I have a bricked mytouch 1.2 with RADIO:2.22.23.02
SPL:13.33.0013 i cant access recovery and get bootloops ...i can however access fastboot/hboot... i used the sappimg.zip trick to get back to cupcake..but my phone just wont read it...it says NO IMAGE u
nder SAPPIMG.zip while trying to flash in hboot...any help...a little tight in money cant afford another phone at the moment..thanks..
Make sure that the sappimg isn't sappimg.zip.zip. &o to Control Panel-Folder Options-Uncheck the box that says "Hide known file extensions". If that's good, then format the card and copy the file back over. Make sure you backup your pictures and stuff since the format will erase the card.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Pancake Modz said:
I have a bricked mytouch 1.2 with RADIO:2.22.23.02
SPL:13.33.0013 i cant access recovery and get bootloops ...i can however access fastboot/hboot... i used the sappimg.zip trick to get back to cupcake..but my phone just wont read it...it says NO IMAGE u
nder SAPPIMG.zip while trying to flash in hboot...any help...a little tight in money cant afford another phone at the moment..thanks..
Click to expand...
Click to collapse
If you can access the bootloader then you're not bricked.
Imagine powering on your phone and you can't access the bootloader, recovery and your phone won't even boot at all. That's a real brick.
i had this problem last night trying to install gingerbread from yoshi i`ve flashed phone`s radio and hboot , to those versions that was recommended but after I started rom first time my phone started to restart itself , just like a bootloop , but my luck was that i had goldcard with a saphire.zip on it and it worked perfectly for me.I`ve notice that this SPL is locked and that`s why you can`t access recovery.hope this helps.cheers
use the guide in my sig it will help you
DonJuan692006 said:
Make sure that the sappimg isn't sappimg.zip.zip. &o to Control Panel-Folder Options-Uncheck the box that says "Hide known file extensions". If that's good, then format the card and copy the file back over. Make sure you backup your pictures and stuff since the format will erase the card.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
did both maybe its a bad sappimg.zip file can anybody hook me up with a link?
Link.
hmmmmmmmm very very intersting....i used that same file.....wtf
Pancake Modz said:
hmmmmmmmm very very intersting....i used that same file.....wtf
Click to expand...
Click to collapse
I would still try downloading it again. Your not putting the file inside any folders on the SD card, correct?
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
DonJuan692006 said:
I would still try downloading it again. Your not putting the file inside any folders on the SD card, correct?
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
no im not.... weird thing is ive used sappimg before....i will try it again....
Pancake Modz said:
no im not.... weird thing is ive used sappimg before....i will try it again....
Click to expand...
Click to collapse
is your problem fixed?
no it did not fix i have been getting by on my old razor i havnt messed with my mytouch in a couple weeks now...never did fix that thing
Try formatting your SD card and then running the sappimg again. Make sure you backup anything you want to keep from your SD card. Format to FAT32 default block size if you do it in Windows.
Sent from my HTC Glacier using Tapatalk
Im sorry ...I know am extremely inconsistent with my posts ..im sorry... but heres an update...ive got the SAPPIMG on the sd card...it finds it and installs it and everything then when i reboot...BOOM!...Bootloops!
Well...I Guess this problem is completely Unfixable-.-...
I think you need to boot into bootloader AFTER you do the SAPPIMG thing, then install a RUU, and from then you can fix it. No?
Im having the same issue.I got another sappimg.zip other than the one from theunlockr but when I try and flash it, it hangs up on unzipping the system. My computer recognizes the phone but adb will not. Im lost....
RUU?????????????
I was sooo happy when I finally got SAPPIMG.zip to be read by the phone...then I still cant access Recovery...i do not have a gold card ....and i do not know what a RUU is....
I finally got mine up and running with cm. You need to flash Amon RA's recovery...then you will be able to get into recovery. Check out cyanogenmod's wiki. They have a good write up and the links are good.
Sent from my Desire HD using XDA Premium App
Related
First off let me start by saying I now know what i did wrong. Next is there anyway i can fix it?
I didn't backup anything and then managed to erase everything... I have CM 6 but as of now all i can get is the boot screen. I tried recovery but that won't work becasue there is no backup. also Before I erased everything i managed to turn s on so now i have no way to turn that off correct? Im basicly looking for a way to restore my phone but if it cant be done then i understand. Right now I am using a samsung vibrant with Nero v3 voodo and understand how to install custom roms now
i have almost the same problem as you I don't know what to do I've looked everywhere.
zigg82 said:
First off let me start by saying I now know what i did wrong. Next is there anyway i can fix it?
I didn't backup anything and then managed to erase everything... I have CM 6 but as of now all i can get is the boot screen. I tried recovery but that won't work becasue there is no backup. also Before I erased everything i managed to turn s on so now i have no way to turn that off correct? Im basicly looking for a way to restore my phone but if it cant be done then i understand. Right now I am using a samsung vibrant with Nero v3 voodo and understand how to install custom roms now
Click to expand...
Click to collapse
What do you mean... erase everything? How?
Possible steps:
1. factory reset from H-Boot, see if it boots up normally, then re-root.
2. Install PD15IMG from development section, look it up.
Good luck.
Man, do I feel like an idiot...
borodin1 said:
What do you mean... erase everything? How?
Possible steps:
1. factory reset from H-Boot, see if it boots up normally, then re-root.
2. Install PD15IMG from development section, look it up.
Good luck.
Click to expand...
Click to collapse
I've tried this, but it still hangs on boot screen. Thanks tho.
That sucks.
S.I. 77
zigg82 said:
First off let me start by saying I now know what i did wrong. Next is there anyway i can fix it?
I didn't backup anything and then managed to erase everything... I have CM 6 but as of now all i can get is the boot screen. I tried recovery but that won't work becasue there is no backup. also Before I erased everything i managed to turn s on so now i have no way to turn that off correct? Im basicly looking for a way to restore my phone but if it cant be done then i understand. Right now I am using a samsung vibrant with Nero v3 voodo and understand how to install custom roms now
Click to expand...
Click to collapse
Same issue here...I have nero v5 on my vibrant lol.
We should've just stayed with the vibrant...
Which recovery did you have installed and which h-boot
Did you try seeing if you could s-off through adb? Im not sure if this will work but Download the files you need to get s-off from ur computer and put it on ur SD card via a card reader or some sort, after you get the necessary files put the SD card back into ur phone. Hook it up to ur computer and maybe you can s-off through adb if you can get ur computer to recognize ur phone. Then IF it works, download a rom via computer to it SD card and boot into recovery and flash. Let me know what happens if it works or not
Sent from my HTC Glacier using XDA App
Should have taken my advice from this thread.
I just went thru the same thing and couldn't restore any of the backups it just kept getting stuck on the flash screen. I downloaded the ice glacier rom on to a spare sd card and flashed it thru hboot recovery and it looks like that did the trick.
hi guys if you still cant get your phones working try mobiletechvideos.com, they fixed my phone , my phone wouldn`t do anything .good reliable service, yes its in texas.
Although you didnt create any backups, is it possible that someone can create a backup of a fresh ROM and send that to you?
youshoe said:
Just take the SD card and put a new ROM on it. Then go to recovery, wipe data, wipe cache, wipe dalkik cache.
Then install zip from sd card and find it.
I like using Royal Panache 1.3.
I think it's stock Mobilicity ROM but no stock software from carrier. Good stuff.
MIUI and Cyanogenmod 7.1 are also good candidates.
I'm currently testing out ICS and you can test it out as well (but in your case, probably try a working one first =P) http://forum.xda-developers.com/showthread.php?t=1383629&page=1
Click to expand...
Click to collapse
I believe this is the oldest thread revive in the my touch 4g, Congrats good sir.
Sent from my HTC Glacier using xda premium
Nicgraner said:
I believe this is the oldest thread revive in the my touch 4g, Congrats good sir.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Wrong, he just randomly revived a thread that last post was made in July 2011.
Sent from MT4G-Glacier powered by HKM's GB2.3.X Enhancement Package v1.2
He revived quite a few of them, trying to market what I believe to be his product. Just look at his messages. Don't want to write the name of the product, since it appears he's scoring just for that.
I've reported his posts, but didn't see mod response yet.
Yet they always get me
Sent from MT4G-Glacier powered by HKM's GB2.3.X Enhancement Package v1.2
Jack_R1 said:
He revived quite a few of them, trying to market what I believe to be his product. Just look at his messages. Don't want to write the name of the product, since it appears he's scoring just for that.
I've reported his posts, but didn't see mod response yet.
Click to expand...
Click to collapse
Oh, as marketing for the app he talks about? I thought you meant ICS and was thinking well that just goes to feby's ICS thread..
Sent from my HTC Glacier using xda premium
FYI if it's older than a week..just let it go
I have an Epic myself and the security of this new HTC phone threw me for a loop. Anyway , I was trying to put CM7 on his phone , starting from stock. I managed to get CWM 3.0.0.5 on it and then flashed the CM7 from here. Now it is stuck on the white Tmobile screen , Ive let it sit therefor an hour and nothing. But the real problem is that I cant find a way to restore to stock and start over. With the Epic we use a windows program called ODIN in case something like this happens. Ive tried using ADB but the phone is showing offline so I cant push any commands to it. Is there an app like ODIN that will let me factory reset this phone and try this again? Thanks
Sent from my SPH-D700 using Tapatalk
Sounds like you rooted and flashed CM7 onto it without having s-off. If I'm not mistaking there is another thread similar to this one somewhere. Also you need cclockwork 3.0.0.6 to flash back and fourth from stock and other roms.
you need pd15img.zip on your SD
pd15img.zip reboot into hboot with that file and the part7-0000000000.bin file on your sd and it will load and ask you to push volume up to confirm then wait, it will restore the phone i know i did it, took me 3 damn days to figure out you need that part7.bin file on your sd with that pd15img.zip file...or its a no go, trust me this WILL def work...its a life saver, i did the same thing you did...had clockwork and no s=off...now i successfully restored it and sent it back to tmobile because before i solved it i panic and called for a replacement, told em it wont turn on, they sent the new one, and about 20 mins ago i flashed cm7 after folling this guide http://forum.xda-developers.com/showthread.php?t=858996 to turn s=off...works great good luck
Where do i get the part7 file and the other one? Thank you
Sent from my SPH-D700 using Tapatalk
biscojams said:
Where do i get the part7 file and the other one? Thank you
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
It was creates with you permanent rooted it.. should be on your SD card. In the rooting instructions it tells you to keep that file around.
Sent from my HTC Glacier using XDA App
Just make sure that u dnt keep tryin to flash the rom cause u gonna end up gettin the cant mount cache & data errors,which once that happens nothin can b done with the mt4g.. So if u used the gfree method to root the phone u should have the part7-xxxxxxxx.bin file,stick that to the root of the sd card & put the pd15 file to the root of the sd card,powerdwn or battery pull,reboot into recovery & let the phne do its thing..
I don't think he has that part7-xx......bin file for his mt4g phone since he did not run gfree patch. You can't do stock nandroid restore also because that requires CWM 2.5.1.4 but you can always give it a shot.
Good luck with your boss, hope you don't get fired.
Sent from my myTouch 4G using XDA App
camalus said:
It was creates with you permanent rooted it.. should be on your SD card. In the rooting instructions it tells you to keep that file around.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I didn't use the gfree method for getting perm root.
So i never got that part7 file that you speak of....
I have found them online to download but even using someone elses i still doesnt load the .zip from hboot :{
I downloaded the glacier file , like 350 MB or something , renamed it to PD15IMG.ZIP (had to leave the .zip out because windows). Then I found the part7.bin file from another thread. Put both on sd card. Vol down and power, it found the pd15img file and started restoring the image. 15 minutes later the phone boots up just like brand new! Thank you to everybody who helped with this! Sometimes I dont know what i'd do without this place!
P.s.- he still wants gingerbread any suggestions as to best rom?
Thanks again everyone
Sent from my SPH-D700 using Tapatalk
I think you made a fine choice with CM7. Just make sure you are rooted and have flashed the latest clockworkmod through ROM manager (3.0.2.4 I believe) and it should flash without issue.
Ok I am working on this mytouch it is stuck on the android skating and the SD card is completely blank. the Hboot is 0.86.0000
I want to put the correct files back on the sd card and the correct PD15IMG so that i can un-soft brick this phone i have no other info from the prior owner rooted or not ect.. ADVICE, LINKS, DOWNLOADS ???
Download the gingerbread PD15IMG.zip from here. Place it on the SD Card, boot into hboot, then let it do its thing! Press thanks if I helped
So question? Even if the Android File system is missing on the SD card this will re-build it?
MJHawaii said:
So question? Even if the Android File system is missing on the SD card this will re-build it?
Click to expand...
Click to collapse
Boot into hboot to check if it's s=off first
Sent from my HTC Glacier using xda premium
I don't think the android system is on the SD . But yeah just flash and everything should be fine.
Sent from my Sense 4.0 Glacier using XDA Premium.
MJHawaii said:
So question? Even if the Android File system is missing on the SD card this will re-build it?
Click to expand...
Click to collapse
Invasion2 is correct. The "system" files are stored on the internal memory. Any folders/files missing from the sd card that weren't put there by you will be regenerated by android and apps you use.
Sent from my Glacier using XDA
fAILED PU
Ok I pushed the files and it says Failed PU at the bootloader then says press power to reboot? this was the GB File, should I be pushing a froyo?
MJHawaii said:
Ok I pushed the files and it says Failed PU at the bootloader then says press power to reboot? this was the GB File, should I be pushing a froyo?
Click to expand...
Click to collapse
Failed pu means dead emmc in other words paperweight sorry bro u screwed
IceColdGlacier®
I just read it, oh well one just invested time is all
There is someone on these forums that claims to be able to get somethin workin on fried emmc phones..
Sent from my HTC Glacier using xda premium
The Thread is named "solution for fried Roms" and its here in the General section....
Sent from my HTC Glacier using xda premium
http://forum.xda-developers.com/showthread.php?t=1574249
Sent from my Sense 4.0 Glacier using XDA Premium.
I was in a boot loop after a failed install of a custom rom - did all the research - came to the conclusions that I had bad emmc - was getting the fail-pu errors when trying to flash the PD15IMG.zip. As a last ditch effort, found a thread that talked about SD format - yep found out it was an issue with my SD card format. I ended up putting another SD card in that worked in another phone (could also format a new card FAT32) and was able to finally get past this and get the stock (froyo) image on.
Yes but this is for a phone with custom recovery that is not the case here this is a stock phone with s on
Sent from my SPH-D710 using XDA
I already tried re formatting to fat32 when i load the froyo image it loads it and skips the update to the mytouch 4g screen no failed pu message just with the gingerbread img.
Sent from my SPH-D710 using XDA
Yeah dude you have a paperweight. I would just go to Tmo and ask for a replacement. Say it just shut off automatically or something. Sorry, hope I helped.
Final word
As I said I am working on this phone so I have to deliver the bad news. The person who owns the phone bought it used and was using it then updated and things went bad. Hope this thread helps someone. Thank you for the repsonse
First
here is my phone info:
speed xe eng s-off
hboot-0.92.2001
pg0610000
radio 1.08.00.0506
eMMC-boot Nov 15 2010
on Android 2.3.7
I tried both RUU 2.2 RUU 2.3, and both window desk top method and fastboot usb, it kept say error 170 usb connection error.
I didn't turn on the usb storage, and unchecked the debugging. There was no option on my phone to set charging only. Do I need to install a driver for the phone? window Window 7 machine.
Please help.
Have you tried the PG06IMG.zip ruu?
Sent from my PG06100 using Tapatalk 2
Not sure about the error but there is a USB driver you need to install for you PC which I had to install before running the root method I used(forgot which, to be honest). Pretty sure it allows you computer to talk to your phone though I could be completely wrong.
http://forum.xda-developers.com/showthread.php?t=1427713
Says it's Win 7 compatible and for the Evo Shift but the file name says 32, so if you're running 64, you want to Google search before to make sure it's universal.
crump84 said:
Have you tried the PG06IMG.zip ruu?
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
no. found the link and downloading it and will keep you posted.
thanks,
dumper1234 said:
no. found the link and downloading it and will keep you posted.
thanks,
Click to expand...
Click to collapse
Just make sure your sd card is formatted to fat32 and you should be good to go
Sent from my PG06100 using Tapatalk 2
crump84 said:
Just make sure your sd card is formatted to fat32 and you should be good to go
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
i tried to volumn down and power, it said something wrong...., it went too fast I couldn't see it all. It went straight to hboot.
My sd card is formatted to fat32.
I was having trouble with my camera, and is on TeamAndroid AOSP Roms, and partitioned my sdcard (500m out of 16g).
One thing when I partition the sdcard, i didn't make a back up, so I lost everything was on the sd card. so my current sdcard has no recovery.img or anything, other the files the rom created after flashed. No sure it makes any different.
Should do fastboot or recovery now? I'm on Hboot.
Please help.
dumper1234 said:
i tried to volumn down and power, it said something wrong...., it went too fast I couldn't see it all. It went straight to hboot.
My sd card is formatted to fat32.
I was having trouble with my camera, and is on TeamAndroid AOSP Roms, and partitioned my sdcard (500m out of 16g).
One thing when I partition the sdcard, i didn't make a back up, so I lost everything was on the sd card. so my current sdcard has no recovery.img or anything, other the files the rom created after flashed. No sure it makes any different.
Should do fastboot or recovery now? I'm on Hboot.
Please help.
Click to expand...
Click to collapse
Is the zip on the root of your sd card? Shouldn't be inside any folders. Also make sure it's named PG06IMG.zip exactly. Once you boots into hboot it should ask if you want to update
Sent from my PG06100 using Tapatalk 2
crump84 said:
Is the zip on the root of your sd card? Shouldn't be inside any folders. Also make sure it's named PG06IMG.zip exactly. Once you boots into hboot it should ask if you want to update
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
understood. one more thing, when I extract the files, my virus warning flagged me and I let it remove the file. should I ignore the warning?
updating.....keep my fingers cross.
it works! you guys are great.......
thank you and thank you.
I may have missed something but I hope you aren't extracting the actual PG06IMG.zip file. It needs to go onto your sdcard intact.
Sent from my PG06100 using xda premium
jsp254 is correct, I hope your not extracting the file. The PG06IMG.zip needs to be run in HBOOT. Like crump said it should be found automatically when you boot into HBOOT. You will be prompted on whether you want to flash the zip or not.
FYI, I had an issue with the 2.3 PG06IMG.zip where it flashed my bootloader to S-ON and refused to downgrade to from 2.77 to 2.76 (2.3.4 PG06IMG.zip)
I had to use the thunderbolt misc.img trick in order trick it to downgrade.
Becareful recommending things like this, guys. We're lucky we have this trick or you could screw a few people over by telling them they can use this .zip to downgrade. [I almost screwed myself over]
nullstring2 said:
Thats kind of a pain.
I used http://goo.im/stock/speedy/ruu/PG06..._1.88_0128_PRL60674_release_196686_signed.zip
However, after it updated to S-ON, it says "Main Version is older! Update fail"
Do I need to use the 2.2 RUU?
EDIT:fastboot getvar version-main
2.77.651.3
Hrm. Did I screw up here?
Can I still use the 2.2 RUU?
Do I need to use the downgrade techniques to get it to downgrade?
EDIT2: I flashed the misc.img in order to trick hboot into installing 2.3.4 stock.
I'm not sure if I was suppose to have to do that.. but whatever, it worked.
Click to expand...
Click to collapse
dumper1234 said:
i tried to volumn down and power, it said something wrong...., it went too fast I couldn't see it all. It went straight to hboot.
My sd card is formatted to fat32.
I was having trouble with my camera, and is on TeamAndroid AOSP Roms, and partitioned my sdcard (500m out of 16g).
One thing when I partition the sdcard, i didn't make a back up, so I lost everything was on the sd card. so my current sdcard has no recovery.img or anything, other the files the rom created after flashed. No sure it makes any different.
Should do fastboot or recovery now? I'm on Hboot.
Please help.
Click to expand...
Click to collapse
Thanks for the reminder, I need to add a warning to my google page about formating the SD in recovery and how it will erase everything
Sent from my PG06100 using xda premium
dumper1234 said:
understood. one more thing, when I extract the files, my virus warning flagged me and I let it remove the file. should I ignore the warning?
updating.....keep my fingers cross.
it works! you guys are great.......
thank you and thank you.
Click to expand...
Click to collapse
Yes ignore all virus warnings. It's funny because after doing a virus scan with avast! on my pc it wanted to delete the visionary app lol. I know it's a malicious app for rooting exploits on android but it shouldn't be warning me about it on my pc lol.
sparksco said:
Yes ignore all virus warnings. It's funny because after doing a virus scan with avast! on my pc it wanted to delete the visionary app lol. I know it's a malicious app for rooting exploits on android but it shouldn't be warning me about it on my pc lol.
Click to expand...
Click to collapse
I have Viper on my Laptop. It says a lot of my Android Stuff that I've used a bunch of times is Malicious . It has something to do with the security settins. But I've changed them to the lowest settings, with still the same message. I've also had it delete the Visionary apk. But at this point I just shut it down when I'm doing something I know it will interfere with. Gives me the same messages with RUU's .
TEAM MiK
MikROMs Since 3/13/11
hi there i have my my touch 4g running jellybean 4.1.1 and some reason today when i went to go in the boot menu and change my splash screen it like restarted itself. Every time i try to click recovery in the boot menu it shows the pd15 files and then shows you need to update it. So basically i guess it went back to its original skin ,but still has everything. I see the s is off. Is there a way to be able to go back or do i have do the whole entire rooting process over again? I really appreciate all your help.
You need to remove the PDxx.img file from your SDcard otherwise evertime you go to the bootloader it will boot the stock ROM.
Sent from my HTC Glacier using xda premium
romuloxiii said:
You need to remove the PDxx.img file from your SDcard otherwise evertime you go to the bootloader it will boot the stock ROM.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Thanks for responding. Umm I'm kinda of confused are you talking about the PD15img.zip? Also, would it be hidden in a folder or just out in the beginning?
alex5p said:
Thanks for responding. Umm I'm kinda of confused are you talking about the PD15img.zip? Also, would it be hidden in a folder or just out in the beginning?
Click to expand...
Click to collapse
Pd15img.zip should be located in the root of your SD card.
Sent from my HTC glacier using xda premium
alex5p said:
Thanks for responding. Umm I'm kinda of confused are you talking about the PD15img.zip? Also, would it be hidden in a folder or just out in the beginning?
Click to expand...
Click to collapse
If you flashed a ROM of some sort using the PD15IMG.ZIP method (such as a stock Froyo or GB ROM), it exists in the root of your SD card (so, under /sdcard). You should see it by hooking up the phone and browsing to the top level of the card, or you could take the SD card out and examine it directly. If you don't rename if after an install, every time you try to boot the bootloader will look for it and try to reinstall it.
Whether you need to reroot again kind of depends on what the PD15IMG was. If you went back down to a stock ROM, then you would probably have to at least go through the rooting steps again (but not the S-off part).
cnote74 said:
Pd15img.zip should be located in the root of your SD card.
Sent from my HTC glacier using xda premium
Click to expand...
Click to collapse
Ok i found it and deleted it was the same thing. It would go back to stock ,but it actually showed a phone with a x on it . Thanks for your help
tuxkamen said:
If you flashed a ROM of some sort using the PD15IMG.ZIP method (such as a stock Froyo or GB ROM), it exists in the root of your SD card (so, under /sdcard). You should see it by hooking up the phone and browsing to the top level of the card, or you could take the SD card out and examine it directly. If you don't rename if after an install, every time you try to boot the bootloader will look for it and try to reinstall it.
Whether you need to reroot again kind of depends on what the PD15IMG was. If you went back down to a stock ROM, then you would probably have to at least go through the rooting steps again (but not the S-off part).
Click to expand...
Click to collapse
Yea i'm guessing ill have to root it again to get jelly bean back on. Thanks for the help
Alright so all day today i have been trying to get my phone working again and i can not get it to work. It still won't let me go into clockwork mod menu when you click recovery. when i click recovery it shows a phone with a red ! on it. I've tried factory reset ,full reset of phone and sd card and still not working. Anyone have any ideas why it won't work?
alex5p said:
Alright so all day today i have been trying to get my phone working again and i can not get it to work. It still won't let me go into clockwork mod menu when you click recovery. when i click recovery it shows a phone with a red ! on it. I've tried factory reset ,full reset of phone and sd card and still not working. Anyone have any ideas why it won't work?
Click to expand...
Click to collapse
I've only had that happen a couple of times when a ROM did not load successfully. Usually it's recoverable, but it sounds like in this case you *might* (I would ask somebody with more experience) need to reflash the CWM recovery via adb in order to get it working once again.
tuxkamen said:
I've only had that happen a couple of times when a ROM did not load successfully. Usually it's recoverable, but it sounds like in this case you *might* (I would ask somebody with more experience) need to reflash the CWM recovery via adb in order to get it working once again.
Click to expand...
Click to collapse
Yeah. The PD15IMG.zip put the stock recovery back on. Just flash the custom recovery of your choice.