Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?
emilianos said:
Just flashed clockwork mod on rooted hd2 and would like some help on how to get into recovery with hard buttons, and not thru rom manager?
Click to expand...
Click to collapse
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load
simpler answer is to press the power on button and hold it pressed until you are in magldr menu. there you can select ad recovery
yaely_ole said:
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load
Click to expand...
Click to collapse
If you're using cLk, hold the home button.
I wanted to flash my HD2 with android to NAND but checked my bootloader and it was SPL3.03.
So do I need to downgrade somehow and if so how?
or what are the other options thanks.
Bootloader - Hspl4 - 2.08.hspl
done.
thanks for the reply just tried that and it says critical error.
Its very sipmle.
1. shutdown phone.
2. Power on and hold volumedown button (you see 4 color loader)
3. plugin usb cable to computer and wait for install driver
4. run hspl4
5. chose SPL 2.08.HSPL from list and next you see information about hd2 hack and restart phone when finish
6. task29
7. install MAGLDR113_DAF
8. make task from your prefered rom
I suggest use http://forum.xda-developers.com/showthread.php?t=1166948
For me is the best now
GL
download hd2 toolkit from the forums. install HardSPL, select 2.08 and it should unlock your phone. then install MAGLDR, proper rom partition and then choose preferred rom and install on sd card. go into ad recovery after rebooting phone by holding down end button and install rom
download hd2 toolkit from the forums. install HardSPL, select 2.08 and it should unlock your phone. then install MAGLDR, proper rom partition and then choose preferred rom and install on sd card. go into ad recovery after rebooting phone by holding down end button and install rom
Can't enter CWM Recovery :C
my stock radio 2.15.50.14
and SPL -2.08.0000 already flash to HSPL 2.08
i already do this: (from stock WM 6.5 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 say 'USB'
-run DAF.exe for installing MAGLDR 1.13
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 say'USB'
-get into my recovery folder
-run daf.exe
-reboot completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-stuck at go go go screen
then i try cLK method and stuck at fastboot screen
faizul_emizal said:
Can't enter CWM Recovery :C
my stock radio 2.15.50.14
and SPL -2.08.0000 already flash to HSPL 2.08
i already do this: (from stock WM 6.5 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 say 'USB'
-run DAF.exe for installing MAGLDR 1.13
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 say'USB'
-get into my recovery folder
-run daf.exe
-reboot completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-stuck at go go go screen
then i try cLK method and stuck at fastboot screen
Click to expand...
Click to collapse
do task29 > install radio > mag > usbflasher > recovery daf.exe...ad revovery should work
Witch radio? My radio already 2.15.50.14
Sent from my HTC Wildfire using Tapatalk
I've written a guide for this if your interested in it??
Sent from my HD2 using xda premium
spl -2.08.0000 already.
Click to expand...
Click to collapse
That's not hspl, that's stock. Last 4 digits should be "hspl" ,, "2.08.hspl". Any that end 0000 are stock spls.
Run hspl again and take note of the dropdown list.
samsamuel said:
That's not hspl, that's stock. Last 4 digits should be "hspl" ,, "2.08.hspl". Any that end 0000 are stock spls.
Run hspl again and take note of the dropdown list.
Click to expand...
Click to collapse
i already flash 2.08.hspl
that's why i can flash magldr and cwm recovery
try this:
Your own description,but run RomUpdateUtility.exe for installing MAGLDR.
succesfull flash clk 1.5.0.0
but when to enter recovery got this line
cmdline: no_console_suspend=1 wire.search_count=5 clk=1.5.0.0
but recovery never show
faizul_emizal said:
succesfull flash clk 1.5.0.0
but when to enter recovery got this line
cmdline: no_console_suspend=1 wire.search_count=5 clk=1.5.0.0
but recovery never show
Click to expand...
Click to collapse
Are you holding back button (cLK) or home button (CWR) when power on?
i already try both..
faizul_emizal said:
i already try both..
Click to expand...
Click to collapse
And what happened?
Nothing happen.. and still stuck at go go go screen
Sent from my HTC Wildfire using Tapatalk
I already have an android nand on my phone, the Energy Sense 3.5 but I would like to install this one: http://forum.xda-developers.com/showthread.php?t=905060&highlight=nexushd
So can I skip the installation of the HSLP, Magloader, custom radio and just skip to the part where I flash the ROM? Also I would like to put my other 8GB SD card into my phone, so I should create an EXT partition of it, right?
Installation Guide for MAGLDR 1.13:
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Flash ClockworkMod Recovery
Download MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip (5.0 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.2.0.0 (recovery_3.2.0.0_leo.img).
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip (83.58 MB)
The ones who can read are clearly in advantage.
You dont need to install hspl or radio when you have it. But task 29 would be good, than magdlr cwm and rom
Thanks! So I should back up my ROM, install the NexusHD2 CWM, and then flash the nexushd2.zip .
Should work , but i have had a problem with bootloop by nexushd and i must'v installed windows 6.5 stock rom, than magdlr than cwm with new partition and than rom
WoW I have managed to install it in notime, thanks!
you can also skip the task 29 / magldr steps too, most times, unless you have an actual problem.
Enter cwm and do a 'wipe data/factory reset' after you back-up, and before you flash the new one, is usually good enough. It has the added benefit of also clearing the system folders on the EXT and FAT32 on the sd, since task 29 doesn't touch those. (you should do this step even if you do task29, unless you format both sd partitions, which is silly.)
Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha
Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.
Harshadura, I am the guy who wrote that tutorial. You haven't bricked your phone (yet) so you should be okay. Just follow Erroneous91's advice, step by step and you should be have your phone running again.
I no longer own an HD2, I've switched to the Galaxy Note, so I won't be able to walk you through this one. There are still a ton of great people (like Erroneous91 :-D) who can help though.
Good luck!
Erroneous91 said:
Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.
Click to expand...
Click to collapse
hi Erroneous91, Thanks for the Reply.
When I install Radio Leo 2.15.50.14 it stops at 96%
I tried several times, but it stops at same position. [Screenshot attached]
I tried in both ways SD card method and USB method.
Tried doing after completing Task29, but no luck
HSPL 2.08 has installed properly
and I am not able to follow rest of the tasks cause of this Radio issue.
Please help.
Thanks
Sounds like a stuck Radio the only thing I know to tell you to do is to start downloading all the stock ROMs you can find. Then try flashing them one by one. Try flashing them both by RUU and by SD card. Also start with the older ROMs and work your way to the newer ROMs. Just remember though ifyou have a T-Mobile US (TMOUS) HD2 you can not flash a radio with a 51 in it or a radio below 2.07.50.?? or you will hard radio brick the device. Maybe you will get lucky and find a ROM that will flash. Remember though that if you flash via SD card even though the flash may not complete it may have still overwritten your HSPL so check it after every flash attempt.
Edit: I just looked at the attached pictures in the OP. You problem is not a stuck radio it is your device I'D has gotten changed some how, look at the top line of the bootloader it is not correct.You can still follow my suggestion from above or you can also maybe try using the device I talk about in this post here.
Also at Erroneous91, you should have HSPL as step number one because without HSPL you can not even run a task 29. Now I know you just wanted to make sure that the OP had the correct HSPL to use MAGLDR but without HSPL you can only flash the correct stock ROMs for the HD2 so HSPL should always be the first thing to flash. Plus please refrain from telling someone that has a out of the ordinary issue with flashing or booting things correctly to use task 29. This wipes whatever usable software that is on the device off and may leave them with a device they can not get software back on to like the OP is now.
Hello again,
firstly I'm gonna ask you has your HD2 hanged before by overheating, like when running Android/WP7 or similar things?
If not, this should be the final solution, follow this easy quick guide:
1. Download the attachment from udK from here: LINK IN YOUR INBOX
2. Extract in whatever folder you like
3. Download the RADIO 2.15.50.14 from here LINK IN YOUR INBOX
4. Extract the the .nbh to the folder you extracted the the Leo_CustomRUU from step 2. and rename it to RUU_Signed.nbh
5. You should now have 2 files in one folder: 1. CustomRUU.exe 2. RUU_Signed.nbh
6. Power on your HD2, enter bootloader by holding volume down key, connect USB to computer, run CustomRUU.exe and follow, it's like flashing HSPL, but instead your flashing the RADIO.
If you had the HD2 hanging before because of overheating, it's possible that on 96% it's processing too much data that it overheats again and just hangs.
Otherwise try this solution, it's basically an alternate way to install the RADIO.
Hi Erroneous91, T-Macgnolia,
Thanks lot for the replies.
Sadly! after couple of ROM updates via SD card and via USB, now HD2 doesn't even load into Bootloader mode (Tri-color).
when I insert the battery and push the power button It nonstoply vibrates, need to remove the battery to stop the vibration.
pretty sad seen, I have no idea what to do now, kinda hard brick I guess, need to find a repairman to fix the issue.
Anyway thanks lot again for your great support.
Sad...
Sadly, this really sounds like the processor overheat problem, which I had, I bought a HD2 that had the processor overheating problem earlier for parts.
What it does, it just restarts on a certain point and then just keeps vibrating, cuz it can't even pass the logo screen from restarting itself infinite times.
If yours is overheating, you can test out this by trying to chill it down(people tried by putting the HD2 in the actual freezer :laugh:, but only for a few minutes, just to make it a bit lower of the normal temp.) and trying to turn it on to see will it pass to bootloader, I'm kinda 90% sure that this is the problem now.
P.S.: if it boots normally after chilling it down in the freezer, prepare your RUU program with the renamed RADIO in the same folder, launch bootloader, connect USB, launch RUU program fast, next, next and try to make it finish the Radio installation. Also don't hold the phone in your hands, that would surely heat it up quite a bit.
I wish you good luck with the phone!
how can solve this problem plz i want solution
how can solve this problem plz i want solution
harshadura said:
Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha
Click to expand...
Click to collapse
I suggest to flash it back to Windows 6.5 and after that to start all over.
Here's a walkthrough
NEEDED TOOLS:
- HSPL4 by cotulla and bepe from: forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028 ..
- Radio 2.15.50.14 from: http://www.hotfile.com/dl/136377459/0998e73/Radio-Leo-2.15.50.14.rar.html?lang=tr
- Advanced ROM Update Utility by Barin from: forum.xda-developers.com/attachment.php?attachmentid=492295&d=1295291861
- aMagldr 1.13 by Cotulla from http://forum.xda-developers.com/showthread.php?t=893618
- aMagldr 1.13.06 by Cotulla but modified by symbuzzer from: http://androidforum.tytung.com/new-2-08-hspl-with-gez-exploit-t127.html
- Black LK by Kokotas from: http://www.mediafire.com/?tzg7whl9wwaih
- DFT DAF (DFT Android Flasher) by bepe and cotulla from: forum.xda-developers.com/attachment.php?attachmentid=552314&d=1301130234
- Extented TWRP Recovery by Kokotas (recommended) from: http://forum.xda-developers.com/showthread.php?t=2120297
- 4EXT Recovery (SD Version) by Xylograph from: https://goo.im/devs/Xylograph/Various/Recoveries/SD/recovery_4EXT2.2.7_leo_sd.zip/
- Custom Image Update Utility for cLK by Kokotas from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- Fastboot Drivers by shimp208 from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- sboot & tboot flashers by bojanbl from: http://forum.xda-developers.com/showpost.php?p=31256707&postcount=967
1. HSPL INSTALLATION:
a) Download WinCE drivers from Needed Tools section and install it to PC.
b) Download HSPL4 from Needed Tools section and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Connect HD2 to PC via USB cable and Run HSPL.exe
e) Select 2.08.HSPL for aMagldr bootloader, 3.03.HSPL for Black LK bootloader
2. RADIO INSTALLATION:
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Download Advanced Rom Update Utility from Needed Tools and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select CustomRUU (Task32) and Radio 2.15.50.14.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Rename Radio 2.15.50.14.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
3. BOOTLOADER INSTALLATION:
a) You need to select a bootloader in this step. There are two alternatives; aMagldr and Black LK. For differences between them, please read this: http://forum.xda-developers.com/showpos ... ostcount=1 There is a third alternative too. It is HaRET. For detailed info about it, please look 5th post.
b) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract *.nbh formatted file on PC's desktop. Use TWRP attached and lastest version of Black LK.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select RegularRUU (Task28) and *.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract nbh formatted file on PC's desktop. Note: Use TWRP attached and lastest version of Black LK.
b) Rename *.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
4. AMAGLDR NAND PARTITIONING AND RECOVERY INSTALLATION:
a) Download DFT DAF (DFT Android Flasher) from Needed Tools section and extract Recovery_250 folder on your desktop.
b) In Recovery_250 folder; open flash.cfg file via a text editor, for example Notepad.
c) You must to change system ya 250M value with needed system value by target rom. For example Tytung's NexusHD2 ICS 4.0.4 CM9 3.0b rom needs 170M system partition. I recommend to change this value like "system size + 10M, so for Tytung's ICS rom use "180M" If you want to use NativeSD or DataOnExt methods, you need a ext4 partition. For detailed information about partitioning sd car, please look 5th post.
d) Edit cache ya 10M to cache ya 2M and recovery rrecov|ro|nospr 5M cwm_recovery_leo.img to recovery rrecov|ro|nospr filesize cwm_recovery_leo.img and save flash.cfg file.
e) Download Extented TWRP Recovery and extract *.img file in Desktop\Recovery_250\ folder. You can use another recoveries too.
f) Delete recovery-raw.img file from Recovery_250 folder and rename extracted *.img file to cwm_recovery_leo.img
g) Power on HD2. In aMagldr menu, select USB Flasher option with volume up, volume down and green (answer) keys.
h) Connect HD2 to PC and run DAF.exe from Recovery_250 folder and continue installation.
5. ANDROID ROM INSTALLATION:
a) Download rom's flashable zip file from our site or XDA.
b) Copy zip file to SD card via a sd adaptor or USB MassStg option in aMagldr or Mount USB option in Extented TWRP.
c) !!! Don't forget to edit system size !!! & !!! Don't forget to create ext4 partition for dataonext and nativesd methods!!!
d) Reboot HD2 in Recovery Mode:
* For aMagldr users, hold Power button when HD2 is starting. And select AD Recovery option.
* For Black LK users, hold Home button when HD2 is starting.
e) In Recovery, select Install option and select roms flashable zip.
f) If your rom supports aroma installer, you should see some options like installation methods (Nand, DataOnExt and NativeSD) and connection method (rmnet, ppp)
6. CREATING EXT4 PARTITION FOR NATIVESD & DATAONEXT METHODS:
Note: You can do that on your device via ExTWRP and 4ext recoveries. There are several PC tools too.
Note 2: This operation will format your SD card. Please back up firstly.
-For ExTWRP:
1) Reboot into recovery and go Advanced>Partition SD Card menu.
2) Select EXT4 and set its size. (I recommend minimal 1024MB)
3) And swipe Swipe to Partition.
-For 4ext Recovery:
1) Reboot into recovery and go advanced>Partition SD Card menu.
2) Select Remove all partitÄ°ons ... from options.
3) For 1st sd-ext part; select size. (I recommend minimal 1024MB)
4) For 2sd sd-ext part; select skip.
5) For swap partition; select skip.
6) You can convert its type to ext3<=>ext4 from EXT3 - 4EXT - EXT4 menu.