[Q] Help with flashing Android NAND - HD2 Android Q&A, Help & Troubleshooting and Genera

I wanted to flash my HD2 with android to NAND but checked my bootloader and it was SPL3.03.
So do I need to downgrade somehow and if so how?
or what are the other options thanks.

Bootloader - Hspl4 - 2.08.hspl
done.

thanks for the reply just tried that and it says critical error.

Its very sipmle.
1. shutdown phone.
2. Power on and hold volumedown button (you see 4 color loader)
3. plugin usb cable to computer and wait for install driver
4. run hspl4
5. chose SPL 2.08.HSPL from list and next you see information about hd2 hack and restart phone when finish
6. task29
7. install MAGLDR113_DAF
8. make task from your prefered rom
I suggest use http://forum.xda-developers.com/showthread.php?t=1166948
For me is the best now
GL

download hd2 toolkit from the forums. install HardSPL, select 2.08 and it should unlock your phone. then install MAGLDR, proper rom partition and then choose preferred rom and install on sd card. go into ad recovery after rebooting phone by holding down end button and install rom

download hd2 toolkit from the forums. install HardSPL, select 2.08 and it should unlock your phone. then install MAGLDR, proper rom partition and then choose preferred rom and install on sd card. go into ad recovery after rebooting phone by holding down end button and install rom

Related

Flashing MAGLDR

step-by-step
http://forum.xda-developers.com/showthread.php?t=893948
I can't flash MAGLDR113. 0%.
Right now i'm going to do task29 and flash RADIO 2.15.50.14 second time.
Next :
What version of rillphone.dll do i have to use for this RADIO ?
task29
Task 29 the same. 0%. My ROM : Duttys latest
EDIT : One question. HSPL 2.08.0000 or HSPL 2.08.HSPL ?
wrong place to post a question
take a look at the faq for troubleshooting:
http://forum.xda-developers.com/showpost.php?p=10206031&postcount=2
mskip said:
-----------------------------------------------------
When flashing MAGLDR the status remains at 0% for a long time, then gives a USB connection error
You need 2.08.HSPL installed in order to flash Magldr. Use HSPL3.exe and the Steps in *THIS* thread to do that.
-----------------------------------------------------
Click to expand...
Click to collapse
Help.
I can't flash anything. Task 29, latest HTC rom, radio ! Anything !
Please help !
EDIT : ERROR 262
BornToSowDeath said:
I can't flash anything. Task 29, latest HTC rom, radio ! Anything !
Please help !
EDIT : ERROR 262
Click to expand...
Click to collapse
its not too serious
steps to try:
-different usb port
or
-reinstalling ActiveSync
or
-if its still not working reboot your pc/laptop & start again.
Reboot done. Now Uninstalling ActiveSync and trying other USB port. Thanks.
Same as previous ones. 0%
the prev post was just to sort out the error,
as for the 0% its a known issue, follow the guides in the faq, everything you need is in there, (not to sound harsh) but no point really in typing it out again.
good luck
I really need to format my PC ;D Flashing task29 and RADIO done. ****ty programs (AtiTrayTools etc.) were the problems.
Error ;<
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
Error appears after/in point 3. (Installer is scanning for Leo). Help.
EDIT : Ok. I installed CleanDROID. Thanks.
BornToSowDeath said:
Error ;<
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
Error appears after/in point 3. (Installer is scanning for Leo). Help.
Click to expand...
Click to collapse
There are two things you need to learn on the internet:
Reading and Searching, no offense but you don't seem to be able to do either very well. Run the flasher under admin privileges
HSPL 2.08 is a must! then you should have a 576 MB ram radio. 2.08.50 will do it (task29).
then flash magldr. good to go

[Q] ss sd kernel open fail

I have a us T-Mobile htc hd2 which was running android nand sense and I had a touch screen issue. I found the fix to revert my phone back to factory, un-installing hspl back to spl. Sent the phone off to htc which they replaced the screen under the warranty. I got my phone back and tried to put the same programs and files I used in the beginning
I have spent hours reading and trying things suggested like using a radio file Radio_Leo_2.15.50.14, I have downgraded spl from my 2.10.000 to 2.08.000
When the phone reboots I get a message ss sd kernel open fail then MAGLDR Boot Menu Screen but am unable to load files with the usb
Any help?
imglknight said:
I have a us T-Mobile htc hd2 which was running android nand sense and I had a touch screen issue. I found the fix to revert my phone back to factory, un-installing hspl back to spl. Sent the phone off to htc which they replaced the screen under the warranty. I got my phone back and tried to put the same programs and files I used in the beginning
I have spent hours reading and trying things suggested like using a radio file Radio_Leo_2.15.50.14, I have downgraded spl from my 2.10.000 to 2.08.000
When the phone reboots I get a message ss sd kernel open fail then MAGLDR Boot Menu Screen but am unable to load files with the usb
Any help?
Click to expand...
Click to collapse
Hi,
Did you install HSPL 2.08HSPL?
THIS TOOL is very useful for everything you need...
yes I loaded hspl 208
I tried again and got the same error from MAGLDR113 sd kernl open fail and I tried to port DEFT Android again and got this error message
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
imglknight said:
yes I loaded hspl 208
I tried again and got the same error from MAGLDR113 sd kernl open fail and I tried to port DEFT Android again and got this error message
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Click to expand...
Click to collapse
Hi,
You need to start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
malybru said:
Hi,
You need to start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
I dont get it ....I have problems with this (when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache) I cant get there when i go to ad recovery it says "no boot sources " ...please help ...:-/
Im sitting with this phone already 3 days ...I start to hate it ....I had windows 6.5 then I put Android on but the problem was that i couldn't get right radio ...so I didnt had 3G/H ......does anybody know if there are some special link for HTC HD 2 Leo T-Mobile 1024....???step by step how to put on android with working i-net connection?????
Did you install Clockworkmod? Can be found here
renars.k said:
I dont get it ....I have problems with this (when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache) I cant get there when i go to ad recovery it says "no boot sources " ...please help ...:-/
Im sitting with this phone already 3 days ...I start to hate it ....I had windows 6.5 then I put Android on but the problem was that i couldn't get right radio ...so I didnt had 3G/H ......does anybody know if there are some special link for HTC HD 2 Leo T-Mobile 1024....???step by step how to put on android with working i-net connection?????
Click to expand...
Click to collapse
Hi,
Sorry,I've been really busy.
Try in the order of things...
1.use toolkit to install HSPL 2.08 HSPL
2.Task 29
3.Flash radio
4.install magldr and so on from there.
Then the rest is the same on the list.
Am I getting the error message “Error Description: USB init failed” because I don’t have a sd card in the phone? Is that where I am going wrong?
make sure that the files initrd and zimage are copied to the root of the sd card. do not copy the whole foler bec magldr will not be able to recognize it.

Please help ;( ;( ;(

Hi,
I tried today to flash android to my HTC HD2 but it went wrong
I flashed the radio 2.08 HSPL and the phone started oke to windows.
But when I updated the rom to install magldr it said that it was successful but the phone stuck in the white screen with green HTC logo and did not show magldr or any thing else just the htc screen
Please help me to repair it and flash android.
When I press volume down en power button I get the 4 colors screen. I get this text on it:
PB1100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
PLEASE HELP ME
Use task29 to remove windows first
than flash your phone with HSPL4 to 2.08.HSPL
than update your radio to 2.15.50.14
install magldr1.13
Restart the phone go to USB massSTG
plug your phone to the pc.
Copy the rom.zip to the phone.
Go back to home page
Go to USB flasher and install from your pc CWM daf.exe.
Phone starts automaticly.
Go to AD recovery, install zip from SD, choose zip from SD, choose your rom choose YES when finished go back and reboot system now.
It should to be work
Good Luck
and for future reference please post in the correct section, Q&A NOT the dev section
Please check my signature and follow the details instruction. mskip wrote it very clear. if you still have problem please let me know,,,
stuiterbal187 said:
Use task29 to remove windows first
than flash your phone with HSPL4 to 2.08.HSPL
than update your radio to 2.15.50.14
install magldr1.13
Restart the phone go to USB massSTG
plug your phone to the pc.
Copy the rom.zip to the phone.
Go back to home page
Go to USB flasher and install from your pc CWM daf.exe.
Phone starts automaticly.
Go to AD recovery, install zip from SD, choose zip from SD, choose your rom choose YES when finished go back and reboot system now.
It should to be work
Good Luck
Click to expand...
Click to collapse
I did everything except updating the radio to 2.15.50.14... How can I do that?
Thnx
I flashed the radio to 2.15.50.14 I found here: http://forum.xda-developers.com/showthread.php?t=611787
I installed the recovery and it's working BUT it does not install ROMs The error is: Can't open the ROM
How can I solve this again
SOLVED. Look here: http://forum.xda-developers.com/showthread.php?p=16785804#post16785804

Can I skip these steps?

I already have an android nand on my phone, the Energy Sense 3.5 but I would like to install this one: http://forum.xda-developers.com/showthread.php?t=905060&highlight=nexushd
So can I skip the installation of the HSLP, Magloader, custom radio and just skip to the part where I flash the ROM? Also I would like to put my other 8GB SD card into my phone, so I should create an EXT partition of it, right?
Installation Guide for MAGLDR 1.13:
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Flash ClockworkMod Recovery
Download MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip (5.0 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.2.0.0 (recovery_3.2.0.0_leo.img).
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip (83.58 MB)
The ones who can read are clearly in advantage.
You dont need to install hspl or radio when you have it. But task 29 would be good, than magdlr cwm and rom
Thanks! So I should back up my ROM, install the NexusHD2 CWM, and then flash the nexushd2.zip .
Should work , but i have had a problem with bootloop by nexushd and i must'v installed windows 6.5 stock rom, than magdlr than cwm with new partition and than rom
WoW I have managed to install it in notime, thanks!
you can also skip the task 29 / magldr steps too, most times, unless you have an actual problem.
Enter cwm and do a 'wipe data/factory reset' after you back-up, and before you flash the new one, is usually good enough. It has the added benefit of also clearing the system folders on the EXT and FAT32 on the sd, since task 29 doesn't touch those. (you should do this step even if you do task29, unless you format both sd partitions, which is silly.)

[HD2 not booting] Freezed and stopped on MAGLDR mode

Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha
Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.
Harshadura, I am the guy who wrote that tutorial. You haven't bricked your phone (yet) so you should be okay. Just follow Erroneous91's advice, step by step and you should be have your phone running again.
I no longer own an HD2, I've switched to the Galaxy Note, so I won't be able to walk you through this one. There are still a ton of great people (like Erroneous91 :-D) who can help though.
Good luck!
Erroneous91 said:
Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.
Click to expand...
Click to collapse
hi Erroneous91, Thanks for the Reply.
When I install Radio Leo 2.15.50.14 it stops at 96%
I tried several times, but it stops at same position. [Screenshot attached]
I tried in both ways SD card method and USB method.
Tried doing after completing Task29, but no luck
HSPL 2.08 has installed properly
and I am not able to follow rest of the tasks cause of this Radio issue.
Please help.
Thanks
Sounds like a stuck Radio the only thing I know to tell you to do is to start downloading all the stock ROMs you can find. Then try flashing them one by one. Try flashing them both by RUU and by SD card. Also start with the older ROMs and work your way to the newer ROMs. Just remember though ifyou have a T-Mobile US (TMOUS) HD2 you can not flash a radio with a 51 in it or a radio below 2.07.50.?? or you will hard radio brick the device. Maybe you will get lucky and find a ROM that will flash. Remember though that if you flash via SD card even though the flash may not complete it may have still overwritten your HSPL so check it after every flash attempt.
Edit: I just looked at the attached pictures in the OP. You problem is not a stuck radio it is your device I'D has gotten changed some how, look at the top line of the bootloader it is not correct.You can still follow my suggestion from above or you can also maybe try using the device I talk about in this post here.
Also at Erroneous91, you should have HSPL as step number one because without HSPL you can not even run a task 29. Now I know you just wanted to make sure that the OP had the correct HSPL to use MAGLDR but without HSPL you can only flash the correct stock ROMs for the HD2 so HSPL should always be the first thing to flash. Plus please refrain from telling someone that has a out of the ordinary issue with flashing or booting things correctly to use task 29. This wipes whatever usable software that is on the device off and may leave them with a device they can not get software back on to like the OP is now.
Hello again,
firstly I'm gonna ask you has your HD2 hanged before by overheating, like when running Android/WP7 or similar things?
If not, this should be the final solution, follow this easy quick guide:
1. Download the attachment from udK from here: LINK IN YOUR INBOX
2. Extract in whatever folder you like
3. Download the RADIO 2.15.50.14 from here LINK IN YOUR INBOX
4. Extract the the .nbh to the folder you extracted the the Leo_CustomRUU from step 2. and rename it to RUU_Signed.nbh
5. You should now have 2 files in one folder: 1. CustomRUU.exe 2. RUU_Signed.nbh
6. Power on your HD2, enter bootloader by holding volume down key, connect USB to computer, run CustomRUU.exe and follow, it's like flashing HSPL, but instead your flashing the RADIO.
If you had the HD2 hanging before because of overheating, it's possible that on 96% it's processing too much data that it overheats again and just hangs.
Otherwise try this solution, it's basically an alternate way to install the RADIO.
Hi Erroneous91, T-Macgnolia,
Thanks lot for the replies.
Sadly! after couple of ROM updates via SD card and via USB, now HD2 doesn't even load into Bootloader mode (Tri-color).
when I insert the battery and push the power button It nonstoply vibrates, need to remove the battery to stop the vibration.
pretty sad seen, I have no idea what to do now, kinda hard brick I guess, need to find a repairman to fix the issue.
Anyway thanks lot again for your great support.
Sad...
Sadly, this really sounds like the processor overheat problem, which I had, I bought a HD2 that had the processor overheating problem earlier for parts.
What it does, it just restarts on a certain point and then just keeps vibrating, cuz it can't even pass the logo screen from restarting itself infinite times.
If yours is overheating, you can test out this by trying to chill it down(people tried by putting the HD2 in the actual freezer :laugh:, but only for a few minutes, just to make it a bit lower of the normal temp.) and trying to turn it on to see will it pass to bootloader, I'm kinda 90% sure that this is the problem now.
P.S.: if it boots normally after chilling it down in the freezer, prepare your RUU program with the renamed RADIO in the same folder, launch bootloader, connect USB, launch RUU program fast, next, next and try to make it finish the Radio installation. Also don't hold the phone in your hands, that would surely heat it up quite a bit.
I wish you good luck with the phone!
how can solve this problem plz i want solution
how can solve this problem plz i want solution
harshadura said:
Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha
Click to expand...
Click to collapse
I suggest to flash it back to Windows 6.5 and after that to start all over.
Here's a walkthrough
NEEDED TOOLS:
- HSPL4 by cotulla and bepe from: forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028 ..
- Radio 2.15.50.14 from: http://www.hotfile.com/dl/136377459/0998e73/Radio-Leo-2.15.50.14.rar.html?lang=tr
- Advanced ROM Update Utility by Barin from: forum.xda-developers.com/attachment.php?attachmentid=492295&d=1295291861
- aMagldr 1.13 by Cotulla from http://forum.xda-developers.com/showthread.php?t=893618
- aMagldr 1.13.06 by Cotulla but modified by symbuzzer from: http://androidforum.tytung.com/new-2-08-hspl-with-gez-exploit-t127.html
- Black LK by Kokotas from: http://www.mediafire.com/?tzg7whl9wwaih
- DFT DAF (DFT Android Flasher) by bepe and cotulla from: forum.xda-developers.com/attachment.php?attachmentid=552314&d=1301130234
- Extented TWRP Recovery by Kokotas (recommended) from: http://forum.xda-developers.com/showthread.php?t=2120297
- 4EXT Recovery (SD Version) by Xylograph from: https://goo.im/devs/Xylograph/Various/Recoveries/SD/recovery_4EXT2.2.7_leo_sd.zip/
- Custom Image Update Utility for cLK by Kokotas from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- Fastboot Drivers by shimp208 from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- sboot & tboot flashers by bojanbl from: http://forum.xda-developers.com/showpost.php?p=31256707&postcount=967
1. HSPL INSTALLATION:
a) Download WinCE drivers from Needed Tools section and install it to PC.
b) Download HSPL4 from Needed Tools section and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Connect HD2 to PC via USB cable and Run HSPL.exe
e) Select 2.08.HSPL for aMagldr bootloader, 3.03.HSPL for Black LK bootloader
2. RADIO INSTALLATION:
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Download Advanced Rom Update Utility from Needed Tools and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select CustomRUU (Task32) and Radio 2.15.50.14.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Rename Radio 2.15.50.14.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
3. BOOTLOADER INSTALLATION:
a) You need to select a bootloader in this step. There are two alternatives; aMagldr and Black LK. For differences between them, please read this: http://forum.xda-developers.com/showpos ... ostcount=1 There is a third alternative too. It is HaRET. For detailed info about it, please look 5th post.
b) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract *.nbh formatted file on PC's desktop. Use TWRP attached and lastest version of Black LK.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select RegularRUU (Task28) and *.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract nbh formatted file on PC's desktop. Note: Use TWRP attached and lastest version of Black LK.
b) Rename *.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
4. AMAGLDR NAND PARTITIONING AND RECOVERY INSTALLATION:
a) Download DFT DAF (DFT Android Flasher) from Needed Tools section and extract Recovery_250 folder on your desktop.
b) In Recovery_250 folder; open flash.cfg file via a text editor, for example Notepad.
c) You must to change system ya 250M value with needed system value by target rom. For example Tytung's NexusHD2 ICS 4.0.4 CM9 3.0b rom needs 170M system partition. I recommend to change this value like "system size + 10M, so for Tytung's ICS rom use "180M" If you want to use NativeSD or DataOnExt methods, you need a ext4 partition. For detailed information about partitioning sd car, please look 5th post.
d) Edit cache ya 10M to cache ya 2M and recovery rrecov|ro|nospr 5M cwm_recovery_leo.img to recovery rrecov|ro|nospr filesize cwm_recovery_leo.img and save flash.cfg file.
e) Download Extented TWRP Recovery and extract *.img file in Desktop\Recovery_250\ folder. You can use another recoveries too.
f) Delete recovery-raw.img file from Recovery_250 folder and rename extracted *.img file to cwm_recovery_leo.img
g) Power on HD2. In aMagldr menu, select USB Flasher option with volume up, volume down and green (answer) keys.
h) Connect HD2 to PC and run DAF.exe from Recovery_250 folder and continue installation.
5. ANDROID ROM INSTALLATION:
a) Download rom's flashable zip file from our site or XDA.
b) Copy zip file to SD card via a sd adaptor or USB MassStg option in aMagldr or Mount USB option in Extented TWRP.
c) !!! Don't forget to edit system size !!! & !!! Don't forget to create ext4 partition for dataonext and nativesd methods!!!
d) Reboot HD2 in Recovery Mode:
* For aMagldr users, hold Power button when HD2 is starting. And select AD Recovery option.
* For Black LK users, hold Home button when HD2 is starting.
e) In Recovery, select Install option and select roms flashable zip.
f) If your rom supports aroma installer, you should see some options like installation methods (Nand, DataOnExt and NativeSD) and connection method (rmnet, ppp)
6. CREATING EXT4 PARTITION FOR NATIVESD & DATAONEXT METHODS:
Note: You can do that on your device via ExTWRP and 4ext recoveries. There are several PC tools too.
Note 2: This operation will format your SD card. Please back up firstly.
-For ExTWRP:
1) Reboot into recovery and go Advanced>Partition SD Card menu.
2) Select EXT4 and set its size. (I recommend minimal 1024MB)
3) And swipe Swipe to Partition.
-For 4ext Recovery:
1) Reboot into recovery and go advanced>Partition SD Card menu.
2) Select Remove all partitİons ... from options.
3) For 1st sd-ext part; select size. (I recommend minimal 1024MB)
4) For 2sd sd-ext part; select skip.
5) For swap partition; select skip.
6) You can convert its type to ext3<=>ext4 from EXT3 - 4EXT - EXT4 menu.

Categories

Resources