Hi
I have some problem with camera not launched,its soft problem or what because i installed 6.5 rom,any guide?
cadiunlock said:
Hi
I have some problem with camera not launched,its soft problem or what because i installed 6.5 rom,any guide?
Click to expand...
Click to collapse
i have the same problem and still no solution. Desperate.
you did a hard reset ?
dragvandil said:
you did a hard reset ?
Click to expand...
Click to collapse
i did hard reset, softreset, flashing it back to basic room and zero result. Hopefully there's HTC engineer here
b0g4r4 said:
i did hard reset, softreset, flashing it back to basic room and zero result. Hopefully there's HTC engineer here
Click to expand...
Click to collapse
We got very slow answer,have any moderator there?
I had the same problem several months ago, I had to purchase a new camera off ebay
ATLDON said:
I had the same problem several months ago, I had to purchase a new camera off ebay
Click to expand...
Click to collapse
is it fix the camera problem?
Related
what is the problem ?
i have last rom 24062006
thanks
biker200 said:
what is the problem ?
i have last rom 24062006
thanks
Click to expand...
Click to collapse
What kind of reset: HARD or SOFT?
soft reset
right now i only see the screen that say 02 logo, i try to flash the rom again but it didnt help.
biker200 said:
soft reset
right now i only see the screen that say 02 logo, i try to flash the rom again but it didnt help.
Click to expand...
Click to collapse
If your device after reflashing of official version of ROM isn't starting up - something wrong with RAM or ROM(hardware) IMHO. Visit the Service Centre.
I had similar problems with my Atom. IT seems that there are some hardware issues that prevent Atom from starting in certain conditions. In my case, Atom freezes when I soft-reset using stylus and SR button. It defreezes if I take out battery and put it back, but in this case Atom looses time settings. In case I do softreset with program (like O2 plus) Atom restarts Ok and no problems at all.
nomad_irk said:
If your device after reflashing of official version of ROM isn't starting up - something wrong with RAM or ROM(hardware) IMHO. Visit the Service Centre.
Click to expand...
Click to collapse
is that something i can do if i leave in israel ? where should i send it for repair ? and also dos it worth the money ? to fix it ?
thanks.
biker200 said:
is that something i can do if i leave in israel ? where should i send it for repair ? and also dos it worth the money ? to fix it ?
thanks.
Click to expand...
Click to collapse
http://www.seeo2.com/support/template/RepairCenter.vm/_country/au
Choose the nearest one, contact with it and send.
If the warranty isn't over, you'll pay for the logistic(transporting) only.
I have a problem with the frontal camera of the tytn. suddenly it has stopped to work. I have tried hard reset without result. someone can help me to resolve the problem or must send the telephone in attendance? which can second be the causes you? there is a way in order to see if it is a problem software or hardware? thanks
If you've done a hard reset, it must be a hardware problem. I would send it back if it's still in warranty,
Joe
yes... is in warranty... but i hope to have another possibility
LUPEN-3 said:
yes... is in warranty... but i hope to have another possibility
Click to expand...
Click to collapse
Sure.. Open it up, repair the camera yourself, close it. Fixed.
oh my God!
I have upgraded the bootloader of the tytn to the last version (2.10olipro) and the radio to the 1.41.xxx, if I send the telephone in attendance, is problems with the guarantee?
There should be no problems with the guarentee. They expect you to do update the phone.
Joe
franjoe1985 said:
There should be no problems with the guarentee. They expect you to do update the phone.
Joe
Click to expand...
Click to collapse
Well updating using official updates is ok but with some providers they check for unofficial upgrades and may not be happy!
Mike
I have the same problem on SPV M3100!!!! no software solution found! I think is a hardware problem... But is a risk to open the pda by yourself!!!(even if could be a simple solution); let me know if you have good news...
what can happen if they notice that I have modernized the tytn with software off board?
LUPEN-3 said:
what can happen if they notice that I have modernized the tytn with software off board?
Click to expand...
Click to collapse
Possibility of voiding the warranty, but search here to see if your supplier will check. Or wait til others reply here.
Mike
how it makes knowing if the service attendance ceck the software?
LUPEN-3 said:
how it makes knowing if the service attendance ceck the software?
Click to expand...
Click to collapse
Well if you post here with your brand of Hermes eg TyTn or SPV etc and asking if anyone knows whether their warranty will be made void if non official ROMs have been flashed. I read somewhere but it could be wrong that Cingular in the US do not routinely check and warranty is not therefore affected.
Mike
I only have flashed spl and radio… tasks that are a problem? I have tytn Italy not brand
LUPEN-3 said:
I only have flashed spl and radio… tasks that are a problem? I have tytn Italy not brand
Click to expand...
Click to collapse
Well maybe it would be easiest to phone them up and ask if it's ok i.e pretend you have not done it yet and see what they say.
Mike
you already have just reason! creed that I will try to us! thank you so much!
Ok, randomly, this morning my Touch HD will not respond to any touch input. It will respond to the three hard buttons, but not the soft buttons or anything from the screen. I've reset it several times, but it hasn't helped. Any suggestions?
Anybody? Is it RMA time?
scythe000 said:
I've reset it several times, but it hasn't helped. Any suggestions?
Click to expand...
Click to collapse
Did U do a hard reset?
I did, finally. It didn't seem to help. I was hoping to avoid it, but nothing else worked. There's another thread or two with people reporting the same issues. They're also saying a hard reset didn't work. About 10-15 people with the same problem in the same day?
Did HTC push out a bad update?
scythe000 said:
I did, finally. It didn't seem to help. I was hoping to avoid it, but nothing else worked. There's another thread or two with people reporting the same issues. They're also saying a hard reset didn't work. About 10-15 people with the same problem in the same day?
Did HTC push out a bad update?
Click to expand...
Click to collapse
I doubt it. Is your screen still on or is it black? Problem with HD is that HTC haven't made it very well and with time the connections between board and screen fail or become loose which may be whats causing your problem. If hard reset, soft reset doesn't work, you have 3 options:
1. Turn off device or remove battery. Leave overnight and try to reboot in morning. If screen still not responsive go to options 2 & 3
2. Try flashing new rom
3. Return under warranty
Thanks for the response. It's got Dutty's 3.7 on it, so I'll try flashing it to stock and see what happens.
scythe000 said:
Thanks for the response. It's got Dutty's 3.7 on it, so I'll try flashing it to stock and see what happens.
Click to expand...
Click to collapse
You didn't happen to knock it off your dresser or anything in your sleep did you? Like Spartan said, internally the wires/connectors for the screen are very small and in my opinion poorly made. I have seen and dealt with this issue numerous times.
I'm not getting a good feeling about this... if it just stopped working overnight with no changes I'm guessing that flashing another ROM won't help. BUT, here's hoping to prove me wrong! *fingers crossed*
lol, no ddidn't get knocked off the dresser. I'm going to try to flash it today.
scythe000 said:
lol, no ddidn't get knocked off the dresser. I'm going to try to flash it today.
Click to expand...
Click to collapse
Let us know...
Well, I wound up doing another hard reset, then flashed a stock rom, no luck. I flashed SPL 1.13.000 so I can send it in for service.
scythe000 said:
Well, I wound up doing another hard reset, then flashed a stock rom, no luck. I flashed SPL 1.13.000 so I can send it in for service.
Click to expand...
Click to collapse
hmm.. seems to be a common problem. I had mine screen blank and I sent to RMA. After RMA, the Wifi and Bluetooth does not work... please make sure you check...
Mine is currently in RMA again due to the latter issue.
to think we are paying for a crap piece of hardware?? Never had that with the Samsung...
Thanks, I'll be sure to check!
Hey guys. Just recently my wing has had a problem. Whether it is plugged in and charging or not, it is always reading charging on the screen. Does anyone have any idea what I can do to fix this?
OoMesKoO said:
Hey guys. Just recently my wing has had a problem. Whether it is plugged in and charging or not, it is always reading charging on the screen. Does anyone have any idea what I can do to fix this?
Click to expand...
Click to collapse
Restart your phone.
ace10134 said:
Restart your phone.
Click to expand...
Click to collapse
Ive done that about 100 times. Im not sure if its a hardware or a software problem.... Restarting, clearing, hard reset... nothing works.
gratulations.U phone has solar charging function
xufeng said:
gratulations.U phone has solar charging function
Click to expand...
Click to collapse
LOL. I think xufeng is new around here, but that was one of my favorite answers!
Call the ol' T-Mobile, I guess.
A nice clear storage...complete reset has always fixed any problem I have ever had with my wing. Just go to Start/Setting/Clear Storage. and Follow the steps. Ta-Da! Brand new wing!
My dear mates!
I need your help in my case I purchesed a sumsung i9500 few days ago box packed but without warrenty. I used it in a week not used camera. Now when I try to open camera, the message pops up "camera failed" and screen blanked. I updated, hard reseted, did a lot of things but the problem is still remain now. some time after hard reset it works but after few hours it stopes. with code hardware test front camera works but not back caera.
Please help me as quickly as possible.
Best regards & thanks in advance.
azhar63 said:
My dear mates!
I need your help in my case I purchesed a sumsung i9500 few days ago box packed but without warrenty. I used it in a week not used camera. Now when I try to open camera, the message pops up "camera failed" and screen blanked. I updated, hard reseted, did a lot of things but the problem is still remain now. some time after hard reset it works but after few hours it stopes. with code hardware test front camera works but not back caera.
Please help me as quickly as possible.
Best regards & thanks in advance.
Click to expand...
Click to collapse
have you tried any ROM..?? IF no then give a shot. It might be camera problem.
Try factory reset
Disturbed™ said:
have you tried any ROM..?? IF no then give a shot. It might be camera problem.
Click to expand...
Click to collapse
yes I did tried UAE & UK Roms, but not succeeded
valentinrascu said:
Try factory reset
Click to expand...
Click to collapse
yes I did many time after factory reset it works some times
If you have tried various roms and a factory reset but to no avail it sounds like you have a hardware issue with the camera. A return for a replacement would therefore be your only option. It's easy to prove given the fact it's easily reproduced, take it back to the shop and open the camera, they should replace the handset no questions asked. They certainly would here in the UK anyway.
Pagnell said:
If you have tried various roms and a factory reset but to no avail it sounds like you have a hardware issue with the camera. A return for a replacement would therefore be your only option. It's easy to prove given the fact it's easily reproduced, take it back to the shop and open the camera, they should replace the handset no questions asked. They certainly would here in the UK anyway.
Click to expand...
Click to collapse
you are ok but I'm not in UK I'm in PK and unfortunately I didn't buy warrentied its without warrenty
azhar63 said:
you are ok but I'm not in UK I'm in PK and unfortunately I didn't buy warrentied its without warrenty
Click to expand...
Click to collapse
you might have to send it still to the service center and get your camera replaced, but you will have to pay a hefty price for that
saywhatt said:
you might have to send it still to the service center and get your camera replaced, but you will have to pay a hefty price for that
Click to expand...
Click to collapse
Do you know how much will I have to pay ??? And where is service center I mean nearest from pk?
azhar63 said:
Do you know how much will I have to pay ??? And where is service center I mean nearest from pk?
Click to expand...
Click to collapse
the last time i got my S3's camera fixed, I paid somewhere around $45-$50 (rough estimationn of our Philippine Currency to American Dollars). i honestly have no idea how much it will cost for the S4
azhar63 said:
My dear mates!
I need your help in my case I purchesed a sumsung i9500 few days ago box packed but without warrenty. I used it in a week not used camera. Now when I try to open camera, the message pops up "camera failed" and screen blanked. I updated, hard reseted, did a lot of things but the problem is still remain now. some time after hard reset it works but after few hours it stopes. with code hardware test front camera works but not back caera.
Please help me as quickly as possible.
Best regards & thanks in advance.
Click to expand...
Click to collapse
if you store your photos on sd card...may be your sd card is corrupted, that's why camera fails.
Try a different sd card
foxy4270 said:
if you store your photos on sd card...may be your sd card is corrupted, that's why camera fails.
Try a different sd card
Click to expand...
Click to collapse
Yes I did it but not succeeded, thanks for opinion