I have a T-Mobile G1 that I had not used for a while. I decided to upgrade it to 2.2 and have been successful (Amon_RA v1.7, Cryogen 6). However, I had to do the upgrade using the SD card and WiFi because the USB is not working. I have tried to connect on both my old XP computer that used to work with the G1 and a couple of other computers using XP and Win7 with the same results.
I get USB Device Not Recognized. When I look at the Device Instance Id on the properties screen it shows USB\VID_0000&PID_0000\5&64DAA3C&0&1 and most other entries are unknown.
My Droid X works fine so I am fairly certain this must be a problem on the G1. I don't know how the G1 manages the USB connection so any help is appreciated.
I´m having the same problem but with my Vega tablet.
When I go to properties I get te VID_0000 and pID_0000 therefore y can´t install the drivers. I´ve looked everywhere but didn´t find any solution
Try another cable? Or try and see if this one works with another phone.
Same here with my htc magic, was working fine then just stopped. I've almost given up trying to get it to connect via usb, so it'd be great to see someone give a solution
Sometimes that happens to me, I try to reboot the computer as well as the phone. What really fixed it was having another rom installed.
Got a connection briefly today, then after a fresh install of laszlo's fantastic rom its gone again! Weird!
Sent from my HTC Magic using XDA App
hmmmm... try getting the 'mountusb' apk installed and see if that works...
ldrifta said:
hmmmm... try getting the 'mountusb' apk installed and see if that works...
Click to expand...
Click to collapse
thanks, please excuse my ignorance but where might I find a safe version of 'mountusb'?
Related
Anyway to manually get the drivers for it? I can't find them and I can't sync my device to my computer. Windows Mobile Device Center won't work at all, it doesn't recognize my HD2 and it says the driver installation fails.
Can someone help me out please? Thanks
Windows Mobile Device Centre was all I never needed on my win7 x64. I installed the program before inserting the HD2 though. Obviously make sure you have the program up and running before plugging in the HD2 and selecting activesync on it; It should load up. You could uninstall the driver (from device manager) and start again if all else fails.
What if it does not?
Started doing that "cant recognize" issue while installing NAND (at the radio installation process -r: 2.15., compatible)
Figured to go to stock WinMo with SDCard, but it still cant..
Faster data sync disabled, after that it tried to install the drivers again, but says it fails...
Gotta go to ms and install the updated win mob dev c. The one that ships needs updating.
Also, once you are into the android side of things you should open wmdc, connection settings, and turn off allow usb connections, and install the android usb drivers.
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
thekillingroad said:
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
Click to expand...
Click to collapse
Replace your USB Cable and Thats ALL !
i had the same problem....i am for now using windowx xp
aks777 said:
i had the same problem....i am for now using windowx xp
Click to expand...
Click to collapse
I have been using it win 7 64 bit since the beginning. and I never have a problem with the driver.
Try redownload and reinstall Windows Mobile Device Center from Microsoft website.
Only connect your device after the driver has been properly installed.
in device manager delete usb controller after software installation.
Thanks to ALL, but changing the USB cable, so sure that's ALL? =)
I'm not gonna mention that I've written that I've tried it with many computers and many cables. =)
The phone is sent to HTC and they told me that they ordered a new mainboard.
Hope doesn't take too much time. My Service Provider gave me a Galaxy 7500.. Cupcake, no market.. arrrgh!
Thinking of buying an iPhone and selling it after two weeks but that's gonna cost me $200 loss in two weeks. too much =)
As doing some thinking.. the device cannot "introduce" itself to the computer. I couldn't find a more sense making answer.
If you've tried hard-resetting, cable and PC changing, if it's still not working, then there should be a problem about the phone, mostly about the mainboard.
I suggest anyone having that problem go make your phone check at a service, of course if you have warranty. =)
I have been all over the internet, and I honestly can not find a solution to this problem anywhere. Like, literally, anywhere.
MY hd2 (And other people's) will not connect tot he computer via usb.
Zune software will just not acknowledge that my hd2 is plugged in.
I've tried everything, and my sd card is compatible.
Does anybody have an idea on how to get this fixed?
Using XBoxmod's newest rom
theflduck said:
I have been all over the internet, and I honestly can not find a solution to this problem anywhere. Like, literally, anywhere.
MY hd2 (And other people's) will not connect tot he computer via usb.
Zune software will just not acknowledge that my hd2 is plugged in.
I've tried everything, and my sd card is compatible.
Does anybody have an idea on how to get this fixed?
Using XBoxmod's newest rom
Click to expand...
Click to collapse
Try this
http://www.nirsoft.net/utils/usb_devices_view.html
go there and download a great wee program called USBDeview, run it as admin!
and basically delete anything that could be related to the phone
what that program does is gives you a list of all installed or previous installed USB devices, sometimes USB devices can "hangup" if the wrong driver or an conflict developes, ive used this before to fix a similar situation and it works great.
The reason i think this may be the problem is i had a similar problem in that my phone would only conect to zune when i use a particular USB port, i used a different one on the same HUB and all was well, so i cleared down all the crap using that program and all is now ok!
it will mean having to install any device you delete so i would suggest you disconnect all USB devices first then pull the drivers off for anything related to phones then reconnect anything you need one at a time.
ifd in doubt drop a list of all the devices on that program and ill go through them with you
Thanks so much. I just swiched back to android and i will install wp7 and try this again.
Do you have windows mobile device center 6.1 installed with active sync working?
Have you considered trying a different usb cable? It might be possible the cable is bad. Also maybe try connecting it to another computer to see if it recognizes it.
would be great for an update if you have had any luck on not, other folk are asking teh same question
Sorry i havent gotten back to you guys...
I tried the first post, did not work.
The cable is fine, I use it in android and to charge.
Other computer is not an option for me...
OTher usb ports were a no-go
I tried different roms and everything.
I'm beginning to just want to give up
*Edit: No, active sync isnt installed should i try it?
See if you have libusb installed and if so uninstall it and see what happens. I read somewhere on the net a few days ago that it solved peoples problems that couldn't connect to zune.
theflduck said:
Sorry i havent gotten back to you guys...
I tried the first post, did not work.
The cable is fine, I use it in android and to charge.
Other computer is not an option for me...
OTher usb ports were a no-go
I tried different roms and everything.
I'm beginning to just want to give up
*Edit: No, active sync isnt installed should i try it?
Click to expand...
Click to collapse
no active sync will just confuse things,
you didnt mess about with some of the HTC tools did you?
So you've uninstalled all the devices that teh USBDeview program showed you yeah? i had quite a few phone related devices, just get rid of them all, they will install again when you need them, have you tried using a different USB port, swap it with something else to be sure, try USBDeview again but this time also remove all of zune and everthing else youve installed for WP7, lets go back to the begining and se if there is something thats got messed up
Tanks. Will give it a try
Hi everybody,
I hope you can help me because I really can't find the solution:
When I connect my HD2 WP7-device to my computer it charges, but isn't recognized.
- Zune won't start automatically and won't find any device.
- Device Manager doesn't show any unknown device or something that could be my phone.
What I have tried so far:
- Used a XP3 and W7 x64 machine (also ones without any history with a WP7-phone)
- Used a lot of different cables
- Used a lot of different USB-ports
- reinstalled WP7
- reinstalled zune
- (de)installed activesync
- I'm not sure, but first I had a dual-boot solution with Android and I recall USB also didn't work there.
I started to think the USB-connection of my phone might be broken, but when I use MAGDLR, the USB works as mass storage and I can also use the USB flasher. The Bootloader also works, so I tried the following:
- (using bootloader) restored the HD2 in its original state with a official stock ROM and original (locked) HSPL
- Installed a Android ROM: the USB also does NOT work with WM6.5 or Android.
Does anyone know anything I can try now? And Yes, I have read all of the threads of other people with USB-issues and the MS-solutions, but none of them had the solution for me...
Coffee-donation for whoever has the golden tip
Hello guys, I don't mean to hijack the thread, but I am facing a similar issue.
I installed the LEO70 ROM on my HD2 when it first came out, and forgot all about it. I now want to install the NoDo (7932) update to test it out (and maybe move permanently to an Android ROM eventually when I decide I don't like it). I am facing an issue; I want to upgrade my MagLDR to 1.13 (from 1.12) and ROMUpdateUtility doesn't recognize my phone, giving me the 'Error 260 - Connection' error.
I did remove Windows Mobile Device Center a month or two ago... could this be the problem? I have the latest Zune software installed on my Windows Server 2008 R2 SP1 (x86-64) machine, and when I plug in the phone, Zune automatically starts and recognizes my phone, telling me there's a phone update available (from February that I need to install to enable future updates). I know it will kill my phone, so I won't install it. Also, USBMassStorage mode works nicely.
Any ideas?
Hi sclip,
I don't mind if you try to find an answer to your problem too, but it seems like a different one, because mine does work in bootloader/magdlr-mode.
BTW. I just installed the stock WM6.5 Rom of HTC, and USB still doesn't work! Can it be the radio of hardSPL or is it just broken?
****, after installing the stock WM6.5, it won't install another Radio/MAGDLR using bootloader, it stucks at the 0%.
I think I might haved destroyed my HD2
Daanmannetje said:
****, after installing the stock WM6.5, it won't install another Radio/MAGDLR using bootloader, it stucks at the 0%.
I think I might haved destroyed my HD2
Click to expand...
Click to collapse
remember to HSPL it once you have installed your original Stock rom
dazza9075 said:
remember to HSPL it once you have installed your original Stock rom
Click to expand...
Click to collapse
That did the trick, thanks. To bad it didn't help my USB problem...
since youve tried just about everything else try this
try using USBDVIEW and delete all the USB drivers
also install it on a different PC that hasnt had WP7 connected to it before
to continue with fault testing will requirer us to rule out the PC or the phone, at the mo it could be anything.
since you have Windows 7 install the XP virtual machine and use that, i believe the VM now supports pass through on USB so it should work, i have an old IrDA adaptor that wont install on my w7 PC but it will on the XP VM
dazza9075 said:
since youve tried just about everything else try this
try using USBDVIEW and delete all the USB drivers
also install it on a different PC that hasnt had WP7 connected to it before
to continue with fault testing will requirer us to rule out the PC or the phone, at the mo it could be anything.
since you have Windows 7 install the XP virtual machine and use that, i believe the VM now supports pass through on USB so it should work, i have an old IrDA adaptor that wont install on my w7 PC but it will on the XP VM
Click to expand...
Click to collapse
Thanks for the USBDVIEW-tip, quite a nice piece of software! However it didn't help me with my problem. Using a computer which never had WP7 connected before didn't help either...
Ok... first off im a noob to this forum but I know this is a legitimate issue not user error and ive spent the last 4 days scouring to get SOME information on this and the only thing ive found is remove battery and reset phone... HELLO!!!! thats step one on the list... sorry venting done...
Device: mytouch 4g
OS: Windows 7
When I got this phone i plugged it in and ran with no issues until i tried to root it without success... and when i tried the ADB method i found that the phone would no longer mount into windows 7 i have tried multiple computers and multiple cables so it's a device issue.
When I plug my phone into a computer it comes up with "searching for drivers" and fails... look in device manager and it says "Windows has stopped this device because it has reported problems. (Code 43)"
Tried manually finding drivers and can't...
Tried "repairing" the install of HTC drivers that came off the HTC website and didn't work...
Tried installing PDA net to get different drivers... didnt work
uninstalled devices and get the same issue...
deleted upper and lower filters from registry
Tried every combination of fastboot/USB debug
even tried desperatly deleting cookies/cache/web history(found on another forum)
AND NOTHING WORKS...
if you can think of anything I haven't tried it would be nice
Currently installed Apps that may be involved
Visionary
Super User
Terminal Emulator
I would like to help you out but need to what rom is on your device and what exactly your trying to do on windows
Sent from my HTC Glacier using XDA Premium App
It's running the complete stock rom... i believe it's called espresso... and all im trying to do with it right now is get it to show up in windows as a hard drive...
usually I would assume a driver issue (thats what windows thinks it is) but I've reinstalled the drivers around 10 times desperately and restored my computer to no avail so i think when i tried to root it the first time it flashed the usb firmware... if thats complete bs then just let me know... new to android... not new to computers...
sky2k-y2k said:
It's running the complete stock rom... i believe it's called espresso... and all im trying to do with it right now is get it to show up in windows as a hard drive...
usually I would assume a driver issue (thats what windows thinks it is) but I've reinstalled the drivers around 10 times desperately and restored my computer to no avail so i think when i tried to root it the first time it flashed the usb firmware... if thats complete bs then just let me know... new to android... not new to computers...
Click to expand...
Click to collapse
For a Hard Drive
1lug your phone into the computer
2:On your phone, drag the top slider bar down to the bottom
3:There should be a notification that says charge only. Click on that and select Disk Drive, Mount as disk drive. Click that
Try that and let us know what happens.
Edit: If you are trying to use ADB you want to be on charge only and have USB debugging on . To get to debugging
Menu-settings-applications-development-USB debugging
yeah that was one of the first things I tried(i actually have that as default)... The problem is that my computer thinks its an unknown device when plugged in and I can't point it to the correct driver...
USB Debugging is enabled, correct?
Seems strange... have you even tried installing the driver on another computer?
I've tried debugging on and off...
And yes I've tried a different computer that was one of the second things I tried
Sent from my HTC Glacier using XDA App
sky2k-y2k said:
Ok... first off im a noob to this forum but I know this is a legitimate issue not user error and ive spent the last 4 days scouring to get SOME information on this and the only thing ive found is remove battery and reset phone... HELLO!!!! thats step one on the list... sorry venting done...
Device: mytouch 4g
OS: Windows 7
When I got this phone i plugged it in and ran with no issues until i tried to root it without success... and when i tried the ADB method i found that the phone would no longer mount into windows 7 i have tried multiple computers and multiple cables so it's a device issue.
When I plug my phone into a computer it comes up with "searching for drivers" and fails... look in device manager and it says "Windows has stopped this device because it has reported problems. (Code 43)"
Tried manually finding drivers and can't...
Tried "repairing" the install of HTC drivers that came off the HTC website and didn't work...
Tried installing PDA net to get different drivers... didnt work
uninstalled devices and get the same issue...
deleted upper and lower filters from registry
Tried every combination of fastboot/USB debug
even tried desperatly deleting cookies/cache/web history(found on another forum)
AND NOTHING WORKS...
if you can think of anything I haven't tried it would be nice
Currently installed Apps that may be involved
Visionary
Super User
Terminal Emulator
Click to expand...
Click to collapse
sounds like a driver issue... i am not a 100% but thats what i sounds like.. download and install this program.. it uses the correct drivers.. just make sure u select "HTC" when prompted.. http://junefabrics.com/android/download.php goodluck report back
i tried that already and after trying again (just now) it failed again... i wish this was a simple driver issue...
I might be totally off but try changing your sd card and see whether your computer accepts it.
Also when installing drivers make sure your device is not connected to the computer.
Or try different USB port, or a factory reset.
Sent from my HTC Glacier using XDA Premium App
nope... different sd card/different usb port/factory reset didn't do it...
sky2k, I had some driver issues with my mt4g too.
Try this:
Download USBDeview - http://www.nirsoft.net/utils/usb_devices_view.html
Download the drivers for your phone from HTC - http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
Run USBDeview AS ADMINISTRATOR. List all drivers in alphabetical order. Remove any and all associated with your mytouch 4g.
Reinstall drivers via HTC Sync software. Please let me know how this works for you.
Try to connect the phone with both the SD and SIM cards removed.
well guys im still having issues connecting via USB... but...
I found something to let me connect to ADB via WIFI so using it I got everything pushed and I am now S-off... so I am extremely pleased... that said i would "like" to be able to plug in and mount the sdcard/run adb but if I cant i can deal with my work arounds...
Hi experts,
Thanx to the experts on this forum, I managed to flash HyperDroid 2.3.4 NAND ROM on my HD2. Its working fine.
But, when I connect my HD2 to my Vista laptop via USB, my laptop cannot find the required drivers to connect . I am not interested in syncing ... just able to transfer files between PC and sdcard on HD2.
I tried to search this forum for an answer ... but, could'nt fine one.
Also, any recommendations for a good anti-virus for my HD2 will be appreciated.
Thanx.
cheers,
- manish
Mhh, didnt remember if i required a driver to getbtge mass storage working...
Off topic: vista is after windows me the worst os ever
Google usb drivers are in this package...ignore adb, fastboot.exe..just picked up the package from the clk thread. Im on my way to work, so this was the best solution to help as fast as possible
http://www.multiupload.com/9R0KMRJ5X0
You have to manually install them over the device manager.
Hope this helps.
Sent from my HTC HD2 using XDA Premium App
Simple answer, Windows 7
Sent from my HTC HD2
how long have you been using android? because the simple answer is in notification area if you already haven't tried, drag notification bar down and turn usb storage on
i might be wrong but i dont think i needed driver update and what not when i flashed HyperDroid. uh.. have you tried all the ports on your laptop? i found that sometimes this seems to fix problems like this. im taking by what you said this is your 1st Android ROM you tried? if not then was it working before and if so then you could always try another ROM as well to see if it would fix the problem.
Thanx j4n87 ... I downloaded the Android USB driver from the HTC developer site, and installed it on my Vista laptop via device manager. It works. I can transfer files between my Android HD2 and Vista laptop.
cheers,
- manish
htccraze said:
i might be wrong but i dont think i needed driver update and what not when i flashed HyperDroid. uh.. have you tried all the ports on your laptop? i found that sometimes this seems to fix problems like this. im taking by what you said this is your 1st Android ROM you tried? if not then was it working before and if so then you could always try another ROM as well to see if it would fix the problem.
Click to expand...
Click to collapse
+1 there's no need to drivers for access to usb storage