Hi guys.
First of all let give congratulations to all members of this site and developers for the stuff that bring to us, noobie users all day.
I have two problems with my HTC HD2 and let me try to explain. Sorry my English, im Portuguese. hehe
My story and HTC HD2 starts with one usb charging in my computer and after that the usb for charge and sync never works again. So, my battery went out and i need to buy one in ebay to try flash with original rom leo.
When i start flashing leo with one original rom, it give me an error during update and when i start after that show me a message with a attention signal say "Software update failed! Please try again.".
I try to flash again and the image stucks in "LOADING..."
My bootloader in starts are show in this picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you can help me, i dont know what to do anymore.
I promise a lot of beer in Portugal.
I can not promise I will be able to help you out here. But for people to better help you it would be nice if you could post what exact ROM you are trying to flash from SD. Also what radio version the Rom has with it. Also you did rename your RUU_signed.nbh to leoimg.nbh right? Also please post what model of HD2 do you have, European, T-Mobile, etc.?
you flashed the wrong stock rom from sd card, it removed hspl and now the stock spl wont allow the rom flash to continue, hence RUU in th upper corner telling you it is in rom update mode.
bootloader - usb - hspl4 - 2.08.hspl - flash a rom.
OR
get a correct stock rom for your phone®ion&carrier(your serial number) and flash it over usb, no need for hspl to do this.
Many thanks in advance for your replys.
The problem is that my hd2 dont connect usb.
ah ok, then get the correct stock rom for your phone, and flash it as leoimg.nbh.
it MUST be the correct stock rom for that phone, not just any stock rom, since any other stock would require hspl, which you cant have.
or, you could make a goldcard. If you have a faulty usb port, (is that the problem?) then a goldcard would be very useful since you cannot use HSPL.
Can you point me for the correct topic of goldcard ?
I dont know if is a faulty usb port because i think this happens because change the a lots of roms and android roms.
I already download the correct rom from htc with my serial. I extract with winzip and put in my class 4 8gb sd and stucks again in loading...
oh right, well 8gb cards rarely work anyway, for a start. certainly wouldnt work for a godlcard.
its not clear from your post, what kind of error do you get when you try to flash , example, hspl.exe through usb?
I have one sdcard 2gb, without any class to. With this i have the same problem.
I dont have any error, the loading stucks...
Trough usb i cant because my phone wont sync with pc at all.
TiagoS said:
Trough usb i cant because my phone wont sync with pc at all.
Click to expand...
Click to collapse
it doesnt need to sync.
when you plug the usb cable in, on bootloader, does 'serial' change to 'usb'?
if yes, run hspl4.exe on the PC.
No, it doesnt change from serial to usb.
(many thanks for try helping me samsamuel)
ahh ok, i think my first stop would be try another PC, and maybe usb cable too, see if it detects a usb connection, if not, then its prob the usb socket itself.
I already try that sam. I think problem is with usb port for flashing to much roms, because the usb port stops working when i try charging in a pc. After that doesnt work anymore.
I already try to see the goldcard but i dont understand much well the method.
well if you can find a working winmo mobile to borrow for 5 minutes, or are lucky enough to have a pci based sd card erader available, you can find the unique ID for an sd card, send it to me with an email address, and ill create you a file which you write (in a special way) to the sd card, and it magically allows you to flash any stock rom using leoimg.nbh.
Like a factory back door, if you will.
(Not sure if it works for custom roms, i dont think so)
read
I will borrow my girlfriend's father htc with winmo and i will get the id of one sdcard.
Do you want the RUU_Signed from original htc rom downloaded with my serial yesterday or is not necessary ?
Many thanks in advance.
(can you send me your email in one private message?)
no all i need is the ID and an email address. what you flash is up to you.
One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards
TiagoS said:
One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards
Click to expand...
Click to collapse
sure, no problem. Laptop may work, depends how its connected to teh motherboard inside. Worth a try though eh?
Yes, i will try today.
I will back soon and bring news, bad or good.
HELP
Hi all
i have the same problem with my LEO.
i tried flashing android but failed
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Thanks for your help
martin
killboy said:
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Click to expand...
Click to collapse
are you putting teh phone into bootloader? (coloured stripey screen) cos thats where you should usb flash from, when winmo isnt installed. (Well, actually its ALWAYS best to flash from bootloader, ..)
Related
Please help - this is urgent. I need to get my XDA back to the original ROM. I have the latest ROM upgrade from O2 as a NBF file. I upgraded to PPC2003 and when I try to restore with the latest O2 nbf file I get an error message. I am about to purchase a card reader. Can someone please tell me if it is possible (please dont say I cannot go back!!)
Thanks
Bob :b
Bob,
This is only sugesstion; have you tried to go to O2 UK for their software update? They have ROM 3.17.03 and 4.21 both in exe files. It is alot more simple to run them.
Rgds
I'm in the same situation. I have a MM/SD flash card, and am trying to do the same.
I tried to update the ROM, and now the SX56 is stuck on
"Upgrading, this will take about 5 minutes"
I can't get it to connect to my PC now.
I CAN get into the wallaby bootlaoder (v 5.15)
I've tried to copy a NBF file (and other files) to the MM Card.
Then boot to the bootloader. But then I'm stuck. I don't know how to execute the nbf file on the MM/SD card to re-install the system.
Any ideas?
To restore your PPC2002 back from WM2003, you have to manually reflash it using the Bootloader method
There is an error if you try to use the ROM Update Utility to downgrade to PPC2002
Excelent Information ! ! !
I'm getting close!
I guess my problem is now, is that
I only have a nbf file, and not an nb1 file.
Where can I obtain a nb1 file?
AlexF said:
Excelent Information ! ! !
I'm getting close!
I guess my problem is now, is that
I only have a nbf file, and not an nb1 file.
Where can I obtain a nb1 file?
Click to expand...
Click to collapse
You can write either an nb1 OR an nbf file from XDArit. Make sure you select the correct file-type from the pulldown menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm so close I can smell it.....
But whenever I try to "write it" to the MMCard using XDArit,
I get the message
"Failed to Open device \\.\PhysicalDrive27"
I've even tried another reader, and a different USB ports.
(I have usb1.1 and usb 2.0)
And I can copy files over to the MMCard in Windows.
But it can read it just fine, whenever I extract from the MMCard.
Any Thoughts?
what version of XDArit are you using? if it's 1.2 try using 1.0.....
My version is 1.0.2.0
I am not able to locate another version.
Get xdarit 1.0 from www.yorch.net.
Hope you can get it. If not, I can send it to you, where should I send it to?
Rgds
You all are BRILLIANT ! ! !
Thanks so much! It works perfectly ! ! :lol: :lol: :lol:
Cant continue upgrading in step 4
Hi ,
Anyone please help me i cant continue upgrading my XDA. I try to use adaptrom but the programe only run until step 4 after that show error message "Cant open USB port". I cant upgrade using bootloader because my bootloader gone/ i can't access the bootloader. Please help......
that's because your cradle is connected to a USB hub, connect the cradle to the computer directly and the problem should be solved.
restoring rom
After I had install the new WM 2003 rom, i have so much problem and try to reinstall back the 1.1 edited version.
After a few push here and there, I found out that in the 1.1 rom there is a start (MS-Dos batch file and adapt rom) and this file can help me to reinstall the 1.1 rom back to my XDA unit under windowsXP.
Double click the Adapt rom then start and it will run the update.
Hope this will help others that stuck in the process trying to go back from 2002 rom.
USB HUB ???
I connect directly to my USB Port on my laptop and try use usb cable without cradle still get same problem :twisted: . OCMAX where do you live in malaysia in KL, because now I am in KL. and 3 days ago I went to XDA Service Center in malaysia, i found on XDA website they show me this address around "Bandar Sunway Metro" but they just small shop selling Alcatel Handpone (they distributor from alcatel) this make me diapointed because the didnt do anything. Do you know service center XDA di KL the expert one, please inform me the address
Re: USB HUB ???
lantronix said:
I connect directly to my USB Port on my laptop and try use usb cable without cradle still get same problem :twisted: . OCMAX where do you live in malaysia in KL, because now I am in KL. and 3 days ago I went to XDA Service Center in malaysia, i found on XDA website they show me this address around "Bandar Sunway Metro" but they just small shop selling Alcatel Handpone (they distributor from alcatel) this make me diapointed because the didnt do anything. Do you know service center XDA di KL the expert one, please inform me the address
Click to expand...
Click to collapse
Yes, I'm in KL too. I went to that shop also. It also give me a shock when I first saw that shop, but you need to go up to 1st floor which the O2 repair centre is. but make sure you reinstall all the original OS before you send your unit in. if you had flash the radio rom to 4.21, I think it will be a bit difficult to flash back to the 4.17 original one. I had try flashing this rom back but it always stuck at 1% and it will not go any futher.
I don't know what is the problem with your unit so I really don't know how to help you ?
Tell you a bit of my unit problem. When I first bought the unit I was so happy with it, give me confident that this will be a good buy. but nightmare came after a week.
1st - problem is the contact will not pop out if I press the button.
2nd - problem after I sync with my PC some of the application will not work if I don't do a soft reset.
3rd - Loss of radio signal and can't do any thing unless I do a soft reset.
4th - Sparking sound when I call out or in between a call conversation.
Hey I'm running at clean OS, but the problem still there. So I sent the unit to the sunway repair centre. You know what! they also don't know what to do with my unit. only help me to flash my unit rom and told me that maybe this will help. after I left the shop the problem came back again, that's where I found this XDA-Developers web site that really help me a lot after flashing my unit to the developers v1.1 ( Thks alot guys you are the best ). some of the problem is gone now, but the sparking sound is still there.
Anyway Hope you will find somebody here can help you with your problem. Sorry about my english.
Yes folks... the one you've been waiting for... finally managed to get the patched AMSS to boot... a nice big "up your arse" to Qualcomm.
OK... so, here's the deal... download it, follow the instructions... NO, it won't work for your Kaiser/Artemis/Motorola MR1, so don't ask.
for those of you who are already Hard-SPL (and I mean those of you who didn't manage to completely **** up replugging their USB); you may skip Step 1 by running it, then cancelling the rom update immediately... however, there's really no harm in doing it again, just remember the golden rule:
your PDA *MUST* be in WM and happily synced with the PC BEFORE running each new step.
[SIZE=+2]Download Here[/SIZE]
PS: If you try to sell this, I will find you, kill you, and sell your ****ing testicles on eBay
downloading and testing....post result soon
nice job finally done. enjoy everyone. ill try to help if needed here too.
Downloading and testing too i'm so happy i'll be able to use my Polaris Thanks.
I follow all step skip 1 and all is good my Sfr Polaris can run Orange card thanks, i don't regret my donation
edit: i'm using French Vista Ultimate Sp1 32bit, and i have the bepe WM6 1.28.405.1 FRA 0.57 when i flashed my phone.
good to hear, further feedback appreciated.
thanks m8
hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?
Hi, I'm a french user, just unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro.
Just for your feedback, I'm using Vista SP1 with User Account Control disabled, and that's all. So no scepticism to have with Vista !
Thank you again, phenix11
Thanks you !
But doesn't works on my device with ROM "Polaris WWE_1.28.405.1" (Polaris_FRA_0.58_Full_bepe)
After Step 3, the GUI program has launch on my touch and i have this message :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 1:
I reboot my computer, and launh again SimUnlocker and is working !
Hi
I unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro
Big thanks for your job Olipro!
My Cruise is unlock!
Very greats!!!
woked perfect,3Q
evenmor said:
hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?
Click to expand...
Click to collapse
Hi evenmor,
Download .NET Framework.
Regards,
Frank.
Well done olipro You finaly made it! It looks easier now!
Good job OliPro!
For a brand new SIMlocked (SFR-like ) Cruise, what would you advised?
CID unlock or SIM unlock first... ? The "better faster stronger ... " (Frenchy Daft Punk reference, as SFR may be the most discussed SIM locker ) method?
Thanks
EDIT: as this package doesn't include any "readme" file (only includes exe), could you confirm that it does not require any process before? Is Hard-SPL update already included in this new pack?
Another detail: is there a requirement concerning the introduction (or not) of a SD and/or SIM card before updating ? And Sync or Reset (Hard/Soft) ?
A tuto of "what should be avoided" or example of "what should work" would be greatly appreciated!
If you can confirm that with a new original phone, ie. "without Hard-SPL", "without SD" "without SIM" "without reset" and only a USB sync, it's a good solution that should work, I try this ASAP! Thanks!
I was so excited that I couldn't wait for answers...
I tried this new binary, but my PC crashed/rebooted! please help!
I will try to explain as precisely as possible:
First, my system is Windows XP SP2. I was in "user mode" (not admin).
Then I connected my phone in USB, Sync (Ms Active Sync) and ran the PolarisUnlocker.exe.
Step1: I accept to flash Hard-SPL. I agree, and then the bar is displayed with 0%. My Phone asks for "accept the update" I say "yes". Then, the bar on PC is still at 0% and the PC reboots!!! After that crash, the phone is blocked on what should be the Hard-SPL screen? (a 3 color screen Polaris PFG SPL-1.00.1000 CPLD-2 with Replug USB Cable message at the top).
What should I do?
Please help, I'll do my best to give you all the feedback details.
Thanks.
EDIT: It seems that the only thing I can do now is removing the battery to put the Cruise OFF? Should I do a reset, and how? Any help would be greatly appreciated, I've no more phone (and of course can't sync anymore to apply the process again)!
Optional question (not really important compared to that crash consequences): Do you have an idea of the crash reason?
Does this PolarisUnlocker includes an update of the ROM and Radio part? If yes, it updates the version to a newer one?
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks
Good job Olipro, i dont regret my donation thank you
fab35 said:
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks
Click to expand...
Click to collapse
Just run it again, and don't use such a **** PC.
Finally, it's doneeeeeeeeeeeeeeeeee !!!!!!!!!!
You're the best man Olipro
Many thanks for your hard works and keep up again
Thats great
I have to gift HTC to a friend and i was so worried about the unlocking....thanks gr8 job
Hi folks.
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
The problem is, I keep getting the below error message every time I run the RUU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using:
Windows XP Professional (SP3)
HBOOT drivers installed
HTC Sync uninstalled (registry clean has been carried out)
Correct RRU (UK TMOBILE) downloaded
Phone set to Disk Drive AND Sync (without software on there).
The current ROM is MoDaCo's 2.1 Stock build.
Has anyone else had this problem who can give me a heads up? It's starting to get on my nerves as I just want normal FroYo.
If no one has a solution, can someone provide the stock UK TMOBILE 2.1 Eclair ROM that I can flash with instead?
Thanks in advance,
Mark
Markerton said:
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
Click to expand...
Click to collapse
Flash the RUU for Froyo...instead using 2.1...
Markerton said:
Phone set to Disk Drive AND Sync (without software on there).
Click to expand...
Click to collapse
Phone must be set to "charge only" and enable USB debugging...
gimj01 said:
Flash the RUU for Froyo...instead using 2.1...
Phone must be set to " charge only" and enable USB debugging...
Click to expand...
Click to collapse
USB debugging is activated.
And I'm trying to flash the T-Mobile 2.1 RRU, which is where I get the error.
::EDIT::
When I use the RUU for the unbranded 2.2 then I don't get the above error ... I get error 131 - Customer ID Error.
Bump to the top...
...would really like some help, folks. I know I'm being pushy, rude, and other things, but surely someone's come across this before?!
You don't have to put your phone in disk drive mode...did you check?
I've tried it in Charge Only, Disk Drive and Sync.
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
gimj01 said:
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
Click to expand...
Click to collapse
Please don't take this the wrong way - but if that's the advice you're going to give me after one day then I'd prefer you to not post.
If you could READ my original post, I've tried it on Windows XP Professional (SP3) and Windows 7 Professional (x64).
NEITHER worked.
Sorry...I did'n notice that you tried 2 different systems...I can't find this in your post...
I had the same problem. The RUU installation file did not download completely. Compare the file size on your computer and on the shipped roms website.
I think this will solve your problem.
If you bother to search instead of needlessy bumping your own thread and snapping at people who are trying to help you would of discovered by now that the 131 error code is related to the gold card.
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Markerton said:
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
ive got a similar thread http://forum.xda-developers.com/showthread.php?t=881277 not one damn reponse.. AAAAARRRRGH! ive searched and found a couple of things that dont work would be nice if someone took the time
I hope you can help me with this one.
i have a HTC LEO 512 (NL).
I did the official rom update true the website of HTC NL and that went wrong by upgrading. Now the phone will not exept any Radio, ROM or MAGDLR or what so ever. The HTC logo looks disorderd (white stripes true it) and in de bootloader screen there is no PB81100 but a strange sign and a S.
I tried to use an other battery but no succes.
I didn't try the goldcard method because i don't have the resources en knowledge for it.
However i tried Task28, Task38, Task 2a, Task29 with MTTY and Task29 with new rom from SD card. But it doesn't go any further. I don't know about the kaiser trick maybe that, or goldcard is an idea? or do you have some commands for MTTY for me?
What I CAN do is HSPL4 the phone to any version i want with success ( spl 2.08, hspl 2.08, spl 3.03, hspl 3.03, spl 1.66, hspl1.66, spl 1.42 etc.)
I tried a lot of roms allready. When i use a dutch (NL) one its getting the error afther 1%. When i use a uk or Tmous rom its getting the error by 4%. I'm not able to install Magdlr to test if boot Android from SD method works.
I have an attachment (7z or zip) with important information in it. There is a export of the MTTY commands i did with all the info of the phone itself and some pictures of the error and the very strange sign in the bootloader. (ITS JUST 800kb). I will attach the file within a few ours to this topic.
I hope you guys can help me.
Of course there is a reward for it when its fixed to buy a couple of coffee's or anything else
Is this what your HD2 looks like?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If these images mach your HD2 then your device I.D. has gotten screwed up from flashing the ROM you flashed. Please post the full ROM name you flashed. Also did you enter your SN into the HTC site to confirm the ROM was for your HD2? I am not sure if it is a way to reset your device I.D. without JTAG. But I am going to send some messages to a couple of people I know and possible make a call to my buddy that works at the local Cell Phone Repair shop to see what I can find out for you as I want to know if you can do it too. Cause you are the second person in a week that I have seen with this problem
Yes that's the one! the one with the bootloader looks a like mine but with other strings. How can we fix this?
Many thanx in advance!!! Your great!
I hope there is a mather with goldcard of MTTY mode.
I have 2 HTC hd2 the other one had Bad blocks and don't know how to fix that problem. (there was a litlle bit of water damage in the speaker).
Even boot android from SD in Magdlr doesn't work on that one. I can install magdrl, all roms, all radio's on it. but cannot install system partions (157mb or so) or install rom by CWM or DAF.
maybe also a try with PSAS / REVSKILS goldcard or so to don't use that blocks anymore or something? I will make an other question thread for that.
phantomboy said:
Yes that's the one! the one with the bootloader looks a like mine but with other strings. How can we fix this?
Many thanx in advance!!! Your great!
I hope there is a mather with goldcard of MTTY mode.
I have 2 HTC hd2 the other one had Bad blocks and don't know how to fix that problem. (there was a litlle bit of water damage in the speaker).
Even boot android from SD in Magdlr doesn't work on that one. I can install magdrl, all roms, all radio's on it. but cannot install system partions (157mb or so) or install rom by CWM or DAF.
maybe also a try with PSAS / REVSKILS goldcard or so to don't use that blocks anymore or something? I will make an other question thread for that.
Click to expand...
Click to collapse
I have not heard back from any of my contacts yet but a gold card might help you out here. Seeing as you have two HD2s then you can use the other one to make a gold card, or at least I think you can. Biut I am not 100% sure a gold card will work but it is worth a try.
can you check the attachment? that are some photo's of the errors and a MTTY export
phantomboy said:
can you check the attachment? that are some photo's of the errors and a MTTY export
Click to expand...
Click to collapse
I did check out your zip file and I think your device I.D. is definitly your problem. Also sorry it taken me a while to post back here too. I finally got a reply from my buddy that I e-mailed. He told me that yes inded when you flash with a goldcard it gives the device a GOLD ID 11111111 so it can flash nomatter what. He told me the only thing that will keep a gold card from sucessfully flashing is if you have physical NAND damage or other hardware problems. So typ in "How to make a gold card for HTC HD2" into google and you should find a couple of links to one or two guides here on XDA on how to make one. I would leave some links for you but I am posting on my phone and it sucks trying to post links on my phone.
I have the same problem .
Did you fix it ?
Thanks !
No still no solution
PLEASE can someone help me? I tried HSPL 2.08, 3.03, 1.42 and 3 soft SPL's
radio does not work and Goldcard method also does not seem to do the trick.
The LEO is not fallen down or has no water damage!
can someone help us?
JTAG is your only possible solution. All other methods rely on a valid deviceID, even goldcard.
What is JTAG? Is someone in NL or Germany who can do this for me?
Who can help me/us with this?
To who can I go with this phone within 75km? or Send it to?
I life in Limburg (south of holland).
EDIT - let me just add a quick caveat here, , , my last post was pretty direct, , there may be some other option, and/or JTAG may not work, i've never used it, , i'm only basing my reply on 18 months hard reading on here, seeing the same issue several times before, and not having seen any solution ... and i'd hate for you to spend money on jtag and for it not to work.
that being said, if you're prepared to post it, send T'macgnolia a PM, i see him saying that he knows someone who offers the service quite often.
Hi to all i'm new to HD2 so be nice I have a friends HD2 that is stuck on HTC's logo. When i get to bootloader it gave me "serial" and i cannot connect to the device. Can some one help how to install a stock ROM ot this "thing"?
visit this link please...
but first donwload stock rom from htc with phone serial number.
[TUT] Flash your ROM / Radio via microSD
pockobg said:
Hi to all i'm new to HD2 so be nice I have a friends HD2 that is stuck on HTC's logo. When i get to bootloader it gave me "serial" and i cannot connect to the device. Can some one help how to install a stock ROM ot this "thing"?
Click to expand...
Click to collapse
make sure you got the the windows drivers installed
ubejd said:
visit this link please...
but first donwload stock rom from htc with phone serial number.
[TUT] Flash your ROM / Radio via microSD
Click to expand...
Click to collapse
when i try to download an official ROM from http://www.htc.com/europe/SupportDownload.aspx?p_id=297&cat=2&dl_id=1043 it says "Sorry, this software download is not suitable for your device.".
So where can i download stock ROM, and how can i understand wich is for my HD2?
pockobg said:
So where can i download stock ROM, and how can i understand wich is for my HD2?
Click to expand...
Click to collapse
Where's the phone from? Is it a contract phone or bought unbranded? What country?
Go to htc.com, select the country the phone is from, choose support, downloads, filter the list for rom updates, if the phone was contract look for a rom with that network in the name, if not try the rom with HTC in the name. If serial isn't accepted you made a mistake.
There are exceptions, cos some countries must sell phones unlocked, so a contract phone will still take the unbranded rom. Get the country right and start trying downloads till you get serial accepted.
I''ve found the ROM it was from Greece and followed this:
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card. DONE
2. Remove the battery cover and press the Reset button.DONE
3. Hold the Volume Down and End Call (power) buttons at the same time.DONE
4. As soon as "Searching..." appears on the screen, release the Volume Down button. Searching is not showing
It shows this and that is it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cards bigger than 4gig often don't work.
samsamuel said:
Cards bigger than 4gig often don't work.
Click to expand...
Click to collapse
Im using 2Gb brand new and formated in FAT32
In that case it must be the leoimg.nbh, extract it again. (not just renaming the .exe are you? Wouldn't be the first)
samsamuel said:
In that case it must be the leoimg.nbh, extract it again. (not just renaming the .exe are you? Wouldn't be the first)
Click to expand...
Click to collapse
I have extracted the nbh file and renamed it to LEOIMG.nbh yes! tonight i"ll try leoimg.nbh ...
pockobg said:
Hi to all i'm new to HD2 so be nice I have a friends HD2 that is stuck on HTC's logo. When i get to bootloader it gave me "serial" and i cannot connect to the device. Can some one help how to install a stock ROM ot this "thing"?
Click to expand...
Click to collapse
Hi,
The "serial" should change to "USB".
The main reason this is NOT happening,is when your pc/laptop is missing certain drivers.
These are obtained from Activesync in XP,and WMDC in Windows 7.
Make sure you have the lastest versions,and try again.
pockobg said:
Im using 2Gb brand new and formated in FAT32
Click to expand...
Click to collapse
4k (4096) alocation size? probably shouldnt matter, but worth checking everything, and since we are checking basics, do a full format, not a quick format.
malybru said:
Hi,
The "serial" should change to "USB".
The main reason this is NOT happening,is when your pc/laptop is missing certain drivers.
These are obtained from Activesync in XP,and WMDC in Windows 7.
Make sure you have the lastest versions,and try again.
Click to expand...
Click to collapse
It did change to USB i don"t know why it did not happened last time. But now how can i push the img?
pockobg said:
It did change to USB i don"t know why it did not happened last time. But now how can i push the img?
Click to expand...
Click to collapse
Hi,
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.exe
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there
If the leoimg.nbh is on the root of your sd card,it will start itself.
Just follow the onscreen instructions.
OK so i got somewhere :
But i"m stuck here for about 20min now ..... and nothing
does you phone got hot during update... try this: take out battery, sim card, memory card and put in fridge for 5-10 min - first put phone in a bag to protect for water, and then immediately try updating again.
post results
ubejd said:
does you phone got hot during update... try this: take out battery, sim card, memory card and put in fridge for 5-10 min - first put phone in a bag to protect for water, and then immediately try updating again.
post results
Click to expand...
Click to collapse
It really gets a little hot. And i"ve noticed that when i remove the battery and put it back, connect the charger and light LED turns on but the phone never charges to full .... if it has something to do with the reflash
I"ll try this tonight