Database Users

[Q] Problem while flashing Nand Android on HD2---won't reboot after Go Go Go! screen

So i used this *thread* to flash the android Nand on my HD2 and i followed all the steps, and then i ended up with a screen as below
123456
GO GO GO!
Typically it is supposed to reboot and go to the Android screen. But it didn't and now it is stuck. I tried hard resetting with power and volume button but no luck and infact none of the buttons work. Even i took the battery out but it comes back to the same screen.
So how do i go back to the WIN 6.5 now. PLzzz somebody help me. I'm sure somebody must have same problem coz i saw in some post that couple of people had the same problem.
PLZ help!!

dude, to go to magldr menu hold end key while booting, and to get to the bootloader to be able to flash a winmo rom, just hold volume down key while booting.
GOGOGO! issue was solved on magldr 1.11, do you have magldr 1.11? If you don't just flash it when you're on bootloader (rainbow screen).

ok. i downloaded the V1.11. But i don't see the tricolor thing. all i see is the Boot Menu with 10 options on it. and when i tried to flash it the connection was unsuccessful. My PC won't connect to the phone then how would i flash it??

patelk3 said:
ok. i downloaded the V1.11. But i don't see the tricolor thing. all i see is the Boot Menu with 10 options on it. and when i tried to flash it the connection was unsuccessful. My PC won't connect to the phone then how would i flash it??
Click to expand...
Click to collapse
you should:
power-off device
press the vol- button and power button together.
then flash 1.11
good luck

Maybe you can help me aswell?
I've tried flashing cmn 6.1 and it works (followed all steps of guide: i have magdlr 1.11, hardspl 2.08 and radio on my dutty rom 2.15.50..). So now i have cmn 6.1 nand. But if i try to repeat the same with Cotulla's Nand or MDJ's - i stuck on error:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I get it once i connect usb cable to usb flasher (it says usb is connected) and launch daf.exe and press 2 times next till it starts checking if phone is connected. Any suggestions how to solve it? Please, help me

May be just reconnect USB cable.
But first make sure that in PC's device manager You have uncheck Save energy option ( it lets to turn off USB port for energy savings)
Sent from my HTC HD2 using XDA App

BimBooTheGreat said:
Maybe you can help me aswell?
I've tried flashing cmn 6.1 and it works (followed all steps of guide: i have magdlr 1.11, hardspl 2.08 and radio on my dutty rom 2.15.50..). So now i have cmn 6.1 nand. But if i try to repeat the same with Cotulla's Nand or MDJ's - i stuck on error:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I get it once i connect usb cable to usb flasher (it says usb is connected) and launch daf.exe and press 2 times next till it starts checking if phone is connected. Any suggestions how to solve it? Please, help me
Click to expand...
Click to collapse
You get that error if you don't run DFT as administrator. Right click on the file, run as administrator.
Sent from my HTC HD2 using XDA App

Thanks guys. It worked and now i have android on my HD2 which i love.
But there is a small problem with it. My data connection won't work, the wifi does.
Any ideas??

patelk3 said:
Thanks guys. It worked and now i have android on my HD2 which i love.
But there is a small problem with it. My data connection won't work, the wifi does.
Any ideas??
Click to expand...
Click to collapse
Go to the FAQ link in my signature, there you will find the TMO APN details which you need to enter manually.

What rom you install?
What rom you install?
Some roms no get data or mms in T-mobile US

neowolfx said:
What rom you install?
Some roms no get data or mms in T-mobile US
Click to expand...
Click to collapse
They should, it's just that you need to manually enter the APN details.

i tried entering the APN manually and it worked.
Thank you everyone for the help.
Android is so much faster and better...just wow. I'm lovin' it.
BTW i used the instructions given on this blog

I got the same thing, nothing after the go go go. I just rebooted my phone and it loaded fine. Only issue I have is the G-sensor freeze. Love this build though!
Sent from my HTC HD2 using XDA App

Help Help Help
I followed a video, flashed my phone, ran the dft and it says it was successful. Now when it rebooted itself, it would boot, but only to the dft screen and then cut back off and do the same 1234 go go go. please tell me what im missing. i know im close but damn im ready for android already lol please help.

[Q] Widnows Mobile sync

People help I'd tried everything ang nothing help. I'm with windows7 on my computer and NAND DFT android rom on my HD2. Before instaling MAGLRD version 1.11 everything was ok but now when i plug my device nothing hapen on Windows Mobile Device Center it stays always not conected. I sync my phone with "HTC sync" and there is ok. I'd reinstalled all and again nothing. I want to sync and install MAGLDR 1.13 and from there install from sd card new android rom, becouse now i cant access in SD from MAGLDR i don't know why. If you have any sugestions please help.

Don't worry about WMDC. Boot to bootloader and connect to pc. Does "usb" show up on screen or does it still stay at "serial"?

ClydeB1 said:
Don't worry about WMDC. Boot to bootloader and connect to pc. Does "usb" show up on screen or does it still stay at "serial"?
Click to expand...
Click to collapse
On the three colored screen is showed USB and on flshing via USB is showing USB but cant sync to install new MAGLDR

BaHkaTa2211 said:
On the three colored screen is showed USB and on flshing via USB is showing USB but cant sync to install new MAGLDR
Click to expand...
Click to collapse
You don't need to sync. If usb shows on screen then just run the romupdateutility.exe file.

Now it's ok thank's you can delete threat if you want

magldr issue

I am trying to use the magldr flashed and it says waiting for usb... Instead of the usb... Usb message and will not see my computer and device manager has a driver named magldr that says its not installed correctly.... Is there a magldr driver I need to get cause I can't flash crap

Your computer is suppose to imstall the driver for you to use MAGLDR from your phone when you connect it to the computer abd you are in option #4 USB Mass Stg or option #5 USB Flasher. If it did not install properly, try another USB port, or try to manually update the drivers by going to Device manager and right click on the MAGLDR icon or the icon for your phone which ever one it shows it as in Device manager. Select update drives amdcthen select from computer and find your phone on the computer and click on it and tjen click dome at the bottom of the window you are in it should updatecthe driver from hour HD2. If not unlug hour HD2 try deleting the drivers for it im Device manager and then plug your phone back in to see if it will install the drivers then. Also when you select option #5 USB Flasher make sure your phone says USB...USB on it then connect it.

This HTC I bought from someone. Who had had the phone flashed with a ****ty Rom and it has magldr 1.12 .... I am not able to flash any Rom or revert to winm 6.5 it will not find any driver for magldr usb flasher have tried everything its not the usb and not the device driver won't find the driver... So where is this mythical driver and how do I get it into device manager?

restar the phone keep volume press down . then windows recognise the usb and flash any windows 6.5

Won't that boot the phone into the multicolored bootloader?

[email protected] said:
I am trying to use the magldr flashed and it says waiting for usb... Instead of the usb... Usb message and will not see my computer and device manager has a driver named magldr that says its not installed correctly.... Is there a magldr driver I need to get cause I can't flash crap
Click to expand...
Click to collapse
Hi,
I have the same problem which I can solve by installing Microsoft Activesync.
This will give you the necessary drivers to load MAGLDR and USB flasher etc.

So I install activesync on my puter?

[email protected] said:
So I install activesync on my puter?
Click to expand...
Click to collapse
Yes,that' right.

Win7 wont let me install active sync some compatibility issue

[email protected] said:
Win7 wont let me install active sync some compatibility issue
Click to expand...
Click to collapse
You have to use Windows Mobile Device Center with Windows 7. You can get it from the same placecas ActiveSync.

[email protected] said:
Won't that boot the phone into the multicolored bootloader?
Click to expand...
Click to collapse
Because you were talking about windows 6.5 of course you need to go the magical multicolored bootloader.
Sent from my HTC HD2 using XDA App

My fix to this....
I had the same problem earlier this evening. I rebooted both the laptop and the phone and it worked fine after that. For some reason, my drivers wouldn't detect MAGDLR or CWM in USB Storage mode... Odd enough that this was the first time it happened...

[Q] Magldr USB Flasher not working

I have searched and searched and cant find a reason why this isnt working. I have a new hd2 with hspl and magldr 1.13. I have windows mobile device center on my pc. I have downloaded a partition to flash so I can install a rom, but the usb flasher option gets stuck on Wait USB... This is not my first hd2, and i recall having this problem before. Can someone please point me in the right direction? When I put the phone in bootloader and plug it in, my comp. recognizes the phone but not in magldr.
Edit: I have an old hd2 (touchscreen doesnt work), and tried the USB Flasher and had the same problem.

3agle said:
I have searched and searched and cant find a reason why this isnt working. I have a new hd2 with hspl and magldr 1.13. I have windows mobile device center on my pc. I have downloaded a partition to flash so I can install a rom, but the usb flasher option gets stuck on Wait USB... This is not my first hd2, and i recall having this problem before. Can someone please point me in the right direction? When I put the phone in bootloader and plug it in, my comp. recognizes the phone but not in magldr.
Edit: I have an old hd2 (touchscreen doesnt work), and tried the USB Flasher and had the same problem.
Click to expand...
Click to collapse
what hardspl do u have........i have 2.08,don't use the latest 3.0.3,magldr doesn't like it lol

[Q] Need help magdlr- DAF exe?

Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!

spuati as administrator through ROMUpdateUtility
not by DAF

drobcristi said:
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
run "ROMUpdateUtility.exe" instead

Thx
palokm said:
spuati as administrator through ROMUpdateUtility
not by DAF
Click to expand...
Click to collapse
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!

The ROM Update Utility doesen't work couse can not establish a connection to my phone

you must run as admin
procedure
hspl 2.08
task 29
radio rom 2.15
aMAGLDR v1.13

drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Try connecting your phone to the back of your PC in one of the USB ports. Do not use the front ones.
Then when you run the Update utility right click on it and RUN as Administrator.
Hope that works.

younut said:
Please respect the rules !!!
I hate this kind of Shi*
GO ON ANSWERS AND QUESTIONS ... IDIOT!
Click to expand...
Click to collapse
That's quite hypocritical, saying that you hate people breaking forum rules then swearing and calling another member an idiot. If you're going to flame him (as I indeed was about to as well, but in a much nicer way), at least help him too, and just warn him about the mistake and report the thread for maintenance.
@ OP, what exactly are you trying to do? From what I understand, you already have MAGLDR and you're trying to flash MAGLDR again? There isn't any point to that, from here onwards the steps are to flash CWM with the right partition, then your desired ROM. Follow this guide.

drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Copy Pasting the half of the first post doesn't help us finding out what the problem is, Respect the people who spend time helping you out without getting anything!
So, Here is what you did:
You HSPL'd your device,
Installed Magldr,
Booted the device and pressed "USB Flasher"
Connected device to the pc, and tried to install the software but got a readme error?
Well I have that sometimes, but I just can go further.. Very strange.

Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Give a thanks if you found this helpful

adil1508 said:
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Click to expand...
Click to collapse
not accurate.
The word 'sync' makes people think you have to actually get a connection to activesync/wmdc the program,,,,,, you don't.
put the phone into bootloader (stripey screen) connect usb, when serial becomes usb, thats an activesync connection and you can flash. activesync teh program will not show a connection when you do this. the line ''get an activesync connection'' has been confusing people for years.