Database Users

hd2 stuck magldr 1.13 help!

Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks

If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously

I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?

i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).

i have a problem like that

If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....

But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?

any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed

Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes

osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks

That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App

This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard

Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated

Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.

hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation

DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).

i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do

tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??

Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)

[Q] Help please with bootloader & SPL

Ok I'm trying to install NAND Android on my HD2 & have found a thread that I can follow but to get started I need to have SPL 1.42.0000, 1.62.0000, 1.66.0000, 2.07.0000, 2.08.0000 or 2.10.0000 installed & I had 3.03 having just debranded the phone using HSPL.
Now I know I have to use bootloader to downgrade which I have managed to do but now have "Not Allowed" come up on the screen, the phone just goes into tri colour & now shows SPL 1.42.0000.
I think I know the reason - this was a stock rom I downloaded from the HTC site & my phone is a TMobile UK so presumably I would need an SPL as above for the TMobile network to strat with? If so where can I get one from as HTC don't appear to have one on their site with the SPL numbers as above?
Many thanks
Junks

spls are not specific to any network.
run hspl4 choose 2.08.hspl, done.

samsamuel said:
spls are not specific to any network.
run hspl4 choose 2.08.hspl, done.
Click to expand...
Click to collapse
Thanks Sam - Didn't realise that, I still have to get the phone to start though as I can't now get a connection to the PC as its stuck in tri colour mode with no USB

Plug in the cable, when "serial" becomes "USB" at bottom of bootloader screen, you're good to go. Forget you ever heard of an "activesync connection",,, it doesn't mean the activesync program, it means " USB connection"( using the activesync drivers)

Thanks again Sam, sorted that now & got HSPL4 loaded.
Need to put up another post now as stuck on the MAGLDR screen & cant get the NAND DAF to load!! I shouldn't have started this!

Junks666 said:
Thanks again Sam, sorted that now & got HSPL4 loaded.
Need to put up another post now as stuck on the MAGLDR screen & cant get the NAND DAF to load!! I shouldn't have started this!
Click to expand...
Click to collapse
Use Clock Work Mode Recovery to flash your NAND Android ROM. Check my sig for a link to CWM. With CWM all you have to do is copy the .zip.file to your SD card and then use CWM to flash it. It is very easy this way. The thread on CWM will tell you how to flash it and all info need to know about it.

Thanks for that but I've only just managed to do the simpler method wrong & don't understand the CWM at all at the moment. Was just trying to get the easiest route for my first flash but after trying three NAND ROM's I get the same error after loading MAGLDR & running the DAF.exe
As MAGLDR is loading...........SS SD kernel open failed
Then after running the DAF.exe files
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)

Did you get it going Junks?
Don't panic, we can fix this

T-Macgnolia said:
With CWM all you have to do is copy the .zip.file to your SD card and then use CWM to flash it. It is very easy this way. The thread on CWM will tell you how to flash it and all info need to know about it.
Click to expand...
Click to collapse
Junks666 said:
Was just trying to get the easiest route for my first flash
Click to expand...
Click to collapse
Go read the thread on CWM!!! As I said you just copy the .zip file of the ROM to your SFD card wich is how you download the ROM meaning you have to only download it nothing else. To copy it to your SD card use USB MassStg option #4 of MAGLDR but you have to have your phone connected to your computer via USB cable. To flash CWM connect your HD2 via USB and select the USB Flasher option #5 of MAGLDR then run the DAF of CWM. This will flash CWM to yor HD2. when your phone reboots keep the power button pressed down to get MAGLDR back up then select AD Recovery option #8 of MAGLDR. This will bring up CWM, then select "install zip from sdcard" then select "choos zip from sdcard" then find the .zip file that you just copied to your SD card and select it and it will flash the ROM. Oh yeah you have to use the send button to select each thing. Now what else do you not understand?
Look at my signature for links to MAGLDR and CWM.

Not yet Mez
Well I thought that seemed easy to understand TMac but.................
I intalled the cleandroid zip file but I guess since it didn't work you meant extract to the SD card (CWM didnt find the cleandroid zip file)? Also is there anyway of booting normally at the moment as I think I should charge the battery again after all this trying without success before I try again?
Thanks for your patience, I'm really not used to this sort of thing at all & at 54 yrs old I think I'm doing quite well!! lol

Junks666 said:
Not yet Mez
Well I thought that seemed easy to understand TMac but.................
I intalled the cleandroid zip file but I guess since it didn't work you meant extract to the SD card (CWM didnt find the cleandroid zip file)? Also is there anyway of booting normally at the moment as I think I should charge the battery again after all this trying without success before I try again?
Thanks for your patience, I'm really not used to this sort of thing at all & at 54 yrs old I think I'm doing quite well!! lol
Click to expand...
Click to collapse
Clean droid is also my fav rom
Assuming that you are able to boot into MAGLDR screen and you have the Cleandroid rom in your PC.
Now, in MAGLDR screen, select menu no.5 (USB Flasher) and subsequently connect your phone ( Plug UsB to PC). On your PC, run the DAF.exe of Cleandroid rom.
If you succeed, it will reboot to android.
Before doing that, please make sure battery above 50 %, spl 2.08 HSPL and radio 2.15.xx were installed.
Good luck

silverwind said:
Clean droid is also my fav rom
Assuming that you are able to boot into MAGLDR screen and you have the Cleandroid rom in your PC.
Now, in MAGLDR screen, select menu no.5 (USB Flasher) and subsequently connect your phone ( Plug UsB to PC). On your PC, run the DAF.exe of Cleandroid rom.
If you succeed, it will reboot to android.
Before doing that, please make sure battery above 50 %, spl 2.08 HSPL and radio 2.15.xx were installed.
Good luck
Click to expand...
Click to collapse
Thanks but tried that as posted earlier & get the happen error, now I'm not sure of the battery charge so want to charge that before trying again with CWM but can't charge it from the MAGLDR screen, tried plugging into the mains & reset but what ever I do it boots into MAGLDR & no charge

Yes MAGLDR makes your phone do that. Have you been able to flash a ROM yet no? Are you making sure your going to the 'USB Flasher' in MAGLDR? Run the daf when you're there, if you're getting that error still, make sure you disable USB connections inside of ActiveSync or WMDC on Vista/7.
Sent from my HTC Vision using XDA App

Thanks I'll try that next then - any ideas on getting the battery charged up again now though?

Junks666 said:
Thanks I'll try that next then - any ideas on getting the battery charged up again now though?
Click to expand...
Click to collapse
I would suggest you to reflash winmo from boot loader screen using micro sd in order to be able to charge battery. After that, you can retry the android flashing

Thanks - sorry if I'm a bit thick here, so does that mean I've put the phone back to original then start the whole process over again from the beginning?

You're battery should be fine while the USB is in. It won't die on you while flashing through MAGLDR. Once the USB is in.your phone it will he fine. Silly old cautious men. haha
Sent from my HTC Vision using XDA App

lol Ok I'm going to try one more time then give up!!
I have tried both methods now
Tried installing 3 different NANDS without CWM using the DAF & get the happen error with all three:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Tried with & without WMDC running
Then tried as suggested using CWM but after getting through all stages the last bit I get CWM Recovery files not found!! I checked the SD card & the Cleandroid winrar file is there, its there zipped & now unzipped in a temp folder (which shows on the phone) & also in the root just in case..........nothing nada zippo.............files not found.
Any last ideas before I buy a Nokia?? lol
Its really frustrating, I managed to get all the way through on both routes but can't get the ROM installed either way.
Thanks

Are you able to go in to CWM by going to AD Recovery in MAGLDR? How are you trying to flash a ROM? Go in to the settings in WMDC and make sure the USB Connections is unchecked.
Sent from my HTC Vision using XDA App

Junks666 said:
Not yet Mez
Well I thought that seemed easy to understand TMac but.................
I intalled the cleandroid zip file but I guess since it didn't work you meant extract to the SD card (CWM didnt find the cleandroid zip file)? Also is there anyway of booting normally at the moment as I think I should charge the battery again after all this trying without success before I try again?
Thanks for your patience, I'm really not used to this sort of thing at all & at 54 yrs old I think I'm doing quite well!! lol
Click to expand...
Click to collapse
Sorry man did not mean to seem rude. I just wanted to make sure you tried the CWM method as it is the easiest way to me. also yes you are doing freaking awesome considering I know your age now. Not to say older folks are illiterate or stupid just some older people have a hard time grasping new new technologies. Don't worry none my friend, like member mezcal9 posted yesterday we will get you back going.
Also do you have this, striaght from the MAGLDR OP
You need radio which support 576 RAM.
Click to expand...
Click to collapse
Skellyyy said:
You're battery should be fine while the USB is in. It won't die on you while flashing through MAGLDR. Once the USB is in.your phone it will he fine. Silly old cautious men. haha
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Sorry Skellyyy but yoy are wrong about this statement as you have to have a ROM runing for your battery to charge. MAGLDR does not support battery charging yet.
*Fixed Power-Off-Cable-Plug-Stop. Phone now detects this situation and reboots. Battery controller inside LEO needs runtime control during charge, it implemented in OS.
Click to expand...
Click to collapse
Notice it says it is implemented by the OS. Check my sig for a link to the thread.

nand question plz1

i just put on nand rom for the first time, and i want to re-do it with american android, but when i try running magldr 1.13, it says usb not connected and i cant get past this to flash american android, any answers for this plz, ty much, error :260:

can you give us pls some more input on what you are doing exactly? Where does it get stucked, when you boot it or do you select something from the menu and then the problem with no usb connected occurs?

well when i go into magldr and try to get it to go into usb flash, so i can flash american android, it opens and i check the boxes and click next, then it scans for the usb, but it wont bring up an error, and it tells me to make sure my usb is connected and it is connected already???? im a noob at this so i cant explain to much into what im doing wrong, im just going by the steps ive read, i have android on it and it works just great, but i want a dif rom, not the stock rom i found.

when you choose usb flasher do you see:usb flasher......usb
i think americandroid is using daf method.so right click on aca.exe and run as administror.
be sure you downloded mgldr version of it (not clk)

never mind, my mistake

when i try running magldr it says error and it wont run magldr, and usb is connected, but it says it isnt...?

plz can anyone tell me what im doing wrong??? im running magldr and my hd2 is connected, but when i check the boxes in magldr and click next it looks for my pda, then says error 260 and make sure cradle/cable is plugged into pc, and it is, and it wont go into magldr so i can click usb flash drive...???

please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr

mutil said:
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
Click to expand...
Click to collapse
ok last night i did my first nand on my nd2, i ran the hspl, then i ran the magldr 1.13, then i scrolled down to usb flasher, then i ran the rom that the youtube link gave me, http://www.youtube.com/watch?v=cvS4EvS0PAw then it all worked, i had android on my phone, but i dont want the rom in the youtube link, i want one from this forum american android, and i was wondering, when i go to run magldr on my nand android i flashed, it tells me error and that to check if my phone is connected, and im just trying to do what i did in the youtube video but with a dif rom, but it wont work from android, it did just fine on wm 6.5, and my phone is connected to the usb, but it tells me it isnt, but i can still transfer music and other things, but when i go to run magldr it tells me my phone isnt connected, so i cant get into magldr and scroll down to flash usb and use the rom i want to use from this site, better? plz help thanks much.

in order to go into mgldr menu power off the phone.then power on but hold down the power key until mgldr menu comes. its not necessary to reload mgldr for each rom.if you installed it to your phone now it is in it.

i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<

getting phone working...
_fly
have you used the the HD2 toolkit? You can find/download from here
http://forum.xda-developers.com/showthread.php?t=1090783
try wiping the phone with task29, then loading the MAGLDR or cLK / which ever nand/rom you want to use. Hopefully this works for you....

_fly said:
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
Click to expand...
Click to collapse
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951

mutil said:
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
when i go into ad recovery it says no boot source???

Then you have to install cwm first.

I have had a similar problem with my phone and what worked for me was disconnecting the usb cable and plugging it back in. then it seen it as usb and i was able to flash the ROM. i know it seems rather simple but this small fix might work for you as it did for me.
if you can install cwm i would highly suggest to do that and also looking into the hd2 toolkit as someone else as already pointed out.

Help please! Update problem after installing MAGLDR V1.13

Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!

sofaford said:
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
Click to expand...
Click to collapse
Wrong forum, should be in the Q&A. You'd have thought it would be obvious, seeing as you're asking a QUESTION, but somehow people don't pick that up
Also, you really need to read more. There isn't any point in installing MAGLDR then Task29ing, in fact there is very little point in Task29ing at all unless you experience major problems with your phone. A simple data wipe (in CWM) and repartition has never failed me.

If you did a task 29 after doing the other steps first then you wiped everything back off. Install magldr again then CWM and then install your rom of choice.
Also for being a member since 2005 you should know not to EVER post a question in development.
Mods please move to Q&A
Sent from my Galaxy Nexus, T989, HD2, G2x or Touchpad.

moved

Sorry for posting it in the wrong forum.
Many thanks for the comments...I cannot install anything at present because once update process starts it times out at 0%. Task29 did not work either - it also gets stuck at 0%.
Only thing that works is Boot loader and USB mode.
As Boot loader is working I tried to install NAND Android following this instruction:
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
But DAF is giving this error back:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)

thats all old instructuions.
go get the nand toolkit, and also get hspl3
...
phone into bootloader (tri colour screen, not magldr)
connect usb
run hspl3
choose 2.08.hspl (don't assume its already 2.08.hspl, check it, hanging at 0% is often a sign of no hspl)
when reboots immediately go back into bootloader
*(* from here on you can do all this in the nand toolkit*)*
flash magldr
when it reboots enter magldr
(if phone hangs on a htc screen and doesn't show magldr, you need to flash radio 2.15.50)
phone into magldr
connect usb
choose 'usb flasher'
in toolkit select desired system partition size and cache size
when its finished
phone back into magldr
choose 'ad nand'
this starts cwm
(if you havent yet partitioned your sd card with an ext partitio, look ity up and do it now)
select 'install zip from sd'
select zip from sd
browse to where you dropped the rom.zip file onto your sd card.
when it reboots you're done, , alternatively it failed somewhere, , which step?
if you get apparent driver errors, theres a nice big button called drivers in the toolkit (i think?)

Many thanks that worked like clockwork

HD2 bricked!! Need urgent help from anyone!!!

Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!

back to winmo use sd card method..

If you can enter in bootloader (with color band) VOL.DOWN + POWER
plub usb to pc and flash a stok rom

I tried this with several Official Roms but no one function..
still hang on 0 % or get a Errormessage on 1% that Image is corrupt over USB
and over SD every try hang with "Errormessage 18003 and Radio_V2 - Fail
LEOIMG.nbh - FAIL
Update Terminate
UPDATE FAIL

You didn't brick it man. Just flash CLK or MAGLDR.

I tried DFT_LEO_MAGLDR113_DAF and it gone 100% but after it I got the Error [270] File is Corrupt over USB.
Try to install MAGLDR over HD2 Toolkit, but hang on 0 %
Try to install CLW over HD2 Toolkit, it gone 100% but after it I got the Error [270] File is Corrupt
Try to install MAGLDR over SD with renameing magdlr.nbh to leoimg.nbh
Update Success but still white screen.. try to open phone with holding power key to enter magdlr menu no sucess - still white screen

You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan

First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)

NLsalvador said:
You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan
Click to expand...
Click to collapse
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR

m4gnum87 said:
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR
Click to expand...
Click to collapse
trying it on other computer with a good cable.maybe it's your laptop has something wrong.

try the goldcard method (you cannot generate it for free anymore, but you can google for a good one searching the CID for your sd, try several sd until you will find an sd with a know CID and a goldcard image ready to download for your CID) [try with sandisk/kingstone 2gb, goldcard is not supported with SDHC like 16gb one], and flash from sd in bootloader the nbh image extracted from wwe RUU (you will find *.nbh image under temp folders when you run *RUU*.exe)
maybe with goldcard you can force radio flashing
also try mtty and some tasks (like 2a if i remember well) that try to repair your bad blocks
if you can't solve with these 2 method, sell it on ebay and buy a new one for the same price

The official roms can be extracted with winrar, extract it and copy RUU_signed.nbh to the root of your sd card. Insert the sd and boot it holding volume down and when entered bootloader press volume up. Now it should put it back to WinMo. Then Flash HSPL and Magldr.

m4gnum87 said:
Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=668347

ph03n!x said:
First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)
Click to expand...
Click to collapse
i tried as you told with reinstalling the drivers for WMDC and redownloading all other things but still the same s... I think the problem is the 2.08.SPL i cant change it or delete it.. or maybe a cache of anything is bricked so he hang on 0% or 1 %... i dont know im so frusted

look at my post, try goldcard method, should force flash process

pirlano said:
look at my post, try goldcard method, should force flash process
Click to expand...
Click to collapse
how i can go over the gold card method if my hd2 is not running? i see in the tutorial that i must get to storage mode and get the SD Cards Serial number..???

jak11 said:
Try this http://forum.xda-developers.com/showthread.php?t=668347
Click to expand...
Click to collapse
The Rom is still no more avaiable to download and if start mtty i have no selection for USB :S

still not solved, i can guide you through skype it will be easier

Task29 ve HSPL 3 araçlarını tekrar indir. Belki sorun onlardadır.
Download Task29 and HSPL 3 again, the problem may belong them.

nphaibk said:
still not solved, i can guide you through skype it will be easier
Click to expand...
Click to collapse
for sure i will be avaible in 3 hours if you want?