When i try to install hspl3 an error message comes up saying "This application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem.
I tried switching usb ports, sitll don't work
I booted into bootloader, and tried connecting with disk drive, still same error message
Sometimes my computer wouldn't let me install the drivers, but i tried a laptop at my friends house, it's saying the same thing on mine, with the drivers installed
Please help, im trying to install android nand
My SPl is 2.10.0000 and i know hspl3 supports that
Try this one, Extract the zip and run as administrator.
Do as the post above tells you too. Right click on the DFT utility and run it as administrator this is a must or you will get a error message everytime when trying to flash HSPL.
Rapi.DLL error is usually associated to activesync /wmdc not being up to date. Go download and install activesync for XP or wmdc for vista or 7. Yes. It's probably already installed, install it again.
Thankyou very much guys, it worked!
Related
Hello Everyone,
I have Tmobile HD2.I'd tried many times to install HSPL on my phone but everytime I get the same Error message.
Critical Error
Flow: 00000001
Error Code : 00000002
Description : USB connect failed.
My antivirous is disabled.
Can anyone advise what should I do ?? or Why is that message is coming up ??
Many thanks in advance.
samueladibusa said:
Hello Everyone,
I have Tmobile HD2.I'd tried many times to install HSPL on my phone but everytime I get the same Error message.
Critical Error
Flow: 00000001
Error Code : 00000002
Description : USB connect failed.
My antivirous is disabled.
Can anyone advise what should I do ?? or Why is that message is coming up ??
Many thanks in advance.
Click to expand...
Click to collapse
acitivesync runs ok?
YES, activesync is connected but I will try to reinstall it just in case if its the problem.
When your phone is in bootloader what SPL is listed, 2.10 or 2.08?
If 2.08 is listed, then HSPL should work and install just fine.
If 2.10 is listed, then HSPL will NOT work, and you will have to downgrade your version of SPL to 2.08, following this guide: http://forum.xda-developers.com/showthread.php?t=691779
Let me know either way.
~Jasecloud4
jasecloud4 said:
When your phone is in bootloader what SPL is listed, 2.10 or 2.08?
If 2.08 is listed, then HSPL should work and install just fine.
If 2.10 is listed, then HSPL will NOT work, and you will have to downgrade your version of SPL to 2.08, following this guide: http://forum.xda-developers.com/showthread.php?t=691779
Let me know either way.
~Jasecloud4
Click to expand...
Click to collapse
that would give a different error.
usb connect failed is usually down to trying to use a usb port that isn't directly mounted to the motherboard. confusion arises because flashing and active sync work perfectly fine from these ports, but hspl doesn't.
try to use a port around back off the pc, not in the case or a hub
im having the same problem as above, im running the HSPL from a laptop.... so im assuming the USB ports are not directly attached to the motherboard.... but i want to know what other option is there?? ive tried all three ports from the laptop, with no avail...
When you run the .exe right-click on it and run as administrator
im having the same problem, but i already installed 2.08 spl and installed energy rom CHT. im trying to change the radio and rom now but i keep getting that error message.
Critical Error USB connection failed
I was doing some reading here while troubleshooting the same error while trying to load hspl2 1024 via USB. I'm far from an expert, but the experience I just had may be of some use. For starters, I'm running Windows Vista 64 and the required Windows Mobile Device Center 6.1. After downgrading to 2.08, which worked fine, I setup active sync and ran hspl2 1024 as admin. After waiting about 30 seconds, Windows comes back with this critical error message. It seems that when the device sent to boot loader (tri colored screen), the USB connection is interrupted with windows and hspl2 1024 doesn't automatically try to reestablish connection, hence the error message. Anyways, I left the device at boot loader after error message popped up, closed hspl2 1024 and reopened it. This time it immediately recognized the connection with my device and installed. 30 seconds and done!! I hope this helps!!!!
griffinj01 said:
i was doing some reading here while troubleshooting the same error while trying to load hspl2 1024 via usb. I'm far from an expert, but the experience i just had may be of some use. For starters, i'm running windows vista 64 and the required windows mobile device center 6.1. After downgrading to 2.08, which worked fine, i setup active sync and ran hspl2 1024 as admin. After waiting about 30 seconds, windows comes back with this critical error message. It seems that when the device sent to boot loader (tri colored screen), the usb connection is interrupted with windows and hspl2 1024 doesn't automatically try to reestablish connection, hence the error message. Anyways, i left the device at boot loader after error message popped up, closed hspl2 1024 and reopened it. This time it immediately recognized the connection with my device and installed. 30 seconds and done!! I hope this helps!!!!
Click to expand...
Click to collapse
wow im gonna try but its giving me the same error and it suck im running window 7 and it reconize and then it gives me ther error an it stay plug in usb but doesnt recognize it
IT WORKED
hey all, i posted above, and for the life of me i couldnt get it to work. i know someone above posted to run it from a desktop, and from a port behond the CPU tower. for me, i only have a laptop and i couldnt get it to work. however, i used a different laptop and it work just fine!
i havent tried the "run as admin" option, but if you can, try a different laptop or a desktop...
THANKS FOR ALL THE HELP GUYS!
thebeach562 said:
hey all, i posted above, and for the life of me i couldnt get it to work. I know someone above posted to run it from a desktop, and from a port behond the cpu tower. For me, i only have a laptop and i couldnt get it to work. However, i used a different laptop and it work just fine!
I havent tried the "run as admin" option, but if you can, try a different laptop or a desktop...
Thanks for all the help guys!
i use hspl2 1024 it work
Click to expand...
Click to collapse
griffinj01 said:
I was doing some reading here while troubleshooting the same error while trying to load hspl2 1024 via USB. I'm far from an expert, but the experience I just had may be of some use. For starters, I'm running Windows Vista 64 and the required Windows Mobile Device Center 6.1. After downgrading to 2.08, which worked fine, I setup active sync and ran hspl2 1024 as admin. After waiting about 30 seconds, Windows comes back with this critical error message. It seems that when the device sent to boot loader (tri colored screen), the USB connection is interrupted with windows and hspl2 1024 doesn't automatically try to reestablish connection, hence the error message. Anyways, I left the device at boot loader after error message popped up, closed hspl2 1024 and reopened it. This time it immediately recognized the connection with my device and installed. 30 seconds and done!! I hope this helps!!!!
Click to expand...
Click to collapse
ok so im getting this same error message but when i try to install a rom not the hspl 1024. Lets see if this helps.Thanks!
hey guys,
i had the same problem before. for me it was because my sdcard. make sure you either remove it when flashing the hspl, because when you downgrade to 2.08 you have a LEOIMG.nbh file in your card, and it will interfere with the usb trying to flash. probably the same thing is happening with the problem with flashing the rom too. so remove the sdcard when flashing the hspl, but if you have a autoinstall file when installing a ROM, then either rename or remove the LEOIMG..bh on the sdcard before flashing rom or radio after.
critical error, same as everyone else
im on a 64-bit version of win7. i was having the same problem. i ran the hspl exe as admin and it worked. just wanted to confirm solution.
griffinj01 said:
I was doing some reading here while troubleshooting the same error while trying to load hspl2 1024 via USB. I'm far from an expert, but the experience I just had may be of some use. For starters, I'm running Windows Vista 64 and the required Windows Mobile Device Center 6.1. After downgrading to 2.08, which worked fine, I setup active sync and ran hspl2 1024 as admin. After waiting about 30 seconds, Windows comes back with this critical error message. It seems that when the device sent to boot loader (tri colored screen), the USB connection is interrupted with windows and hspl2 1024 doesn't automatically try to reestablish connection, hence the error message. Anyways, I left the device at boot loader after error message popped up, closed hspl2 1024 and reopened it. This time it immediately recognized the connection with my device and installed. 30 seconds and done!! I hope this helps!!!!
Click to expand...
Click to collapse
Thank you very much for that! I am now HSPL'd! Now on to custom roms...
Naveen
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
+1
i have the same problem here!!
Guys pls help
The usb message your seeing means it is connected by usb. You should be able to continue. Not sure activesync recognises magldr.
Sent from my HTC HD2 using XDA App
Im sorry if im wrong but ofcourse your phone wont get regonized by active sync anymore because you took off windows mobile from your phone when you installed nand. Just be paitence when u connect your phone to your computer and it will deffently get regonized and you will be ready to flash new roms.
Sent from my HTC bravo using XDA App
dustin1939 said:
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
Click to expand...
Click to collapse
hatomee91 said:
+1
i have the same problem here!!
Guys pls help
Click to expand...
Click to collapse
When you see this usb...usb you are connected.
Now right click daf.exe or android inastaller.exe or whatever the name and choose "run as administrator" and the install should start
read the second link in my signature
It says it is connected but when I run as admin it says usb init failure. What do I do then?
Sent from my HTC HD2 using XDA App
I saw a few posts about this problem. The fix is to reflash HSPL and load Magldr again.
http://forum.xda-developers.com/showpost.php?p=10351794&postcount=976
This is what helped me... Courtesy OP http://forum.xda-developers.com/showthread.php?t=893948
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
Hello,
When I try to flash my radio or ROM I am getting this error:
[ERROR 266]: UPDATE ERROR
The Update Utility cannot get response from your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
Click to expand...
Click to collapse
I attached a capture to this post.
Here are the details about my actual device:
LEO512 - Orange France
Radio 2.06.51.07
ROM 1.66.406.1 FRE
HSPL3 2.08.HSPL
I actually tried to flash to official ROM WWE 3.14.405.2 and radio 2.15.50.14 but none of them worked out, both failing with the described error. I tried to flash through ActiveSync and through the bootloader. I also tried to remove SD in both situation and I actually do not have SIM card in the phone.
When comes to change the SPL I do not have any problem and can switch smoothly.
When you use ActiveSync is your computer able to connect to youf HD2? If not then try a different USB port as the one you are using must not have the proper drivers for yoir HD2 installed. You can also try another computer and another USB cable.
Thanks.
Changing of USB port definitely solved the problem.
tried every thing erro 264, 266 for me
mine is still stuck i tried all of them
I have madldr 1.11 i just want to upgrade to 1.13 but no upgrade work for me
i dont know wat to do
Yenly said:
mine is still stuck i tried all of them
I have madldr 1.11 i just want to upgrade to 1.13 but no upgrade work for me
i dont know wat to do
Click to expand...
Click to collapse
You can flash MAGLDR via your SD card just like you can a ROM or radio. Just copy the MAGLDR.nbh file in the MAGLDR folder you get when you exstract the zip file you download to the root of your SD card.. Then change the name of the coppied file to leoimg.nbh. Next as you turn your HD2 on hold down the volume down button. You will see the multicolor bootloader screen come up as soon as you see the word "Searching" on the screen let go of the volume down button and follow any on screen instructions. This will flash MAGLDR 1.13 to your HD2.
Just wanted to add that I was having this problem on Win7 64bit, initially windows update tried to grab drivers. It installed something unnamed but still wouldn't run the ROM update. I switched USB ports as suggested above and then Windows Update found a Qualcomm CDMA driver and installed that. This it seems did the trick as I'm now updating.
Greetings to all.
this problem has happened to me too. site (windows) to control said activesync. Then I did it to me ...... I realized that there were some driver conflict of some programs cooking ..... Removed from (windows7) now works perfectly. Thus check the newly installed programs.
Hello, please help me!! I wanted to install android on my new HTC HD2.
What I did:
Installed hardslp 2.08
Radio 2.15.50.14
MAGLDR 1.13
after installed magldr it sent me to it's menu. I select USB flasher and then go to my Android Rom unrared folder, i run DAF file. Then it starts to isntall something(1-3) seconds. says everything is done and thren reboot system and says "nand kernel open failed" and sends me back to menu.
i tried many times and with another Android but nothing helped! Tried to install Clockwork mode, same problem. Then tried to isntall 29 but this program did not want to install saying that it couldnt connect with HD2. I thought it is something wrong with my computer. I borrowed my friend's laptop and tried to install Android from his. Installing process took a little bit more time but the same problem: It congratulates me that everything is done then reboots, then kernel error appears for 1 sec and sends me back to main menu.
Then I deleted Sync program(windws phone something..) and tried new ROM. Now DAF program says me next:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Please help me !!
Hi,
Which ROM are you trying to install?
Which operating system have you got on your pc/laptop?
Are you right clicking on the DAF and selecting run as administrator?
Also when you go to USB Flasher and connect your HD2 to your computer are you giving a minute to establish a connection?
Give it a minute to establish connection, and try another Rom. Maybe your HD2 is 512 (EU), and you are trying to install ROM for 1024 HD2 (Tmobile US).
Did you read, maybe it is clockwork rom, not magldr?
Here is the link for MAGLDR flashing rom, stock Desire
http://forum.xda-developers.com/showthread.php?t=893620
it does not support ext partitions on sd card. But you can try another roms. And if you dont know how to flash it via Clockwork, here is the link
http://forum.xda-developers.com/showthread.php?t=1044830
p.s. Better ROMs are that that you flash via clockwork. Study that, it is easy.
Thanks to guys who wrote that tutorials
And here are all ROMs for HD2
http://forum.xda-developers.com/showthread.php?t=1044830
Hi
I have hd2 and display white
When I try (vol- + pwr) I see "spl-3.03.0000 XE" I try change spl but I can't
When created goldcard and write this card leoimg.nbh I see white screen and "Loading..." and nothing to do ...
Any idea ??
sorry my bad english
You need HSPL4 to downgrade your spl.
Yes, but I don't know how ?
When I try write hspl I see this error
"critical error
Flow: 00000005
Error code: 00000005
Description: Bad SPL version"
Where I found correct spl version ???
Of course it will say Bad SPL version.
You need HSPL4 .. This one : http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Also, run as administrator, always do so.
When I connect hd2 I see "usb" and I choose hspl but then nothing to do
"please wait while installing HSPL..."
Leo stay 3 color "usb" but not writting to him
If you're still on Bootloader (tri-colour) screen then the installation is not happening.
Try clicking on cancel, rebooting your device and trying again. If the problem presist, tell me what Operating System you have.
This same problem, I have Windows xp 32 bit
I tried on 3 computers this same system (xp) and still hspl not writing...
Maybe you don't have the required drivers?
reinstall ActiveSync, the drivers sould be automatically installed with the package.
But if you were on Windows 7, the process would've been much simpler.
I was reinstall ActiveSync and not result, problem still this same
Maybe try it on a Windows 7 ?
I've looked for similar problems, but all were reporting that it worked after another try.
try it on Windows 7
this same on WP7 and error
"critical error
Flow:00000006
Error code:00000014
Description: Unknown"
Is your phone a t-mobile or european.
Based on what your device, download the corresponding original Winmo ROM and flash normally through usb ..
The phone is european
Winmo Rom, you mean Windows Mobile ??
I tried write original Windows Mobile 6.5 with this page http://firma.sunnysoft.cz/htc/ or www.htc.com
and "1%" then error 270 update error...
I have a question, what was the last thing you did .. before your device started doing this?
Precisely because I do not know this phone and I do not have client contact with him
well, I have told you what should have fixed it .. but since it hasn't been fixed, it seems that the client has done some real "sh&%" to that phone .
I'm at the end of my knowledge, maybe other members can help you?
Furthermore, you are on the Original SPL which means you can get HTC's warranty (if it is still under it)
There is no guarantee in any case, thank you for your time
My english Not good you must orginal Rom Flash in usb Mode go to htc com and Download withe your imai your specifik Stork Rom and flash over usb Mode -down key on your smardfone on start(usb Mode)and Flash storkrom.
Sent from my HD2 using XDA Windows Phone 7 App
None of this, I tried