Hello, guys, basically i want to flash my touch hd to duttys hd v2.8. which one do i install becuase there are two different downloads for the rom??
I have:
Operator Version: 34.119.1.611
Rom Version: 1.19.61.1 WWE
Touchflo 3d 1.3.35xxxx etc
Do I:
install/use uspl ver 2.5, and then just use these instructions
SAFEST WAY TO FLASH YOUR ROM IS THROUGH STORAGE CARD METHOD:
Copy BLACIMG.NBH into the root dir of your Storage Card.
Be sure to have at least 30% of charge.
Turn off your device by using the Power Button
Go to Boot loader mode. Push and hold Vol. Down + press Power button.
As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
And is that it. Will my orange phone stuff work as normal or do i have to do anything else?????
Dont want to do some wrong steps so im checking if its right
Thanks
You're probably better asking this question over in the ROM development forum, I think you'd get a quicker answer there. Also, you could post it in the Dutty's ROM thread itself. Sorry I've been no help!
As stated above your answer lies in Duttys thread.
Please try and follow the forum rules before posting new threads.
Everyone will be more than happy to help you (including me) in this thread
ok thanks i have posted in that forum now.
Hello, please can you help me! I only had my PDA repaired a couple of days ago, i needed to unlock it and i used your intructions for unlocking the XDA II but it did not work.
After following your instructions and opening the program xda2unlock and typing "yes" the program came up with the message:
"ERROR: OpenComport \\.\WCEUSBSH001 - the system cannot find the file specified"
The PDA is showing "serial v1.06" and "usb v1.06 when in cradle, it wont do anything like before i had to get it "reflashed" by the company.
What can i do??
Thank you!!
Nieko
connect it to usb and falsh a rom on it
the wifi and the readme of the rom file describe step by step how you do it
Struck on Serial
I do have the same problem. What would be the best ROM plz. All the ROMs I downloaded gives error as "102 Image File Checksum Error" or Language ID Error". Pls give me a good link for a working ROM.
helloo...i'm newbies at here.......i got problem when updating ROm to my HTC blackstone.....error [262] keep happen when i try to do it......help me..>.<
Please post your query in the Dummies Guide thread. No need for a new thread
Thread closed
p.s.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Hi there, I am from Thailand and I have problem with my A500. That i cannot access to the recovery mode and it shows picture of Android with this "!" symbol. The main problem is that i cannot update my firmware over the OTA when it completed download firmware and i installed it and then it appeared this "Update is invalid and has been canceled". So please help me to fix this problem, i really want to use 3.1!!!
Moved as not development, please read the rules and post in the correct section ONLY.
Hello all,
After trying much with AAHK and read many many posts I still unfortunalty cannot find the right answer.
I'll explain the situation.
I have a DHD from Vodafone NL (with is the UK ROM) version 3.13.161.3 and wanted to root (for ICS).
I'vew downloaded the newest AAHK and linked the phone. So far so good.
When running the AAHK it wanted to downgrade (abvious, no problem). The it downloaded the PD98IMG-GB4.zip.
Put it on my SD card and rebooted. Then I got the revocery image with the red triangle... So, choose option 2 to try something else.
Finally it booted in HBoot, it read the image and wanted to convert to that. But, mu volume + is broken, so i cannot confirm this
So, i've tried the other suggestion of downloading a stock RRU with the right version.
This want to upload the rom, but it stall is the 'sending'mode. If i look in the RUU log it 'hangs' on the command
'fastboot -s <deviceid> flash zip <pathtozip>,rom.zip. I waited for 1 hour, then killed it. On the screen of the phone you should see a progress
bar, but on my screne only the HTC logo, nothing else
I also tried replacing the rom.zip just before sending with the .zip downloaded by aahk.
Then even tried flashing myserf with HBoot in 'fastboot USB'mode, but if keeps giving 'flashing error' or something.
My radio is still S-on, so that might be a problem??
I even tried with the HTCDev method, got a RUU from there, but even that hangs on the fastboot command.
So it seems i'm stuck....
Anyone else has a export advice for a novice like me?
Thanks,
Rene
try putting the PD98IMG-GB4.zip file you have in the PD98IMG directory in aahk, when you run the aahk script it will check that directory when it prompts for a downgrade. if it finds the correct file, it will try to use that. if not, it will download.
azrael97c said:
try putting the PD98IMG-GB4.zip file you have in the PD98IMG directory in aahk, when you run the aahk script it will check that directory when it prompts for a downgrade. if it finds the correct file, it will try to use that. if not, it will download.
Click to expand...
Click to collapse
The PD98IMG-GB4.zip in that dir was downloaded by AAHK, so it can find it and it does.
It even put it om my SD card, after which i was stuck because the volume + button doesn't work...
But thanks anyway.
Put it on my SD card and rebooted. Then I got the revocery image with the red triangle... So, choose option 2 to try something else.
Finally it booted in HBoot, it read the image and wanted to convert to that. But, mu volume + is broken, so i cannot confirm this
Click to expand...
Click to collapse
What's option 2?
I guess you didn't finish this part of the aahk script properly since your volume button is broke:
echo.
echo Starting stock recovery the first time to init....
echo.
echo Steps:
echo 1. When you see the ugly red triangle, push/hold vol-UP and then push power to start stock recovery.
echo 2. When you get to the blue stock recovery menu, choose reboot and push power.
echo.
Click to expand...
Click to collapse
When I was messing with somebody else's DHD I did try manually flashing the PD98IMG.ZIP that aahk downloaded and i always get a bad image error or something. Only when I did as instructed by the aahk script was I able to root the DHD successfully.
I meant the menu option. But that is from your list: I got 1: The ugly red triangle.
However, i cannot try the vomule up and push power, since that button is broken
I just tried a reflash of HBoot with option S, menu entry 5, but even that will not work. Keeps hanging while flashing...
Ah,
In another trhead found the answer how to flash a RUU for command line.
Tried it, and this worked.... Now running the hack-ace command again, and it is working.
So now waiting for root.
rdhaan said:
Ah,
In another trhead found the answer how to flash a RUU for command line.
Tried it, and this worked.... Now running the hack-ace command again, and it is working.
So now waiting for root.
Click to expand...
Click to collapse
So, it is rooted.
Tried some ROMs, but all of them have 1 problem: 'No service'.
So, i tried the stock HTC rom, but even that says 'No service'.
Therefore, i cannot dial anymore
Even tried another SIM, but 'no networks available'.
The strange thing is: I get the 'MMS' APN pushed from the Vodafone NL network, so it seems to have some sort of connection...
What could be wrong?
Edit: seems the switching works, because the ROM (virtuous infinity 1.13.0-aplha2) warned about switching SIMs.
After reselecting my Vodafone NL i now got network and can dial again. So it seems it hat to 'settle'for a few more minutes...