I am trying to use the magldr flashed and it says waiting for usb... Instead of the usb... Usb message and will not see my computer and device manager has a driver named magldr that says its not installed correctly.... Is there a magldr driver I need to get cause I can't flash crap
Your computer is suppose to imstall the driver for you to use MAGLDR from your phone when you connect it to the computer abd you are in option #4 USB Mass Stg or option #5 USB Flasher. If it did not install properly, try another USB port, or try to manually update the drivers by going to Device manager and right click on the MAGLDR icon or the icon for your phone which ever one it shows it as in Device manager. Select update drives amdcthen select from computer and find your phone on the computer and click on it and tjen click dome at the bottom of the window you are in it should updatecthe driver from hour HD2. If not unlug hour HD2 try deleting the drivers for it im Device manager and then plug your phone back in to see if it will install the drivers then. Also when you select option #5 USB Flasher make sure your phone says USB...USB on it then connect it.
This HTC I bought from someone. Who had had the phone flashed with a ****ty Rom and it has magldr 1.12 .... I am not able to flash any Rom or revert to winm 6.5 it will not find any driver for magldr usb flasher have tried everything its not the usb and not the device driver won't find the driver... So where is this mythical driver and how do I get it into device manager?
restar the phone keep volume press down . then windows recognise the usb and flash any windows 6.5
Won't that boot the phone into the multicolored bootloader?
[email protected] said:
I am trying to use the magldr flashed and it says waiting for usb... Instead of the usb... Usb message and will not see my computer and device manager has a driver named magldr that says its not installed correctly.... Is there a magldr driver I need to get cause I can't flash crap
Click to expand...
Click to collapse
Hi,
I have the same problem which I can solve by installing Microsoft Activesync.
This will give you the necessary drivers to load MAGLDR and USB flasher etc.
So I install activesync on my puter?
[email protected] said:
So I install activesync on my puter?
Click to expand...
Click to collapse
Yes,that' right.
Win7 wont let me install active sync some compatibility issue
[email protected] said:
Win7 wont let me install active sync some compatibility issue
Click to expand...
Click to collapse
You have to use Windows Mobile Device Center with Windows 7. You can get it from the same placecas ActiveSync.
[email protected] said:
Won't that boot the phone into the multicolored bootloader?
Click to expand...
Click to collapse
Because you were talking about windows 6.5 of course you need to go the magical multicolored bootloader.
Sent from my HTC HD2 using XDA App
My fix to this....
I had the same problem earlier this evening. I rebooted both the laptop and the phone and it worked fine after that. For some reason, my drivers wouldn't detect MAGDLR or CWM in USB Storage mode... Odd enough that this was the first time it happened...
Related
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
+1
i have the same problem here!!
Guys pls help
The usb message your seeing means it is connected by usb. You should be able to continue. Not sure activesync recognises magldr.
Sent from my HTC HD2 using XDA App
Im sorry if im wrong but ofcourse your phone wont get regonized by active sync anymore because you took off windows mobile from your phone when you installed nand. Just be paitence when u connect your phone to your computer and it will deffently get regonized and you will be ready to flash new roms.
Sent from my HTC bravo using XDA App
dustin1939 said:
Im in the process of loading the steps for the NAND Android ROM and right after i loaded the MAGLDR 1.11 my active synce stopped working. Now i can't load NAND Android ROM cause my computer wont recognize my phone by activesync.
All my phone says whenever i turn it on is:
Android Flasher Mode
Wait USB...USB
Does anyone have any idea what i can do to fix it. forgive me im a newb.
Click to expand...
Click to collapse
hatomee91 said:
+1
i have the same problem here!!
Guys pls help
Click to expand...
Click to collapse
When you see this usb...usb you are connected.
Now right click daf.exe or android inastaller.exe or whatever the name and choose "run as administrator" and the install should start
read the second link in my signature
It says it is connected but when I run as admin it says usb init failure. What do I do then?
Sent from my HTC HD2 using XDA App
I saw a few posts about this problem. The fix is to reflash HSPL and load Magldr again.
http://forum.xda-developers.com/showpost.php?p=10351794&postcount=976
This is what helped me... Courtesy OP http://forum.xda-developers.com/showthread.php?t=893948
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
People help I'd tried everything ang nothing help. I'm with windows7 on my computer and NAND DFT android rom on my HD2. Before instaling MAGLRD version 1.11 everything was ok but now when i plug my device nothing hapen on Windows Mobile Device Center it stays always not conected. I sync my phone with "HTC sync" and there is ok. I'd reinstalled all and again nothing. I want to sync and install MAGLDR 1.13 and from there install from sd card new android rom, becouse now i cant access in SD from MAGLDR i don't know why. If you have any sugestions please help.
Don't worry about WMDC. Boot to bootloader and connect to pc. Does "usb" show up on screen or does it still stay at "serial"?
ClydeB1 said:
Don't worry about WMDC. Boot to bootloader and connect to pc. Does "usb" show up on screen or does it still stay at "serial"?
Click to expand...
Click to collapse
On the three colored screen is showed USB and on flshing via USB is showing USB but cant sync to install new MAGLDR
BaHkaTa2211 said:
On the three colored screen is showed USB and on flshing via USB is showing USB but cant sync to install new MAGLDR
Click to expand...
Click to collapse
You don't need to sync. If usb shows on screen then just run the romupdateutility.exe file.
Now it's ok thank's you can delete threat if you want
I have searched and searched and cant find a reason why this isnt working. I have a new hd2 with hspl and magldr 1.13. I have windows mobile device center on my pc. I have downloaded a partition to flash so I can install a rom, but the usb flasher option gets stuck on Wait USB... This is not my first hd2, and i recall having this problem before. Can someone please point me in the right direction? When I put the phone in bootloader and plug it in, my comp. recognizes the phone but not in magldr.
Edit: I have an old hd2 (touchscreen doesnt work), and tried the USB Flasher and had the same problem.
3agle said:
I have searched and searched and cant find a reason why this isnt working. I have a new hd2 with hspl and magldr 1.13. I have windows mobile device center on my pc. I have downloaded a partition to flash so I can install a rom, but the usb flasher option gets stuck on Wait USB... This is not my first hd2, and i recall having this problem before. Can someone please point me in the right direction? When I put the phone in bootloader and plug it in, my comp. recognizes the phone but not in magldr.
Edit: I have an old hd2 (touchscreen doesnt work), and tried the USB Flasher and had the same problem.
Click to expand...
Click to collapse
what hardspl do u have........i have 2.08,don't use the latest 3.0.3,magldr doesn't like it lol
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
spuati as administrator through ROMUpdateUtility
not by DAF
drobcristi said:
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
run "ROMUpdateUtility.exe" instead
Thx
palokm said:
spuati as administrator through ROMUpdateUtility
not by DAF
Click to expand...
Click to collapse
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
The ROM Update Utility doesen't work couse can not establish a connection to my phone
you must run as admin
procedure
hspl 2.08
task 29
radio rom 2.15
aMAGLDR v1.13
drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Try connecting your phone to the back of your PC in one of the USB ports. Do not use the front ones.
Then when you run the Update utility right click on it and RUN as Administrator.
Hope that works.
younut said:
Please respect the rules !!!
I hate this kind of Shi*
GO ON ANSWERS AND QUESTIONS ... IDIOT!
Click to expand...
Click to collapse
That's quite hypocritical, saying that you hate people breaking forum rules then swearing and calling another member an idiot. If you're going to flame him (as I indeed was about to as well, but in a much nicer way), at least help him too, and just warn him about the mistake and report the thread for maintenance.
@ OP, what exactly are you trying to do? From what I understand, you already have MAGLDR and you're trying to flash MAGLDR again? There isn't any point to that, from here onwards the steps are to flash CWM with the right partition, then your desired ROM. Follow this guide.
drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Copy Pasting the half of the first post doesn't help us finding out what the problem is, Respect the people who spend time helping you out without getting anything!
So, Here is what you did:
You HSPL'd your device,
Installed Magldr,
Booted the device and pressed "USB Flasher"
Connected device to the pc, and tried to install the software but got a readme error?
Well I have that sometimes, but I just can go further.. Very strange.
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Give a thanks if you found this helpful
adil1508 said:
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Click to expand...
Click to collapse
not accurate.
The word 'sync' makes people think you have to actually get a connection to activesync/wmdc the program,,,,,, you don't.
put the phone into bootloader (stripey screen) connect usb, when serial becomes usb, thats an activesync connection and you can flash. activesync teh program will not show a connection when you do this. the line ''get an activesync connection'' has been confusing people for years.
Hello
Sorry to bother but I really need your help!! I tried for several times but always end up by quitting. It´s too confusing
I have an HTC HD2 (MIUI - Gingerbread HD2 v2.4.13, MAGLDR V1.11) and want to change to WP 7 mango. What is the best and simplest procedure to do?!
Appreciate the patience!!!
Thank you
Pedro
connect usb
phone into magldr menu - USB flasher
run teh mango flash.
be warned your sd card will be fully formatted during this process, so back up anything you wanna save.
samsamuel said:
connect usb
phone into magldr menu - USB flasher
run teh mango flash.
be warned your sd card will be fully formatted during this process, so back up anything you wanna save.
Click to expand...
Click to collapse
yes but is always saying "waiting for usb connetion" for a long time and noting happens
Maybe i miss something...
Then it must be drivers or something, 64bit windows gives this problem, as does runningwindows on a virtualvirtual machine.
Stress79 said:
yes but is always saying "waiting for usb connetion" for a long time and noting happens
Maybe i miss something...
Click to expand...
Click to collapse
#1: You need magldr 1.12 or later to run WP, so update your magldr. (Just install the latest.)
#2: Sometimes MAGLDR may not show "... - USB", it may appear AFTER starting the flasher, so ignore the disappearance of "...- USB" and flash normally. (This is usual, but you may DO be missing drivers or sth)