[Q] error in updating ROM - Touch HD General

helloo...i'm newbies at here.......i got problem when updating ROm to my HTC blackstone.....error [262] keep happen when i try to do it......help me..>.<

Please post your query in the Dummies Guide thread. No need for a new thread
Thread closed
p.s.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.

Related

FLASH FAILED

Hello every 1
I am trying to upgrade my Radi STack (RSU)
I have an excutable file with the new RSU. When I ran, it takes me through few steps where at the end my XDA is rebooted and I get a button on my screen that says "Start" to start the upgrade process. When I press it, after few seconds I get a get an error message saying "Falsh Failed". When I press Ok (what else?!), The XDA is rebooted again and the process is repeated. If I do a format for the XDA, things go to normal.
DOes any 1 know what is going wrong here and how to fix this?
THX
Which ROM do you have? Which ROM are you trying to install? Etc.
I have 3.18.04 and R3.23.01 for the RSU and bootloader 5.22
I am trying to install the RSU 4.16
Also, when I have tried to install the XDA speciall ROM, it didn't work where after I see the screen "Upgrading" on my screen and the upgrading window on my computer asking me to wait for about 5 minutes, the activsync link is disconnected.
It is not clear to me what is the problem, is it the ROm, the bootloader or what?

After upgrading my device hangs-up at splash screen

Hi all,
This is my first post :x
I downloaded the ROM (4.00.10) from the kitchen. At first, I downloaded EXE file but when I start upgrading my Qtek reboot and nothing happen, I tried many times. I read about upgrading via SD. I did upgrading without any problem. BUT when it finish upgrading, my device won't start. It hangs-up at splash screen and showing ROM version and Radio Version only. I tried many many times with no success.
I need some help please
my device info:
ROM version: 3.18.04 ENG
ROM date: 05/22/03
Radio version: 4.21.00
Protocol version: 32s54
--
Model No.: PW10A1
Bootloader 5.22
--
Thank you in advance
Bailamos
Download again with NB0 then upgrade from your SD.
Download again with nb1 then upgrade from your SD.
Thank you, socheat.
But I did download nb1 and I tried upgrading with the sd method and the upgrading was successfully but my device won't startup it shows only the splash screen ( NOT FOR SALE ** Powered By Micro$oft ** ) and nothing happen after this screen
I restored my old rom (3.18.04 ENG) and the device is working now, but I want to upgrade to WM2003 :roll:
Is that cuz I upgrade the Radio ? my old radio version was 3.25 ( not sure ).
Thank you , All
Bailamos
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
UP :? Please
update
Please , I need help.
I tried to downgrade my device:
Bootloader 5.22 => 5.15
ROM 3.18.04 => 14.04
I thought it may help upgrading but that complicate the problem!!
NOW , I can't do any upgrade. When I insert the SD card and start booting, it show me the boot screen : PRESS ACTION to start downloading. as soon as I press ACTION it show : GSM OK and nothing happened!!!! It looks like I pressed the exit button ( I PRESSED the ACTION )
The EXE method still not working , the same as before as soon as it shows : 5 min screen , my device restart and it lose the connection with the ActiveSynic
ANY one CAN help ? P L E A S E
Pretty Please
Thank you
yes it will loose sync, but just leave it there!
some times it takes 10 minutes
but it will finish updating, trust me! that worked several times for me.
Thank you , ntabikha.
I'll give it a shot right now.
it didn't work
when my device re-start , the Program ( 1.09 ) show this message:
Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly
and terminate immediately after pressing " Ok "
I think there is something I don't know !! but there is someone may know !!
Is that happening cuz I upgraded my Radio Stack ?????????? ???? ???
It was something about 3.xx and it is now 4.21 !!!!!
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
sumaetee said:
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
Click to expand...
Click to collapse
Have you tried doing it without the Wallaby patch part? If not give that a try, no on the bootloader downgrade part!
HTH
Hello
I did downgrade my Radio stack. It was 4.21 now it is 3.23.01
But that didn't change anything. I'm still can't upgrade my device to 2003.
The problem is:
Method 1: (Program A / B)
my device re-start and the program showing this error msg:
" Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly "
Method 2: (SD)
It shows me the upgrading screen
Press ACTION to start downloading
BUT when I press action it go the bootloader main menu:
GSM OK
!!!!!!
That's it !!!
At the first time, my device was able to upgrade but it freez after finishing the upgrade. Now, it wan't even upgrading !!
ANY HELP !! PLEASE ??
** to the people who saying you can't downgrade your radio stack , that's not right .. YOU CAN .. I DID IT **
Bailamos

Old rom boots after flashing

Hi,
I tried some ROM from this website to change my wizard to wm6.
When the RUU finishes at 100procent my device restarts and normally it should be flashed. But mine always restarts the original rom. On the pc it says that the procedure has finished succesfully.
Dont know if this has anything to do with locking, but I used the lokiwiz to unlock my device.
Anyody an idea to solve this?
Grtz
Annihil8
your wizard is still CID locked...
try it again ... follow the instructions ... read carefully the messages when running lokiwiz ... could be misleading sometimes at a first glance ...
I'll give it another try. But the lokiwiz keeps telling me that the device is unlocked. It doesn't even give me an error like you get with the AKU2.
error:itwritedisk-an internal error occurred
So that is why I think that should be ok...
you may want to use the WST tool to check the CID status ... you find it on this forum. don't have the link on hand right now ...

Getting Update Error 262 Always (( Searched Everywhere But No Solution ))

PLZ help !!
I searched and I tried everything
disabling antivirus, and Windows Firewall , Restarting PC and PPC.
But still giving me the same error.
I update it to Diamond and it's now sticking on boot picture showing diamond with qoute under it " ITs Popa Black Diamond"
and when I press reset soft + Camera button + Power button then shows me Green and Red And Blue screen
I started the ROMUpdateUtility with Rom
after a while shows me this error
UPDATE ERROR 262
Plz Help
This thread should help (it's an Activesync issue).
I didn't know he made Vogue ROMs......
I had a similar problem. I have wanted to update mine ROM. I have downloaded new ROM and Unlocker and used How To Unlock Your Phone And Flash A Custom Rom And Relock Your Vogue (Written by Detroit_Doug). There it is written that the first needed to start RomUpdateUtility.exe, I have made as have been written and then as I did not try I all time had an error 262. When I already used all variants and have helped nothing. Then I have found in a folder with taken Unlocker file Vogue_unlocker.bat. After its start I followed instructions on the screen and all has passed smoothly. Phone has been successfully unblocked and flashed.

Error [300] : Invalid update tool

HEy guys,
i Was trying to upgrade my gene to windows 6.5,
its giving me ERROR [300] : INVALID UPDATE TOOL
now even if i try to load the original rom that is windows 6.1.....its giving me the same error
please advice or assist
successfully in getting rid of that Error 300
hello everyone
i seriously need help
i was successfull in getting rid of that error, but as soon as i give a click on finish , that is after the completion of update utility
my phone does not start
please assist or advice

Resources