Anyway to manually get the drivers for it? I can't find them and I can't sync my device to my computer. Windows Mobile Device Center won't work at all, it doesn't recognize my HD2 and it says the driver installation fails.
Can someone help me out please? Thanks
Windows Mobile Device Centre was all I never needed on my win7 x64. I installed the program before inserting the HD2 though. Obviously make sure you have the program up and running before plugging in the HD2 and selecting activesync on it; It should load up. You could uninstall the driver (from device manager) and start again if all else fails.
What if it does not?
Started doing that "cant recognize" issue while installing NAND (at the radio installation process -r: 2.15., compatible)
Figured to go to stock WinMo with SDCard, but it still cant..
Faster data sync disabled, after that it tried to install the drivers again, but says it fails...
Gotta go to ms and install the updated win mob dev c. The one that ships needs updating.
Also, once you are into the android side of things you should open wmdc, connection settings, and turn off allow usb connections, and install the android usb drivers.
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
thekillingroad said:
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
Click to expand...
Click to collapse
Replace your USB Cable and Thats ALL !
i had the same problem....i am for now using windowx xp
aks777 said:
i had the same problem....i am for now using windowx xp
Click to expand...
Click to collapse
I have been using it win 7 64 bit since the beginning. and I never have a problem with the driver.
Try redownload and reinstall Windows Mobile Device Center from Microsoft website.
Only connect your device after the driver has been properly installed.
in device manager delete usb controller after software installation.
Thanks to ALL, but changing the USB cable, so sure that's ALL? =)
I'm not gonna mention that I've written that I've tried it with many computers and many cables. =)
The phone is sent to HTC and they told me that they ordered a new mainboard.
Hope doesn't take too much time. My Service Provider gave me a Galaxy 7500.. Cupcake, no market.. arrrgh!
Thinking of buying an iPhone and selling it after two weeks but that's gonna cost me $200 loss in two weeks. too much =)
As doing some thinking.. the device cannot "introduce" itself to the computer. I couldn't find a more sense making answer.
If you've tried hard-resetting, cable and PC changing, if it's still not working, then there should be a problem about the phone, mostly about the mainboard.
I suggest anyone having that problem go make your phone check at a service, of course if you have warranty. =)
Related
Hi all,
It's been a while, but I am back with HD2. I have a problem. I have win7 business on all off my computers, I instaled latest activesync, but I keep getting error connection. When installing drivers, I get the unknown device, so instalation failed.
Not even bluetooth recognition works.
Any suggestions, please?
vid200 said:
Hi all,
It's been a while, but I am back with HD2. I have a problem. I have win7 business on all off my computers, I instaled latest activesync, but I keep getting error connection. When installing drivers, I get the unknown device, so instalation failed.
Not even bluetooth recognition works.
Any suggestions, please?
Click to expand...
Click to collapse
If you are using Windows 7 Business, I would guess you mean you are using Windows Mobile Device Center, yes? In Windows Device Manager are you set up to automatically download drivers? Are you getting any errors in the Sync Center? There is a lot of information you have to supply before anyone can troubleshoot the problem you are having.
There are a lot of steps you can take, most of which you can find by doing a search of XDA. If that fails, then come back with a more detailed explanation of what you have done, and people will try to help troubleshoot for you.
Thanks for looking,
and yes I have been searching a lot for information allready before I made a new thread.
I have win7 business and yes it does download drivers automaticly.
I will try and search for manual driver setup, but would be very thankful if any of you could give me some hints.
vid200 said:
Thanks for looking,
and yes I have been searching a lot for information allready before I made a new thread.
I have win7 business and yes it does download drivers automaticly.
I will try and search for manual driver setup, but would be very thankful if any of you could give me some hints.
Click to expand...
Click to collapse
In Device Manager you can click on Portable Devices and see if you see your HD2 there, if you do, then right click on it. You can find options to manually install drivers. If that does not work, in the Mobile Device Center you can configure how the center is supposed to connect to your HD2. Have you tried that yet? Also, make sure you are not using a USB hub for connections. You can try changing USB ports to try to reinstall drivers.
I am trying hard, this is the error I get:
P.S.: in activesync all options are on, so no problems there, but I have tried all of them.
In that case, try uninstalling the device in Device Manager, and starting over again. It does seem to be a driver problem. Another trick you can try is on the HD2, under Settings, USB to PC, try unticking Enable advanced network functionality, and then try to reinstall the drivers.
Another thing you can try is deleting the partnership in Windows Mobile Device Center and creating a new partnership.
Is there a wa I could find the driver somewhere and install it myself?
Not beeing able to find the right one...
vid200 said:
Not beeing able to find the right one...
Click to expand...
Click to collapse
In the Leo ROM forum the thread on MTTY has some Windows 7 drivers you can download I believe, but that will take awhile.
Are you using Win7 32 or 64 bit?
win7 32 bit. I tried to download them through windows update, but I got an error as well.
So I am on a quest for drivers....
vid200 said:
win7 32 bit. I tried to download them through windows update, but I got an error as well.
So I am on a quest for drivers....
Click to expand...
Click to collapse
If you are familiar with computers, you can try this with Win7 drivers you download for HD2.
You did try uninstalling your device in Device Manager, and trying another USB port to install it on? It seems really odd that Win7 is not finding the right drivers for you, and that persists even after you uninstall and reinstall the device.
No luck so far, any more ideas?
Update:
I tried the same thing on another laptop, same specs, same win7 business, worked like a charm.
So must be this win7 problem I think. Any ideas what to do? I can't remove mobile device center, so I could try and reinstall it. The icons stay in my control panel.
Anybody?
I just can't imagine this is only happening to me.
vid200 said:
Anybody?
I just can't imagine this is only happening to me.
Click to expand...
Click to collapse
Did you have any luck yet in solving the problem?
Nope my dear helper,
I found out this is windows7 problem. I still get the first error can't install device driver, because the device is not installed on the computer.
Something must be wrong, but I was getting a head, network driver installed fine, windows mobile device program runs fine, I made a clean install with register delete etc...
I just can' seem to find this to work.
i had some problem the first time i plugged my HD2 on win7 64 ultim.
nothing happened, no activesync, no nothing...
i opened sync center, nothing...
windows updates found me windows mobile device center with upgrade devices, the thing installed but all still worked bad, impossible to activesync, no driver for my HD2, and i know nothing about phones and windows, it's my first windows mobile.
so after hours of fighting, i decided to DL the app windows mobile device center on microsoft download website, then i installed the thing and oh miracle, my HD2 was detected, the app Win M D Center was asking me now with the pic of my hd2 in the prog to chose between settings as the first thing installed by windows update always froze at win mob device center splash screen...
i resume here but it took me the all afternoon to finally resolve this problem.
something went wrong with windows update install and to reinstall the all app was the easy way to fix the activesync problem.
If you did already re-download Windows Mobile Device Center and that did not work on the one recalcitrant computer, maybe you might need to update your BIOS or download the latest drivers for you motherboard. Sometimes problems can crop up if the computer does not have the most updated BIOS and motherboard drivers. How old is the computer you are using?
Well, after calling microsoft support and HTC support and doing for 36 hours nothing but trying I finally reinstalled my hole system. So new clean install of windows 7 business and it works like acharm. Where did it went wrong, I don't know, there had to be some register issue I think. Windows mobile center worked ok, the connection with the phone worked, but just not recognizing the device. Well I would of done the instalation sooner, If I knew this one is gonna be so hard to do.
vid200 said:
Well, after calling microsoft support and HTC support and doing for 36 hours nothing but trying I finally reinstalled my hole system. So new clean install of windows 7 business and it works like acharm. Where did it went wrong, I don't know, there had to be some register issue I think. Windows mobile center worked ok, the connection with the phone worked, but just not recognizing the device. Well I would of done the instalation sooner, If I knew this one is gonna be so hard to do.
Click to expand...
Click to collapse
Well, glad you finally solved your problem, and that this time the blame was not just placed on HTC or the Leo. Sad though that you had to go through so much to get the darn thing to work. I just installed a new operating system for my neighbor, and there is still more work to do on it. Not a fun thing to do.
I've been trying to get anything to recognize my Hero on my PC for the past few days.
What I've tried:
Installing HTC Sync
Installing Android SDK
Installing the HTC HERO DIAG drivers
Doing ##DIAG# and not doing it.
...And all different combinations of those. The problem is I can't get QPST, CDMA Workshop, UniCDMA, or QXDM, etc to recognize it. The Hero synced to the HTC Sync a couple times, but nothing else. It won't even assign a COM port on the computer.
The phone is also rooted, which, I wouldn't think would make much difference, but I'm running out of ideas here.
Any help is really appreciated.
Did you install the regular HTC drivers ? Go to your device manager and see if it says android phone when its plugged in if its there tell it to update driver and point it to the folder called HTC drivers located in the HTC sync program directory.
I tried to do that but the driver wizard said that it could not find any drivers that were better than the ones already installed. (or something to that effect)
EDIT: Ah! I don't know what happened but it appeared on COM5 as "HTC Diagnostic Interface". That may be what I needed. We'll see.
I get the same thing, says "Windows has determined the driver software for your device is up to date."
"HTC Dream Composite ADB Interface" <--???
Exactly the same for me.
Device not recognized, Remove and reinstall HTC Sync and manually selecting drivers, Device wiping and trying again, using a different USB port, using a different cable, reinstalling windows!!!!!, using a different computer, Pulling out my hair!!!!!
Nothing works!!!
However, It did used to ask for mounting and unmounting the SD when plugged in but it has NEVER found HTC sync on my PC.
Now, all I get is Charging battery on the Hero and device not recognized on the PC.
Device manager politely tells me "Windows has stopped this device because it has reported problems. (Code 43)"
My system is Windows 7 X64 and my Hero Has run both the shipped ROM and now a cooked 2.1.
Please help me!
I have never been able to sync my Hero on any of my Win7 machines. I have been able to sync sporadically with my work XP Pro SP3 machine though. However, since flashing the AOSP 1.6 rom, HTC sync isn't recognizing my phone anymore. I can however mount the SD card.
Problems connecting Evo to PC
Same problem, but on EVO... Anyone ever figure it out??
I should elaborate I suppose lol... Everything *worked* fine, and then suddenly, appearantly for no reason, it just stopped... Device manager now calls the HTC diag driver an unknown usb device and gives the same warning message as above. And when I try to update the driver, gives the same message about it being up to date...
I have not been able to get ADB to work on my phone since the first time I flashed 2.2, when plugged in it will do the "do you want to turn on usb storage" message and it works fine.
You all might want to try installing the android adb drivers. Its a well know issue with the htc drivers. If you click on my avatar and go to my post you can find my thread on how to install adb on windows 7 32/64 and xp. Adb works fine for me and sync as well. The adb drivers might help out. Well good luck.
Edit: Running Aosp's 3/26 gb build RA1.7 Jason m's 806 kernel kifno build prop tweak -mp
Yea it's Me Again With The
Modified Hero
Tramline said:
Exactly the same for me.
Device not recognized, Remove and reinstall HTC Sync and manually selecting drivers, Device wiping and trying again, using a different USB port, using a different cable, reinstalling windows!!!!!, using a different computer, Pulling out my hair!!!!!
Nothing works!!!
However, It did used to ask for mounting and unmounting the SD when plugged in but it has NEVER found HTC sync on my PC.
Now, all I get is Charging battery on the Hero and device not recognized on the PC.
Device manager politely tells me "Windows has stopped this device because it has reported problems. (Code 43)"
My system is Windows 7 X64 and my Hero Has run both the shipped ROM and now a cooked 2.1.
Please help me!
Click to expand...
Click to collapse
more than likely it is your usb cable has been damaged.
i had the same problem, i went to my provider and got a new usb cable for it. (they gave it to me for free, no questions) no more problems at all, works like a charm.
i still have the old cable too, it will not recognize the hero on the computer. in fact if i plug the cable in without the phone, the cable itself actually comes up and says unrecognized device. but it works great for charging.
Hi,
I have a XV6900 (and I just registered on this site as well ), and it has the WM6.1 loaded on it. I wanted to put the NFSFans WM6.5 as the OEM ROM is too bloated.
I have 2 problems:
1) I have got windows-7 64 bit.
2) I am using some camera MicroUSB to USB cable.
I can see my Phone in the "My Computer", but the Windows Mobile Device Center does not recognize the device. Is this because I am not using the cable that came in the box?
Has anyone used windows 7/vista 64 bit to flash and update ROM?
Any help would be GREATLY appreciated.
rvgsd said:
Hi,
I have a XV6900 (and I just registered on this site as well ), and it has the WM6.1 loaded on it. I wanted to put the NFSFans WM6.5 as the OEM ROM is too bloated.
I have 2 problems:
1) I have got windows-7 64 bit.
2) I am using some camera MicroUSB to USB cable.
I can see my Phone in the "My Computer", but the Windows Mobile Device Center does not recognize the device. Is this because I am not using the cable that came in the box?
Has anyone used windows 7/vista 64 bit to flash and update ROM?
Any help would be GREATLY appreciated.
Click to expand...
Click to collapse
My primary box is Win 7 x64 and I've had no trouble with ROM flashing.
How does it show in device manager?
For me, it shows "error" inside the device manager, thats it. But I can access trhough it my computer. Also if I could install the .Net Framework 3.5 from the PC to computer, when I ran the executable, it detected the phone. The device manager doesnt recognize it, and nor does the unlocker..
any ideas??
rvgsd said:
For me, it shows "error" inside the device manager, thats it. But I can access trhough it my computer. Also if I could install the .Net Framework 3.5 from the PC to computer, when I ran the executable, it detected the phone. The device manager doesnt recognize it, and nor does the unlocker..
any ideas??
Click to expand...
Click to collapse
Plug in the phone. Go in to device manager, right click and uninstall. Check the box about deleting the driver if it shows. Uninstall wmdc. Reboot. Install wmdc. Plug in the phone. Good luck!
Sent from my Full Android on Vogue using XDA App
Tried uninstalling from Device managed, uninstalled WMDC, rebooting and reinstalling. Didnt work, still it shows error in WMDC. I have atttached the screenshot. I am starting to think I will have to live with the OEM WM 6.1...
rvgsd said:
Tried uninstalling from Device managed, uninstalled WMDC, rebooting and reinstalling. Didnt work, still it shows error in WMDC. I have atttached the screenshot. I am starting to think I will have to live with the OEM WM 6.1...
Click to expand...
Click to collapse
Isn't there a special set of drivers that need to be installed under W7 x64? If you can, get a hold of an XP machine.
I install1ed the WMDC 6.1 driver, which also installs the WMDC. After the installation, I can see 2 entries in the add/remove programs, one for driver and one for software, so I guess thats not the problem.
I wish I had a XP machine..!
rvgsd said:
Tried uninstalling from Device managed, uninstalled WMDC, rebooting and reinstalling. Didnt work, still it shows error in WMDC. I have atttached the screenshot. I am starting to think I will have to live with the OEM WM 6.1...
Click to expand...
Click to collapse
I KNOW this works, I flash a couple times a week (ORD, you know )
Looked at the screenie - it shouldn't say htc sync. I assume, at some point, you loaded the htc sync software?
I attached a screenie of my wmdc about. does it match yours? wish I had my winmo vogue here today...
Wow.you are lucky it works..! I am stuck with this..real bad!
I checked, its the exact same version number of WMDC, and the device ID is different..
Also, I never installed any HTC software..I dont even know that HTC sync exists..!
any more suggestions..??
Also when I install the WMDC, it alsways says "device not plugged in" while installing the driver, and driver install failed. This happens even when the device is plugged in..
Thanks for your help!
rvgsd said:
Wow.you are lucky it works..! I am stuck with this..real bad!
I checked, its the exact same version number of WMDC, and the device ID is different..
Also, I never installed any HTC software..I dont even know that HTC sync exists..!
any more suggestions..??
Also when I install the WMDC, it alsways says "device not plugged in" while installing the driver, and driver install failed. This happens even when the device is plugged in..
Thanks for your help!
Click to expand...
Click to collapse
I'll take a look with my other (winmo) vogue, have the android one with me today... may be a day or two before I can post back.
appreciate you trying to help..!
I was wondering if any of you had tried connecting the xv6900 with some random USB cable instead of the one that came with it..maybe thats the problem!
rvgsd said:
I was wondering if any of you had tried connecting the xv6900 with some random USB cable instead of the one that came with it..maybe thats the problem!
Click to expand...
Click to collapse
I have had issues with cables before, also, try changing the USB port... this helps at times.
rvgsd said:
I was wondering if any of you had tried connecting the xv6900 with some random USB cable instead of the one that came with it..maybe thats the problem!
Click to expand...
Click to collapse
Yes, I have... but egzthunder has a good point about the USB port.
Sent from my Full Android on Vogue using XDA App
I have been all over the internet, and I honestly can not find a solution to this problem anywhere. Like, literally, anywhere.
MY hd2 (And other people's) will not connect tot he computer via usb.
Zune software will just not acknowledge that my hd2 is plugged in.
I've tried everything, and my sd card is compatible.
Does anybody have an idea on how to get this fixed?
Using XBoxmod's newest rom
theflduck said:
I have been all over the internet, and I honestly can not find a solution to this problem anywhere. Like, literally, anywhere.
MY hd2 (And other people's) will not connect tot he computer via usb.
Zune software will just not acknowledge that my hd2 is plugged in.
I've tried everything, and my sd card is compatible.
Does anybody have an idea on how to get this fixed?
Using XBoxmod's newest rom
Click to expand...
Click to collapse
Try this
http://www.nirsoft.net/utils/usb_devices_view.html
go there and download a great wee program called USBDeview, run it as admin!
and basically delete anything that could be related to the phone
what that program does is gives you a list of all installed or previous installed USB devices, sometimes USB devices can "hangup" if the wrong driver or an conflict developes, ive used this before to fix a similar situation and it works great.
The reason i think this may be the problem is i had a similar problem in that my phone would only conect to zune when i use a particular USB port, i used a different one on the same HUB and all was well, so i cleared down all the crap using that program and all is now ok!
it will mean having to install any device you delete so i would suggest you disconnect all USB devices first then pull the drivers off for anything related to phones then reconnect anything you need one at a time.
ifd in doubt drop a list of all the devices on that program and ill go through them with you
Thanks so much. I just swiched back to android and i will install wp7 and try this again.
Do you have windows mobile device center 6.1 installed with active sync working?
Have you considered trying a different usb cable? It might be possible the cable is bad. Also maybe try connecting it to another computer to see if it recognizes it.
would be great for an update if you have had any luck on not, other folk are asking teh same question
Sorry i havent gotten back to you guys...
I tried the first post, did not work.
The cable is fine, I use it in android and to charge.
Other computer is not an option for me...
OTher usb ports were a no-go
I tried different roms and everything.
I'm beginning to just want to give up
*Edit: No, active sync isnt installed should i try it?
See if you have libusb installed and if so uninstall it and see what happens. I read somewhere on the net a few days ago that it solved peoples problems that couldn't connect to zune.
theflduck said:
Sorry i havent gotten back to you guys...
I tried the first post, did not work.
The cable is fine, I use it in android and to charge.
Other computer is not an option for me...
OTher usb ports were a no-go
I tried different roms and everything.
I'm beginning to just want to give up
*Edit: No, active sync isnt installed should i try it?
Click to expand...
Click to collapse
no active sync will just confuse things,
you didnt mess about with some of the HTC tools did you?
So you've uninstalled all the devices that teh USBDeview program showed you yeah? i had quite a few phone related devices, just get rid of them all, they will install again when you need them, have you tried using a different USB port, swap it with something else to be sure, try USBDeview again but this time also remove all of zune and everthing else youve installed for WP7, lets go back to the begining and se if there is something thats got messed up
Tanks. Will give it a try
Hi everybody,
I hope you can help me because I really can't find the solution:
When I connect my HD2 WP7-device to my computer it charges, but isn't recognized.
- Zune won't start automatically and won't find any device.
- Device Manager doesn't show any unknown device or something that could be my phone.
What I have tried so far:
- Used a XP3 and W7 x64 machine (also ones without any history with a WP7-phone)
- Used a lot of different cables
- Used a lot of different USB-ports
- reinstalled WP7
- reinstalled zune
- (de)installed activesync
- I'm not sure, but first I had a dual-boot solution with Android and I recall USB also didn't work there.
I started to think the USB-connection of my phone might be broken, but when I use MAGDLR, the USB works as mass storage and I can also use the USB flasher. The Bootloader also works, so I tried the following:
- (using bootloader) restored the HD2 in its original state with a official stock ROM and original (locked) HSPL
- Installed a Android ROM: the USB also does NOT work with WM6.5 or Android.
Does anyone know anything I can try now? And Yes, I have read all of the threads of other people with USB-issues and the MS-solutions, but none of them had the solution for me...
Coffee-donation for whoever has the golden tip
Hello guys, I don't mean to hijack the thread, but I am facing a similar issue.
I installed the LEO70 ROM on my HD2 when it first came out, and forgot all about it. I now want to install the NoDo (7932) update to test it out (and maybe move permanently to an Android ROM eventually when I decide I don't like it). I am facing an issue; I want to upgrade my MagLDR to 1.13 (from 1.12) and ROMUpdateUtility doesn't recognize my phone, giving me the 'Error 260 - Connection' error.
I did remove Windows Mobile Device Center a month or two ago... could this be the problem? I have the latest Zune software installed on my Windows Server 2008 R2 SP1 (x86-64) machine, and when I plug in the phone, Zune automatically starts and recognizes my phone, telling me there's a phone update available (from February that I need to install to enable future updates). I know it will kill my phone, so I won't install it. Also, USBMassStorage mode works nicely.
Any ideas?
Hi sclip,
I don't mind if you try to find an answer to your problem too, but it seems like a different one, because mine does work in bootloader/magdlr-mode.
BTW. I just installed the stock WM6.5 Rom of HTC, and USB still doesn't work! Can it be the radio of hardSPL or is it just broken?
****, after installing the stock WM6.5, it won't install another Radio/MAGDLR using bootloader, it stucks at the 0%.
I think I might haved destroyed my HD2
Daanmannetje said:
****, after installing the stock WM6.5, it won't install another Radio/MAGDLR using bootloader, it stucks at the 0%.
I think I might haved destroyed my HD2
Click to expand...
Click to collapse
remember to HSPL it once you have installed your original Stock rom
dazza9075 said:
remember to HSPL it once you have installed your original Stock rom
Click to expand...
Click to collapse
That did the trick, thanks. To bad it didn't help my USB problem...
since youve tried just about everything else try this
try using USBDVIEW and delete all the USB drivers
also install it on a different PC that hasnt had WP7 connected to it before
to continue with fault testing will requirer us to rule out the PC or the phone, at the mo it could be anything.
since you have Windows 7 install the XP virtual machine and use that, i believe the VM now supports pass through on USB so it should work, i have an old IrDA adaptor that wont install on my w7 PC but it will on the XP VM
dazza9075 said:
since youve tried just about everything else try this
try using USBDVIEW and delete all the USB drivers
also install it on a different PC that hasnt had WP7 connected to it before
to continue with fault testing will requirer us to rule out the PC or the phone, at the mo it could be anything.
since you have Windows 7 install the XP virtual machine and use that, i believe the VM now supports pass through on USB so it should work, i have an old IrDA adaptor that wont install on my w7 PC but it will on the XP VM
Click to expand...
Click to collapse
Thanks for the USBDVIEW-tip, quite a nice piece of software! However it didn't help me with my problem. Using a computer which never had WP7 connected before didn't help either...