Database Users

[Q] ss sd kernel open fail

I have a us T-Mobile htc hd2 which was running android nand sense and I had a touch screen issue. I found the fix to revert my phone back to factory, un-installing hspl back to spl. Sent the phone off to htc which they replaced the screen under the warranty. I got my phone back and tried to put the same programs and files I used in the beginning
I have spent hours reading and trying things suggested like using a radio file Radio_Leo_2.15.50.14, I have downgraded spl from my 2.10.000 to 2.08.000
When the phone reboots I get a message ss sd kernel open fail then MAGLDR Boot Menu Screen but am unable to load files with the usb
Any help?

imglknight said:
I have a us T-Mobile htc hd2 which was running android nand sense and I had a touch screen issue. I found the fix to revert my phone back to factory, un-installing hspl back to spl. Sent the phone off to htc which they replaced the screen under the warranty. I got my phone back and tried to put the same programs and files I used in the beginning
I have spent hours reading and trying things suggested like using a radio file Radio_Leo_2.15.50.14, I have downgraded spl from my 2.10.000 to 2.08.000
When the phone reboots I get a message ss sd kernel open fail then MAGLDR Boot Menu Screen but am unable to load files with the usb
Any help?
Click to expand...
Click to collapse
Hi,
Did you install HSPL 2.08HSPL?
THIS TOOL is very useful for everything you need...

yes I loaded hspl 208
I tried again and got the same error from MAGLDR113 sd kernl open fail and I tried to port DEFT Android again and got this error message
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)

imglknight said:
yes I loaded hspl 208
I tried again and got the same error from MAGLDR113 sd kernl open fail and I tried to port DEFT Android again and got this error message
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Click to expand...
Click to collapse
Hi,
You need to start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.

malybru said:
Hi,
You need to start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
I dont get it ....I have problems with this (when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache) I cant get there when i go to ad recovery it says "no boot sources " ...please help ...:-/
Im sitting with this phone already 3 days ...I start to hate it ....I had windows 6.5 then I put Android on but the problem was that i couldn't get right radio ...so I didnt had 3G/H ......does anybody know if there are some special link for HTC HD 2 Leo T-Mobile 1024....???step by step how to put on android with working i-net connection?????

Did you install Clockworkmod? Can be found here

renars.k said:
I dont get it ....I have problems with this (when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache) I cant get there when i go to ad recovery it says "no boot sources " ...please help ...:-/
Im sitting with this phone already 3 days ...I start to hate it ....I had windows 6.5 then I put Android on but the problem was that i couldn't get right radio ...so I didnt had 3G/H ......does anybody know if there are some special link for HTC HD 2 Leo T-Mobile 1024....???step by step how to put on android with working i-net connection?????
Click to expand...
Click to collapse
Hi,
Sorry,I've been really busy.
Try in the order of things...
1.use toolkit to install HSPL 2.08 HSPL
2.Task 29
3.Flash radio
4.install magldr and so on from there.
Then the rest is the same on the list.

Am I getting the error message “Error Description: USB init failed” because I don’t have a sd card in the phone? Is that where I am going wrong?

make sure that the files initrd and zimage are copied to the root of the sd card. do not copy the whole foler bec magldr will not be able to recognize it.

Someone Help

Hi,
I keep having problems every time installing a Nana Android on my HD2.
I have looked at Installing for Newbies but keeps giving me error messages.
I have gone back to Stock Win Mobile 6.5 as I'm having troubles.
Can someone help me?

xda_apprentice said:
Hi,
I keep having problems every time installing a Nana Android on my HD2.
I have looked at Installing for Newbies but keeps giving me error messages.
I have gone back to Stock Win Mobile 6.5 as I'm having troubles.
Can someone help me?
Click to expand...
Click to collapse
First of all calm down mate... dont get nervous,
You need to be more specific with the error thing you are telling us..so we can help you
So plz provide us with more info about the error you are getting and when you are getting it(on which step of the nand setup).

Dakargr said:
First of all calm down mate... dont get nervous,
You need to be more specific with the error thing you are telling us..so we can help you
So plz provide us with more info about the error you are getting and when you are getting it(on which step of the nand setup).
Click to expand...
Click to collapse
Thanks for your reply.
I am back on Win Mobile 6.5. I want this rom :
http://forum.xda-developers.com/showthread.php?t=1264828
I read 'Install nand for Newbie' but happened was I used HTC HD2 Tool kit to:
Wipe29, install Magldr, install Radio butit made stuck in HTC Screen.
Where am I going wrong?

xda_apprentice said:
Thanks for your reply.
I am back on Win Mobile 6.5. I want this rom :
http://forum.xda-developers.com/showthread.php?t=1264828
I read 'Install nand for Newbie' but happened was I used HTC HD2 Tool kit to:
Wipe29, install Magldr, install Radio butit made stuck in HTC Screen.
Where am I going wrong?
Click to expand...
Click to collapse
So from what you stated here you Task29, MAGLDR, Radio (which one byt the way) but did you install Clockworkmod recovery? If you have done nothing then that's why you are stuck at HTC screen as you have no OS or anything loaded yet. MAGLDR is the only thing you have installed.
From your steps you then need to:
1. Install the appropriate recovery (which I and another user had linked you to in another one of your posts)
2. Boot into MAGLDR (by holding power button) and then boot into CWM recovery
3. Partition your sdcard with your desired size (512-1024mb respectively but do not forget to backup the contents of your sdcard as partitioning will format it)
4. Transfer the rom you want to your sdcard
5. Flash it from CWM recovery
6. Reboot
7. Enjoy Nand android build and go have a donut
Post if you have additional questions

chrisrj28 said:
So from what you stated here you Task29, MAGLDR, Radio (which one byt the way) but did you install Clockworkmod recovery? If you have done nothing then that's why you are stuck at HTC screen as you have no OS or anything loaded yet. MAGLDR is the only thing you have installed.
From your steps you then need to:
1. Install the appropriate recovery (which I and another user had linked you to in another one of your posts)
2. Boot into MAGLDR (by holding power button) and then boot into CWM recovery
3. Partition your sdcard with your desired size (512-1024mb respectively but do not forget to backup the contents of your sdcard as partitioning will format it)
4. Transfer the rom you want to your sdcard
5. Flash it from CWM recovery
6. Reboot
7. Enjoy Nand android build and go have a donut
Post if you have additional questions
Click to expand...
Click to collapse
I'll just keep my Doughnut to the side until I install Android
3) How do I back it up? And how do I know what size 512 or 1024?
I'll do the above steps and will report back.
P.s. I am on Stock Windows Mobile 6.5.

xda_apprentice said:
I'll just keep my Doughnut to the side until I install Android
3) How do I back it up? And how do I know what size 512 or 1024?
I'll do the above steps and will report back.
P.s. I am on Stock Windows Mobile 6.5.
Click to expand...
Click to collapse
Nice haha,
Anyway by backup your sdcard I mean save whatever is on the card (music, pictures, etc.) to your computer, that way you can copy it back to the card after you have everything set up
As for what size to partition your sdcard, it's up to you. That partition space is the size of memory you will have to install user apps so it depends on how many you plan on using
When you make it to recovery you will see the option to partition your card, it will take you through the process.

chrisrj28 said:
Nice haha,
Anyway by backup your sdcard I mean save whatever is on the card (music, pictures, etc.) to your computer, that way you can copy it back to the card after you have everything set up
As for what size to partition your sdcard, it's up to you. That partition space is the size of memory you will have to install user apps so it depends on how many you plan on using
When you make it to recovery you will see the option to partition your card, it will take you through the process.
Click to expand...
Click to collapse
This is what I did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
After step 11, I got this message:
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736) "
My usb is clearly connected. This happened before too.

xda_apprentice said:
This is what I did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
After step 11, I got this message:
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736) "
My usb is clearly connected. This happened before too.
Click to expand...
Click to collapse
Ok after step 10 installing MAGLDR you should boot into the MAGLDR screen. Select the USB Flasher option, instead of using the Nand toolkit try downloading the recovery here: http://forum.xda-developers.com/attachment.php?attachmentid=729033&d=1316816787
and using the daf.exe try flashing it that way. Make sure MAGLDR is in USB flasher selection.

chrisrj28 said:
Ok after step 10 installing MAGLDR you should boot into the MAGLDR screen. Select the USB Flasher option, instead of using the Nand toolkit try downloading the recovery here: http://forum.xda-developers.com/attachment.php?attachmentid=729033&d=1316816787
and using the daf.exe try flashing it that way. Make sure MAGLDR is in USB flasher selection.
Click to expand...
Click to collapse
It says " Please waiting .."
But it's been doing that for 20 minutes now
I meant stuck on HTC Quietly Brilliant Screen"

xda_apprentice said:
It says " Please waiting .."
But it's been doing that for 20 minutes now
I meant stuck on HTC Quietly Brilliant Screen"
Click to expand...
Click to collapse
WHich part says please wait? When you installed MAGLDR your computer installed the drivers for it correct?

chrisrj28 said:
WHich part says please wait? When you installed MAGLDR your computer installed the drivers for it correct?
Click to expand...
Click to collapse
Yea all the drivers were correct. It just keeps looping into that screen "HTC Quietly Brilliant Screen"

xda_apprentice said:
Yea all the drivers were correct. It just keeps looping into that screen "HTC Quietly Brilliant Screen"
Click to expand...
Click to collapse
Ok so did you successfully flash the CWM recovery?

chrisrj28 said:
Ok so did you successfully flash the CWM recovery?
Click to expand...
Click to collapse
This is what I exactly did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr *Used the file you supplied
11)in toolkit at left choose 150 and write 5 instead of 45 *could not do this as I got error msg
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot

xda_apprentice said:
This is what I exactly did:
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr *Used the file you supplied
11)in toolkit at left choose 150 and write 5 instead of 45 *could not do this as I got error msg
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
Click to expand...
Click to collapse
Alright so you successfully booted into CWM recovery and flashed the Rom and it boot loops correct?

chrisrj28 said:
Alright so you successfully booted into CWM recovery and flashed the Rom and it boot loops correct?
Click to expand...
Click to collapse
Yes. It just loops and nothing happens

xda_apprentice said:
Yes. It just loops and nothing happens
Click to expand...
Click to collapse
Ok, boot back into MAGLDR and select USB Flasher again. Download the attached CWM Partition which I edited to 180mb partition. Click the Daf.exe and let it install. Then go to AD Recovery and flash the rom again, let me know how that works. (make sure your sdcard is already partitioned properly

chrisrj28 said:
Ok, boot back into MAGLDR and select USB Flasher again. Download the attached CWM Partition which I edited to 180mb partition. Click the Daf.exe and let it install. Then go to AD Recovery and flash the rom again, let me know how that works. (make sure your sdcard is already partitioned properly
Click to expand...
Click to collapse
I done everything as stated above. It says "Please wait ... Installing"
Then I see custom "HTC Quietly Brilliant"
And you guessed it ... it's looping
Is the rom? I did look at the website for the rom and it doesn't say anything

xda_apprentice said:
I done everything as stated above. It says "Please wait ... Installing"
Then I see custom "HTC Quietly Brilliant"
And you guessed it ... it's looping
Is the rom? I did look at the website for the rom and it doesn't say anything
Click to expand...
Click to collapse
Ok there is something being missed here. The please wait, installing part is the MAGLDR portion correct?

chrisrj28 said:
Ok there is something being missed here. The please wait, installing part is the MAGLDR portion correct?
Click to expand...
Click to collapse
How do I check/change that?

xda_apprentice said:
How do I check/change that?
Click to expand...
Click to collapse
Ok lets start from the beginning, post what you actually did step by step.

[Q] Help with flashing Android NAND

I wanted to flash my HD2 with android to NAND but checked my bootloader and it was SPL3.03.
So do I need to downgrade somehow and if so how?
or what are the other options thanks.

Bootloader - Hspl4 - 2.08.hspl
done.

thanks for the reply just tried that and it says critical error.

Its very sipmle.
1. shutdown phone.
2. Power on and hold volumedown button (you see 4 color loader)
3. plugin usb cable to computer and wait for install driver
4. run hspl4
5. chose SPL 2.08.HSPL from list and next you see information about hd2 hack and restart phone when finish
6. task29
7. install MAGLDR113_DAF
8. make task from your prefered rom
I suggest use http://forum.xda-developers.com/showthread.php?t=1166948
For me is the best now
GL

download hd2 toolkit from the forums. install HardSPL, select 2.08 and it should unlock your phone. then install MAGLDR, proper rom partition and then choose preferred rom and install on sd card. go into ad recovery after rebooting phone by holding down end button and install rom

download hd2 toolkit from the forums. install HardSPL, select 2.08 and it should unlock your phone. then install MAGLDR, proper rom partition and then choose preferred rom and install on sd card. go into ad recovery after rebooting phone by holding down end button and install rom

[Q] HD2 NAND Toolkit

So i bought my first HD2 (EU version) from ebay a week ago and i've been trying to install custom roms since then.
I've been following the instructions from the NAND Toolkit thread but i could not install the ClockworkMod Recovery 5.0.2.6, because when the cmd command window appears it it stops at ( *daemon started successfully* ).
I have installed right now update recovery 3.0.0.5 which i found somewhere else but still not all roms work. The only rom that works is this: http://forum.xda-developers.com/showthread.php?t=1441462
Can someone help how to install ClockworkMod Recovery 5.0.2.6 manually or with some other way
HTC HD2
aMAGLDR V1.13
SPL - 2.08.HSPL
ClockworkMod Recovery 3.0.0.5

Install clockwork through magdlr... seems like your installing through fastboot.
Hope this helps.
Sent from my HTC HD2 using xda premium

Difference
What's the difference and how do i actually do that????

john_gr said:
What's the difference and how do i actually do that????
Click to expand...
Click to collapse
Just see this guide and download any of the recoveries at the bottom of the post. All you have to do is put your phone in USB Flasher, connect it to the PC and run the DAF.exe file within the selected CWM folder. If you want to change the recovery size, just open 'flash.cfg' (not flash.cfg.txt) with notepad or something similar (Windows has it preinstalled, dunno about other computers) and change the system partition value.
To be honest, I don't know how using the manual method would help over using the Toolkit, but the guide I linked worked perfectly for me, so try it out I guess

Try:
D. How do i install recovery / do a repartition on MAGLDR?
1) Choose MAGLDR Repartition on top.
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
E. How do i update recovery on MAGLDR?
1) Choose MAGLDR update recovery on top.
2) Press Update button on bottom left corner.
3) Follow instructions.
taken from here http://forum.xda-developers.com/showthread.php?t=1090783

repost
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...

hi John_gr
maybe you can try this method?
http://forum.xda-developers.com/showthread.php?p=25322357#post25322357
after you repartition in magldr CWM will be installed then just go Magldr (phone booting) then select #8 AD Recovery

john_gr said:
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
Click to expand...
Click to collapse
2) Check in your rom tread what partitions are advised and then choose the correct sizes. Cashe size you can put 5 or 10 MB.
And then follow point 3 and 4
As for your second question probably it's becouse you didn't install recovery correct.

john_gr said:
The problem is that i don't know what this is and how is it helpful:
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
and
When i choose "Recovery Update" and press update (of course usb debbugging Checked On on phone) i left my phone like this for about 15 mins and nothing was happening...
Click to expand...
Click to collapse
Why would USB debugging matter? You use USB Flasher in MAGLDR to flash CWM

[HD2 not booting] Freezed and stopped on MAGLDR mode

Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha

Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.

Harshadura, I am the guy who wrote that tutorial. You haven't bricked your phone (yet) so you should be okay. Just follow Erroneous91's advice, step by step and you should be have your phone running again.
I no longer own an HD2, I've switched to the Galaxy Note, so I won't be able to walk you through this one. There are still a ton of great people (like Erroneous91 :-D) who can help though.
Good luck!

Erroneous91 said:
Make sure that you have the radio: 2.15.50.14, also HSPL 2.08.
This is a quick guide from scratch on how to install a Android ROM.
Flash in this order via HD2 toolkit(download it from the net):
1. task 29 (flashed via bootloader by holding volume down. Deletes ROM/MAGLDR, leaves HSPL + RADIO, this will make the phone only be able to boot to bootloader by holding the volume down key, otherwise it's stuck on the HTC logo, just pull out the battery and power on by holding the volume down button to continue flashing (don't panic, it's how it works))
2. RADIO (flashed via bootloader by holding volume down. Find a radio 2.15.50.14 on the net, if it's already flashed, try to continue, if it fails reflash the radio and re-follow the steps)
3. HSPL (flashed via bootloader by holding volume down. You have it in the hd2 toolkit, the 2.08 version)
4. MAGLDR (flashed via bootloader by holding volume down. In hd2 toolkit 1.13 version)
5. CWM (flash this by entering MAGLDR and choosing the USB Flasher option. Choose one, there are 3 to choose from, depending if your android ROM needs 150 or 200 or even 400 MB partition, DL from here: http://forum.xda-developers.com/showthread.php?t=898913)
6. Android ROM (insert your sd card in to a reader or boot up MAGLDR/AD Recovery option(this will launch CWM(ClockWorkMethod))/Mounts and storage/Mount SD-card this will make your phone like a flash drive, make sure it's FAT32, most probably it already is, copy the "androidromname.zip" on the root of your sd card, insert sd-card back in to the phone if you took it out for a reader, boot to MAGLDR, choose AD Recovery(this will launch CWM(ClockWorkMethod)) select install zip from sd card, then select choose zip from sd card, find the ROM on your sd card confirm Yes, after the flashing is complete, hit the back button and select first option Restart device, it will go in MAGLDR, select BOOT AD NAND.)
7. Done.
Click to expand...
Click to collapse
hi Erroneous91, Thanks for the Reply.
When I install Radio Leo 2.15.50.14 it stops at 96%
I tried several times, but it stops at same position. [Screenshot attached]
I tried in both ways SD card method and USB method.
Tried doing after completing Task29, but no luck
HSPL 2.08 has installed properly
and I am not able to follow rest of the tasks cause of this Radio issue.
Please help.
Thanks

Sounds like a stuck Radio the only thing I know to tell you to do is to start downloading all the stock ROMs you can find. Then try flashing them one by one. Try flashing them both by RUU and by SD card. Also start with the older ROMs and work your way to the newer ROMs. Just remember though ifyou have a T-Mobile US (TMOUS) HD2 you can not flash a radio with a 51 in it or a radio below 2.07.50.?? or you will hard radio brick the device. Maybe you will get lucky and find a ROM that will flash. Remember though that if you flash via SD card even though the flash may not complete it may have still overwritten your HSPL so check it after every flash attempt.
Edit: I just looked at the attached pictures in the OP. You problem is not a stuck radio it is your device I'D has gotten changed some how, look at the top line of the bootloader it is not correct.You can still follow my suggestion from above or you can also maybe try using the device I talk about in this post here.
Also at Erroneous91, you should have HSPL as step number one because without HSPL you can not even run a task 29. Now I know you just wanted to make sure that the OP had the correct HSPL to use MAGLDR but without HSPL you can only flash the correct stock ROMs for the HD2 so HSPL should always be the first thing to flash. Plus please refrain from telling someone that has a out of the ordinary issue with flashing or booting things correctly to use task 29. This wipes whatever usable software that is on the device off and may leave them with a device they can not get software back on to like the OP is now.

Hello again,
firstly I'm gonna ask you has your HD2 hanged before by overheating, like when running Android/WP7 or similar things?
If not, this should be the final solution, follow this easy quick guide:
1. Download the attachment from udK from here: LINK IN YOUR INBOX
2. Extract in whatever folder you like
3. Download the RADIO 2.15.50.14 from here LINK IN YOUR INBOX
4. Extract the the .nbh to the folder you extracted the the Leo_CustomRUU from step 2. and rename it to RUU_Signed.nbh
5. You should now have 2 files in one folder: 1. CustomRUU.exe 2. RUU_Signed.nbh
6. Power on your HD2, enter bootloader by holding volume down key, connect USB to computer, run CustomRUU.exe and follow, it's like flashing HSPL, but instead your flashing the RADIO.
If you had the HD2 hanging before because of overheating, it's possible that on 96% it's processing too much data that it overheats again and just hangs.
Otherwise try this solution, it's basically an alternate way to install the RADIO.

Hi Erroneous91, T-Macgnolia,
Thanks lot for the replies.
Sadly! after couple of ROM updates via SD card and via USB, now HD2 doesn't even load into Bootloader mode (Tri-color).
when I insert the battery and push the power button It nonstoply vibrates, need to remove the battery to stop the vibration.
pretty sad seen, I have no idea what to do now, kinda hard brick I guess, need to find a repairman to fix the issue.
Anyway thanks lot again for your great support.

Sad...
Sadly, this really sounds like the processor overheat problem, which I had, I bought a HD2 that had the processor overheating problem earlier for parts.
What it does, it just restarts on a certain point and then just keeps vibrating, cuz it can't even pass the logo screen from restarting itself infinite times.
If yours is overheating, you can test out this by trying to chill it down(people tried by putting the HD2 in the actual freezer :laugh:, but only for a few minutes, just to make it a bit lower of the normal temp.) and trying to turn it on to see will it pass to bootloader, I'm kinda 90% sure that this is the problem now.
P.S.: if it boots normally after chilling it down in the freezer, prepare your RUU program with the renamed RADIO in the same folder, launch bootloader, connect USB, launch RUU program fast, next, next and try to make it finish the Radio installation. Also don't hold the phone in your hands, that would surely heat it up quite a bit.
I wish you good luck with the phone!

how can solve this problem plz i want solution
how can solve this problem plz i want solution
harshadura said:
Hi,
I have tried many ways to get work my HD2 back, but its still not.. when I start the phone it freezes at MAGLDR mode.
(Please see Screenshots attached for your reference.) no option buttons are displayed (only the MAGLDR heading.)
I can enter the Recovery mode as well.
I have flashed HD2 stock ROM via SD card method according to this thread I suspect this is the definite point where I have gone wrong.
According to that post Some warning messages were given..
Code:
if you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
I have searched Forums a lot, but still no luck, Please anybody help me to solve this issue.
Thanks lot
-Harsha
Click to expand...
Click to collapse

I suggest to flash it back to Windows 6.5 and after that to start all over.
Here's a walkthrough
NEEDED TOOLS:
- HSPL4 by cotulla and bepe from: forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028 ..
- Radio 2.15.50.14 from: http://www.hotfile.com/dl/136377459/0998e73/Radio-Leo-2.15.50.14.rar.html?lang=tr
- Advanced ROM Update Utility by Barin from: forum.xda-developers.com/attachment.php?attachmentid=492295&d=1295291861
- aMagldr 1.13 by Cotulla from http://forum.xda-developers.com/showthread.php?t=893618
- aMagldr 1.13.06 by Cotulla but modified by symbuzzer from: http://androidforum.tytung.com/new-2-08-hspl-with-gez-exploit-t127.html
- Black LK by Kokotas from: http://www.mediafire.com/?tzg7whl9wwaih
- DFT DAF (DFT Android Flasher) by bepe and cotulla from: forum.xda-developers.com/attachment.php?attachmentid=552314&d=1301130234
- Extented TWRP Recovery by Kokotas (recommended) from: http://forum.xda-developers.com/showthread.php?t=2120297
- 4EXT Recovery (SD Version) by Xylograph from: https://goo.im/devs/Xylograph/Various/Recoveries/SD/recovery_4EXT2.2.7_leo_sd.zip/
- Custom Image Update Utility for cLK by Kokotas from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- Fastboot Drivers by shimp208 from: http://forum.xda-developers.com/showpost.php?p=21679773&postcount=866
- sboot & tboot flashers by bojanbl from: http://forum.xda-developers.com/showpost.php?p=31256707&postcount=967
1. HSPL INSTALLATION:
a) Download WinCE drivers from Needed Tools section and install it to PC.
b) Download HSPL4 from Needed Tools section and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Connect HD2 to PC via USB cable and Run HSPL.exe
e) Select 2.08.HSPL for aMagldr bootloader, 3.03.HSPL for Black LK bootloader
2. RADIO INSTALLATION:
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Download Advanced Rom Update Utility from Needed Tools and extract it on PC's desktop.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select CustomRUU (Task32) and Radio 2.15.50.14.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download Radio 2.15.50.14 from Needed Tools section and extract nbh formatted file on PC's desktop.
b) Rename Radio 2.15.50.14.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
3. BOOTLOADER INSTALLATION:
a) You need to select a bootloader in this step. There are two alternatives; aMagldr and Black LK. For differences between them, please read this: http://forum.xda-developers.com/showpos ... ostcount=1 There is a third alternative too. It is HaRET. For detailed info about it, please look 5th post.
b) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract *.nbh formatted file on PC's desktop. Use TWRP attached and lastest version of Black LK.
c) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
d) Run LeoAdvancedRUU.exe and select RegularRUU (Task28) and *.nbh from Select NBH File option. Press Next and contiunue installation.
or
a) Download aMagldr 1.13 or Black LK 1.5.x from Needed Tools section and extract nbh formatted file on PC's desktop. Note: Use TWRP attached and lastest version of Black LK.
b) Rename *.nbh to leoimg.nbh
c) Copy leoimg.nbh to SD card's root directory via a card reader from PC.
d) Power off HD2 and press Volume Down + Power buttons until see this screen: http://cotulla.pp.ru/imgtmp/hspl208.PNG
e) Press Power button for installing.
4. AMAGLDR NAND PARTITIONING AND RECOVERY INSTALLATION:
a) Download DFT DAF (DFT Android Flasher) from Needed Tools section and extract Recovery_250 folder on your desktop.
b) In Recovery_250 folder; open flash.cfg file via a text editor, for example Notepad.
c) You must to change system ya 250M value with needed system value by target rom. For example Tytung's NexusHD2 ICS 4.0.4 CM9 3.0b rom needs 170M system partition. I recommend to change this value like "system size + 10M, so for Tytung's ICS rom use "180M" If you want to use NativeSD or DataOnExt methods, you need a ext4 partition. For detailed information about partitioning sd car, please look 5th post.
d) Edit cache ya 10M to cache ya 2M and recovery rrecov|ro|nospr 5M cwm_recovery_leo.img to recovery rrecov|ro|nospr filesize cwm_recovery_leo.img and save flash.cfg file.
e) Download Extented TWRP Recovery and extract *.img file in Desktop\Recovery_250\ folder. You can use another recoveries too.
f) Delete recovery-raw.img file from Recovery_250 folder and rename extracted *.img file to cwm_recovery_leo.img
g) Power on HD2. In aMagldr menu, select USB Flasher option with volume up, volume down and green (answer) keys.
h) Connect HD2 to PC and run DAF.exe from Recovery_250 folder and continue installation.
5. ANDROID ROM INSTALLATION:
a) Download rom's flashable zip file from our site or XDA.
b) Copy zip file to SD card via a sd adaptor or USB MassStg option in aMagldr or Mount USB option in Extented TWRP.
c) !!! Don't forget to edit system size !!! & !!! Don't forget to create ext4 partition for dataonext and nativesd methods!!!
d) Reboot HD2 in Recovery Mode:
* For aMagldr users, hold Power button when HD2 is starting. And select AD Recovery option.
* For Black LK users, hold Home button when HD2 is starting.
e) In Recovery, select Install option and select roms flashable zip.
f) If your rom supports aroma installer, you should see some options like installation methods (Nand, DataOnExt and NativeSD) and connection method (rmnet, ppp)
6. CREATING EXT4 PARTITION FOR NATIVESD & DATAONEXT METHODS:
Note: You can do that on your device via ExTWRP and 4ext recoveries. There are several PC tools too.
Note 2: This operation will format your SD card. Please back up firstly.
-For ExTWRP:
1) Reboot into recovery and go Advanced>Partition SD Card menu.
2) Select EXT4 and set its size. (I recommend minimal 1024MB)
3) And swipe Swipe to Partition.
-For 4ext Recovery:
1) Reboot into recovery and go advanced>Partition SD Card menu.
2) Select Remove all partitİons ... from options.
3) For 1st sd-ext part; select size. (I recommend minimal 1024MB)
4) For 2sd sd-ext part; select skip.
5) For swap partition; select skip.
6) You can convert its type to ext3<=>ext4 from EXT3 - 4EXT - EXT4 menu.