when i press power button i saw the red light on led indicator...pls help me...
why wouldnt you recharge your battery ???
indycar said:
why wouldnt you recharge your battery ???
Click to expand...
Click to collapse
i already try to charge my batery...
my result is..
while i'm charging i saw the red light blinking..after certain period...my x2 only got backlight and my batery become hot and hot...
blinking red light while charging means your batt is low and it blinks till it get lil more juice in it
as for batt gettin hot its quite normal
dont try to turn the phone whiler charging try to charge for bout 30min and unplug it then try to turn it on
if this doesnt help it may be faulty batt
still the same.....
i already try to replace new batery..when i press the power button...my x2 vibrate and backlite on..i wait but only my backlite on...hmm...i dont know why???
Borrow or buy a new battery. I had the EXACT same problem, bought a new battery with wall charger from SE and now i have 2 working batteries.
http://forum.xda-developers.com/showthread.php?t=981250
Related
Hi! i've bought an used Qtek 9090. the problem is that this Qtek don't power on! it doesn't go on bootloader mode, doesn't go on hard reset ecc... but when i charge it, the red led turns on!
what can i do? please help me
well try to charge the battery only in the cradle
if this not help try to borrow working battery from someone, if your device does not start even with working battery then you are screwed (a hardware problem of some kind)
no i think the battery is ok.
there is a way to restore the bootloader? i've read about the jtag, but i don't know anything... can you explain?
Battery is charging only when the LED is orange/amber. Red means problems with charging - that's why xplode proposed putting the baterry directly in the cradle, as it can "fix" the battery.
Well the red light means there is problem, the most comon problem is the battery, but the red light is also shown with motherboard, bootloader, kernel, and other problems
one more option is there. if the battery is not charged from a long time it needs a shock before recharging to activate the electrons. u should apply some 12v at 1 or 1.5 amp for 15-30 sec. than battery will get a little charge which is sufficient to turn on the phone once.................... but do not apply this voltage regularly or for long time.
as the title says....any help anyone
anyone....?????
elite-fusion said:
as the title says....any help anyone
Click to expand...
Click to collapse
so strange, i think this is not a fault of battery, because lithium polymer battery is really long lasting, have you connect your x1 to computer, please connect your x1 to charger and wait about 1 hour. but maybe it's the fault of mini usb port, can you sync your x1 before it happen? in your case, bring it up to guarantee service is the best solution, what did you do before the device turn off?
Leave it on the charger, it could take about 15 - 20 minutes to start charging if the battery completely died.
i used a wall charger, and a computer charger, still no luck...i wasnt doing anything, i was playing a game and shut the game off started browsing through the fone, and it just shut off after a few battery low warning sounds. but the red light goes on after a wall charger, but nothing when i try to turn it on, it doesnt turn on, and when i unplug it to try to turn the phone on, the side lights flash red...i have no idea whats goin on but i got the phone today and its pissing me off already i spent 680 on the phone for a peice of crap...
elite-fusion said:
i used a wall charger, and a computer charger, still no luck...i wasnt doing anything, i was playing a game and shut the game off started browsing through the fone, and it just shut off after a few battery low warning sounds. but the red light goes on after a wall charger, but nothing when i try to turn it on, it doesnt turn on, and when i unplug it to try to turn the phone on, the side lights flash red...i have no idea whats goin on but i got the phone today and its pissing me off already i spent 680 on the phone for a peice of crap...
Click to expand...
Click to collapse
ah, you should keep it in the wall chager a bit longer, and don't use the computer charge at this time, when the battery complete die, you should keep it charge about 10 minutes before you can start it, don't worry, when you can see the flash light turn red, it's charging, wait a few minutes more, it's will work, just forget about it, go somewhere, when you comeback, push the power button:d
elite-fusion said:
i used a wall charger, and a computer charger, still no luck...i wasnt doing anything, i was playing a game and shut the game off started browsing through the fone, and it just shut off after a few battery low warning sounds. but the red light goes on after a wall charger, but nothing when i try to turn it on, it doesnt turn on, and when i unplug it to try to turn the phone on, the side lights flash red...i have no idea whats goin on but i got the phone today and its pissing me off already i spent 680 on the phone for a peice of crap...
Click to expand...
Click to collapse
was had same problem.just leave it charged.i leave it charged into usb drive,and it needs 5h before he turn on.battery was completely dead,like probably you have too.just leave it charged throught the night.
Charge some time and then remove battery cover and try to reset. as u mentioned lights are flashing when u r trying to switch on so just reset.
The X1 of my colleague had the same problem and he had the battery replaced by the vendor, no questions asked as it was dead after only 2 days...
Charged without battery...
elite-fusion said:
as the title says....any help anyone
Click to expand...
Click to collapse
Hi, I got similar problem and I called the support guys.
They advised me to remove the battery and charge the phone for 30 min and charged with the battery for 1.5 hour.
He claimed is some 'internal battery' stuffs.
Anyway I tried and it works.
In addition, I charged the battery when the level hits a minimum of 20%.
So far so good
Good luck.
vwx1 said:
Hi, I got similar problem and I called the support guys.
They advised me to remove the battery and charge the phone for 30 min and charged with the battery for 1.5 hour.
He claimed is some 'internal battery' stuffs.
Anyway I tried and it works.
In addition, I charged the battery when the level hits a minimum of 20%.
So far so good
Good luck.
Click to expand...
Click to collapse
That Solution worked for me as well. I was in Germany with some navigation software to find my destination address. Than suddenly my phone died, I thought. So I was stuck somewhere in the middle of nowhere.
Hi i have a problem. Yesterday my Prophet battery goes to 0%, when i back to the home I plug-in it to charger. The light-emitting diode start flashing, but i can't turn on my phone. After 8 hours connected to charger Prophet still won't work. DO you have any idea? Maybe this is battery problem?
PS. Sorry for my poor english.
same with me,my dopod 818 pro won't turn on after 2 month not use,i try to charge,but the led not light..its off..i have no idea witn this problem,please help me to solve.thanks
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
errhec said:
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
Click to expand...
Click to collapse
Oh.. great! do you know which pin of the battery is (+) and which pin is (-) pole? I want to charge the battery by a balance charger.
happened to me couple months ago
and i used desktop charger for 5 minutes directly on the battery
then plug it in and charged normally with usb connector
used the desktop charger on the first and last pins on the battery
Hello, i'm sorry, my english is bad. but i wanna help.
Now, before 1 week i have the same problem, my qtek s200 after update whit wm6.1. OK 1 month everything was ok, but after that /i don't now where i go wrong but no matter/ that my phone start stuck in bootloader. I let it one night on to see, maybe will turn,and at the morning he wont start, even the light wont start wen i put the carger on. I take one charger/from sony erricson/ cut cable, there are 2 cables, take off the battery of my pda, put directly cables from sony charger in to battery, black is minus, red is plus, but don't worry, there is no problem if you make mistake.Let it like that 1-2 hours, put battery back on pda and everything will be OK.Now in my case my ROM fu** up, i go to tree color screen/see more info how to do that/ and replace the ROM.and next time do not full dry the battery.Hope i help.
I ahve a major problem.
Today my battery went down, so I had to charge it.
I left it to charge when I returned the led was red, which means battery is low right? So I noticed it wasnt charging. I retried and was red again.
So I took the battery out and try to to start the phone with the charger attached. But it woudnt start.
The led was green and bliking yellow.
It wont even charge from the pc...................
What do I have to do? What could be wrong?
Thanx in advance
It's possible to turn charging off in the power settings... not sure what to suggest
john09 said:
It's possible to turn charging off in the power settings... not sure what to suggest
Click to expand...
Click to collapse
Itsw working again. Battery seemed dead. I left it charging for one day.
it shouldn't do that, even if you charge it for that long. HP automatically stops charging when full.
Probably the mini usb port is broken. You should have it checked.
Turkiye
I have problem with led notification when i charge my Touch2. The software never indicates the 100% charge and at 50-60% it start to discharge and then to charge again. The led is always orange, not change to green.
After 3-4 hours of charging i remove the power source, i restart the divice and it show 100% the battery level.
Somone know how to fix this bug?
I think is the same problem with HTC Diamond2 Power LED Notification fixed by HTC.
Nobody with this problem?
No did not notice.....what you can do to solve is a soft and alternatively a hard reset......
This problem apear after an hard reset and i think is something from the registry. But i can't find what.
mcosti2005 said:
... i restart the divice and it show 100% the battery level.
Click to expand...
Click to collapse
I have the same problem, can't solve it ((
yeah.. i have the same problem too..
there is something wrong with my mega after i made hard reset.
something wrong with the battery indicator. i had to reset my phone every time i charged.
so, please.. anybody know?? or even better, give us the solution..??
The same problem
There is an update on the HTC website concerning unlocking and resume after sleep http://www.htc.com/www/supportdownloadlist.aspx?p_id=291&act=sd&cat=all which is not an answer propably to your problem but would do anyway.
And for sure would take it to HTC service.....
Try this:
Try to plug the power cord to phone AFTER you unlock the screen. Verify the battery icon has changed to "charging" and leave the phone. The green led should light in max. 2 hours.
It works for me but i noticed this problem 2 times in 6 months.
I think it's a windows bug.
For my case, after hard reset it back to normal(turn green after full charge)
Assume that hard reset is performed in correct manner..!!
mcosti2005 said:
I have problem with led notification when i charge my Touch2. The software never indicates the 100% charge and at 50-60% it start to discharge and then to charge again. The led is always orange, not change to green.
After 3-4 hours of charging i remove the power source, i restart the divice and it show 100% the battery level.
Somone know how to fix this bug?
I think is the same problem with HTC Diamond2 Power LED Notification fixed by HTC.
Click to expand...
Click to collapse
I am from Singapore and I have the same problem.Leave it whole night to charge,wake up and the LED shows orange.Check the battery bar,same as the night before.I bring to HTC and told me to sent for servicing which I am not willingly to.Looks like a firmware issue.
Hello
I am a htc touch 3g user.... ( JADE )
I have this problem since 1.5 years ago...
Nothing solved it... Flashing Lots of ROMs ... Changing radio...
I am ok with it
Hi,
Sorry for my English
I think that problem by charging the battery is on the charging method, ie on the charge current.
If battery is charged by PC (USB), then charge current is 300-350 mA (Medium Charging), battery is then fully charged (100%) without any errors.
When using HTC charger, charging current is 800-900mA (FastCharging) and then come the problems.
My presumption is that interruption of charging is due to rapidly increasing voltage and temperature of battery, and it leads to protection shutdown, Windows will detect the error as it leads to charging interruption.
Hello guys,
Please try the following,
1. Drain the battery completely i.e. use the phone it it switches off by itself.
2. Once done, start charging the phone & keep the phone powered-off.
3. Charge it completely till the LED status is Green.
The above method will refresh the battery & probably should clear the issue.
Power LED
escape007 said:
Hi,
Sorry for my English
I think that problem by charging the battery is on the charging method, ie on the charge current.
If battery is charged by PC (USB), then charge current is 300-350 mA (Medium Charging), battery is then fully charged (100%) without any errors.
When using HTC charger, charging current is 800-900mA (FastCharging) and then come the problems.
My presumption is that interruption of charging is due to rapidly increasing voltage and temperature of battery, and it leads to protection shutdown, Windows will detect the error as it leads to charging interruption.
Click to expand...
Click to collapse
Sorry for my English, translated by Google
I have the same problem, I found the display lights up when charging, is marked with 100% HTC charger.