Related
Hi all,
This is my first post :x
I downloaded the ROM (4.00.10) from the kitchen. At first, I downloaded EXE file but when I start upgrading my Qtek reboot and nothing happen, I tried many times. I read about upgrading via SD. I did upgrading without any problem. BUT when it finish upgrading, my device won't start. It hangs-up at splash screen and showing ROM version and Radio Version only. I tried many many times with no success.
I need some help please
my device info:
ROM version: 3.18.04 ENG
ROM date: 05/22/03
Radio version: 4.21.00
Protocol version: 32s54
--
Model No.: PW10A1
Bootloader 5.22
--
Thank you in advance
Bailamos
Download again with NB0 then upgrade from your SD.
Download again with nb1 then upgrade from your SD.
Thank you, socheat.
But I did download nb1 and I tried upgrading with the sd method and the upgrading was successfully but my device won't startup it shows only the splash screen ( NOT FOR SALE ** Powered By Micro$oft ** ) and nothing happen after this screen
I restored my old rom (3.18.04 ENG) and the device is working now, but I want to upgrade to WM2003 :roll:
Is that cuz I upgrade the Radio ? my old radio version was 3.25 ( not sure ).
Thank you , All
Bailamos
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
UP :? Please
update
Please , I need help.
I tried to downgrade my device:
Bootloader 5.22 => 5.15
ROM 3.18.04 => 14.04
I thought it may help upgrading but that complicate the problem!!
NOW , I can't do any upgrade. When I insert the SD card and start booting, it show me the boot screen : PRESS ACTION to start downloading. as soon as I press ACTION it show : GSM OK and nothing happened!!!! It looks like I pressed the exit button ( I PRESSED the ACTION )
The EXE method still not working , the same as before as soon as it shows : 5 min screen , my device restart and it lose the connection with the ActiveSynic
ANY one CAN help ? P L E A S E
Pretty Please
Thank you
yes it will loose sync, but just leave it there!
some times it takes 10 minutes
but it will finish updating, trust me! that worked several times for me.
Thank you , ntabikha.
I'll give it a shot right now.
it didn't work
when my device re-start , the Program ( 1.09 ) show this message:
Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly
and terminate immediately after pressing " Ok "
I think there is something I don't know !! but there is someone may know !!
Is that happening cuz I upgraded my Radio Stack ?????????? ???? ???
It was something about 3.xx and it is now 4.21 !!!!!
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
sumaetee said:
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
Click to expand...
Click to collapse
Have you tried doing it without the Wallaby patch part? If not give that a try, no on the bootloader downgrade part!
HTH
Hello
I did downgrade my Radio stack. It was 4.21 now it is 3.23.01
But that didn't change anything. I'm still can't upgrade my device to 2003.
The problem is:
Method 1: (Program A / B)
my device re-start and the program showing this error msg:
" Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly "
Method 2: (SD)
It shows me the upgrading screen
Press ACTION to start downloading
BUT when I press action it go the bootloader main menu:
GSM OK
!!!!!!
That's it !!!
At the first time, my device was able to upgrade but it freez after finishing the upgrade. Now, it wan't even upgrading !!
ANY HELP !! PLEASE ??
** to the people who saying you can't downgrade your radio stack , that's not right .. YOU CAN .. I DID IT **
Bailamos
Hi Profs,
there are some problems with a Artemis Update SPL (USPL) v.01. I've found this problem is several topic but there was no solution for it.
#1:
http://forum.xda-developers.com/showpost.php?p=1739577&postcount=413
#2:
http://forum.xda-developers.com/show...44#post1745844
#3
http://forum.xda-developers.com/showpost.php?p=1713596&postcount=1
The problem:
use USPL to get rid of the CID....count goes up to 100% screen shows black with green text, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use win XP.
i even tried without memory card and phone card....and nothing seems to work.......
ipl 1.14.0001
spl 1.14.0000
gsm 02.07.90
os 1.14.0.0
Who has any clue...?
With other words:
I've just got back my P3300 from repair, they changed the main board. With the previous main board I was able to upgrade the device and I was using the B&B versions.
But with this new board I'm not able to upgade the SPL. When I try to upgade the device after and start the start_uspl .exe the 10...20... ....100 my device become an interresting "blue screen" status and only the reset help to get out from this status. If I start the RomUpdateUtility.exe after the upgrade I got the error message #270
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
ExtROM version: 3.12.405.102
This is not the solution for the problem. I've tried it:
Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index...temis_Upgrades ....
Please help us to solve this problem....
Probably the same problem
This should be the same:
Hello POF,
I was directed to this link by Rudegar because I want to change the french ROM to English ROM.
The relevant data of my PDA is:
The version of the ROM: 1.14.406.1 FRE
Date of ROM: 9/27/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ROM extension version: 1.14.406.101
I tried exactly the way you described in the USPL_manual and everything went well till I got to a stage where I was asked to click the update button which I did. After then there was a window which showed "updating from current version to version 9.99". I was confused at this point but clicked "continue" and after this stage I got an error message and there was no longer a connection bw my PDA and my computer.
Thanks,
Jonat
Reply With Quote
http://forum.xda-developers.com/showpost.php?p=1784337&postcount=430
Also the same
Problem "lost connection PDA-PC"
Hi,
first I would like to thank you for goooood job to many people here !
Back to my problem. I have HTC Artemis (T-Mobile MDA Compact III), OS WM6 T-Mobile Czech version.
I ran start_uspl.exe on my computer. The part in DOS based screen seems to finish everytime OK, but finally the connection with PC is lost. Therefore when the PDA Phone ROM Update Utility starts cheking version the error "lost connection with PC" appears . PDA stay in "black screen" mode and only hard reset start it again as usual.
Does anybody have the same problem? Any idea, how to solve it ?
Thanks
http://forum.xda-developers.com/showpost.php?p=1773030&postcount=426
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
lenocs said:
then pops to white. I need to do a soft reset to get it running again.
Click to expand...
Click to collapse
What im saying is when it pops to white, dont soft reset it, just start the upgrade.
Anthony2oo5 said:
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Click to expand...
Click to collapse
that what i also do When the screen goes white, don't restart. Just start your RUU
lenocs said:
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
Click to expand...
Click to collapse
Same situation as above. Depending on the Artemis, the screen might go white or black. Just don't freak out and keep on flashing the USPL. It WILL work and then reboot. Then you can flash the actual ROM you want.
Hello from an absolut newbie trying his first upgrade,
And I have just experienced the same problem than lenocs.
I have run start_uspl.exe, but when the screen is suposed to become white or dark, it becomes dark and the artemis is in fact totally off and connection is lost.
Anyway I supossed that it was because the scrren got black and I tried to run the update utility, but I´ve got an error (the terminal is disconnected or similar) and nothing happens.
I have had to soft reset the terminal and fortunatelly it seems that I still have my previous ROM and it seems that it works. But, do you know if there could be some "side effect" because the first step of start_uspl script?
Anyway I would like to move to WM6, so, any suggestion would be really appreciated.
Thank's a lot
When you restart, what is the USPL number?
Ooopppssss!
I didn't pay attention.
As I've said, I'm a newbie, so I was just woried because I thought I had "bricked" my new atemis.
How can I know now the USPL number?
Anyway I tried the star_uspl again (I'm a crazy newbie) and it failed. The artemis went off almost inmediately.
Thank you very much for your help
SpiggyTopes said:
When you restart, what is the USPL number?
Click to expand...
Click to collapse
solved ... at least for me
I think the problem is in SPL version 3.13 (or maybe anyone newer than 1.11).
Try different Artemis USPL - for me worked version from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
It's very confusional, because file sizes and also dates are the same as in unfunctional version, but this one worked.
Hope it'll help you as it helped to me.
Maybe this can help you
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Rocheau said:
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Click to expand...
Click to collapse
do u have ur card in the phone while updating
you are suppose to remove the card
Problem solved (for me)
Hi,
i had the same problem error 270, 3% and lost connection with Activesync.
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
any way to upgrade was wrong ->> error 270
My good way was:
1. Downgrade to WM5 - original shipped ROM 1.12.405.1(link found on Wiki pages)
2. Under WM5 run USPL to unlock CID (now without any errors)
3. Final STEP - Upgrade to new ROM Artemis Touch 3.01 (without any errors by upgrade)
))
Now my Artemis seems to be OK.
I ran USPL with storage card inside the device...
no problem
switch SD card back to 2GB or smaller before USPL
Hi,
for me USPL did not work with my SDHC 8GB card but then I switched back to my previous 2GB SD card and then it works.
Perhaps the SDHC driver blocks USPL in some way.
Cheers,
Markus
i have been trying for 3 months
once i have upgraded my artemis to wm 6.0 everything seemed to be OK for two days... then the screen started to go black when i restart... şi downgraded to 5.0 but nothing changed... when i remove battery for a while, my arte works... when i try to do anything with it, the screen slowly goes black as if it is broken... please DO HELP ME! i am going to go mad... i have a new iphone, ihave i kaiser as well... but i miss my artemis very much...
Hello:
I have the same problem and realized hundereds have too. I have been checking in all forums and no asolution to it
The issue that happens to me is that I used USPL for upgrading to WM6 and worked, but now for the Touchflo it does not. Tried with all USB ports, tried with different computers and no good news.
The USPL msdos screen indicates that there is no connection at all in all percentage levels, then it bocomes dark and the 260 error whne installing the rom.
please help us soon !!!
we are in trouble!!
Same Problem : Screen shut down
Anybody can help us on this point ?
The only way to solve it is to remove the batterie during 30 min., then put it back and pray...
Then, for no reason, the screen shut down, a few minutes or days after
I've upgrade from WM5 to WM6 with the original Rom of HTC, it seems a little more stable but it shut down every 2 days when i'm lucky
Hello,
I have an unblocked SPV M560 (HTC3300).
Few weeks ago I have installed the B&B rom with WM6 on it. Now I would like to install the adinfinitum rom (http://www.adinfinitum.fr/wm6_gps_m6...d_and_the_ugly) to solve the GPS problem we can have with the M650 but I cannot flash anymore.
Here are some explanations:
After starting "start_uspl.exe" I get the Linux screen then the RUU application starts on my PC. RUU is trying to connect to the device but after few seconds it displays the error "ERROR[260]: Update error".
After this I tried to restart the pda, wait for Activesync connection and try to restart RUU.
This time RUU can connect, I can see the grey screen on the PDA and it starts updating... but after 2% I get a black screen on the PDA and RUU displays the error "ERROR[270] Update error".
I'm now reading this forum since 2 days and saw that other people already had this problem but I did not find any working solution.
Does anyone of you have an idea of what can I do to solve this problem?s
Thanks in advance for your help.
Alain.
REad this...
Remove sim and mem card from phone use clear storage to clean phone memory then again try start_uspl.exe wait to 100% finsh do not disconect phone and run then romupdateutility i hope that this can help mine problem is resolved and i flash spv m650 many times.
Hi, i have similary problem, when i try re-install WM on my xda orbit 3.15.118 i have alert : flashing error check your update utility..when i try install another WM6 i have alert : error 270:update error
battery full charged
anyone help me ;-)
Hi,
I finally managed to do the update. The only difference is that when RUU has started after getting the black screen I clicked on the cancel button.
After this I let the terminal with this black screen for few minutes (about 5 minutes) and starts again the RUU application.
And this time is works... don't ask my why, maybe it takes some time to the terminal to be ready to accept connections. At least now SPL 1.1 is installed and I can upgrade. My GPS is now working
Thanks
Alain
Spv m650 arte100
when i run the start_uspl.exe i have this window after the run
No Device Connected
Would You like to try copy again?
YES NO CANCEL
boy my SPV is in bootloader mode and i can't riun it in different mode
i have IPL 3.15.0001 and SPL 3.15.0000
What i have to do ???
PLEASE HELP ME
Help Help Help
Iam new to the flashing
I have herald (HTC P430 HERA) with wm5 ,i tried to upgrade to wm6 with TOUCH-IT.I installed the SPL and then ran the RUU ,everything was perfect the installation started normally ,durin the installation i chose the option to use the keylock ,when my htc started it kept on asking me the password on the device which i entered but it did not accepted .i kept on trying and eventually took out the battery.When i restarted the device it got stuck on a green scnreen with spl 1.08.0001 and when turned off i tried going in to the bootloader but everytime i run the same ruu it gives me erorr 300 i have tried several times now, donwloaded each and every ruu but all in vain and im in pain .sometime the screen get stuck on 0% . Can somebody help or atleast direct me to the right area.
at least it we could reach 1% rom update can be done
i think we can handle it via bootloader commands
you need to install enablerapi....
.......................
You have to download the official Tmobile RUU (google it), and reinstall it. After that before you try to flash your phone you have to take the Enablerapi cab and put it on your phone. After that do a hard reset. If you dont know what that is by now you shouldnt be flashing your phone. But anyway hold the buttons above the talk and end buttons and press the reset button at the same time. A black screen will come up and ask you to press the talk button (green button), press it and the phone will do a reset. Configure your screen and connect phone to active sync/WMDC and make sure you put the phone in airplane mode. Then run the uspl again and follow the directions on the screen.
Hi!
I have a HTC P3300.
I bought a 4Gb SDHC card, and it won't work. I read at the forum that I would need a different rom, so I downloaded "Artemis_Touch_4.02_Full_with_no_cube", which would have sdhc-support.
Then I executed "STEP 1 - activesync then uspl cid unlocking.bat", that finished ok, and then "STEP 2 - activesync then flash artemis touch rom.bat", which stopped with an error 302.
After a restart all that came up was the boot loader. I then tried to flash the original rom (HTC WM6 Dutch) from the computer, but that ended also in an error.
I tried the SD upgrade (rename .nbh file to ARTEIMG.nbh, put it on a formatted sd-card and load it in my phone), and it finished without errors, saying I should press any key.
After pressing a key, the bootloader popped up again.... :S
Can anyone help me? I have been searching the forum and trying to get my phone to work since 21:00 and I haven't got any progress at all!
well sorry for that
did you tried to make hard reset?
and once i had a completely dead artemis.. no sign of life..but it fixed by the following..(and maybe this may help you cuz the flasheng goes not like usual)
while your mobile is off.. press the record botton and the camera and it should starts with usual sd card flashing.
for me this what happens.
the setup was in three phases as i saw... and it took about 30 mins .
maybe it will works for you
I also tried a hard reset, wouldn't work.
I pressed and hold the camerabutton, but nothing happend...
Maybe the battery is empty, so I pressed and hold the camera button while plugging in the usb-cable.
It started the SD-upgrade, and is still busy.
The update ended with a "press any key to continue".
But when I pressed a key, the boot loader popped up :S
When I tried to flash another rom (NLD-FINAL), an error occurred (I believe it was error 270, not sure).
But then the normal startup screen appeared!
I don't know how, but the problem seems to be fixed!
sorry i mentioned the wronge button before..
try to start flashing by pressing the RECORED button and the power.. while your mobile is off.
and be sure that you copied the original shipped ROM to your device (NOT elese)
As you can see in my previous post, I managed to flash the original rom.
I'm gonna try to upload an other rom some other time...
And with a patch I got the SDHC working too!
Thnx for your help!
y_bother said:
sorry i mentioned the wronge button before..
try to start flashing by pressing the RECORED button and the power.. while your mobile is off.
and be sure that you copied the original shipped ROM to your device (NOT elese)
Click to expand...
Click to collapse
Hey, thanks a lot, I tought, my HTC-Cruise is ready for sending to repair, but with your info, it works again. I could install the WM 6.1 again, after System hangs up while booting every time. He found USB connection on a colored sreen. Thank you very much.
Jupeli