Related
I recently bought a MyTouchHD.
Went through the entire s=off process which i did correctly.
But when i boot into Bootloader (HBoot) screen i get a message of "no image or wrong image".
I did flash Clockwork, and i can reboot into Recovery or HBoot. but that "no image or wrong image" kinda has me worried, but everything else works perfectly. ... anyone know anything about it?
I tried using DDMS to screen shot it but it wont work for one reason or another.
where is the error popping up at?
Is it trying to load a.img file in Hboot? Maybe try deleting it?
crypysmoker said:
where is the error popping up at?
Is it trying to load a.img file in Hboot? Maybe try deleting it?
Click to expand...
Click to collapse
The error is at the very beginning of the HBoot start up process. It scrolls through several options then says the error message. I'll have to video and upload it via you tube so you can see.
after you did the s-off were you trying to flash a zimage to do overclocking by chance? if so, you might have removed the stock image for the OS to boot correctly. the stock image needs to match the stock bcm4329.ko file and vise versa for OCing. its just a thought. hope this helps.
Please post questions in Q&A section.
aznpr1de808 said:
after you did the s-off were you trying to flash a zimage to do overclocking by chance? if so, you might have removed the stock image for the OS to boot correctly. the stock image needs to match the stock bcm4329.ko file and vise versa for OCing. its just a thought. hope this helps.
Click to expand...
Click to collapse
No i didn't flash any files. I was just trying to PermaRoot the phone, to be honest about it.
neidlinger said:
No i didn't flash any files. I was just trying to PermaRoot the phone, to be honest about it.
Click to expand...
Click to collapse
hmm thats kinda weird you might have had a corrupted file during the root process then. thats the only explanation i can think of. on the hboot screen you do show s-off on the top correct? if so than technically everything should be fine. if you can fully boot the phone up, download terminal from the market, install it, the there should be a $ sign, then type su then press enter, a message should pop up asking permission, accept it, it should change to a # sign, if it does then you have root access. just to be sure reboot the phone and do it again to make sure that root sticks.
aznpr1de808 said:
hmm thats kinda weird you might have had a corrupted file during the root process then. thats the only explanation i can think of. on the hboot screen you do show s-off on the top correct? if so than technically everything should be fine. if you can fully boot the phone up, download terminal from the market, install it, the there should be a $ sign, then type su then press enter, a message should pop up asking permission, accept it, it should change to a # sign, if it does then you have root access. just to be sure reboot the phone and do it again to make sure that root sticks.
Click to expand...
Click to collapse
Yea. i have full root access. and S=off.
Okay well then i guess i need not to worry about it.... If you guys are thinking everything is okay.
Your phone is searching the sd card for an update image, it is nothing to worry about.
Sent from my Desire HD using XDA App
dbiggss said:
Your phone is searching the sd card for an update image, it is nothing to worry about.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
very possible since the first thing i did was rip out their class 2 card and kept my class 6 card. I guess i'll boot into Linux and look for a file to transfer over.
dbiggss said:
Your phone is searching the sd card for an update image, it is nothing to worry about.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
This is correct. You don't need to worry about finding a file to put on there or anything. Hboot does this everytime you boot into it regardless of you. It is automatically looking for an update or diagnostic file to load and/or flash that isn't needed for the phone to function properly. Its an error but not one that you need to worry about unless you go to manually update through hboot, place a file for the update named PD15IMG.zip on your sd card, and it still gives you the error.
My MyGlacier 4G MINE!!!
I have a bricked mytouch 1.2 with RADIO:2.22.23.02
SPL:13.33.0013 i cant access recovery and get bootloops ...i can however access fastboot/hboot... i used the sappimg.zip trick to get back to cupcake..but my phone just wont read it...it says NO IMAGE u
nder SAPPIMG.zip while trying to flash in hboot...any help...a little tight in money cant afford another phone at the moment..thanks..
Make sure that the sappimg isn't sappimg.zip.zip. &o to Control Panel-Folder Options-Uncheck the box that says "Hide known file extensions". If that's good, then format the card and copy the file back over. Make sure you backup your pictures and stuff since the format will erase the card.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Pancake Modz said:
I have a bricked mytouch 1.2 with RADIO:2.22.23.02
SPL:13.33.0013 i cant access recovery and get bootloops ...i can however access fastboot/hboot... i used the sappimg.zip trick to get back to cupcake..but my phone just wont read it...it says NO IMAGE u
nder SAPPIMG.zip while trying to flash in hboot...any help...a little tight in money cant afford another phone at the moment..thanks..
Click to expand...
Click to collapse
If you can access the bootloader then you're not bricked.
Imagine powering on your phone and you can't access the bootloader, recovery and your phone won't even boot at all. That's a real brick.
i had this problem last night trying to install gingerbread from yoshi i`ve flashed phone`s radio and hboot , to those versions that was recommended but after I started rom first time my phone started to restart itself , just like a bootloop , but my luck was that i had goldcard with a saphire.zip on it and it worked perfectly for me.I`ve notice that this SPL is locked and that`s why you can`t access recovery.hope this helps.cheers
use the guide in my sig it will help you
DonJuan692006 said:
Make sure that the sappimg isn't sappimg.zip.zip. &o to Control Panel-Folder Options-Uncheck the box that says "Hide known file extensions". If that's good, then format the card and copy the file back over. Make sure you backup your pictures and stuff since the format will erase the card.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
did both maybe its a bad sappimg.zip file can anybody hook me up with a link?
Link.
hmmmmmmmm very very intersting....i used that same file.....wtf
Pancake Modz said:
hmmmmmmmm very very intersting....i used that same file.....wtf
Click to expand...
Click to collapse
I would still try downloading it again. Your not putting the file inside any folders on the SD card, correct?
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
DonJuan692006 said:
I would still try downloading it again. Your not putting the file inside any folders on the SD card, correct?
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
no im not.... weird thing is ive used sappimg before....i will try it again....
Pancake Modz said:
no im not.... weird thing is ive used sappimg before....i will try it again....
Click to expand...
Click to collapse
is your problem fixed?
no it did not fix i have been getting by on my old razor i havnt messed with my mytouch in a couple weeks now...never did fix that thing
Try formatting your SD card and then running the sappimg again. Make sure you backup anything you want to keep from your SD card. Format to FAT32 default block size if you do it in Windows.
Sent from my HTC Glacier using Tapatalk
Im sorry ...I know am extremely inconsistent with my posts ..im sorry... but heres an update...ive got the SAPPIMG on the sd card...it finds it and installs it and everything then when i reboot...BOOM!...Bootloops!
Well...I Guess this problem is completely Unfixable-.-...
I think you need to boot into bootloader AFTER you do the SAPPIMG thing, then install a RUU, and from then you can fix it. No?
Im having the same issue.I got another sappimg.zip other than the one from theunlockr but when I try and flash it, it hangs up on unzipping the system. My computer recognizes the phone but adb will not. Im lost....
RUU?????????????
I was sooo happy when I finally got SAPPIMG.zip to be read by the phone...then I still cant access Recovery...i do not have a gold card ....and i do not know what a RUU is....
I finally got mine up and running with cm. You need to flash Amon RA's recovery...then you will be able to get into recovery. Check out cyanogenmod's wiki. They have a good write up and the links are good.
Sent from my Desire HD using XDA Premium App
I tried to use RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed on my Sprint EVO 4G to rollback, but after reboot every thing stopped..
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041F
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.09.88
Note: Both screens are attached.
Urgent help please?
Your phone is still s-off. You need to flash the unrevoked s-on tool first then run the ruu.
Sent from my PC36100 using XDA App
Dear Rem3Dy
Thank you for reply, can you give me any tutorial link or guidance to to so? I meant "unrevoked s-on tool"?
Thanks
is there any other hep please?
Let me explain in more detailed:
When power on (even after removing battery) I cannot log-in to HBoot through Volume Down+Power buttons.
Just a big HTC in a middle of black screen rounded in each corner an exclamation mark.
Then when plug my PC-USB and unplug below information showing up:
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041F
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.09.88
Thanks for any support or guidance
jab2k said:
is there any other hep please?
Let me explain in more detailed:
When power on (even after removing battery) I cannot log-in to HBoot through Volume Down+Power buttons.
Just a big HTC in a middle of black screen rounded in each corner an exclamation mark.
Then when plug my PC-USB and unplug below information showing up:
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041F
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.09.88
Thanks for any support or guidance
Click to expand...
Click to collapse
On the unrevoked site under the EVO guide they link you to the download. There are plenty of guides on this forum so I am not going to do the work for you. This is why you should do the research before attempting to brick your 500 dollar phone.
Sent from my PC36100 using XDA App
If you can't get into the bootloader, you can't get into recovery which is where you need to flash the s-on tool. Try running the RUU in exe form from your computer. If it works, you will need to reflash recovery, flash the s-on tool, then run the RUU again.
Sent from my PC36100 using Tapatalk
plainjane said:
If you can't get into the bootloader, you can't get into recovery which is where you need to flash the s-on tool. Try running the RUU in exe form from your computer. If it works, you will need to reflash recovery, flash the s-on tool, then run the RUU again.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Yeah now that I see the pics that doesn't look good.
Sent from my PC36100 using XDA App
Put these files in the root of your SD card.
Amon RA and S-on tool
When you get into Hboot it should find this PC36IMG.zip and ask to run it. Run it. This will install Amon RA recovery onto your phone.
Then turn the phone off and reboot holding vol-down and power. Select recovery.
In recovery select "flash zip from sd" then select unrevoked-forever-son.zip
At this point find someway to get Pc access to your sd card again. You can do this from Amon RA by selecting USB mount (i forget the exact wording, sorry).
Delete the PC36IMG.zip and put this one on there instead. Go back to Hboot and let the PC36IMG run.
You should now be running stock again. Unrooted.
This thread might be of some help as well.
There is no recoginition
rstuckmaier said:
Put these files in the root of your SD card.
Amon RA and S-on tool
When you get into Hboot it should find this PC36IMG.zip and ask to run it. Run it. This will install Amon RA recovery onto your phone.
Then turn the phone off and reboot holding vol-down and power. Select recovery.
In recovery select "flash zip from sd" then select unrevoked-forever-son.zip
At this point find someway to get Pc access to your sd card again. You can do this from Amon RA by selecting USB mount (i forget the exact wording, sorry).
Delete the PC36IMG.zip and put this one on there instead. Go back to Hboot and let the PC36IMG run.
You should now be running stock again. Unrooted.
This thread might be of some help as well.
Click to expand...
Click to collapse
Sorry, it doesn't worked either.. it didn't recognize SD card to check for PC36IMG.zip.. just bypass it..
plainjane said:
If you can't get into the bootloader, you can't get into recovery which is where you need to flash the s-on tool. Try running the RUU in exe form from your computer. If it works, you will need to reflash recovery, flash the s-on tool, then run the RUU again.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Yep, I agree with you.. its the only thing that my phone is recognizing, but which version should i use?
I used
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed with my Windows 7 Ultimate, but after 100% installation it shows Error 152.. trying to find out best version, but there are no much document about..
Any idea please?
jab2k said:
Yep, I agree with you.. its the only thing that my phone is recognizing, but which version should i use?
I used
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed with my Windows 7 Ultimate, but after 100% installation it shows Error 152.. trying to find out best version, but there are no much document about..
Any idea please?
Click to expand...
Click to collapse
That's the correct one. Just try running it again, and again, and again if you have to. If it still won't work, you can try another one, but try the newest one first. You can also try taking it to Sprint and just play dumb. They may replace it for you.
Sent from my PC36100 using Tapatalk
Also make sure you have the correct drivers. Install HTC Sync then uninstall it, then try again. After some research, it seems the screen you're seeing is from a bad RUU flash, so completing the RUU should solve your problems.
Sent from my PC36100 using Tapatalk
This is really sad, nothing worked for me. All above suggestions have been tried but nothing working.
I am not sure is it MS Windows issue, if yes, is there any Linux or MAC tool to allow me log in to my ROM and reset or copy from original one?
rstuckmaier said:
Put these files in the root of your SD card.
Amon RA and S-on tool
When you get into Hboot it should find this PC36IMG.zip and ask to run it. Run it. This will install Amon RA recovery onto your phone.
Then turn the phone off and reboot holding vol-down and power. Select recovery.
In recovery select "flash zip from sd" then select unrevoked-forever-son.zip
At this point find someway to get Pc access to your sd card again. You can do this from Amon RA by selecting USB mount (i forget the exact wording, sorry).
Delete the PC36IMG.zip and put this one on there instead. Go back to Hboot and let the PC36IMG run.
You should now be running stock again. Unrooted.
This thread might be of some help as well.
Click to expand...
Click to collapse
You Sir are a great man!! Thank you
Nothing working, I'd many tests, still nothing.. and many RUU tested:
RUU_SuperSonic_S_Sprint_WWE_3.26.651.6_Radio_2.15.00.07.28_NV_1.71_003_release_147044_signed.exe
RUU_SuperSonic_S_Sprint_WWE_3.30.651.2_Radio_2.15.00.09.01_NV_1.77_003_release_154209_signed.exe
RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15.00.09.01_NV_1.77_003_release_157088_signed.exe
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe
Furthermore more than ten times HTC Sync driver removed and re-installed.. nothing working properly..
I'm just wondering best way to re partitioning original ROM?
thanks for any help
Minor suggestion: try running the RUU as administrator by right clicking > Run As Addministrator.
Had the same problem. When you start to run the ruu are the ruu and your phone the same file. For example right before you start to run the ruu, what does that screen show
Jab2k, you might have a bad copy of the ruu. It locks you in ruu mode like that when you have an incomplete flash but once you get a good one it will be back to normal.
If redownloading the 3.70 ruu doesnt fix it you will need to flash it manually using fastboot to see where it is going wrong
Sent from my PC36100 using XDA Premium App
Legendary20 said:
Had the same problem. When you start to run the ruu are the ruu and your phone the same file. For example right before you start to run the ruu, what does that screen show
Click to expand...
Click to collapse
Nothing just the black screen and HTC in the middle, please refer to my first thread attached photo's are available.
Thanks
xHausx said:
Jab2k, you might have a bad copy of the ruu. It locks you in ruu mode like that when you have an incomplete flash but once you get a good one it will be back to normal.
If redownloading the 3.70 ruu doesnt fix it you will need to flash it manually using fastboot to see where it is going wrong
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I download it twice and I compared the checksums too:
File:RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe
CRC-32: 5e0d152a
MD4: 5f333cb26717f97d4e1edaad2069685a
MD5: 01f712c0bea8ae6eb42ebb2f8017592c
SHA-1: f546b6fe4ffa276ff2adc167961c2f7a29654d16
Any flashing just let it to boot.. can you please advice for fastboot flashing? There should be a solution..
Thanks for any advice
I have flashed the newest radio (26.09.04.26_M) via hboot, but I want to revert to the previous one because I was getting better download speeds. Unfortunately, every time I try to update it, it says "invalid image" or "no image." I have checked the md5 sum of the file, it is correct, I still have s=off, but I have tried multiple times to no avail. I don't have access to ADB, because I am at work. I am running Royal Fusion 1.06. Someone help me out here, please!
Scott41373 said:
I have flashed the newest radio (26.09.04.26_M) via hboot, but I want to revert to the previous one because I was getting better download speeds. Unfortunately, every time I try to update it, it says "invalid image" or "no image." I have checked the md5 sum of the file, it is correct, I still have s=off, but I have tried multiple times to no avail. I don't have access to ADB, because I am at work. I am running Royal Fusion 1.06. Someone help me out here, please!
Click to expand...
Click to collapse
All you need to do is download the correct PD15IMG.zip from the radio thread and store it on the root of your SDcard. Make sure you've deleted the other one off your SDcard or it might be picking up both of them and throwing the error.
I have done that. In fact, this was a clean card that i used to install. In Astro, the file shows as PD15IMG. Under details, it shows as a .zip file. I don't have to rename it PD15IMG.zip.zip do I?
Sent from my HTC Glacier using XDA App
Scott41373 said:
I have done that. In fact, this was a clean card that i used to install. In Astro, the file shows as PD15IMG. Under details, it shows as a .zip file. I don't have to rename it PD15IMG.zip.zip do I?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Check out this thread.http://forum.xda-developers.com/showthread.php?t=1059347
But yes.
That's the thread I've been using. In fact, I've flashed each of the radios twice to see which worked best for me. Just for s&g's I changed back to my old sd card, and it worked! Not sure why it wouldn't play well with the new one, but all is well now. Thanks for responding!
sent from my HTC Glacier
Need tons of help! I've been searching the forums for almost 24 hours now trying everything and still can't get it fixed. I rooted and got s-off on my wife's MyTouch 4g. I installed ROM Manager and flashed the latest CWMR 5.0.2.0. I did a full Nandroid backup. Then I tried flashing a Gingerbread ROM over the Froyo rom. It went to white MyTouch screen and never left it. I finally gave up and went back to recovery. When I try to restore using Nandroid, I get this:
Error while formatting /system!
E:Can't open /cache/recovery/log
E:Can't open /cache/recover/last_log
I can get into HBOOT, Fastboot and Recovery just fine.
I tried the RUU exe floating around and it always fails trying to reboot bootloader.
I tried letting it autoupdate the stock PD15IMG.zip floating around it always fails.
I've tried flashing different recoveries including older CWMRs and always get error about remote not enabled.
I'm at my wit's end. I'm leaving town tomorrow and need to at least get back to the nandroid backup before I leave. Any advice?
Wrong section dude ! Read the forum rules .
Sent from my HTC Glacier using xda premium
Your bricked. You suffer from a bad chip. Your only Hope is flashing the pcblahblah.zip thru fastboot and Hope it works.
Undeadk9 said:
Your bricked. You suffer from a bad chip. Your only Hope is flashing the pcblahblah.zip thru fastboot and Hope it works.
Click to expand...
Click to collapse
I put PD15IMG.zip on the sdcard. HBOOT checks the file and prompts me to update. When I choose yes, each option shows Fail-PU.
Is there something I'm missing here? Any help is appreciated. Sorry if it's in the wrong section. Can someone move the thread? Thank you.
[QUOTEI =chapaj;18334465]I put PD15IMG.zip on the sdcard. HBOOT checks the file and prompts me to update. When I choose yes, each option shows Fail-PU.
Is there something I'm missing here? Any help is appreciated. Sorry if it's in the wrong section. Can someone move the thread? Thank you.[/QUOTE]
I had the same problem, bad chip, just keep the ROM you are currently running, if you try to flash some thing you will have a semi brick.I couldn't never solve that problem.
Sent from my HTC Glacier using xda premium
chapaj said:
I put PD15IMG.zip on the sdcard. HBOOT checks the file and prompts me to update. When I choose yes, each option shows Fail-PU.
Is there something I'm missing here? Any help is appreciated. Sorry if it's in the wrong section. Can someone move the thread? Thank you.
Click to expand...
Click to collapse
Fail-pu means dead chip. Sorry but your device is done.
Sent from my HTC Glacier using xda premium
coupetastic-droid said:
Fail-pu means dead chip. Sorry but your device is done.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
not necessarily.. i recovered one of my MT4G's thats had this issue... Engineering bootloader is what saved my ass...OP, Did you flash the Eng bootloader when rooting your device??
That's the problem. I wasn't able to successfully flash a ROM so it's useless.
Sent from my PG86100 using XDA App
I rooted using a 1-click method I found here. I don't have the link in front of me. How can I check which one I have?
Sent from my PG86100 using XDA App
=/ I believe you should've flashed engineering bootloader before wiping your current ROM. Is your phone under warranty?