I tried to use RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed on my Sprint EVO 4G to rollback, but after reboot every thing stopped..
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041F
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.09.88
Note: Both screens are attached.
Urgent help please?
Your phone is still s-off. You need to flash the unrevoked s-on tool first then run the ruu.
Sent from my PC36100 using XDA App
Dear Rem3Dy
Thank you for reply, can you give me any tutorial link or guidance to to so? I meant "unrevoked s-on tool"?
Thanks
is there any other hep please?
Let me explain in more detailed:
When power on (even after removing battery) I cannot log-in to HBoot through Volume Down+Power buttons.
Just a big HTC in a middle of black screen rounded in each corner an exclamation mark.
Then when plug my PC-USB and unplug below information showing up:
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041F
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.09.88
Thanks for any support or guidance
jab2k said:
is there any other hep please?
Let me explain in more detailed:
When power on (even after removing battery) I cannot log-in to HBoot through Volume Down+Power buttons.
Just a big HTC in a middle of black screen rounded in each corner an exclamation mark.
Then when plug my PC-USB and unplug below information showing up:
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041F
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.09.88
Thanks for any support or guidance
Click to expand...
Click to collapse
On the unrevoked site under the EVO guide they link you to the download. There are plenty of guides on this forum so I am not going to do the work for you. This is why you should do the research before attempting to brick your 500 dollar phone.
Sent from my PC36100 using XDA App
If you can't get into the bootloader, you can't get into recovery which is where you need to flash the s-on tool. Try running the RUU in exe form from your computer. If it works, you will need to reflash recovery, flash the s-on tool, then run the RUU again.
Sent from my PC36100 using Tapatalk
plainjane said:
If you can't get into the bootloader, you can't get into recovery which is where you need to flash the s-on tool. Try running the RUU in exe form from your computer. If it works, you will need to reflash recovery, flash the s-on tool, then run the RUU again.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Yeah now that I see the pics that doesn't look good.
Sent from my PC36100 using XDA App
Put these files in the root of your SD card.
Amon RA and S-on tool
When you get into Hboot it should find this PC36IMG.zip and ask to run it. Run it. This will install Amon RA recovery onto your phone.
Then turn the phone off and reboot holding vol-down and power. Select recovery.
In recovery select "flash zip from sd" then select unrevoked-forever-son.zip
At this point find someway to get Pc access to your sd card again. You can do this from Amon RA by selecting USB mount (i forget the exact wording, sorry).
Delete the PC36IMG.zip and put this one on there instead. Go back to Hboot and let the PC36IMG run.
You should now be running stock again. Unrooted.
This thread might be of some help as well.
There is no recoginition
rstuckmaier said:
Put these files in the root of your SD card.
Amon RA and S-on tool
When you get into Hboot it should find this PC36IMG.zip and ask to run it. Run it. This will install Amon RA recovery onto your phone.
Then turn the phone off and reboot holding vol-down and power. Select recovery.
In recovery select "flash zip from sd" then select unrevoked-forever-son.zip
At this point find someway to get Pc access to your sd card again. You can do this from Amon RA by selecting USB mount (i forget the exact wording, sorry).
Delete the PC36IMG.zip and put this one on there instead. Go back to Hboot and let the PC36IMG run.
You should now be running stock again. Unrooted.
This thread might be of some help as well.
Click to expand...
Click to collapse
Sorry, it doesn't worked either.. it didn't recognize SD card to check for PC36IMG.zip.. just bypass it..
plainjane said:
If you can't get into the bootloader, you can't get into recovery which is where you need to flash the s-on tool. Try running the RUU in exe form from your computer. If it works, you will need to reflash recovery, flash the s-on tool, then run the RUU again.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Yep, I agree with you.. its the only thing that my phone is recognizing, but which version should i use?
I used
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed with my Windows 7 Ultimate, but after 100% installation it shows Error 152.. trying to find out best version, but there are no much document about..
Any idea please?
jab2k said:
Yep, I agree with you.. its the only thing that my phone is recognizing, but which version should i use?
I used
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed with my Windows 7 Ultimate, but after 100% installation it shows Error 152.. trying to find out best version, but there are no much document about..
Any idea please?
Click to expand...
Click to collapse
That's the correct one. Just try running it again, and again, and again if you have to. If it still won't work, you can try another one, but try the newest one first. You can also try taking it to Sprint and just play dumb. They may replace it for you.
Sent from my PC36100 using Tapatalk
Also make sure you have the correct drivers. Install HTC Sync then uninstall it, then try again. After some research, it seems the screen you're seeing is from a bad RUU flash, so completing the RUU should solve your problems.
Sent from my PC36100 using Tapatalk
This is really sad, nothing worked for me. All above suggestions have been tried but nothing working.
I am not sure is it MS Windows issue, if yes, is there any Linux or MAC tool to allow me log in to my ROM and reset or copy from original one?
rstuckmaier said:
Put these files in the root of your SD card.
Amon RA and S-on tool
When you get into Hboot it should find this PC36IMG.zip and ask to run it. Run it. This will install Amon RA recovery onto your phone.
Then turn the phone off and reboot holding vol-down and power. Select recovery.
In recovery select "flash zip from sd" then select unrevoked-forever-son.zip
At this point find someway to get Pc access to your sd card again. You can do this from Amon RA by selecting USB mount (i forget the exact wording, sorry).
Delete the PC36IMG.zip and put this one on there instead. Go back to Hboot and let the PC36IMG run.
You should now be running stock again. Unrooted.
This thread might be of some help as well.
Click to expand...
Click to collapse
You Sir are a great man!! Thank you
Nothing working, I'd many tests, still nothing.. and many RUU tested:
RUU_SuperSonic_S_Sprint_WWE_3.26.651.6_Radio_2.15.00.07.28_NV_1.71_003_release_147044_signed.exe
RUU_SuperSonic_S_Sprint_WWE_3.30.651.2_Radio_2.15.00.09.01_NV_1.77_003_release_154209_signed.exe
RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15.00.09.01_NV_1.77_003_release_157088_signed.exe
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe
Furthermore more than ten times HTC Sync driver removed and re-installed.. nothing working properly..
I'm just wondering best way to re partitioning original ROM?
thanks for any help
Minor suggestion: try running the RUU as administrator by right clicking > Run As Addministrator.
Had the same problem. When you start to run the ruu are the ruu and your phone the same file. For example right before you start to run the ruu, what does that screen show
Jab2k, you might have a bad copy of the ruu. It locks you in ruu mode like that when you have an incomplete flash but once you get a good one it will be back to normal.
If redownloading the 3.70 ruu doesnt fix it you will need to flash it manually using fastboot to see where it is going wrong
Sent from my PC36100 using XDA Premium App
Legendary20 said:
Had the same problem. When you start to run the ruu are the ruu and your phone the same file. For example right before you start to run the ruu, what does that screen show
Click to expand...
Click to collapse
Nothing just the black screen and HTC in the middle, please refer to my first thread attached photo's are available.
Thanks
xHausx said:
Jab2k, you might have a bad copy of the ruu. It locks you in ruu mode like that when you have an incomplete flash but once you get a good one it will be back to normal.
If redownloading the 3.70 ruu doesnt fix it you will need to flash it manually using fastboot to see where it is going wrong
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I download it twice and I compared the checksums too:
File:RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe
CRC-32: 5e0d152a
MD4: 5f333cb26717f97d4e1edaad2069685a
MD5: 01f712c0bea8ae6eb42ebb2f8017592c
SHA-1: f546b6fe4ffa276ff2adc167961c2f7a29654d16
Any flashing just let it to boot.. can you please advice for fastboot flashing? There should be a solution..
Thanks for any advice
Related
i have looked and couldnt find a thread that matched my problem...i have a rooted mytouch 3G (32B) and i cannot get back into recovery. i am able to get into hboot and fastboot but thats it...and when i try to boot regularly the phone will either get stuck in a boot loop or if it does boot (which is rare) it will go to the android tutorial screen and ask for me to touch. at the tutorial screen there will be a whole bunch of error and force closes...before these problems i had used clockwork rec and tried to flash another recovery from rom manager but it would flash a new recovery...then the problems followed and i could no longer flash either clockwork or amon ra....please help if there is any
Post your fastboot info. If your not locked with a perfected SPL you should be able to permanently flash a custom recovery and then flash a new ROM.
Sent from my HTC Magic using XDA App
I would just apply SAPPIMG.nbh, then use flashrec.apk from 1.5 to flash amon_ra. Then flash whatever you want.
Basically just follow this guide - http://theunlockr.com/2010/04/26/how-to-root-the-htc-mytouch-3g/
Sapphire PVT 32B SHIPP S-ON G
HBOOT-1.33.0006
(SAPPPP3000)
CPLD-10
RADIO-2.2219.261
May 27 2009, 19:06:41
Phateless said:
I would just apply SAPPIMG.nbh, then use flashrec.apk from 1.5 to flash amon_ra. Then flash whatever you want.
Basically just follow this guide - http://theunlockr.com/2010/04/26/how-to-root-the-htc-mytouch-3g/
Click to expand...
Click to collapse
the phone is stuck in boot loop and doesnt get passed android tutorial (followed by various error/force close messages) even if it gets passed the boot screen...
Gargon87 said:
the phone is stuck in boot loop and doesnt get passed android tutorial (followed by various error/force close messages) even if it gets passed the boot screen...
Click to expand...
Click to collapse
Pull the battery and reinstall, and while the phone is OFF, hold POWER + VOLUME DOWN until you get to the update/bootloader screen. Not sure what it's called. From there you can apply SAPPIMG.nbh from your sd card.
Obviously you'll have to use an adapter to copy the file directly to your SD card without the use of the phone itself.
That will put everything back to oem, then you can use flashrec.apk to install amon_ra and go on your merry way. Try it before you insist it won't work.
If he can't get the regular ROM loaded up he's not going to be able to use flashrec. You need to flash an engineering SPL using the goldcard method and go the old school route of flashing a custom recovey, then flash a new ROM. I'm guessing you rooted before using Androot. When I get to a computer I'll link a proper guide to help you out. You can't get to recovery either (holding home and pressing power)?
Sent from my HTC Magic using XDA App
DonJuan692006 said:
If he can't get the regular ROM loaded up he's not going to be able to use flashrec. You need to flash an engineering SPL using the goldcard method and go the old school route of flashing a custom recovey, then flash a new ROM. I'm guessing you rooted before using Androot. When I get to a computer I'll link a proper guide to help you out. You can't get to recovery either (holding home and pressing power)?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
You load SAPPIMG.nbh from the bootloader screen - you don't need a ROM at all.
Applying SAPPIMG returns the phone to 100% oem and should allow him to boot up again.
Applying the stock sappimg will return his bootloader/radio back to stock, not the ROM. You have to run an RUU to get back to complete stock.
Sent from my HTC Magic using XDA App
Phateless said:
Pull the battery and reinstall, and while the phone is OFF, hold POWER + VOLUME DOWN until you get to the update/bootloader screen. Not sure what it's called. From there you can apply SAPPIMG.nbh from your sd card.
Obviously you'll have to use an adapter to copy the file directly to your SD card without the use of the phone itself.
That will put everything back to oem, then you can use flashrec.apk to install amon_ra and go on your merry way. Try it before you insist it won't work.
Click to expand...
Click to collapse
ill try this...thank you.
Gargon87 said:
ill try this...thank you.
Click to expand...
Click to collapse
You're welcome, let me know how it goes. You're basically unrooting, going back to cupcake, and then re-rooting, but at this point I think that's going to be LESS effort than everything else you could try, lol.
It went well! Thanks a lot.
Sent from my HERO200 using XDA App
Gargon87 said:
It went well! Thanks a lot.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Awesome! I assume you're back up and running then? Which ROM did you choose?
i have a mytouch 3g 1.2 with the old radio and SPL, i acidently bricked it trying to flash the new radio and SPL and now i cant get into recovery or fastboot and the flash screen is frozen, pleassssssee help me get this fixed it has been completel useless for the last week or so
DonJuan692006 said:
Applying the stock sappimg will return his bootloader/radio back to stock, not the ROM. You have to run an RUU to get back to complete stock.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Complete RUUs can be applied via bootloader.
Sent from my HTC Glacier using xda premium
i have a small problem with my 32a. i used wrong sappimg image and i have :
SAPPHIRE UNKNOW 32A SHIP S-ON G
HBOOT -1.33.006(SAPP10000)
CLPD-12
RADIO-2.22.19.16i
My magic is vodapp25 (Vodafone romania).
sugestion?
Hello did root a 32A,
seems it worked, but than on the fasboot menu no progress
PW+VOL.DOWN start in Bootmoode
SAPPHIERE PVT 32A SHIP S-ON H
CPLD-12
RADIO-6.35.10.18
Jan 14 2010,00:14:58
Back Fastbootmode
SD CHECKING
Loading...(SAPPDIAG.ZIP
NO IMAGE!
Loading...(SAPPDIA2.nbh
NO IMAGE!
Loading...(SAPPDIAG.nbh
NO IMAGE!
Loading...(SAPPIMG.ZIP
NO IMAGE!
What is wrong there , any help ?
THanks
I'm not sure I follow you. Are you trying to root the phone, because your first line says you did already.
Try writing it in your own language and using a translator like Google Translator.
Sent from my HTC Magic using XDA App
i did
guess its clear !
i wrote: I did root
Phone still works
to flash the ROM I have to get into the fastboot menu.
after that it shows the listed problem
If your rooted u need a recovery. U have one? Boot to it and flash from there.
Sent from my HTC Magic SparksMod using XDA App
Yeah, you don't need fastboot to flash an actual ROM, you use a custom recovery. That's why I was confused.
Sent from my HTC Magic using XDA App
Thanks
Hello thanks so far.
I did it once one the N1 and it worked fine. But here it give me some headache.
Downloaded a Custom and a recovery ROM. Only one on the SD Card and try to install it.
The only way i know is hold VOL-DOWN and Power and from there start .
But this would be via fastboot ? and this show the error i posted.
Other option is, I have this ROM Manger as an App. Nice toy, found me the recovery or /and the custom ROM on the SD Card. After i try to install from there, it restart the phone goes up to the rogers screen and freeze their.
scratching my head.....
No Rom manager. Get amonra 1.7.0. (Custom recovery). Fastboot flash it. Will be instructions on his thread to fastboot flash it. Follow them. When done shut phone off. Boot into amonra home and power till recovery screen comes up. NANDROID BACKUP. Wipe everything in recovery. Partition sdcard the way u want it. Plug into computer. Hit USB toggle. Open sdcard on comp. Put Rom and gapps or whatever you're flashing. Close sdcard. Hit home to get out of USB toggle. Flash Rom and whatever. Reboot. Done. Keep us posted.
Sent from my HTC Magic SparksMod using XDA App
Hi all, first post here. I have rooted my N1 and flashed CM6 on it. Now I'm looking to root and flash a MyTouch Fender. I have one question that is really stumping me, and I have been all of over this forum. What is the differance between 32a and 32b? And if its on the phone, how would I find it? And do I have to flash a radio, too?
Ok, three questions.... lol
Still new at all this flashy stuff, but its great.
Any help would be greatly appreciated.
wickediis said:
Hi all, first post here. I have rooted my N1 and flashed CM6 on it. Now I'm looking to root and flash a MyTouch Fender. I have one question that is really stumping me, and I have been all of over this forum. What is the differance between 32a and 32b? And if its on the phone, how would I find it? And do I have to flash a radio, too?
Ok, three questions.... lol
Still new at all this flashy stuff, but its great.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Please start your own thread and we'll be more then glad to help out. Thread jacking isn't cool mmmkay....
Sent from my HTC Magic using XDA App
ok heres the situation, i tried to root my wifes mytouch 4g...i have rooted before, so i figured hey wtf lets give it a go, i got clock work 3.0.0.5 installed fine, but i cant get a restore to work or anything form there...i can do clock work and hboot/fastboot...nothing else...cyanogen just causes splash screen free...and so does anything else i flash...now i downloaded pd15img.zip and attempted to use that...but it just fills the blue bar in hboot and says checking pd15img.zip then goes back to hboot main screen i am never asked to load the zip with volume...please ladies and gents i know im not completely done here...and if i am i will get a replacement, but it seems like it should be an easy fix...what am i doing wrong...if i try to reflash recoveries in fastsboot i get signature verify error
http://forum.xda-developers.com/showthread.php?t=944681
this happened to me as well. i went to ice glacier and then followed the instructions on the link
You cannot use 3.0.0.5 for stock. You must flash an older recovery or 3.0.0.6 and then it will work. This is covered extensively and has been asked over and over again.
Flash the correct recovery for the rom you want to use and your problem will be solved.
Sent from my HTC Glacier using XDA App
i tried...
i have loaded other roms...i cant get a single one to make it past the splash screen...i cant flash another recovery from fastboot...i am baffled, you would think if i have fastboot...hboot...and clockwork it owuld be an EASY fix...anyone point me a lil further in the right direction, i dont mean to be dense i been up for a LONG time trying to figure this out, now im at work...slow day...and if i can fix this before i get home my wife will be SO HAPPY..so which version of ice glacier i just tried 1.1
?
Just flash 3.0. 6 and flash the rom you like, you should be good to go, you can set up web to flash the recovery... hope it goes smoothly =)
Sent from my HTC Glacier using XDA App
Also sometimes it takes a while to boot, how long do you give it?
Sent from my HTC Glacier using XDA App
i can set up what to flash the recovery? i cant flash through fastboot i get a signiture error, no matter WHAT recovery i use...old...new....05...doesnt matter and im at 05 right now...i know i need 6...i think that owuld fix me to...but i have NOT A CLUE how to obtain a new recovery without being able to move past the splash screen...i can boot into hboot...fastboot...and clockwork...nothing else.
like 20-30-40mins at a time, and it just stays on the splash
If the computer recognizes your device in pretty sure you can set up adb. Thanks flash recovery through there, you should have been able to flash Glacier, you must be doing something wrong, try flashing and stock zip through recover maybe?
Sent from my HTC Glacier using XDA App
how can i use the adb outside of android? i must have missed something , i typed adb devices while my device was in recovery it found it and said recovery next to it...what are the commands to issue a flash recovery? flash_image recovery /sdcard/recovery.img ? and where do i enter them? with my device in the recovery? or fastboot? hboot? sorry guys, im burining it too hard at both ends...my brains toast...im open to any thing you got
atrocityg1 said:
how can i use the adb outside of android? i must have missed something , i typed adb devices while my device was in recovery it found it and said recovery next to it...what are the commands to issue a flash recovery? flash_image recovery /sdcard/recovery.img ? and where do i enter them? with my device in the recovery? or fastboot? hboot? sorry guys, im burining it too hard at both ends...my brains toast...im open to any thing you got
Click to expand...
Click to collapse
lol you're thinking at light speed bro...
i'm not exactly sure of the commands but i know if you've got adb set up you should be able to do it. maybe adb shell?? i have no idea as i'm not a developer.
i'm confused why you couldn't get royal glacier flashed, it shouldn't matter which recovery you have with 2.2 roms. sounds like your phone just doesn't want to comply...
forgive me... as this is much a partial question as it is a suggestion... (coming from WinMo to Android myself) but can't Clockwork Mod be updated FROM Clockworkmod recovery??
I seem to recall that update.zip is the install for the clockworkmod install... and there's an option within clockwork to install update.zip... isn't that correct?
If so... wouldn't you just download the .zip for 3.0.0.6, copy it to the microSD and install it, then install the ROM of choice?
Ryan79 said:
forgive me... as this is much a partial question as it is a suggestion... (coming from WinMo to Android myself) but can't Clockwork Mod be updated FROM Clockworkmod recovery??
I seem to recall that update.zip is the install for the clockworkmod install... and there's an option within clockwork to install update.zip... isn't that correct?
If so... wouldn't you just download the .zip for 3.0.0.6, copy it to the microSD and install it, then install the ROM of choice?
Click to expand...
Click to collapse
recoveries have to unfortunately be flashed through script.. =/
gonna try that thanks aalsmadi1 and ryan79...illl post results...anyone got a 3.0.06 zip?
well im still in the same boat...not a clue how to make this flash work...the flashboot recovery command only tells me signiture verify failed...with 4 diff recoveries...somin is up
atrocityg1 said:
well im still in the same boat...not a clue how to make this flash work...the flashboot recovery command only tells me signiture verify failed...with 4 diff recoveries...somin is up
Click to expand...
Click to collapse
Edit: my bad, that won't work. There are other threads that will help tho. It's sticky in the q&a section
You have to have the eng spl for that to work.
Sent from my HTC Glacier using XDA Premium App
edit: ignore my post
woldy2 said:
in recovery...is signature verification on...its in install zip from sdcard...toggle toggle signature verification...select that...you want it to say disabled...i hit that on accident before...screwed me up for a couple days...it wont let you flash anything with that enabled.
Click to expand...
Click to collapse
Don't listen to him, your talking about something different
Sent from my HTC Glacier using XDA Premium App
well no matter now, i called tmobile and told them i was using the device and it died and now freezes at splash after fresh charge...shame i cant full on brick it so they cant see clockwork if they look...anyone that can help with that will be apprciated...ehh what am i saying XDA YOU ARE APPRECIATED
...... edit
The phone been crashing on me like crazy and it force it's self to reboot, just to crash even more weird. Well the phone won't boot up, it just get stuck at the t-mobile part. What i did before doing anything crazy to this phone, just did a basic let pull the battery out, and see if this fix it. After two times nothing, I did the gfree way to root the phone. Here my phone details.
Glacier pvt eng s-off
Hboot- 0.85.2007 (PD1510000)
Microp-0429
Radio-26.03.02.26_M
eMMC-boot
oct 11 2010 12:44:14
I did hours of research to figure out my error I'm getting on the phone, I can't find a way get this fix..When I boot up the phone to HBOOT it's trying to do a sd checking and try's to find PD15IMG.zip it doesn't find it. I launch Recovery, Once It loading up CWM v5.0.2.0. I get this errors
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
So this isn't good, I even know that. So what i did wipe data and cache it does it fine and works. So when I try to restore it wont let me at all, so that mean it corrupt, so im stuck now. Did my research on here, some say to flash a new rom, well i did and didnt work at all, it came to a point that it wouldn't let me installed a rom also. I just need help with this, I really need to use my phone. I had to installed the a rom doing a ADB way, it work but it still won't boot up at all. Can anyone help me with this?
Do you have a bad eMMC? Have you checked it?
At this time, the first priority is to boot up the phone. so return back to the stock Rom.
Just follow this steps for an error free installation.
1. Download the stock 2.2.1 rom here.
2. Rename it to PD15IMG.zip
2. Place it on the root of your sd card.
3. Remove the battery and Switch On your phone while holding the Power button & the down volume button.
4. The hboot menu will update your phone (do according to the hboot instructions).
Once you are in the stock Rom, check the eMMC. If it is good, you can proceed with rooting.
febycv said:
Do you have a bad eMMC? Have you checked it?
At this time, the first priority is to boot up the phone. so return back to the stock Rom.
Just follow this steps for an error free installation.
1. Download the stock 2.2.1 rom here.
2. Rename it to PD15IMG.zip
2. Place it on the root of your sd card.
3. Remove the battery and Switch On your phone while holding the Power button & the down volume button.
4. The hboot menu will update your phone (do according to the hboot instructions).
Once you are in the stock Rom, check the eMMC. If it is good, you can proceed with rooting.
Click to expand...
Click to collapse
IF THE BOOTLOADER SHOWS FAIL-PU THEN YOU ARE BRICKED. Fail-PU means failed partition update, nothing could be written to the eMMC chip, since the chip has died.
Sent from the HTC Glacier Sense 3.0 using XDA premium app
Please look at Glacier Wiki, section "Troubleshooting". Link in my signature.
saranhai said:
IF THE BOOTLOADER SHOWS FAIL-PU THEN YOU ARE BRICKED. Fail-PU means failed partition update, nothing could be written to the eMMC chip, since the chip has died.
Sent from the HTC Glacier Sense 3.0 using XDA premium app
Click to expand...
Click to collapse
I haven't check if the eMMC is bad or know how too, but I'll do a search to see how. I'm not getting a fail-PU at all. I can't get hboot to read the PD15IMG.zip file to update and get this to stock. It just saying no img. Is there a other way of doing this?
ANubis.Ice said:
I haven't check if the eMMC is bad or know how too, but I'll do a search to see how. I'm not getting a fail-PU at all. I can't get hboot to read the PD15IMG.zip file to update and get this to stock. It just saying no img. Is there a other way of doing this?
Click to expand...
Click to collapse
Hm maybe a bad download. Try the download again. This is the only way to get back to stock.
Sent from my HTC Glacier using xda premium
saranhai said:
Hm maybe a bad download. Try the download again. This is the only way to get back to stock.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Is there a way to do it by adb? I know my sd card isn't bad cause it read fine on my laptop. Also if i did the gfree way, would I have to remove it?
I got a fail-pu, for some reason my sd port isn't reading. As I can see there no way on fixing this error. So my best bit would be replaced the motherboard. thank you guy for the help..
ANubis.Ice said:
I got a fail-pu, for some reason my sd port isn't reading. As I can see there no way on fixing this error. So my best bit would be replaced the motherboard. thank you guy for the help..
Click to expand...
Click to collapse
Fail-PU means failed partition update, which means the eMMC chip died, which basically, to sum it all up means you're bricked.
Sent from my HTC Glacier using xda premium
First
here is my phone info:
speed xe eng s-off
hboot-0.92.2001
pg0610000
radio 1.08.00.0506
eMMC-boot Nov 15 2010
on Android 2.3.7
I tried both RUU 2.2 RUU 2.3, and both window desk top method and fastboot usb, it kept say error 170 usb connection error.
I didn't turn on the usb storage, and unchecked the debugging. There was no option on my phone to set charging only. Do I need to install a driver for the phone? window Window 7 machine.
Please help.
Have you tried the PG06IMG.zip ruu?
Sent from my PG06100 using Tapatalk 2
Not sure about the error but there is a USB driver you need to install for you PC which I had to install before running the root method I used(forgot which, to be honest). Pretty sure it allows you computer to talk to your phone though I could be completely wrong.
http://forum.xda-developers.com/showthread.php?t=1427713
Says it's Win 7 compatible and for the Evo Shift but the file name says 32, so if you're running 64, you want to Google search before to make sure it's universal.
crump84 said:
Have you tried the PG06IMG.zip ruu?
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
no. found the link and downloading it and will keep you posted.
thanks,
dumper1234 said:
no. found the link and downloading it and will keep you posted.
thanks,
Click to expand...
Click to collapse
Just make sure your sd card is formatted to fat32 and you should be good to go
Sent from my PG06100 using Tapatalk 2
crump84 said:
Just make sure your sd card is formatted to fat32 and you should be good to go
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
i tried to volumn down and power, it said something wrong...., it went too fast I couldn't see it all. It went straight to hboot.
My sd card is formatted to fat32.
I was having trouble with my camera, and is on TeamAndroid AOSP Roms, and partitioned my sdcard (500m out of 16g).
One thing when I partition the sdcard, i didn't make a back up, so I lost everything was on the sd card. so my current sdcard has no recovery.img or anything, other the files the rom created after flashed. No sure it makes any different.
Should do fastboot or recovery now? I'm on Hboot.
Please help.
dumper1234 said:
i tried to volumn down and power, it said something wrong...., it went too fast I couldn't see it all. It went straight to hboot.
My sd card is formatted to fat32.
I was having trouble with my camera, and is on TeamAndroid AOSP Roms, and partitioned my sdcard (500m out of 16g).
One thing when I partition the sdcard, i didn't make a back up, so I lost everything was on the sd card. so my current sdcard has no recovery.img or anything, other the files the rom created after flashed. No sure it makes any different.
Should do fastboot or recovery now? I'm on Hboot.
Please help.
Click to expand...
Click to collapse
Is the zip on the root of your sd card? Shouldn't be inside any folders. Also make sure it's named PG06IMG.zip exactly. Once you boots into hboot it should ask if you want to update
Sent from my PG06100 using Tapatalk 2
crump84 said:
Is the zip on the root of your sd card? Shouldn't be inside any folders. Also make sure it's named PG06IMG.zip exactly. Once you boots into hboot it should ask if you want to update
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
understood. one more thing, when I extract the files, my virus warning flagged me and I let it remove the file. should I ignore the warning?
updating.....keep my fingers cross.
it works! you guys are great.......
thank you and thank you.
I may have missed something but I hope you aren't extracting the actual PG06IMG.zip file. It needs to go onto your sdcard intact.
Sent from my PG06100 using xda premium
jsp254 is correct, I hope your not extracting the file. The PG06IMG.zip needs to be run in HBOOT. Like crump said it should be found automatically when you boot into HBOOT. You will be prompted on whether you want to flash the zip or not.
FYI, I had an issue with the 2.3 PG06IMG.zip where it flashed my bootloader to S-ON and refused to downgrade to from 2.77 to 2.76 (2.3.4 PG06IMG.zip)
I had to use the thunderbolt misc.img trick in order trick it to downgrade.
Becareful recommending things like this, guys. We're lucky we have this trick or you could screw a few people over by telling them they can use this .zip to downgrade. [I almost screwed myself over]
nullstring2 said:
Thats kind of a pain.
I used http://goo.im/stock/speedy/ruu/PG06..._1.88_0128_PRL60674_release_196686_signed.zip
However, after it updated to S-ON, it says "Main Version is older! Update fail"
Do I need to use the 2.2 RUU?
EDIT:fastboot getvar version-main
2.77.651.3
Hrm. Did I screw up here?
Can I still use the 2.2 RUU?
Do I need to use the downgrade techniques to get it to downgrade?
EDIT2: I flashed the misc.img in order to trick hboot into installing 2.3.4 stock.
I'm not sure if I was suppose to have to do that.. but whatever, it worked.
Click to expand...
Click to collapse
dumper1234 said:
i tried to volumn down and power, it said something wrong...., it went too fast I couldn't see it all. It went straight to hboot.
My sd card is formatted to fat32.
I was having trouble with my camera, and is on TeamAndroid AOSP Roms, and partitioned my sdcard (500m out of 16g).
One thing when I partition the sdcard, i didn't make a back up, so I lost everything was on the sd card. so my current sdcard has no recovery.img or anything, other the files the rom created after flashed. No sure it makes any different.
Should do fastboot or recovery now? I'm on Hboot.
Please help.
Click to expand...
Click to collapse
Thanks for the reminder, I need to add a warning to my google page about formating the SD in recovery and how it will erase everything
Sent from my PG06100 using xda premium
dumper1234 said:
understood. one more thing, when I extract the files, my virus warning flagged me and I let it remove the file. should I ignore the warning?
updating.....keep my fingers cross.
it works! you guys are great.......
thank you and thank you.
Click to expand...
Click to collapse
Yes ignore all virus warnings. It's funny because after doing a virus scan with avast! on my pc it wanted to delete the visionary app lol. I know it's a malicious app for rooting exploits on android but it shouldn't be warning me about it on my pc lol.
sparksco said:
Yes ignore all virus warnings. It's funny because after doing a virus scan with avast! on my pc it wanted to delete the visionary app lol. I know it's a malicious app for rooting exploits on android but it shouldn't be warning me about it on my pc lol.
Click to expand...
Click to collapse
I have Viper on my Laptop. It says a lot of my Android Stuff that I've used a bunch of times is Malicious . It has something to do with the security settins. But I've changed them to the lowest settings, with still the same message. I've also had it delete the Visionary apk. But at this point I just shut it down when I'm doing something I know it will interfere with. Gives me the same messages with RUU's .
TEAM MiK
MikROMs Since 3/13/11