Related
had this not so great idea last night that I would flash my nand android ROM for my HTC HD2 on Tmobile UK, by formatting the SD card then reinstalling CWD and flashing the ROM...
Unfortunately my fone will not switch on, I can get it into bootloader but do not know what to do from here...
any ideas?
I think I need to reinstall magdlr 1.3, then clockwork mod then my nand android rom, can anyone confirm this is right?
please help
ta
whilst I can get into bootloader and it says USB , my PC will not let me access the SD card, nothing happens at all like when the Open folder pop up appears, well it doesnt....
what have I done??
Is the HSPL 3 already installed on the phone?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
You need to take your sd card out of your phone and use a card reader. There is a problem with Magdlr usb so that would be the only way to copy things to and from the sd card.
I would do a task29, reinstall magldr, clockwork and then go into clockwork and install.
Hope this helps.
bodyman
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
xirokx said:
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
Click to expand...
Click to collapse
quick seaches found this:
Task29
and you need to be in the bootloader to install magldr -- you use RUU to install that. Then once into madldr, then you can install clockwork -- that uses DAF.
Also, you should upgrade to 3.0.
Hope this helps
Please go read some n00b guides, everything you asked about here is VERY cleary documented, There is absolutley no need at all for this type of topic.
Not trying to be an arse but its just really annoying seeing the forums flooded with these types of topics daily and its because people dont follow simple logic and look at stickies or guide topics prior to jumping in.
trouble is when I connect my phone via usb to PC in order to update to HARDSPL3 nothing happens...
Its like my phone just will not sync with my pc
Even if I get the phone to bootloader mode, where it first says serial, when I connect the fone it does say USB but nothing else happens...
Where are these guides? why are they so hidden...
I dont know if my fone is bricked...please help
If I where you, I would start from scatch.
Go to bootloader when it says USB flash stock WM6.5
Flash HSPL 2.08
Flash MAGLDR
and so and so...
Same problem here with my boys phone. Only thing is, I can't flash anything and wmdc won't recognize the hd2. I feel like an ars lol. Just go buy an android phone and leave winmo in the dust ;-P You might enjoy unloading on it with an ar15 though muahaha
Sent from my HTC Glacier using XDA App
Try using different UBS port or UBS cord and make sure when in bootload your pc show a driver connecting with it or it won't work. And if your on window Vista or 7 try right clicking and run as admin
Also do not have your SD card in while doing this
Sent from my HTC Desire using XDA App
heres an update:
I installed HARDSPL 3.0
The phone then restarted and is working however I now need to install TASK29
But from lets call it my nand ROM main screen one it has loaded, when I connect attach a USB cable the phone will not sync will windows mobile device centre so I unable to perform TASK29
How can I get around this?
Its great the phone is working again however all I am confident after I manage to run TASK29 it will be clean so that I can install another NAND rom on to it...
Just desperately need my pc OS windows 7 to now recognise my phone so TASK 29 will work, but how?
thanks guys for your help
the plot thickens....
I went into booloader and it still shows SPL2.08 when I downloaded and installed HARDSPL3??? This is the filename I downloaded and installed HSPL3_PKG
Also after removing SD card, the phone boots into MAGDLR v1.13 and then keeps looping into reboot...
On a different note, this time when I phone switched on with USB attached but without SD CARD, my pc OS windows 7 installed a driver and it sees it but now I cannot get into the main ROM screen to run TASK29....
Gonna put the SD Card back in and hope it gets me there that way..will report back in 2 mins..
thanks for your help
so i reinstalled magldr 1.13 and clockworkmod but now when I am in magldr and go to boot ad sd I get the following error message:
load zImage
k: zimage
SD KERNAL OPEN FAILED
it cannot find clockwork mod is that right?
where do i go from here?
thanks for your help
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
Click to expand...
Click to collapse
3.0 is just an update to 2.08 that works for the newer hd2's
also, task29 will format your NAND -- it is like the ultimate hard reset. I use it when I switch from different roms. That way there is no residuals left over from any previous roms that may or may not cause problems.
check here for any ?'s that you might have. All stickies have been rolled up into one thread.
Well i noticed that task29 doesn't wipe everyhing. I had issues with various rome for a while, I tried task29 many times with no success, the only thing that solved theme where flashing stock 6.5...
And don't go to spl3 or you won't be able to flash magldr, stay on 2.08
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks guys
Click to expand...
Click to collapse
Is this a joke? i mean, the stickies are there, you only need to read them and follow the steps you have tutorials and howtos in task29 thread, then in the hardspl thread and in the hd2 sections (sd,nand).
anyway, i am glad, you worked it out
It is said that you have to hold the power button to load MAGLDR after resetting the phone, but when I reset the phone it automatically boots to MAGLDR, instead of WM 6.5. Can you guys tell me how to access WM 6.5 from MAGLDR?
I forgot to mention that I always get this message before it boots to MAGLDR after resetting.
Rebooting Android from SD
Android loads at 11000000
From MicroSD
Load zIMAGE
K:\ zIMAGE
SD Kernal Open Failed.
Should I be concerned?
I haven't installed Android yet, but I'm in the process of installing Clockwork 1.3
I also tried to do a factory reset through MAGLDR, but it only goes back to the MAGLDR main screen. Help? Please?
First of all, use the "edit post" button to add text to the first post instead of making two new
Yesterday I got the exact same problem. Someone said that it is because the MAGLDR can't see the wrongly flashed ROM. However, I did not notice that it is something wrong with it.
What ROM do you have and which HSPL version ?
I had WinMo 1.46 stock and HSPL 2.08
my apologies.
stock? i'm using Radio 2.15 HSPL 2.08
did you correct your problem?
would it be safe to manually hard reset?
You can't boot Windows Mobile 6.5 if you have MAGLDR installed. But there is simply way back - just run RUU with stock 1.48 ROM on your PC, while having your HD2 connected to PC (phone has to be in bootloader, that rainbow screen).
I didn't correct my problem. I had to flash WinMo back from the SD card but the raven_raven's method is also possible.
So raven, why I can't boot into WinMo with MAGLDR? I've seen many people doing that by not keeping the power button pressed
From what I know, it's impossible to boot into WM6.5 if you have MAGLDR on your device. Its purpose is to load Linux kernel, not WM .
I'm kinda confused right now
If you flashed MAGLDR, why would you want to use WinMo? The main purpose of MAGLDR is to boot Android/WP7 on the NAND. It over-writes the WinMo you had on it before.
The error you're getting, you shouldn't be worried about it at all. All it is is that you haven't flashed a ROM yet. What do you mean you're in the process of flashing Clockwork? It's not hard... just flash the DFT file on your PC via the USB Flasher option and you'll have Clockwork. Then you install your .zip ROM, reboot and you won't get an error anymore as you'll have a ROM flashed.
Thanks for the help. It is greatly appreciated.
I can't access the USB Flasher. When I connect my phone to my PC, my SD card doesn't show up, instead, its recognized as an "unspecified" MAGLDR driver. I can't do anything with that.
But I can access my SD card through USB Mass Storage, but I don't want to install DFT on Mass Storage when I'm told to use USB Flasher. I don't want to do anything stupid
Abagnale said:
I'm kinda confused right now
Click to expand...
Click to collapse
yea i'm confused as hell. i'm seriously considering going back to 6.5, i didn't know the process was this frustrating.
SuicideFriday said:
Thanks for the help. It is greatly appreciated.
I can't access the USB Flasher. When I connect my phone to my PC, my SD card doesn't show up, instead, its recognized as an "unspecified" MAGLDR driver. I can't do anything with that.
But I can access my SD card through USB Mass Storage, but I don't want to install DFT on Mass Storage when I'm told to use USB Flasher. I don't want to do anything stupid
Click to expand...
Click to collapse
the usb flasher option is not to mount your sd card, it is just used to flash files/roms via daf.exe. use the usb flasher to install clockworkmod1.3, once that is done boot back into magldr and go to ad recovery, and recovery should start. from there you can mount as usb mass storage. i belive the one in magldr doesn't work very well, or at all for some, the one in clockwork always seems to work well for me.
guys its simple your not supposed to use MAGLDR if your going ot go back WM6.5.
tunr your phone off. hold the volume down button and press the power button, do not let go of the volume button, its going to bring you a tri colored screen. once your in that screen plug in your USB cable to the phone and to your computer. once that is doen flash a official WM6.5 rom let it do what it does,its going to restart and there you go back on WM6.5
there is no way you can boot Win 6.5 if you got MAGLDR, never seen it here
(unless someone shows a video or something)
the only way that can be achieved is to go into bootloader (tricolor screen)
and flash Win 6.5
I thought MAGLDR was for dualbooting. I wanted to go back to 6.5 in case I ran into any problems with the android builds Nontheless, I successfully installed Cyanogenmod, and it works perfectly. I dont think i'll be going back to 6.5.
Thanks for the help, it was greatly appreciated.
Hold volume down and power button when turning the phone on, it will get you into tree color screen...then plug your phone into pc .....on the of run rom installer for win 6.5 and after it is done you should be able to boot into win 6.5.
Sent from my Android Powered HD2 using XDA App
Hi guys!
I have the same problem.
my question is if I the official ROM is it going to erase/format the old one that I had?
The reason is that I did not backup everything and it would be nice if I could go back and get the rest of my contacts...
Is there any way of having a dual boot
BEWARE: complete noob!!!
skilimavro said:
Hi guys!
I have the same problem.
my question is if I the official ROM is it going to erase/format the old one that I had?
The reason is that I did not backup everything and it would be nice if I could go back and get the rest of my contacts...
Is there any way of having a dual boot
BEWARE: complete noob!!!
Click to expand...
Click to collapse
Are you honestly incapable of reading? What kind of complete MORON flashes something to their phone without a full knowledge of exactly what it will do?! If you install WinMo again you will have lost all of your data that is on the internal storage of your phone, and to be honest you deserve it if you are stupid enough to flash something without reading about what it does.
On a more positive note, you can flash NAND Android instead of reflashing WinMo if you want, using this guide. Since you would go ahead and flash this without reading up about it, I should probably warn you that IT WILL DELETE WINMO FROM YOUR PHONE! Is that clear enough for you?
Nigeldg said:
Are you honestly incapable of reading? What kind of complete MORON flashes something to their phone without a full knowledge of exactly what it will do?! If you install WinMo again you will have lost all of your data that is on the internal storage of your phone, and to be honest you deserve it if you are stupid enough to flash something without reading about what it does.
On a more positive note, you can flash NAND Android instead of reflashing WinMo if you want, using this guide. Since you would go ahead and flash this without reading up about it, I should probably warn you that IT WILL DELETE WINMO FROM YOUR PHONE! Is that clear enough for you?
Click to expand...
Click to collapse
Calm down. Experiance is everything. Share it, he just asked nicley.
But at least he now know that his contacts will never come back lol
Sent from my HTC HD2
I attempted to install Android on my HD2 by following a guide over at HD2Forums, didn't go so well I ended up screwing up the partitions and I got an error saying that the SD card wasn't detected.
I uninstalled ( or I thought I did)
Now my phone will boot up in two diff. WM7s. One has all my info and everything correct the other is a bare install like the phone was never used.
I'm not trying to remove HSPL my re-flashing a fresh ROM. I'm having no luck. I've followed the steps here:
http://forum.xda-developers.com/showthread.php?t=623402
My screen never turns grey, it kinda flashes like it's going to change and returns to the tri-color.
If someone would point me in the right direction I would greatly appreciate it.
Well you started wrong! You should have read all he stickies in the XDA forums. That being said I don't know what you did but I for know that the process is first HSPL then MAGLDR then flash wp7 using MAGLDR. I don't know where you are stuck at. I believe you will lose most of your personal stuff unless you could use Zune to backup pics and video. If you have HSPL & MAGLDR you should be able to go from there if you can't even see MAGLDR HOLD DOWN POWER button to get to magldr menu. If you can't even get there then try turn off phone then power on holding the volume down button AND the power button go to tricolor screen check do you have HSPL from cotulla?
Sent from my HTC HD2 using XDA App
I read all the stickies on the site I was on.
However, I am running Cotulla 2011 aMagLDR v1.12
I am able to access the bootloader menu but none of the options that I am aware of will help me.
i assume you have the correct radio installed as well?
anyhow, as has been mentioned, go in to MAGLDR and use the USB flasher /update option, then run the WP7 install file from the PC make sure the SD is in your phone and is empty (it will get formatted).
now i cant remember if you do magldr then go to USB update and plug in the USB cable in at that point or plug it in first, anyhow, that should help.
If on the off chance its not being detected by the computer when you connect it to your PC then use a program called USBDVIEW, its very good for deleteing all your USB drivers and starting from scratch, very handy if things get a bit confused for it.
I dont know if this is the correct way so please correct me if I am wrong.
In your case I would do a completely clean install so do a task 29 and then everything from the beginning
dazza9075 said:
i assume you have the correct radio installed as well?
anyhow, as has been mentioned, go in to MAGLDR and use the USB flasher /update option, then run the WP7 install file from the PC make sure the SD is in your phone and is empty (it will get formatted).
now i cant remember if you do magldr then go to USB update and plug in the USB cable in at that point or plug it in first, anyhow, that should help.
If on the off chance its not being detected by the computer when you connect it to your PC then use a program called USBDVIEW, its very good for deleteing all your USB drivers and starting from scratch, very handy if things get a bit confused for it.
Click to expand...
Click to collapse
You win! This worked.
Finalforce1111 said:
I dont know if this is the correct way so please correct me if I am wrong.
In your case I would do a completely clean install so do a task 29 and then everything from the beginning
Click to expand...
Click to collapse
where can I perform this task 29?
techking08 said:
You win! This worked.
where can I perform this task 29?
Click to expand...
Click to collapse
You could have just searched the HTC Leo HD2 forums, but follow the link in my signature to get task29. Also, you probably should use MAGDLR 1.13 and read the "How To" of WP7 to find out the order of preparing your phone with HSPL and MAGDLR.
The thing is...reading all that you can before flashing ROM's will save a whole lot of frustrations...also keeping track of your forums on how-to do something. I save the links to all my how-to's in my browser.
i just put on nand rom for the first time, and i want to re-do it with american android, but when i try running magldr 1.13, it says usb not connected and i cant get past this to flash american android, any answers for this plz, ty much, error :260:
can you give us pls some more input on what you are doing exactly? Where does it get stucked, when you boot it or do you select something from the menu and then the problem with no usb connected occurs?
well when i go into magldr and try to get it to go into usb flash, so i can flash american android, it opens and i check the boxes and click next, then it scans for the usb, but it wont bring up an error, and it tells me to make sure my usb is connected and it is connected already???? im a noob at this so i cant explain to much into what im doing wrong, im just going by the steps ive read, i have android on it and it works just great, but i want a dif rom, not the stock rom i found.
when you choose usb flasher do you see:usb flasher......usb
i think americandroid is using daf method.so right click on aca.exe and run as administror.
be sure you downloded mgldr version of it (not clk)
never mind, my mistake
when i try running magldr it says error and it wont run magldr, and usb is connected, but it says it isnt...?
plz can anyone tell me what im doing wrong??? im running magldr and my hd2 is connected, but when i check the boxes in magldr and click next it looks for my pda, then says error 260 and make sure cradle/cable is plugged into pc, and it is, and it wont go into magldr so i can click usb flash drive...???
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
mutil said:
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
Click to expand...
Click to collapse
ok last night i did my first nand on my nd2, i ran the hspl, then i ran the magldr 1.13, then i scrolled down to usb flasher, then i ran the rom that the youtube link gave me, http://www.youtube.com/watch?v=cvS4EvS0PAw then it all worked, i had android on my phone, but i dont want the rom in the youtube link, i want one from this forum american android, and i was wondering, when i go to run magldr on my nand android i flashed, it tells me error and that to check if my phone is connected, and im just trying to do what i did in the youtube video but with a dif rom, but it wont work from android, it did just fine on wm 6.5, and my phone is connected to the usb, but it tells me it isnt, but i can still transfer music and other things, but when i go to run magldr it tells me my phone isnt connected, so i cant get into magldr and scroll down to flash usb and use the rom i want to use from this site, better? plz help thanks much.
in order to go into mgldr menu power off the phone.then power on but hold down the power key until mgldr menu comes. its not necessary to reload mgldr for each rom.if you installed it to your phone now it is in it.
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
getting phone working...
_fly
have you used the the HD2 toolkit? You can find/download from here
http://forum.xda-developers.com/showthread.php?t=1090783
try wiping the phone with task29, then loading the MAGLDR or cLK / which ever nand/rom you want to use. Hopefully this works for you....
_fly said:
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
Click to expand...
Click to collapse
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
mutil said:
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
when i go into ad recovery it says no boot source???
Then you have to install cwm first.
I have had a similar problem with my phone and what worked for me was disconnecting the usb cable and plugging it back in. then it seen it as usb and i was able to flash the ROM. i know it seems rather simple but this small fix might work for you as it did for me.
if you can install cwm i would highly suggest to do that and also looking into the hd2 toolkit as someone else as already pointed out.
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
spuati as administrator through ROMUpdateUtility
not by DAF
drobcristi said:
Hello, I have an hd2 Europe edition and I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
run "ROMUpdateUtility.exe" instead
Thx
palokm said:
spuati as administrator through ROMUpdateUtility
not by DAF
Click to expand...
Click to collapse
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
The ROM Update Utility doesen't work couse can not establish a connection to my phone
you must run as admin
procedure
hspl 2.08
task 29
radio rom 2.15
aMAGLDR v1.13
drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Try connecting your phone to the back of your PC in one of the USB ports. Do not use the front ones.
Then when you run the Update utility right click on it and RUN as Administrator.
Hope that works.
younut said:
Please respect the rules !!!
I hate this kind of Shi*
GO ON ANSWERS AND QUESTIONS ... IDIOT!
Click to expand...
Click to collapse
That's quite hypocritical, saying that you hate people breaking forum rules then swearing and calling another member an idiot. If you're going to flame him (as I indeed was about to as well, but in a much nicer way), at least help him too, and just warn him about the mistake and report the thread for maintenance.
@ OP, what exactly are you trying to do? From what I understand, you already have MAGLDR and you're trying to flash MAGLDR again? There isn't any point to that, from here onwards the steps are to flash CWM with the right partition, then your desired ROM. Follow this guide.
drobcristi said:
But, I wanted to put Android AndroPlus instead WM 6.5, and I get stuck on the boot menu aMAGLDR V1.13 and trying to get usb flasher I could not get to flash magldr v1.13 when I press DAF. exe, it says "Readme.txt for this release is missing" so i could not get to continue on installing magldr.(that's when I get to USB Flasher mode).
So I wish to install AndroPlus Android software on my HD2 device
Please help!
Click to expand...
Click to collapse
Copy Pasting the half of the first post doesn't help us finding out what the problem is, Respect the people who spend time helping you out without getting anything!
So, Here is what you did:
You HSPL'd your device,
Installed Magldr,
Booted the device and pressed "USB Flasher"
Connected device to the pc, and tried to install the software but got a readme error?
Well I have that sometimes, but I just can go further.. Very strange.
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Give a thanks if you found this helpful
adil1508 said:
Make sure to sync your fone with activesync for windows xp or windows mobile device in windows vista or 7. u cant flash MAGLDR without syncing your fone
Click to expand...
Click to collapse
not accurate.
The word 'sync' makes people think you have to actually get a connection to activesync/wmdc the program,,,,,, you don't.
put the phone into bootloader (stripey screen) connect usb, when serial becomes usb, thats an activesync connection and you can flash. activesync teh program will not show a connection when you do this. the line ''get an activesync connection'' has been confusing people for years.