got no new menu. Only screen like this:
ANDROID LOAD RAW
[K]11808800:28BC18 *****************
Load done!
123456
GO GO GO!
And nothing more...
And when you say flash new rom, for the TyphoonN_CM7_v2.7.4, do you mean copy those to files to root of SD, and then boot from SD?
Only ROM I can flash via USB flasher mode is a DFT LEO NAND Android. And If I do that, it freezes at the DFT-logo...
Click to expand...
Click to collapse
you must put your rom.zip to sd root, not unzipped files. but that doesn't work if you cannot go to ad recovery menu.
as a last chance can you format your sd card using panasonic sd formatter,then flash recovery partition, then see if recovery menu comes.

mutil said:
you must put your rom.zip to sd root, not unzipped files. but that doesn't work if you cannot go to ad recovery menu.
as a last chance can you format your sd card using panasonic sd formatter,then flash recovery partition, then see if recovery menu comes.
Click to expand...
Click to collapse
Did that now, formattet SD card with panasonic sd formatter, flashed the recovery you sent me, and then try to enter ad recovery. This shows up:
ANDROID LOAD RAW
[K]1180800:2B78E8 12800000:22FDEF 11800100
Load done!
123456
GO GO GO!
Nothing more!

abbamust said:
Did that now, formattet SD card with panasonic sd formatter, flashed the recovery you sent me, and then try to enter ad recovery. This shows up:
ANDROID LOAD RAW
[K]1180800:2B78E8 12800000:22FDEF 11800100
Load done!
123456
GO GO GO!
Nothing more!
Click to expand...
Click to collapse
i'll just get crazy.
now we'll try going to recovery by sd method. download the attached file, unrar it.put the extracted folder to sd card.
in mgldr go to services-boot settings-ad sd dir-find our folder in list and choose-you'll go to mgldr menu automatically.now choose 2nd choice ad sd.this must send you to recovery menu.then install your rom.zip following instructions in former posts.

[HD2 not booting] Freezed and stopped on MAGLDR mode

Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha

Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.

Harshadura, I am the guy who wrote that tutorial. You haven't bricked your phone (yet) so you should be okay. Just follow Erroneous91's advice, step by step and you should be have your phone running again.
I no longer own an HD2, I've switched to the Galaxy Note, so I won't be able to walk you through this one. There are still a ton of great people (like Erroneous91 :-D) who can help though.
Good luck!

Erroneous91 said:
Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.
Click to expand...
Click to collapse
hi Erroneous91, Thanks for the Reply.
When I install Radio Leo 2.15.50.14 it stops at 96%
I tried several times, but it stops at same position. [Screenshot attached]
I tried in both ways SD card method and USB method.
Tried doing after completing Task29, but no luck
HSPL 2.08 has installed properly
and I am not able to follow rest of the tasks cause of this Radio issue.
Please help.
Thanks

Sounds like a stuck Radio the only thing I know to tell you to do is to start downloading all the stock ROMs you can find. Then try flashing them one by one. Try flashing them both by RUU and by SD card. Also start with the older ROMs and work your way to the newer ROMs. Just remember though ifyou have a T-Mobile US (TMOUS) HD2 you can not flash a radio with a 51 in it or a radio below 2.07.50.?? or you will hard radio brick the device. Maybe you will get lucky and find a ROM that will flash. Remember though that if you flash via SD card even though the flash may not complete it may have still overwritten your HSPL so check it after every flash attempt.
Edit: I just looked at the attached pictures in the OP. You problem is not a stuck radio it is your device I'D has gotten changed some how, look at the top line of the bootloader it is not correct.You can still follow my suggestion from above or you can also maybe try using the device I talk about in this post here.
Also at Erroneous91, you should have HSPL as step number one because without HSPL you can not even run a task 29. Now I know you just wanted to make sure that the OP had the correct HSPL to use MAGLDR but without HSPL you can only flash the correct stock ROMs for the HD2 so HSPL should always be the first thing to flash. Plus please refrain from telling someone that has a out of the ordinary issue with flashing or booting things correctly to use task 29. This wipes whatever usable software that is on the device off and may leave them with a device they can not get software back on to like the OP is now.

Hello again,
firstly I'm gonna ask you has your HD2 hanged before by overheating, like when running Android/WP7 or similar things?
If not, this should be the final solution, follow this easy quick guide:
1. Download the attachment from udK from here: LINK IN YOUR INBOX
2. Extract in whatever folder you like
3. Download the RADIO 2.15.50.14 from here LINK IN YOUR INBOX
4. Extract the the .nbh to the folder you extracted the the Leo_CustomRUU from step 2. and rename it to RUU_Signed.nbh
5. You should now have 2 files in one folder: 1. CustomRUU.exe 2. RUU_Signed.nbh
6. Power on your HD2, enter bootloader by holding volume down key, connect USB to computer, run CustomRUU.exe and follow, it's like flashing HSPL, but instead your flashing the RADIO.
If you had the HD2 hanging before because of overheating, it's possible that on 96% it's processing too much data that it overheats again and just hangs.
Otherwise try this solution, it's basically an alternate way to install the RADIO.

Hi Erroneous91, T-Macgnolia,
Thanks lot for the replies.
Sadly! after couple of ROM updates via SD card and via USB, now HD2 doesn't even load into Bootloader mode (Tri-color).
when I insert the battery and push the power button It nonstoply vibrates, need to remove the battery to stop the vibration.
pretty sad seen, I have no idea what to do now, kinda hard brick I guess, need to find a repairman to fix the issue.
Anyway thanks lot again for your great support.

Sad...
Sadly, this really sounds like the processor overheat problem, which I had, I bought a HD2 that had the processor overheating problem earlier for parts.
What it does, it just restarts on a certain point and then just keeps vibrating, cuz it can't even pass the logo screen from restarting itself infinite times.
If yours is overheating, you can test out this by trying to chill it down(people tried by putting the HD2 in the actual freezer :laugh:, but only for a few minutes, just to make it a bit lower of the normal temp.) and trying to turn it on to see will it pass to bootloader, I'm kinda 90% sure that this is the problem now.
P.S.: if it boots normally after chilling it down in the freezer, prepare your RUU program with the renamed RADIO in the same folder, launch bootloader, connect USB, launch RUU program fast, next, next and try to make it finish the Radio installation. Also don't hold the phone in your hands, that would surely heat it up quite a bit.
I wish you good luck with the phone!

how can solve this problem plz i want solution
how can solve this problem plz i want solution
harshadura said:
Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha
Click to expand...
Click to collapse

I suggest to flash it back to Windows 6.5 and after that to start all over.
Here's a walkthrough
NEEDED TOOLS:
- HSPL4 by cotulla and bepe from: forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028 ..
- Radio 2.15.50.14 from: http://www.hotfile.com/dl/136377459/0998e73/Radio-Leo-2.15.50.14.rar.html?lang=tr
- Advanced ROM Update Utility by Barin from: forum.xda-developers.com/attachment.php?attachmentid=492295&d=1295291861
- aMagldr 1.13 by Cotulla from http://forum.xda-developers.com/showthread.php?t=893618
- aMagldr 1.13.06 by Cotulla but modified by symbuzzer from: http://androidforum.tytung.com/new-2-08-hspl-with-gez-exploit-t127.html
- Black LK by Kokotas from: http://www.mediafire.com/?tzg7whl9wwaih
- DFT DAF (DFT Android Flasher) by bepe and cotulla from: forum.xda-developers.com/attachment.php?attachmentid=552314&d=1301130234
- Extented TWRP Recovery by Kokotas (recommended) from: http://forum.xda-developers.com/showthread.php?t=2120297
- 4EXT Recovery (SD Version) by Xylograph from: https://goo.im/devs/Xylograph/Various/Recoveries/SD/recovery_4EXT2.2.7_leo_sd.zip/
- Custom Image Update Utility for cLK by Kokotas from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- Fastboot Drivers by shimp208 from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- sboot & tboot flashers by bojanbl from: http://forum.xda-developers.com/showpost.php?p=31256707&postcount=967
1. HSPL INSTALLATION:
a) Download WinCE drivers from Needed Tools section and install it to PC.
b) Download HSPL4 from Needed Tools section and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Connect HD2 to PC via USB cable and Run HSPL.exe
e) Select 2.08.HSPL for aMagldr bootloader, 3.03.HSPL for Black LK bootloader
2. RADIO INSTALLATION:
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Download Advanced Rom Update Utility from Needed Tools and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select CustomRUU (Task32) and Radio 2.15.50.14.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Rename Radio 2.15.50.14.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
3. BOOTLOADER INSTALLATION:
a) You need to select a bootloader in this step. There are two alternatives; aMagldr and Black LK. For differences between them, please read this: http://forum.xda-developers.com/showpos ... ostcount=1 There is a third alternative too. It is HaRET. For detailed info about it, please look 5th post.
b) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract *.nbh formatted file on PC's desktop. Use TWRP attached and lastest version of Black LK.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select RegularRUU (Task28) and *.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract nbh formatted file on PC's desktop. Note: Use TWRP attached and lastest version of Black LK.
b) Rename *.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
4. AMAGLDR NAND PARTITIONING AND RECOVERY INSTALLATION:
a) Download DFT DAF (DFT Android Flasher) from Needed Tools section and extract Recovery_250 folder on your desktop.
b) In Recovery_250 folder; open flash.cfg file via a text editor, for example Notepad.
c) You must to change system ya 250M value with needed system value by target rom. For example Tytung's NexusHD2 ICS 4.0.4 CM9 3.0b rom needs 170M system partition. I recommend to change this value like "system size + 10M, so for Tytung's ICS rom use "180M" If you want to use NativeSD or DataOnExt methods, you need a ext4 partition. For detailed information about partitioning sd car, please look 5th post.
d) Edit cache ya 10M to cache ya 2M and recovery rrecov|ro|nospr 5M cwm_recovery_leo.img to recovery rrecov|ro|nospr filesize cwm_recovery_leo.img and save flash.cfg file.
e) Download Extented TWRP Recovery and extract *.img file in Desktop\Recovery_250\ folder. You can use another recoveries too.
f) Delete recovery-raw.img file from Recovery_250 folder and rename extracted *.img file to cwm_recovery_leo.img
g) Power on HD2. In aMagldr menu, select USB Flasher option with volume up, volume down and green (answer) keys.
h) Connect HD2 to PC and run DAF.exe from Recovery_250 folder and continue installation.
5. ANDROID ROM INSTALLATION:
a) Download rom's flashable zip file from our site or XDA.
b) Copy zip file to SD card via a sd adaptor or USB MassStg option in aMagldr or Mount USB option in Extented TWRP.
c) !!! Don't forget to edit system size !!! & !!! Don't forget to create ext4 partition for dataonext and nativesd methods!!!
d) Reboot HD2 in Recovery Mode:
* For aMagldr users, hold Power button when HD2 is starting. And select AD Recovery option.
* For Black LK users, hold Home button when HD2 is starting.
e) In Recovery, select Install option and select roms flashable zip.
f) If your rom supports aroma installer, you should see some options like installation methods (Nand, DataOnExt and NativeSD) and connection method (rmnet, ppp)
6. CREATING EXT4 PARTITION FOR NATIVESD & DATAONEXT METHODS:
Note: You can do that on your device via ExTWRP and 4ext recoveries. There are several PC tools too.
Note 2: This operation will format your SD card. Please back up firstly.
-For ExTWRP:
1) Reboot into recovery and go Advanced>Partition SD Card menu.
2) Select EXT4 and set its size. (I recommend minimal 1024MB)
3) And swipe Swipe to Partition.
-For 4ext Recovery:
1) Reboot into recovery and go advanced>Partition SD Card menu.
2) Select Remove all partitİons ... from options.
3) For 1st sd-ext part; select size. (I recommend minimal 1024MB)
4) For 2sd sd-ext part; select skip.
5) For swap partition; select skip.
6) You can convert its type to ext3<=>ext4 from EXT3 - 4EXT - EXT4 menu.

No boot sources

Hey,
I have an HD2 and I format my memory card (16GB) on FAT32 and I put ClockworkMod Recovery 1.2.7 (zImage...) on the root of the card and I go to AD Recovery and say "No boot sources"
Someone can help me?
Thanks!!
PS: I already install the HD2 Toolkit but when I go to USB Flasher my HD2 say Wait USB...USB and freeze!! :crying:

Ad recovery is to start nand recovery, you want to boot SD.
PS. Its not frozen, its waiting for you to tell the nand toolkit what you want to do.

You need initrd too.

Jakoozie said:
Hey,
I have an HD2 and I format my memory card (16GB) on FAT32 and I put ClockworkMod Recovery 1.2.7 (zImage...) on the root of the card and I go to AD Recovery and say "No boot sources"
Someone can help me?
Thanks!!
PS: I already install the HD2 Toolkit but when I go to USB Flasher my HD2 say Wait USB...USB and freeze!! :crying:
Click to expand...
Click to collapse
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy

adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse
I have used always Magloader via hd2 toolkit and it was sometimes confusing.
I can say the clk mode is better for me personal the beginning on to learn how to begin I have a link just look at it , I writed it down on a notepad.
Just have a look and maybe you will fine with that to it is spoken in German but if you have problems with that you can google further,Enjoy
http://www.youtube.com/watch?v=6WaweDagGlc

GhostScalper said:
I have used always Magloader via hd2 toolkit and it was sometimes confusing.
I can say the clk mode is better for me personal the beginning on to learn how to begin I have a link just look at it , I writed it down on a notepad.
Just have a look and maybe you will fine with that to it is spoken in German but if you have problems with that you can google further,Enjoy
http://www.youtube.com/watch?v=6WaweDagGlc
Click to expand...
Click to collapse
You are telling ME to use cLK. I dont have a problem with MAGLDR.
I think you got the wrong person. LOL

adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse
If I do this will my existing HD2O WPH 7.8 installation get messed?
I just want to try an Android ROM from another SD card (not the one that works with HD2O's ROM.)

Partitioning will remove wp7.
Get an SD android rom, put on SD card, into mgldr, set SD source to the folder you put the rom in, , choose boot ad SD

Thank you
Works as described!
adil1508 said:
Oh man. If you find the toolkit too confusing, dont use it.
Download CWM partitions from here
http://forum.xda-developers.com/showthread.php?t=898913
To install CWM
1. Boot into MAGLDR(turn on phone while holding down the power button)
2. Select option 5. USB flasher
3. Connect Your phone to the pc by USB cable
4. When it says on the bottom line. USB.....USB. Then youre ready
5. Run DAF.exe from the downloaded files
6. VOILA! Its done
Yes its that easy
Click to expand...
Click to collapse