I am trying to upgrade MAGLDR 1.11 TO 1.13. I gert to the stage where it begins but just freezes at 0% then reports error 262.im using latest radio etc.and yes im starting romupdate exe as administrator.i even tried 1.12 with same result.pleeese help.if not is it still poss to flash wp7 using 1.11?ive got as far as even obtaining activation code.
Have you tried flashing from bootloader?
if you mean via the tri colour screen you get while holding vol button down then yes thts what ive been trying.
don't know much about it to be honest but try flashing a rom to wipe magldr off then try to flash 1.13 pretty sure that should work... but im no expert
Try running a task 29 to completely wip the device and start from scratch.
Thought of doing that but what of I can't load magldr again.no more nand droid? Not worth thinking about.can anyone tell me if 1.11 is able to flash wp7? Yeah I know there won't be nand droid only sd but only want to try wp7 for a bit.
found out the problem.i had SPL.2.08 not Hspl.once intalled HSPL.3 was able to upgrage to MAGLDR 1.13
Related
Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
HI!
Well i have installed MAGLDR 1.12 before and had NAND. BUt now i want to try out CWM, and need 1.13.
But how do i update to 1.13? i tried to just run the ROMUpdateUtility.exe, but it cant find my phone. so i cant install it.
please help me asap!
the same way you installed 1.12 the process is the same
man, i just told you all, that ive tried to run the ROMUpdateUtility.exe, but it doesent find my phone.
please try to help me!
dont just say "you just update.." or something that doesent help.
Do i really have to reinstall Windows again?
im a genius so i solved it myself!
just hold VolDown + onbutton - to go to bootloader.
then connect the usb, and flash the MAGLDR
no you just did what you did intially to put magldr on, as per what i said
i think 1.13 batter.
if you cant do the update through bootloader or anything the you have only one option left reflah a stoch rom and then do it
Richy99 said:
no you just did what you did intially to put magldr on, as per what i said
Click to expand...
Click to collapse
Why would you even bother to give such a HELPFUL post? Obviously if he remembered how to flash MAGLDR he would of done it. It's not hard to just say to boot to HSPL and do it...
Sent from my HTC Vision using XDA App
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
when you install magldr it wipes windows off the deivce, you are aware of that?
when you start the device with magldr you need to hold the power off button til you get the menu up then you can use the usb flasher if it is a daf installer or you need to install CWM recovery and install a rom that way
either way windows will no longer be on your device
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
matze91 said:
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
Click to expand...
Click to collapse
what version of android did you install? you need HSPL 2.08 or it will not work anways
if all you done was install magldr without install anything else it will do exactly as you have described because there is nothing for it to load up
I think you misunderstood me
Normally if magldr was installed correctly I should see a screen like this (http://www.xda-developers.com/wp-content/uploads/2011/02/MAGLDR-boot-menu.jpg), when I boot with hold power button+left arrow key.
But when I press this combination it does not boot to this screen. It just does nothing. And this is why I can´t proceed with any instruction, because I need a working magldr.
matze91 said:
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
Click to expand...
Click to collapse
I'm new to all this too so bare with me.
I think you may have installed the wrong HSPL. This is from the HSPL thread.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
When you installed HSPL you chose the wrong option. Someone more knowlegable will hopefully come along and tell you how to fix it.
After destroying and downgrading of HSPL with an original HTC Win Rom I could install a new HSPL again...
Don´t ask me how I´ve done this, but it worked
So thanks to all!
Hi, I attempted to install Android on my GFs HD2. It was running Windows 6.5.
HSPL 2.08 was already installed and I installed MAGLDR 1.13. In MAGLDR I was able to select menu items but pressing the call-button didn't do anything. How do I unstuck myself? Help greatly appreciated.
UPDATE: I tried to flash the RUU_signed.nbh via SD from RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship but it failed, I guess. Now it won't boot (says Software Update failed, please try again). SPL 3.03.0000 is now installed. Slowly getting nervous over here. What's my way out of this mess now?
You should be ok to install hspl 2.08.
If you haven't already got it, get the HD2 nand toolkit (kusbedi) it makes things a lot easier. Then have a good read here.
OK, thanks, didn't know you could install HSPL from the bootloader too.
HSPL 2.08 is now installed. Still the same problem with MAGLDR not reacting to the call button, though. I guess I'll try CLK then.
You can just as easy install magldr again if you wish using the toolkit...
Hmm, I now formatted the memory with Task 29 and reinstalled MAGLDR, still no reaction to call-button presses.
I've got two hd2 s, and on both magldr never accepts the first press of send, I have to click it again slightly (only slightly,) firmer and fractionally longer. If I try the slightly longer firmer press first, it still doesn't accept it till the second press.
My point being to make sure its really a problem before you start re flashing.
If you assure yourself its really not accepting, try reflashing 2.08.hspl again but using hspl3, (there are occasional issues with Hspl4, not usually connected to magldr, but everything's worth trying) and then reflash magldr. The nand toolkit as advised is a good way to go.
Winmo roms, radios, hspl, task29... all can be flashed from bootloader, and indeed its a better way to flash.
grmpf... HSPL 2.08 from HSPL 3 was no help.
Now with cLK in Clockwork Mod, left button doesn't work either!! Points to a mechnical problem, but GF (owner) says no. Will keep trying.
polacco said:
grmpf... HSPL 2.08 from HSPL 3 was no help.
Now with cLK in Clockwork Mod, left button doesn't work either!! Points to a mechnical problem, but GF (owner) says no. Will keep trying.
Click to expand...
Click to collapse
Try installing a touch recovery? That will help you solve your problem. Also download a app like Quick Boot so you can boot straight into recovery from the Android OS.
T-Macgnolia said:
Try installing a touch recovery? That will help you solve your problem. Also download a app like Quick Boot so you can boot straight into recovery from the Android OS.
Click to expand...
Click to collapse
+`1
Thanks guys.
I successfully installed TWRP, the touch recovery built, and flashed NexusHD2-ICS-4.0.4-CM9-HWA V2.1 from there.
GF is going to be very happy!
Cheers
TWRP 2.0.0 thread
http://forum.xda-developers.com/showthread.php?t=1292146
TWRP 2.1.2 thread
http://forum.xda-developers.com/showthread.php?t=1647575
Dear All,
I have been flashing roms on the HD2 for several years, and now I have got the nexus 4 for a while I only kept doing it for my brother. I wanted to try another rom but he tried to do get back to factory settings first.
What I did (HSPL 2.08 was already on the phone):
With HD2 toolkit:
- task 29
- flashed MAGLDR, keeps on white HTC bootscreen, no menu
- tried to flash clk but I get an error all the time
- flashed stock rom, works like a charm
then I tried flashing magldr via DAF method but that doesnt work either...
I never had this problem because when I flashed MAGLDR it always booted into MAGLDR, then I flashed the right nand partion for CLK and then I flashed several roms with AD recovery menu in MAGLDR... But this time I really don't understand what might be going wrong...
Any ideas?
thanks in advance
grts Jochen
I'm not really that kind of guy that suggests something to replace a broken thing, but in this case I'm going to say why not try cLK?
Try to redownload MAGLDR's package and see if it works. Does the flashing complete successfully?
magldr stays on white htc screen: try reflashing hspl / radio 2.15.50
Magldr don't work without Radio Rom,
If your task29 in't the one modded by Dollop you have erase the rom radio.
As Says Gilbert32 flash the rom Radio and should be fine...