Related
i was running imilkas glacier NAND rom and out of nowhere the screen freeze and im trying everything i change roms and nothing. is there a solution for this or i lost my hd2 ?
Huh?
With that little information, it´s not really easy to give hints or tipps.
Sorry, mate, but you should be a bit more generous describing the facts... (MAGLDR version, SPL version, Radio ROM version, etc.)
But then again, yes, sometimes it happens that the screen, the mainboard or whatever fail.
MAGLDR version 1.13, SPL 2.08, Radio 2.15 and is tmobile hd2. and what do you mean by fail that is impossible to make it work again?
flakito81 said:
MAGLDR version 1.13, SPL 2.08, Radio 2.15 and is tmobile hd2. and what do you mean by fail that is impossible to make it work again?
Click to expand...
Click to collapse
And what are you trying to change roms?
Have you tried to flash stock WM via bootloader from SD or via USB?
What happens when you try to flash via MAGLDR?
Please be a bit more descriptive if you expect help from people.
ok im trying to install a stock rom via usb but i cant i boot into magldr usb flasher and it says that i dont have it connected to the pc and i dont now another way to do it and if i turn on the phone i cant pass the lockscreen i dont now what to do. if you need more info please let me know i dont now to much about this. thanks
flakito81 said:
ok im trying to install a stock rom via usb but i cant i boot into magldr usb flasher and it says that i dont have it connected to the pc and i dont now another way to do it and if i turn on the phone i cant pass the lockscreen i dont now what to do. if you need more info please let me know i dont now to much about this. thanks
Click to expand...
Click to collapse
You dont flash a stock rom using magldr. Flashing a stock rom overwrites magldr so how do you expect to be able to flash via magldr in first place?
To flash a stock rom you need to power phone on while holding volume down, this will put your phone into bootloader.
From bootloader you can flash a stock windows rom via USB or if you have the .nbh file you can rename it to leoimg.nbh and then put it onto root of sd card and then enter bootloader and it will flash to phone.
If you want Android then you have to do it via magldr.
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Abagnale said:
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Click to expand...
Click to collapse
Don't use MAGLDR to flash your ROM. Hold the Volume Down rocker when you turn you phone on to access the bootloader (tri-color screen) and then plug your phone into your computer via USB. You should then be able to flash your stock ROM with no trouble.
Alternative: To go full stock, including going back to the stock SPL, check my signature for a link on flashing via the SD card.
Thank you for you reply After several attempts I managed to get my winmo back on via SD because RUU couldn't see my phone
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Abagnale said:
Thank you for you reply After several attempts I managed to get my winmo back on via SD because RUU couldn't see my phone
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Click to expand...
Click to collapse
Yeah you lose everything. Yeah, if you needed to send it away now, you could as it has stock everything. May I ask, why did you install MAGLDR then not even use it properly? What were you trying to do? Dual boot WP7 & Android?
thanks!
Don't you worry I was doing everything by the book
Maybe you know why MAGLDR was turnin on even when I didn't hold the power button ?
Abagnale said:
thanks!
Don't you worry I was doing everything by the book
Maybe you know why MAGLDR was turnin on even when I didn't hold the power button ?
Click to expand...
Click to collapse
When MAGLDR can't find anything to boot up (no properly installed ROM) it defaults to the same menu you see when holding the power button down.
It's strange cause the ROM was flashed properly, at least I think so. It was working properly...
MAGLDR was probably turning your phone in because it was connected to a power source. This had to be done because there was a bug in the old Magldr where you had to keep pulling out the battery. It doesn't go to the bootloader (HSPL) though. It'll boot up and say kernel failed.
What are you trying to do now, reinstall magldr?
Tried couple times and I didn't manage to install Android using MAGLDR 1.13 and CMR.
Now I'm back to WinMo and done for now with flashing Android. Don't want to have an expensive paper holder.
You probably had the wrong partition size in CWM.
I don't think there is really a way of bricking your phone doing this other than flashing an imcompatible radio. I've never had any trouble with flashing with CWM or MAGLDR. You say in your first post, you were trying to boot SD AD? You know that's not for .zips from CWM? That's for people who want to dual-boot WP7 and Android, you have to boot AD NAND for CWM.
CWM was already prepared by the developer
Oh...I was following the video tutorial and the guy gets into the recovery mod by getting into the SD AD
http://www.youtube.com/watch?v=-pxucOLY488
Actually I stuck at that point
That's the old way! There's a new way where you just flash a DFT and you go to AD Recovery in magldr an poof! CWM.
Here's the thread just incase you feel like doing it. http://forum.xda-developers.com/showthread.php?t=898913
Don't forget to update your HSPL and radio before doing anything though as you're back on sh*tty WinMo.
I will check on it since you're encouraging me not to give up
Ha ha! Yeah, well I like helping people and Android is just a way better OS then WinMo. Any troubles, just post here and I'll try to help.
Thanks mate, really appreciate your help
No problem. So did you get it working yet or what?
PS. don't forget that thanks button if I've helped. ;D
Not today mate, maybe tommorow will let you know
[EDIT] Wait...today is "tommorow" so "maybe later" I'd say
did it already post #12
Nice... You might aswell do it now then... so you can spend tomorrow looking for apps and getting used to Android.
If I wouldn't have to write my MA dissertation, I would have my HD2 running Android by now
Have you tried it yet?
I'm currently having problems with my HD2 too.
Let's hope this stock ROM works.
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
hold power button until magldr menu appear
in ad recovery you can wipe anything
Pentuni said:
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
Click to expand...
Click to collapse
good to know u want to start from scratch...u ll never know wats been put it that device... ....here is wat you can do
i had put out these steps in another thread to help out a fellow XDAian... try
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
I tried to get task29 but my PC doesn't recognize the hd2 even on bootloader.
Sent from my MB860 using xda premium
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
It's better if you download the drivers because it's useful for later needs...
Best regards
Sam Razzy...
Sent from my HD2 using xda premium
Pentuni said:
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
Click to expand...
Click to collapse
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
I have the T Mobile US version, HSPL SPL-2.08.HSPL 8G XE COtullaHSPL 0x05 0x50(what it says on tricolor bootloader). The radio i tried to install is 2.15.50.14.
I got the drivers, my PC finally got a connection with the HD2 so i performed a task29 and wiped the phone then i followed your guide tried to install the radio but the process with CustomRUU.exe got stuck at 96% and said there was an error "this update utility can not be used on your device." and now the phone shows an Update Fail screen without a radio i cant install MAGLDr then install WP7 on it so what can i do?
kylew1212 said:
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Pentuni said:
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Click to expand...
Click to collapse
Okay sorry I should've explained more..
yes you have to have a radio.
Yes you can install ics beta 10 with clk.
No you cannot install wp7 with clk magldr is required for that.
If your phone is getting close to running out of battery I would flash clk 1.5 via SD card and then charge the phone up
Sent from my HD2 using xda premium
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
I'm having the same problem until today.
Did a task29, installed magldr, cwm, then a rom, radio is 2.15.50.14.
It can boot to CWM, it can reinstall the rom but it's gets stuck in the go go go after restarting.
Please help
TIA
I know how to use magldr, but not tons about it.. also I think you guys should post in the wp forums someone there may be better help
Sent from my HD2 using xda premium
Pentuni said:
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
Click to expand...
Click to collapse
Its happened to me before. Make sure as soon as you flash magldr, thats you clear mbr on sd card and use last 24 nand, and you will be fine, otherwise you will stay stuck on go go go go
good luck!
Yep.. thats a problem for you, but also for me, i have HTC HD2 fully working, just replaced digitzier soon, WinMo just works flawless thought it sucks ballls, and whenever i try to do task 29 then install radio then install magldr then install cwm with the required partition, i get stuck on GO GO GO! ..
Hi, I attempted to install Android on my GFs HD2. It was running Windows 6.5.
HSPL 2.08 was already installed and I installed MAGLDR 1.13. In MAGLDR I was able to select menu items but pressing the call-button didn't do anything. How do I unstuck myself? Help greatly appreciated.
UPDATE: I tried to flash the RUU_signed.nbh via SD from RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship but it failed, I guess. Now it won't boot (says Software Update failed, please try again). SPL 3.03.0000 is now installed. Slowly getting nervous over here. What's my way out of this mess now?
You should be ok to install hspl 2.08.
If you haven't already got it, get the HD2 nand toolkit (kusbedi) it makes things a lot easier. Then have a good read here.
OK, thanks, didn't know you could install HSPL from the bootloader too.
HSPL 2.08 is now installed. Still the same problem with MAGLDR not reacting to the call button, though. I guess I'll try CLK then.
You can just as easy install magldr again if you wish using the toolkit...
Hmm, I now formatted the memory with Task 29 and reinstalled MAGLDR, still no reaction to call-button presses.
I've got two hd2 s, and on both magldr never accepts the first press of send, I have to click it again slightly (only slightly,) firmer and fractionally longer. If I try the slightly longer firmer press first, it still doesn't accept it till the second press.
My point being to make sure its really a problem before you start re flashing.
If you assure yourself its really not accepting, try reflashing 2.08.hspl again but using hspl3, (there are occasional issues with Hspl4, not usually connected to magldr, but everything's worth trying) and then reflash magldr. The nand toolkit as advised is a good way to go.
Winmo roms, radios, hspl, task29... all can be flashed from bootloader, and indeed its a better way to flash.
grmpf... HSPL 2.08 from HSPL 3 was no help.
Now with cLK in Clockwork Mod, left button doesn't work either!! Points to a mechnical problem, but GF (owner) says no. Will keep trying.
polacco said:
grmpf... HSPL 2.08 from HSPL 3 was no help.
Now with cLK in Clockwork Mod, left button doesn't work either!! Points to a mechnical problem, but GF (owner) says no. Will keep trying.
Click to expand...
Click to collapse
Try installing a touch recovery? That will help you solve your problem. Also download a app like Quick Boot so you can boot straight into recovery from the Android OS.
T-Macgnolia said:
Try installing a touch recovery? That will help you solve your problem. Also download a app like Quick Boot so you can boot straight into recovery from the Android OS.
Click to expand...
Click to collapse
+`1
Thanks guys.
I successfully installed TWRP, the touch recovery built, and flashed NexusHD2-ICS-4.0.4-CM9-HWA V2.1 from there.
GF is going to be very happy!
Cheers
TWRP 2.0.0 thread
http://forum.xda-developers.com/showthread.php?t=1292146
TWRP 2.1.2 thread
http://forum.xda-developers.com/showthread.php?t=1647575
Hello
I just flashed CLK on my hd2 using the toolkit, I also flashed the toolkit recovery (which i believe was v 4.3)
Now when I try to boot to recovery using Home + red buttons I get this error in the middle of the command lines
"ERROR: CANNOT READ RECOVERY_HEADER"
I tried to wipe all and reflash everything again but I keep getting the same error.
I looked everywhere but can't find any answer.
Is there any other way I can install a new ROM without accessing the CWM? like using the command prompt.
I also attached a screenshot of the error.
Any help would be very much appreciate it. and Please if there is a solution please show the steps for it cuz I am still new with CLK.
The latest stable version of clk is v1.5 which also installs a version of cwm , there is even one that installs twrp recovery too!
No links on my phone but will be easy to find...
BTW did you select clk install recovery option after clk reparation?
Sent from my NexusHD2 using xda premium
shanman-2 said:
The latest stable version of clk is v1.5 which also installs a version of cwm , there is even one that installs twrp recovery too!
No links on my phone but will be easy to find...
BTW did you select clk install recovery option after clk reparation?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I installed clk v1.5.1.1 just now but the phone freezed on "stick together" screen. any other way?
What does it say on the boot loader screen?
how did you Install? All steps you took?
Sent from my NexusHD2 using xda premium
shanman-2 said:
What does it say on the boot loader screen?
how did you Install? All steps you took?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I downloaded this file provided in clk thread "black_lk_20120920-TouchRec_b8" I installed it using the toolkit, I then added the LEOIMG file to the toolkit and flashed it.
And I can't get to the boot loader screen, I get the "stick together" screen once I turn on the phone, and then it freezes.
mjody said:
I downloaded this file provided in clk thread "black_lk_20120920-TouchRec_b8" I installed it using the toolkit, I then added the LEOIMG file to the toolkit and flashed it.
And I can't get to the boot loader screen, I get the "stick together" screen once I turn on the phone, and then it freezes.
Click to expand...
Click to collapse
Hold the volume down button and power on the device is not working ?????
Edit: what LEOIMG file???
shanman-2 said:
Hold the volume down button and power on the device is not working ?????
Edit: what LEOIMG file???
Click to expand...
Click to collapse
UPDATE! Ok I think I didn't install the right file earlier but I just downloaded the clk from here:
http://forum.xda-developers.com/showpost.php?p=21608340&postcount=848
it boots fine to the clk first screen. which I will add a picture of.
but It gives me this message when I select recovery. (Also a picture added)
ps: thank you very much for keeping up with me so fast.
mjody said:
UPDATE! Ok I think I didn't install the right file earlier but I just downloaded the clk from here:
http://forum.xda-developers.com/showpost.php?p=21608340&postcount=848
it boots fine to the clk first screen. which I will add a picture of.
but It gives me this message when I select recovery. (Also a picture added)
ps: thank you very much for keeping up with me so fast.
Click to expand...
Click to collapse
What version of hspl do you have installed?
If it's hspl 2.08 or hspl 3.03 try this,
first do a task29 using the toolkit
Then place the LEOIMG.nbh file on the root of your sdcard.
Now power on the device while holding the volume down button.
When asked to proceed with install push the power button..
This should install clk 1.5 with a default partition size which you can change from within clk later!
Let me know if it works.
shanman-2 said:
What version of hspl do you have installed?
If it's hspl 2.08 or hspl 3.03 try this,
first do a task29 using the toolkit
Then place the LEOIMG.nbh file on the root of your sdcard.
Now power on the device while holding the volume down button.
When asked to proceed with install push the power button..
This should install clk 1.5 with a default partition size which you can change from within clk later!
Let me know if it works.
Click to expand...
Click to collapse
I tried flashing it that way but it doesn't work with me, when I press volume down button with power it only shows the multicolored screen.
I also tried to restore the stock rom, by installing the rom from TMOUS website, my phone also freezes on the firs boot screen, "Stick Together"
by looking at this thread, http://forum.xda-developers.com/showthread.php?t=1063807
I think I got a hardware issue, RIP my hd2
mjody said:
I tried flashing it that way but it doesn't work with me, when I press volume down button with power it only shows the multicolored screen.
I also tried to restore the stock rom, by installing the rom from TMOUS website, my phone also freezes on the firs boot screen, "Stick Together"
by looking at this thread, http://forum.xda-developers.com/showthread.php?t=1063807
I think I got a hardware issue, RIP my hd2
Click to expand...
Click to collapse
Maybe so.
What way did you flash stock rom?
I don't understand why you cannot flash clk from the sdcard!
Have you tried a different sdcard??
What version of hspl do you have on that multicolored screen if you have anything?????
Edit:Hey, I hit the thanks by mistake but wtf, welcome to xda! :laugh:
shanman-2 said:
Maybe so.
What way did you flash stock rom?
I don't understand why you cannot flash clk from the sdcard!
Have you tried a different sdcard??
What version of hspl do you have on that multicolored screen if you have anything?????
Edit:Hey, I hit the thanks by mistake but wtf, welcome to xda! :laugh:
Click to expand...
Click to collapse
I did task29 then downloaded the rom file from t-mobile webisite then put phone on multicolored with usb debugging and ran the file on my computer.
I actually had this phone for almost 3 years now and I flashed about 4 different versions of android but i was using mgldr.
the phone was doing great with me but about 4 days I wanted to go to recovery to back up the phone I got "1E FATAL HIT 1"
I read that some one had the same issue and they switched to clk and it worked fine, and someone flashed stock rom then custom and it worked.
but nothing is working with me, I have 2.08 hspl and I've been using that for a long time, I tried 3 sdcards using both ways of flashing (toolkit and putting LEOIMG file in the sdcard) but it failed in all of them.
PS: thank you for the thank though I have been here since I got the phone and never got one thanks haha.
mjody said:
I did task29 then downloaded the rom file from t-mobile webisite then put phone on multicolored with usb debugging and ran the file on my computer.
I actually had this phone for almost 3 years now and I flashed about 4 different versions of android but i was using mgldr.
the phone was doing great with me but about 4 days I wanted to go to recovery to back up the phone I got "1E FATAL HIT 1"
I read that some one had the same issue and they switched to clk and it worked fine, and someone flashed stock rom then custom and it worked.
but nothing is working with me, I have 2.08 hspl and I've been using that for a long time, I tried 3 sdcards using both ways of flashing (toolkit and putting LEOIMG file in the sdcard) but it failed in all of them.
PS: thank you for the thank though I have been here since I got the phone and never got one thanks haha.
Click to expand...
Click to collapse
I don't understand why you cannot flash clk from the sdcard!
Click to expand...
Click to collapse
Now I do, I think!
I have asked you what it says on the multicolored screen a few times.
Pic please?
Flashing stock rom should do the trick as regards verifying that it's not a hardware problem, but it will have wiped your hspl!
So to install clk v1.5, you will have to re-flash hspl 2.08 (no zeros after the 8) or hspl 3.03!
shanman-2 said:
Now I do, I think!
I have asked you what it says on the multicolored screen a few times.
Pic please?
Flashing stock rom should do the trick as regards verifying that it's not a hardware problem, but it will have wiped your hspl!
So to install clk v1.5, you will have to re-flash hspl 2.08 (no zeros after the 8) or hspl 3.03!
Click to expand...
Click to collapse
Sorry for that, here is a picture of what you need. And this picture is while I have the stock rom installed on the phone now.
I tired to install clk 1.5 before flashing stock rom.
mjody said:
Sorry for that, here is a picture of what you need. And this picture is while I have the stock rom installed on the phone now.
I tired to install clk 1.5 before flashing stock rom.
Click to expand...
Click to collapse
OK, I would not give up yet.
Re-install hspl and this time select "3.03", then task 29 and try to reinstall clk 1.5...
Edit: If the last thing you did was install stock it won't work with hspl installed,
It should say something like..SPL-2.08.0000, use the hspl 3.03 package to downgrade to this spl version and then install stock from pc as normal (MAKE SURE you are using the correct stock rom for your phone) or as I said, try the above...
shanman-2 said:
OK, I would not give up yet.
Re-install hspl and this time select "3.03", then task 29 and try to reinstall clk 1.5...
Edit: If the last thing you did was install stock it won't work with hspl installed,
It should say something like..SPL-2.08.0000, use the hspl 3.03 package to downgrade to this spl version and then install stock from pc as normal (MAKE SURE you are using the correct stock rom for your phone) or as I said, try the above...
Click to expand...
Click to collapse
I am getting really frustrated now!
for clk:
I upgraded the hspl to 3.03, then installed clk 1.5. UNFORTUNATELY I am still getting the same message when I boot into recovery.
for stock rom: (I got it from t-mobile website which is the right one for my phone)
after failing to install clk, I FIRST downgraded the hspl to SPL 3.03.0000 and tried to flash the stock rom but the percentage bar doesn't even move. So I decided to try it with 2.08.0000 but the same thing happens. This doesn't happen when I have 3.03.HSPL or 2.08.HSPL, it actually loads when I have the hspl but then when it is done, I get stuck in "stick together" screen.
mjody said:
I am getting really frustrated now!
for clk:
I upgraded the hspl to 3.03, then installed clk 1.5. UNFORTUNATELY I am still getting the same message when I boot into recovery.
for stock rom: (I got it from t-mobile website which is the right one for my phone)
after failing to install clk, I FIRST downgraded the hspl to SPL 3.03.0000 and tried to flash the stock rom but the percentage bar doesn't even move. So I decided to try it with 2.08.0000 but the same thing happens. This doesn't happen when I have 3.03.HSPL or 2.08.HSPL, it actually loads when I have the hspl but then when it is done, I get stuck in "stick together" screen.
Click to expand...
Click to collapse
Have you tried this it's about the only option left...
I knew I had seen that thread before somewhere..
Maybe someone else has an idea, samsamuel might swing by but worth trying the above anyway...
best of luck
shanman-2 said:
Have you tried this it's about the only option left...
I knew I had seen that thread before somewhere..
Maybe someone else has an idea, samsamuel might swing by but worth trying the above anyway...
best of luck
Click to expand...
Click to collapse
It is not working! I took off the battery and back on and kept holding the restore button like 10 times.
Ugh I got a headache working on this for a week.
Thank you for your help man! and I hope someone can find out what the heck is wrong with my phone.