hello,
please I want o find out how I can recover my window 6.5 back. I downloaded the
MAGLED software and after the download, I took my USB wire off it now I have no way of booting windows back my computer only recognizes that the USB is connected but does not recognizes the phone.
Pls I really need help.
Thank you.
Related
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
hi
i have a htc touch elf0100 and i'm having a lot of trouble trying to get a connection with my pc. i already read every post here and i don't seem to find the solution to my problem.
here's the thing. i make a hard reset because i was having a lot of trouble with the room that i have so, i decided to make it, but when he reboot it won't pass by the align screen and now i'm stuck in the boot loader screen.
it says that the ipl is 2.27.002 and the spl is 2.28.0000, what i need is to make a connection with my pc so i can flash the room with the one that i have. i try with the mtty but i just can't get the usb port open, and i have try everything.
my o/s is win xp sp3
so please if someone could help me, i'll be very thankful
and i'm sorry about my english, bye.
i think the problem is in mini usb port in ur elf. go to htc customer care.
before sending it off to the care center maybe try a different cable
also..when you plug your device in,does it charge?
I kinda had the same problem which disappeared after a while...
cable
I too had a smiler issue, now Im using the cable that came with my camera, and it works perfectly.
I just have the same problem,changed usb cable,tried on other pc with activesync 4.5 but again csn't syncronize with the phone.plz help.
maybe u can't believe this but i tried device reset via phone menu,then synchronization done ok.
Guys
this morning i wanted to try a new rom and did task 29 and reinstall the radio and magldr 1.13 , and when i conected the phone via flasher mode it dosnt connect with the computer the strange thing is it connect via mas storage, i can flash win mobile which i did so my cable works, but I cant flash any android or win phone 7 ,,,i recently formatted my Pc besides that i could do it without any issue earlier what could be the problem
Damn it i cant flash anything via MGLDR it doesn't get connected only WIN Mobile 6.5
Hi, I would think that the problem is that you have formatted your pc, so you don't have ADB installed. Install Android SDK and you will get ADB support.
Thanx , i will try thanx a lot
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
nishanthabgw said:
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
Click to expand...
Click to collapse
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
malybru said:
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
Click to expand...
Click to collapse
thanx will try nw
Hello,
I have a HTC HD2 running on a Android NAND ROM.
I have to unlock the SIM. I was told I had to go back to Windows Mobile first.
Problem is, my USB connection does not work.
WHen the phone is on android, if I plug the cable, my phone recognizes it but nothing happens on my PC (windows 7)
When I am on the bootloader screen, it is only written "Serial" but never "USB".
Tried several cords/USB ports...
Phone isn't connecter in Windows Mobile manager either.
Any advice, please ?
Sometimes you can introduce unlock code from Android too...Try this with another SIM and see it it asks for SIM/network code!
But if still want WM, you should flash it from micro-sd.
vil-2 said:
Hello,
I have a HTC HD2 running on a Android NAND ROM.
I have to unlock the SIM. I was told I had to go back to Windows Mobile first.
Problem is, my USB connection does not work.
WHen the phone is on android, if I plug the cable, my phone recognizes it but nothing happens on my PC (windows 7)
When I am on the bootloader screen, it is only written "Serial" but never "USB".
Tried several cords/USB ports...
Phone isn't connecter in Windows Mobile manager either.
Any advice, please ?
Click to expand...
Click to collapse
Check to make sure you have the proper drivers installed on your computer first, if not you can always download hd2 drivers off xda. This is probably the easiest and safest thing to do first. otherwise, like above you can try it though android and see what happens. Best bet is to instal WM 6.5 with a broke usb is through sd card, but that is not without its risks. Check the forums for the file and "how to" guide, i remember reading it once. Also, not sure how you will back to Android without usb port to flash magldr or cwm? Good Luck with whatever you decide to do, maybe someone else has other ideas.
Hi!
I don't know if this is a right forum but I run into a problem that I can't solve. I had some Android NAND version that stoped to work after a SD card was formated (silly but true). It loaded almost fully but it didn't show any icons and nothing was functional. Even wasn't recognised on PC in bootloader mode. So I decided to go back to stock ROM via SD card. And then it went to 9% and error occured. I tryed to flash again but it goes just to "Loading..." screen and nothing happens.
The worst thing is that HD2 is still unrecognized by PC via USB so I can't do anything via USB. The USB port on HD2 is OK, it was working with HTC Sync on Android ROM, tryed 2 differnet SD cards (FAT32), Windows XP and WIndows 7, HTC Sync, MS mobile device center and Activesync and no luck. Any ide what to do, at least what driver should I use?
All the answers I found include a step with USB flashing and I can't do it...
ok. reinstall windows mobile device center (win 7, vista) or activesync (xp)
open it, connection settings, uncheck allow usb connections and try again. also make sure that you aren't using a usb hub. try other usd ports.
wait a bit. phone drivers should be installed and serial should turn to usb (if drivers installation fails or if this doesnt work, open device manager, and delete the qualcomm usb driver or windows ce (don't remember which one it is in bootloader mode), unplug and let it install it again)
after installation of usb driver succeeds, you should see usb at the bottom of the screen. after that point you can try reflashing official roms
Thank you for your help. I solved my problem and saved my HD2
I was using original USB cable that came with HD2. Then I switched it with USB cable that came with my Evo 3D and that cable is thicker than original HD2. At first attempt HD2 was recognized and after all a driver (Qualcom USB) was installed so I flashed all the way to WP 7.8.
O, what a joy, I tought that I ended with bricked HD2, and now I have WP 7.8 device )))