Related
I am trying to upgrade MAGLDR 1.11 TO 1.13. I gert to the stage where it begins but just freezes at 0% then reports error 262.im using latest radio etc.and yes im starting romupdate exe as administrator.i even tried 1.12 with same result.pleeese help.if not is it still poss to flash wp7 using 1.11?ive got as far as even obtaining activation code.
Have you tried flashing from bootloader?
if you mean via the tri colour screen you get while holding vol button down then yes thts what ive been trying.
don't know much about it to be honest but try flashing a rom to wipe magldr off then try to flash 1.13 pretty sure that should work... but im no expert
Try running a task 29 to completely wip the device and start from scratch.
Thought of doing that but what of I can't load magldr again.no more nand droid? Not worth thinking about.can anyone tell me if 1.11 is able to flash wp7? Yeah I know there won't be nand droid only sd but only want to try wp7 for a bit.
found out the problem.i had SPL.2.08 not Hspl.once intalled HSPL.3 was able to upgrage to MAGLDR 1.13
Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
Now I can't boot into windows 6.5.
I tried turning it on and it just vibrates 7 times and doesn't boot to 6.5.
Finally got a WP7 rom to install, but now it's stuck on
Booting WPH
WPH LOAD
1EFatal Hit 1
What do I do?
Finally got a WP7 rom to install, but now it's stuck on
Booting WPH
WPH LOAD
1EFatal Hit 1
Give us more information about your phone please.
What do you need?
It's a stock TMOUSA HD2.
My first HD2 broke, I just got this one today.
I put WP7 on the first one.
I was following the instructions here.
http://forum.xda-developers.com/showthread.php?t=971478
Note: It doesn't boot, so I can't check radio or anything like that.
The Bootloader should still be working, that's the most important thing now.
You must try to get the Spl on your device, for that just go to the Hspl installer and choose SPL the best should be 2.08 or 1.66.
Do a task 29 then.
After that you have a clean HD2, dont make the things complicated, flash a costum Rom that's the best at my opinion
http://forum.xda-developers.com/showthread.php?t=944995
If you need some help to flash ask youtube
Here a few examples for videos which could help you:
http://www.youtube.com/results?search_query=how+to+install+wp7+on+hd2&aq=f
the first 4 results should be interesting for you
PS: For entering in Bootloader push Power button and hold the volume down button at the same time, until tri colour screen appears
Task 29?
What's that?
Task 29 basically formats NAND and leaves it completely blank, (think about formatting harddrive on your PC).
I would go into bootloader and flash a STOCK rom. Then flash a 576MB compatible radio. Then run Task 29. Then install magldr 1.13, then flash WP7.
That's the way I did it and have had no issues at all with WP7.
ranestari said:
Task 29?
What's that?
Click to expand...
Click to collapse
Task 29 for HD2 in youtube
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
more data needed.
it looks like you're saying it loads HSPL 2.08 then loads magldr then when it tries to load the ROM it gives the fatal thing right?
so what happens after you flash a winmo ROM? does it hang? where? what exactly happens when you turn on your phone? have you tried flashing stock WM6.5?
Yup the fatal error appear on magldr v.1.13
Ive tried task29..
Then when i tried install windows stock 6.5 it stuck on the white htc screen without any red letters on the bottom like usual..
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
I had the same problem. I tried every imaginable solution and nothing would work. I flashed WinMo from the bootloader screen, and SD card and it would sometimes load, but would freeze or hang up most of the time during boot. I tried flashing a DFT ROM, and it would boot about 20% of the time, and hang the rest. When it would boot, it would freeze once it got warm.
Luckily my phone was still under warranty.
fra1977 said:
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
Click to expand...
Click to collapse
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
....................
I have the same problem. After trying everything, now it sometimes boots into windows but after a while it suddenly stops working and reboots and sucks on white htc screen....
Tomorrow it will go back for warranty...
does anyone knows how this fatal hit error happens? I used the phone without problems for over 2 weeks with android on nand, before the problems started.
Sent from my HTC HD2 using Tapatalk
I think that this is the problem that made us wait too long for MAGLDR.. cotulla thought that he fixed it but looks like he didin't... i think the bootloader has overwroten the SPL..
Can you guys give more details about your HD2s like "When have you bought it" "which screen you have" ?
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
It seems to me like many bad blocks on NAND...
How to verify that:
1) flash cLK (chose a partitioning your prefer)
2) via cmd run the following commands
Code:
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot erase cache
fastboot erase userdata
If you have bad blocks it will show up in console of cLK
It will look like this
[6521] can't erase block @ 3424
[6521] bad block @ 3424 (or something like that)
You need to have adb drivers installed and fastboot.exe for the commands. If you don't have download them from here
Put the in a folder i.e. c:\android
navigate with cmd there and run the commands.
CWM can recognize bad blocks and skip them, therefore if you have many in each partition you can create larger partitions for /boot and /system and your phone will work properly until you decide to send it for repair.
If i remember well each block is 128KB
MAGLDR v1.13 on my HTC HD2
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Same problem here, it seems the problem is with HD2 1024mem.. Tmous?? will CLK installation will solve? anyone with more suggestion? I would really really appreciate..my hd2 is laying on table for 2 weeks now with no solution
Ive noticed the fatal hit error on the hd2s with those tiny dots in the screen.
sent from my Nexus S
teutakarakashi said:
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Click to expand...
Click to collapse
Your problem is wrong hspl.Magldr works only with hspl 2.08
sent from my hd2 using ics
WorldWide60 said:
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
Click to expand...
Click to collapse
agree with that
Did a hd2 the other day. Fatal hit error popped up. Done hundreds of hd2s. Bricked 2. On the particular hd2 i booted into magldr and did a reset. Had to reboot bout 20x to finally work. When it finally booted the touch was unresponsive. After another 10 or so reboots it finally stuck. Easy phone to mod but highest brick rating for me. I flash phones for a living so i know what im doing. Ive bricked my own g1 learning back in 09 and bricked 2 hd2s in 2011. There must be certain hd2s that dont accept the flash. Ive noticed the hd2s with the dots in the screen have been the only ones that give a hard time. Are theres the euro version? I only flash android on them not keep up with its development.
sent from my Sensation
Hi I have HD2 with 576 MB of RAM. My phone was working fine but one day could not boot.
I have tried all possible combinations and permutations to get the android working on my HD2 again but to no avail. I think the recovery is not working or not getting installed properly.
The HSPL version is 2.08.HSPL and the radio version is 2.15.XXXXX. Have also tried doing task29 but no results. The android is Typhoon 3.7 with CM7 the stable version.
The sequence is
1) Task 29
2) HSPL
3) MAGLDR
4) Recovery (tired both 150 and 250 MB sizes)
Also tried the old versions of the recovery where in you have to copy two files to the root of the SD Card.
All the installation happen without any error and I get success message.
But when I select AD Recovery in the MAGLDR menu it does not go into the recovery menu just simply reboots.
Have also tried installing the stock WM 6.5 rom from the HTC site but after installing that I get the error message "The OS installed in not supported by the harware please contact the site / service center." or something like that.
Please help.
Also please let me know the difference between CLK and MAGLDR method. and any link for the complete installation using CLK method
Note: My phone started going bad after i installed "Fruit Ninja" game on my phone and played only once. and after that it started.