Hi !
It's my first thread, i hope you can find the solutions to solve my problem.
In first time, i'm sorry to my bad english. So, my problem is:
I have a HTC HD2 and i know to install Android on that. My new challenge is to overclock my device, with SetCPU or other. I have already followed some tutorials to do a few profiles... I did it, the maximum value i selected is 998 MHZ. It's Ok i think, i cross "Set on boot" and "enbale" so when i use Quadrant Standard Edition, i check 1024 Mhz. But when i see the device of XDA's devs i can see like rafpigna's nand 3024 MHZ ! Here : http://forum.xda-developers.com/showthread.php?t=908528
My questions are:
1. How can i do it ?
2. Can i accelerate my N64's roms (with N64oid) if i succeed to solve this problem ?
Thx for all.
MAMiiX said:
Hi !
It's my first thread, i hope you can find the solutions to solve my problem.
In first time, i'm sorry to my bad english. So, my problem is:
I have a HTC HD2 and i know to install Android on that. My new challenge is to overclock my device, with SetCPU or other. I have already followed some tutorials to do a few profiles... I did it, the maximum value i selected is 998 MHZ. It's Ok i think, i cross "Set on boot" and "enbale" so when i use Quadrant Standard Edition, i check 1024 Mhz. But when i see the device of XDA's devs i can see like rafpigna's nand 3024 MHZ ! Here : http://forum.xda-developers.com/showthread.php?t=908528
My questions are:
1. How can i do it ?
2. Can i accelerate my N64's roms (with N64oid) if i succeed to solve this problem ?
Thx for all.
Click to expand...
Click to collapse
Same question here... but, we really need to use setcpu????
I hope some people can answer us
MAMiiX said:
Hi !
It's my first thread, i hope you can find the solutions to solve my problem.
In first time, i'm sorry to my bad english. So, my problem is:
I have a HTC HD2 and i know to install Android on that. My new challenge is to overclock my device, with SetCPU or other. I have already followed some tutorials to do a few profiles... I did it, the maximum value i selected is 998 MHZ. It's Ok i think, i cross "Set on boot" and "enbale" so when i use Quadrant Standard Edition, i check 1024 Mhz. But when i see the device of XDA's devs i can see like rafpigna's nand 3024 MHZ ! Here : http://forum.xda-developers.com/showthread.php?t=908528
My questions are:
1. How can i do it ?
2. Can i accelerate my N64's roms (with N64oid) if i succeed to solve this problem ?
Thx for all.
Click to expand...
Click to collapse
This is totally dependent on the Kernel supporting overclock.
This question cannot be answered completely due to the fact there are several Android ROMs with different configurations and preset Set-CPU profiles.
Also it appears you've mistaken the Quadrant score to be the frequency of the CPU? The CPU was not 3024MHz, that is the Quadrant score. The CPU was 1.5Ghz.
I believe 998MHz is the standard highest processor speed of the HD2, unless you have a Kernel which supports overclocking you can do whatever you want in Set-CPU and it won't change a thing.
I'm afraid I cannot answer your question regarding the emulator but I believe it would not have a massive effect, maybe fix some lag if you have any.
Thanks you very much. So if i install the Rapigna's buil i can have this quadrant's score ? Really ? Because it's HIS Kernel which he can does this ?
Isnt it also the case the overclocking will only work when the phone is running with the charger plugged in?
I have not seen any overclocking working on battery (although i imagine it would kill the battery!).
geekyhawkes said:
Isnt it also the case the overclocking will only work when the phone is running with the charger plugged in?
I have not seen any overclocking working on battery (although i imagine it would kill the battery!).
Click to expand...
Click to collapse
No.
There are a multitude of threads from users moaning about overclocking depleting the battery far quicker than the standard clock settings. That on its own is enough to conclude the phone doesn't have to be plugged in to allow the overclock to work.
MAMiiX said:
Thanks you very much. So if i install the Rapigna's buil i can have this quadrant's score ? Really ? Because it's HIS Kernel which he can does this ?
Click to expand...
Click to collapse
You may receive comparable results although Quadrant scores have been criticised because of what they are based upon. You may receive lower scores. Running your phone in an overclocked state is an effective way of shortening the life of your phone, if you want to play games so much I would suggest maybe a PSP or Nintendo DS?
Overclocking depends on the kernel that is used. Kernel like tytung's kernels supports max speeds of up to 1190mhz. Rapigna's kernel supports up to 1.5ghz.
Based on this, if you use these kernels, use it alongside setcpu to control your overclocking.
However, I strongly advise against overclocking + charging at the same time unless if you are in an air conditioned room. There has been some speculation that overheating might be related to the recent outburst of touchscreens failing "mysteriously". Another technique to avoid this is to use a battery temp profile in SET CPU to give you a warning when your battery has reached dangerous levels.
Thanks for all !
1190mhz is the best and safest over clock speed
Related
Good morning.
I am new to the world of the HTC and I have a question.
When that version will be available for NAND?
What is the best version of Android?
I am impatient. Thank you
Sorry for my language, I'm french.
fred89 said:
Good morning.
I am new to the world of the HTC and I have a question.
When that version will be available for NAND?
What is the best version of Android?
I am impatient. Thank you
Sorry for my language, I'm french.
Click to expand...
Click to collapse
Maybe will be available in September, maybe not.
Use search function will be more helpful.
remember use the michyprima's zimage, it pushs my quadrant score to 1817
fred89 said:
Good morning.
I am new to the world of the HTC and I have a question.
When that version will be available for NAND?
What is the best version of Android?
I am impatient. Thank you
Sorry for my language, I'm french.
Click to expand...
Click to collapse
Good things come to those, who wait. ;-)
B.R.
d3m0n
JJbdoggg said:
how exactly do you know that? any proof?
Click to expand...
Click to collapse
my mistacke...by overclocking each HW component works much more stable and cooler. I hear temperature is 10 c lower when you overclock hd2
i see your point but there are hundreds of people are using the oc'ed kernel in shubcrafts build yet ive seen VERY few complaints
p.s.
Everyone! i have suceeded in making teh androids run on teh nands the link is -***MOD EDIT- Link removed: Extremely obscene material.Immediate ban placed on this user account***
Problems ? i have E8400 Oc to 4.0 ghz for every day. its 100 % stable with custom cooling .
Thats does not change the fact he is runing much more hotter and more IMPORTANT his life span is reduced very much.
hd2 cpu OC'ed that much with no cooling at all can cause great deal of hw problems in long therm. be sure in that.
11cal cal i know oure problem,it ia because we are waiting for a new shui8 android build......we need some sleep lol...btw,i do not want a nand version,i want a nas version with network share so i can run android remotely haha..
Sent from my HTC HD2 using XDA App
ognjeniHD said:
and melts down your hd2 cpu ...dough
Click to expand...
Click to collapse
let me also say that overclock is optional. there are optimizations (code is optimized for armv7-a architecture, and other optimizations), but overclock is not enabled by default. w/ my kernel mhz range is 245-998.
Also CPU is downvolted so that means minor battery usage and higher cpu life due to minor voltage.
So why are you saying something that's not true?
@JJbdoggg
@michyprima you are talking about builds ( which only have OC option enabled ) and im talking about alrady Oc'ed devices with such builds
most builds do not have it enabled by default. atleast none that Ive tested. The kernal gives the ability to do it but it isnt set till setcpu is used.
My co-worker has been running his droid fulltime overclocked and has had no problems. I highly doubt any overclocking of phones is that extreme.
If the life span of your desktop cpu is reduced then you are either one applying to much voltage or two using not enough cooling.
Heres more info just to clarify.
http://www.overclockers.com/overclockings-impact-on-cpu-life/
i see i will have to explain some facts about overcloking so everybody understand, so we stop talking nonsense.
Each CPU have its own lifetime , some of earlyer Intel sockets had its lifetime of about 100 000 work hours.
Each time you give CPU more voltage, more than he is supposed to have, he is producing more temperature which offcourse lower his lifetime by certain amount of work hours compared to planed lifetime.
You all talk some nonsense, how some of your friends uses OC HW or phones few weeks or months. if you had time to read my post precisely, you could noticed i said in long therm.
Back again to OC..using custom cooling will only make cpu stable, will not restart or overhear due to over -voltage.
and there is many more factors that is making slighty different situation in hd2 cpu compared to pc...
Negative side is that there is no cooling..only positive side is that hd2 cpu is most of time working on 200-400 mhz depending on the thing you are doing on your phone at the time.
but be sure when you use his full potential, like in multimedia (gaming, playing video ...) in that OC condition, in long therm you are risking to cause HW problems on your phone because of over voltage -missing any kind of cooling that OC 'ed cpu.
my last msg about this.
Cheers
I guess he didnt read my exact post detailing the negative effects and how to determine them... I guess its nonsense even though its factual.
Hey everyone!
I was wondering...
So far, the HD2 in Android is able to run at a maximum of 1190Mhz. Is there a way to remove this limit and allow Android to increase the CPU clock frequency?
It'd be awesome to see what the Quadrant score would be if speeds of 1.3Ghz were used And Android would be blazing fast
Bump....isn't anyone as interested as I am?
No, in order to reach a higher clock speed the Kernal would have to be modified. But even then many other variables will also need to be considered. Vcore will need to be adjusted, and since at 1.2GHz it's already been increased they would have to increase it further in order not to hit a ceiling causing the CPU to become unstable under load.
Modifying code will also mean that other parts of the Kernal or OS might not play well together. Bugs can be created and would need to be fixed.
Sometimes even doing this will reduce performance rather than increasing. There is a reason why they havn't gone above that speed for now or ever.
Have a great day sir.
frankly saying just don't see the point of doing that. personally i wouldn't want my HD2 to smell like burnt chicken
Elemental_Fire said:
Bump....isn't anyone as interested as I am?
Click to expand...
Click to collapse
Benchmark scores are ultimately pointless, unless all you want to do with your phone is have willy-waving competitions with other HD2 owners.
"My build get's 3 more points in Linpack than you" big fat hairy deal.
It makes no difference, the only thing that matters is whether your build is fast enough, stable enough, and that you are happy with it. Why melt your phone just to say you've got the highest score in a completely arbitrary set of tests?
Reno_79 said:
Benchmark scores are ultimately pointless, unless all you want to do with your phone is have willy-waving competitions with other HD2 owners.
"My build get's 3 more points in Linpack than you" big fat hairy deal.
It makes no difference, the only thing that matters is whether your build is fast enough, stable enough, and that you are happy with it. Why melt your phone just to say you've got the highest score in a completely arbitrary set of tests?
Click to expand...
Click to collapse
LOL XD that was pretty funny.
Reno_79 said:
Benchmark scores are ultimately pointless, unless all you want to do with your phone is have willy-waving competitions with other HD2 owners.
"My build get's 3 more points in Linpack than you" big fat hairy deal.
It makes no difference, the only thing that matters is whether your build is fast enough, stable enough, and that you are happy with it. Why melt your phone just to say you've got the highest score in a completely arbitrary set of tests?
Click to expand...
Click to collapse
*Linpack score of 7*
Time to pop the blue chip
Elemental_Fire said:
Hey everyone!
I was wondering...
So far, the HD2 in Android is able to run at a maximum of 1190Mhz. Is there a way to remove this limit and allow Android to increase the CPU clock frequency?
It'd be awesome to see what the Quadrant score would be if speeds of 1.3Ghz were used And Android would be blazing fast
Click to expand...
Click to collapse
Search my kernel thread. I posted benchmarks at 1.3Ghz. There is really little point to it. I am back running at 1Ghz again.
Sent from my HTC HD2
my leo only goes until 998mhz.. does anyone know why?
hastarin said:
Search my kernel thread. I posted benchmarks at 1.3Ghz. There is really little point to it. I am back running at 1Ghz again.
Sent from my HTC HD2
Click to expand...
Click to collapse
I can validate this. I have been using many different kernels and for my money Hastarin's r8 (maximum cpu speed 998mhz) runs the smoothest and most stable, while giving me 6ma in standby (with 3G on).
Overclocked at 1.9ghz I saw some minor speed improvements but not really all that much and the battery drain was horrendous. Clock speed is overrated, there isn't really anything available on Android that requires more than 1ghz anyways. I have been playing IQ and Final Fantasy 8 with my wii remote on my current CM6 ROM with Hastarin's kernel and everything is smooth as butter.
Benchmark scores are useful to compare kernels and cpu governors, and I really only use Quadrant to look for big changes (+/- 200 points or more). I just updated from an Elbartome kernel to Hastarin r8 and saw an immediate 200 point Quadrant boost using an interactive governor at 1ghz and bettery battery drain.
The real differences are in the kernel, not the clock speed and as kernels get more and more efficient, you will see higher benchmarks from the same clock speed.
Remember that first Cotulla ROM we got on our HD2s in the very beginning? That was 1ghz and it ran like crap (actually amazing for a first ever port) compared to what we have now.
gianmich said:
my leo only goes until 998mhz.. does anyone know why?
Click to expand...
Click to collapse
Again, it's the kernel you are using.
Has nothing to do with the phone, WinMo ROM, or Radio or anything.
All the ROMs in the dev section tell you which kernel they use. If they use Hastarin kernel you will not be able to OC it, I think everyone else uses an OC to 1190mhz kernel, so using their ROM or their kernel will give you the higher clock speed.
Why you guyz give this type of answer he didn t ask if you were agree to overclok just if it would be possible to overclock more that 1190 stop stupid answers we dont give a sh** if you think overclocking is useless just dont reply....
To answer: i ve see dev hd2 running 1323mhz but wasn t stable enough. Impossible to released the kernel as the increase of Vcore was causing excessive hotness and autoshutdown
Sent from my HTC HD2 using XDA App
asphaltkiller said:
Why you guyz give this type of answer he didn t ask if you were agree to overclok just if it would be possible to overclock more that 1190 stop stupid answers we dont give a sh** if you think overclocking is useless just dont reply....
To answer: i ve see dev hd2 running 1323mhz but wasn t stable enough. Impossible to released the kernel as the increase of Vcore was causing excessive hotness and autoshutdown
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Pull your head in.
The OP asked a question and I answered it. I have run at 1.3 just fine but have chosen not to do so. Not everyone could of course. I have been lucky with my phone.
If you don't like my answer you're free to ignore it but there is no need for posts like yours.
Sent from my HTC HD2
seems to me the ultimate kernel would be the r8 with undervolt under 1000 , and overvolt above 1000 to maintain sability .. i dun care about battery , i carry 2 with me
who on earth are you to tell others how to reply. the last time i checked your name was not in the list of moderators.
asphaltkiller said:
Why you guyz give this type of answer he didn t ask if you were agree to overclok just if it would be possible to overclock more that 1190 stop stupid answers we dont give a sh** if you think overclocking is useless just dont reply....
To answer: i ve see dev hd2 running 1323mhz but wasn t stable enough. Impossible to released the kernel as the increase of Vcore was causing excessive hotness and autoshutdown
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
asphaltkiller said:
Why you guyz give this type of answer he didn t ask if you were agree to overclok just if it would be possible to overclock more that 1190 stop stupid answers we dont give a sh** if you think overclocking is useless just dont reply....
To answer: i ve see dev hd2 running 1323mhz but wasn t stable enough. Impossible to released the kernel as the increase of Vcore was causing excessive hotness and autoshutdown
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Did you happen to notice that out of every reply to this thread, yours was the least coherent and offered the least amount of useful information?
The one nugget of information you tried to give wasn't even accurate. It IS possible to release a 1.3ghz kernel, but one has not been publicly released because, as hastarin pointed out, it doesn't really improve performance.
hastarin is a kernel developer, he knows more about this stuff than any of us and I am sure the OP could use the information provided by him and all of us who actually use different kernels and either OC or don't.
Thanks everyone. While it is true that all I wanted to know was if it was possible, a little exra knowledge can't hurt anyone Hastarin, I use your kernel, and admit it's amazing! Guess I don't really need 1.3Ghz as long as the device runs smooth, right? Quadrant speeds aren't totally relevant but I like to show off sometimes, like we all do
so hastarin's kernel allow speed up to 998 mhz?
With respect, this guys post isn't the most coherant but he is French so let's not be too judgemental.
He's also got a point. He's not meaning everyone, especially not hastarin, but posts #4, 5, 6 and 7 are pointless, uninformative and even wrong.
I'm not a big one for philosophy but Plato said "Wise men talk because they have something to say; fools, because they have to say something". People should just stick to posting in threads that they can usefully contribute to.
I hope this post contributes in the way of reminding people that the post counter is not a measure of intelligence, experience or forum standing.
asphaltkiller said:
Why you guyz give this type of answer he didn t ask if you were agree to overclok just if it would be possible to overclock more that 1190 stop stupid answers we dont give a sh** if you think overclocking is useless just dont reply....
To answer: i ve see dev hd2 running 1323mhz but wasn t stable enough. Impossible to released the kernel as the increase of Vcore was causing excessive hotness and autoshutdown
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Lol yeah, he was helping out...which he did Anyways enough of the flaming lol!
Hastarin, could you inbox me? Need to talk
Elemental_Fire said:
Lol yeah, he was helping out...which he did Anyways enough of the flaming lol!
Hastarin, could you inbox me? Need to talk
Click to expand...
Click to collapse
Feel free to send me a PM but I am about to head out for most of the day so don't expect a prompt reply.
Sent from my HTC HD2
hi guyz, i have a little question for you
does someone have an hd2 with android witch is overclocked to over 1ghz? 1.5ghz too? and, is it a warried operation or cpu has a low overhead in that situation?
3rd and last question, if i put my hd2 in 1.5ghz mode, and force a bench test, may i broke my hd2 with going upper than cpu Tjunction or there's a system protection witch shuts down all the hardware else the cpu is too close to Tjunction? (like normally pc cpu)
i don't know if snapdragon has system protection, so, i don't want to try to fuse my hd2 (it's my main phone)
and, for users who whant to know, yep, i'm using wp7 because it's smoother than android, but, if i try to use android with that overlock, may it can be smooth like wp7, maybe
and, please, don't say that android is smooth, because it has some micro freeze in the continuity of the animation, and i hate that
thank you for your answers
iba21 said:
hi guyz, i have a little question for you
does someone have an hd2 with android witch is overclocked to over 1ghz? 1.5ghz too? and, is it a warried operation or cpu has a low overhead in that situation?
3rd and last question, if i put my hd2 in 1.5ghz mode, and force a bench test, may i broke my hd2 with going upper than cpu Tjunction or there's a system protection witch shuts down all the hardware else the cpu is too close to Tjunction? (like normally pc cpu)
i don't know if snapdragon has system protection, so, i don't want to try to fuse my hd2 (it's my main phone)
and, for users who whant to know, yep, i'm using wp7 because it's smoother than android, but, if i try to use android with that overlock, may it can be smooth like wp7, maybe
and, please, don't say that android is smooth, because it has some micro freeze in the continuity of the animation, and i hate that
thank you for your answers
Click to expand...
Click to collapse
I have used setcpu, overlocked to max, didnt brick my hd2
yz.hd said:
I have used setcpu, overlocked to max, didnt brick my hd2
Click to expand...
Click to collapse
are you using it now? in 1.5ghz mode?
yz.hd said:
I have used setcpu, overlocked to max, didnt brick my hd2
Click to expand...
Click to collapse
thank you so much
You can set your clock to max, but make a profile to downclock your cpu speed to ~500 MHZ when it heats up.
Dr.Move said:
You can set your clock to max, but make a profile to downclock your cpu speed to ~500 MHZ when it heats up.
Click to expand...
Click to collapse
oh, you could make a profile with downlcloking when cpu goes to a specific temperature?
nice, what's the tjunction of snapdragon? is 50°C too hight?
not sure, to be honest, I don't overclock my device. too scared to do so :/
but when I did overclock it I set the temperature to 41-42 Celsius.
you can tell that I got a lot of high temp warnings, safe is better than sorry.
iba21 said:
are you using it now? in 1.5ghz mode?
Click to expand...
Click to collapse
no, not using it, uninstalled it, because it makes my phone randomly reboot + it can brick your phone (little chance for that) but me no like overheating
How to get to 1.5?
SetCPU only let's me go till 1.2 ghz..
Delano.888 said:
SetCPU only let's me go till 1.2 ghz..
Click to expand...
Click to collapse
You need a kernel that allows overclocking
Delano.888 said:
SetCPU only let's me go till 1.2 ghz..
Click to expand...
Click to collapse
different builds use different kernels, and each support different max CPU speeds. If the kernel supports overclocking, the developer usually mentions than in the first post. Note that Some kernels/builds do not support any kind of overclocking, so the max CPU speed would be ~988 MHz
Hi, how can i overclock my tf300t (Clean rom 2.5 oveclock 1.6ghz) to 2.0 Ghz? i read something in the forum but there isn't any kind of guide, i want know if the tablet is stable with this frequency, and if i risk something.
thanks
anthraxx90 said:
Hi, how can i overclock my tf300t (Clean rom 2.5 oveclock 1.6ghz) to 2.0 Ghz? i read something in the forum but there isn't any kind of guide, i want know if the tablet is stable with this frequency, and if i risk something.
thanks
Click to expand...
Click to collapse
Why would you need to overclock so high? Do you want it to explode! xD
Seriously though, would probably advise against it. It's like a whole 700/800 MHz higher than it's meant to run at stock. I'd say it would be very unstable, and probably wouldn't get very far battery-life-wise. 1.6GHz really not enough :/
mozyman said:
Why would you need to overclock so high? Do you want it to explode! xD
Seriously though, would probably advise against it. It's like a whole 700/800 MHz higher than it's meant to run at stock. I'd say it would be very unstable, and probably wouldn't get very far battery-life-wise. 1.6GHz really not enough :/
Click to expand...
Click to collapse
1.6ghz is ok? or i'll risk something?
I did that speed already. But it is very very unstable. random reboots within 10 minutes of use. also the battery life is very low. and the whole tablet is to hot.
i only was using it to see how fast it could go. that was the max. i am at Cutom Rom - 07/10/2012 - [email protected] Edition V02 - The Ultra Fast Rom - based on last Asus Firmware 10.4.2.13 at this moment.
this is very stable. balanced speed is 1.3 and thats oke. Normal performance speed is 1.6 but i only use that when playing games. You dont need those high speeds for daily use.
If you have the financial means to buy a new tablet - you can try all the time to work on this frequency.
With 1,6ghz i'll risk to break the tablet?
i used 2.0ghz about a week daily use. But now im lowered it to 1.8ghz and it is stable my everyday use. and battery lenght is very good maybe better than stock (i made undervoltage, so cpu uses -50mv less power in any speed than normaly/stock )1.8ghz use 1150mv and lowest speed use 775 mv)
Niksunen said:
i used 2.0ghz about a week daily use. But now im lowered it to 1.8ghz and it is stable my everyday use. and battery lenght is very good maybe better than stock (i made undervoltage, so cpu uses -50mv less power in any speed than normaly/stock )1.8ghz use 1150mv and lowest speed use 775 mv)
Click to expand...
Click to collapse
on tf300t? what kernel?
anthraxx90 said:
on tf300t? what kernel?
Click to expand...
Click to collapse
yep on tf300, and i compiled kernel myself, adding these features on it. So it is no downloadable this moment.
ok, and it's normal random reboot on 1,6 ghz? the problem is voltage or kernel?
anthraxx90 said:
ok, and it's normal random reboot on 1,6 ghz? the problem is voltage or kernel?
Click to expand...
Click to collapse
well, if you raise voltage up it may help, but i thing the problem is, that every tablet cpu is "diffrent" than other. This i mean, that these cpu is specsed in other speed than 1.6, 1,8 or 2.0ghz, and some invidiuals might work good in these higher speeds, some get randon reboots / freeze, or some of cpu:s dont even boot higher speeds. (i found out that when few people test my kernel, and it not even booted. And someone it will work fine.) This thing can "cross" by made kernel force cpu speed 1.0ghz at bootup (and i made this my kernel)
Also these tf300 tablet is manufactured atleast couple of diffrent cpu type /cpu id, so kernel have to had support all of these overclocking
It just like computers, some cpu can overclock higher than others, and if you go too high you need extra cooling, and in tablets, it is not possible, like normal pc's
*Most of this is my conclusion only, it may not be 100% accurate truth, but this how i see this thing. And if someone knows better etc, you can correct me *
Niksunen said:
well, if you raise voltage up it may help, but i thing the problem is, that every tablet cpu is "diffrent" than other. This i mean, that these cpu is specsed in other speed than 1.6, 1,8 or 2.0ghz, and some invidiuals might work good in these higher speeds, some get randon reboots / freeze, or some of cpu:s dont even boot higher speeds. (i found out that when few people test my kernel, and it not even booted. And someone it will work fine.) This thing can "cross" by made kernel force cpu speed 1.0ghz at bootup (and i made this my kernel)
Also these tf300 tablet is manufactured atleast couple of diffrent cpu type /cpu id, so kernel have to had support all of these overclocking
It just like computers, some cpu can overclock higher than others, and if you go too high you need extra cooling, and in tablets, it is not possible, like normal pc's
*Most of this is my conclusion only, it may not be 100% accurate truth, but this how i see this thing. And if someone knows better etc, you can correct me *
Click to expand...
Click to collapse
ok when do you release ur kernel's download? i wanna try
anthraxx90 said:
ok when do you release ur kernel's download? i wanna try
Click to expand...
Click to collapse
Well im not home right now, so i dont have any 2.0ghz or 1,8ghz kernel with me, i have only 1.7ghz oc kernel, so you can test it if you want. But just like always, im not taking any responsibility, so test /use it with own risk. https://www.dropbox.com/s/vvmti4knwkeflde/Nixu_Kernel_OC_1700_v0.1_alpha.zip
i'm afraid now loool, what would happen exactly?
after flashing the kernel is locked to the screen asus, does not want to start
That won't happen I flashed it
Sent from my SGH-T989 using xda app-developers app
I updated the kernel to run 1520mhz on P5110 wifi.
Its running smooth at that with 1.400v
Can more be unlocked ?
Im willing to try find max.
Off topic.... Do you change only kernel, or you flashed compleet aopk rom?
Sent from my GT-P5100 using Tapatalk 2
matasar said:
I updated the kernel to run 1520mhz on P5110 wifi.
Its running smooth at that with 1.400v
Can more be unlocked ?
Im willing to try find max.
Click to expand...
Click to collapse
That's already beyond the Max. You can't oc it anymore than what you have. I'm surprised it doesn't lock up and freeze at anything higher than 1.42.
scottx . said:
That's already beyond the Max. You can't oc it anymore than what you have. I'm surprised it doesn't lock up and freeze at anything higher than 1.42.
Click to expand...
Click to collapse
So that is absolute max ?
There is no way in heaven to unlock more, its impossible and no use to ask any more questions at all about it ?
Totally absolute no chance that anyone can do it then...
I was a good overclocker before, soldering voltmods with magnifying glass on gfx and mb and doing GDDR timings optimizations step by step with bios flash for every change.
There was always more even when everyone said you cant do any more.
But as you say i have reached max (even beyond max)
Thank you.
(And no im not trying to be a smartass, i just heard "NO" way to many times to listen...the difference btw 1.0ghz to 1.5ghz is ENORMOUS so i just wanted more)
matasar said:
So that is absolute max ?
There is no way in heaven to unlock more, its impossible and no use to ask any more questions at all about it ?
Click to expand...
Click to collapse
I'm actually surprised the OMAP hasn't shut itself down with all the clock and voltage protection stuff it has.
Here's the slick sheet for the OMAP 44xx that we run in the tablet: http://www.ti.com/lit/ml/swpt034b/swpt034b.pdf
I couldn't find the actual technical manual for it, but I didn't search hard enough.
Buy a faster tablet.
So its made for 1ghz and above, according to pdf.
So we will see tablets with same hardware running 1.5 and depending on cooling and so on.
it aslo seems to handle alot more then its offering, like 20mp cam and so.
And scott if i wanted the fastest then i would pay alot more, so i rather overclock.
you overclock also so i dont understand your comments at all.
I overclock but..
I'm not asking for more like you.
so i cant ask anything here ?
then this forum sure is not for me!
i will find a more helpful place then, see you.
4430
do we have a 4430 dual core in the tab 2 7" or a 4460 it would be nice if it is the 4460
the OMAP4430 operates at up to 1 GHz, while
the OMAP4460 operates at up to 1+ GHz