Database Users

Help and advice with CID and Artemis Touch 3.01

Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,

Is it Vsita system?
Anthony2oo5 said:
Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,
Click to expand...
Click to collapse

No windows XP pro, service pack 2. With all the updates up to today and im logged in as administrator.
Sorry for not adding this and thanks for your reply.

have you deleted any sync'd devices and then plugged your phone in, then when active sync finds the device just press cancel so that it adds the device as guest. this worked for me!

No I didnt do that but I seemed to have got it to work.
I used a different machine which had just been formatted with windows XP service pack 2 and because this software is old, I downloaded activsync 4.2 onto that machine and it worked first go.
Another problem im having which is on both machines now. When I run the RUU, it gets the image version of my phone, but it says upgrade to image version 1.000000 see below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happened on version 3.0 and 3.01 from multiple download sources. If you continue it gets to 3% and stops saying file is currupt.
Any help ?
Thanks for everyone who offered help.

Put cert_SPCS and EnableRapi on storage card>zip, then install them.
Then try to flash another time.

Missing...
1. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone
2. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND
if there's a popup asking you to allow installation select YES
3. SoftReset your device

Ok finally i got it to work.
I used the other machine that managed to run the application properly. After that process had finished, i started step 2 straight away een though the screen of my phone was white. this worked with no problems. Last time I was restarting the phone to get rid of the white screen.
Never used the above method by coccobabbo, but could you explain it to me ? What are those applications ?
Will use that next time a new ROM comes out.
Thanks again everyone.

Anthony: That's basically the same as flashing USPL from the PC, but without a PC. You can also call it "Vista solution"

You are subscribed to this thread Imate JasJar Enterin Bootloader mode.Turnon fail

Hello Everyone,
I am not a professional or anything i am just a student.So kindly when you use the terminology make sure its understandable for a person with less knowledge about unlocking and stuff.
Ok here goes my problem, Its an I-mate Jasjar and its not turning on when i press the Power button. It shows USB on top and V1.00 when entering Bootloader mode. I dont know what am i suppose to do after that as i ran into a professional guy on msn and he showed me how to get into bootloader mode and he is too busy to help me out so i am here.
What i did was Its battery was low and i tried to Hard Reset it and now it wont turn on.
So any help is much appreciated

instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

chasmanian said:
instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Click to expand...
Click to collapse
Well said!
In the Wiki you can find a lot of usefull help!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the Error i am getting when i followed Method 2 .
Kindly tell me what am i doing wrong i already Unchecked the USB connection in ActiveSync ....Whatelse am i suppose to do...please guys i really love this phone and cant wait to use it again.
Thanks.
ZODI.

hi ZODI,
you better kill the ActiveSync all together by using windows tak manager. I mean to kill the process called wcescom.exe on your PC.
Then reconnect your UNIVERSAL.
Wait a bit, then have a look in PC's Device Manager, if your UNIVERSAL was recognised and it should be listed within USB devices as HTC USB Sync or similar.
If so, then do a reflash one more time.
good luck
buzz

Hi ZODI,
you'd better kill ActiveSync all the way down, by using windows task manager.
- disconnect your UNIVERSAL
- kill wcescomm.exe process on your PC
- connect your UNI again and wait a bit
- check if display shows USB at the top of the screen
- in PC's Device Manager check, if the device driver (HTC USB Sync) was loaded
If all done, proceed and do a ROM REFLASH.
If not, you may also check at http://buzzdev.net/list.php?40 mainly those two sticky posts at the top.
good luck
buzz

Ok giving it a try ....hope it works this time and thanks.

ZODI said:
Ok giving it a try ....hope it works this time and thanks.
Click to expand...
Click to collapse
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt reboot.

ZODI said:
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt boot.
Click to expand...
Click to collapse
I think i am gonna have find a Service centre and spend huge amount of my pocket money in just getting my phone to work

OMG .... i DID IT !!!!!!!!!!!! omg thanks guys i love you all
Love ya buzz from the bottom of my heart THANKS BRO !!!! and each and everyone of ya <3

IPL or SPL 3.08 failed formatting the partition RECOVERY

I am a great FAN of this section as I have flashed almost every WM6 or WM6.1 ROM into my charmer....
But the problem came the last month when I had a fialed Flashing of the ROM resulting in the hanging problem at the T-mobile Boot screen with IPL 3.08 and SPL 3.08!!!
As I have read almost every thread and discovered that a lot of others are facing the same problem wthout any satisfactory solution.....(Reason: on hard reset it says formatting failed!!!)
Infact the only story of recovery was from dorfdisko
dorfdisko said:
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
hey, now my battery is full charged an the ruu starts patching but at 95% ist says:
This NBF File cannot be used for your PDA Phone. Please check NBF File.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used this one:
RUU_Prophet_220734_2207114_024721_NVID
i tried also:
Prophet_G3_G4_RadioRom_v2.69.21
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
but no succeed
what should i try now?
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
Click to expand...
Click to collapse
But for me I could not get through this grim situation with the same result shown above error at 95%......
So I would like to request all the developers (especially dorfdisko the only lucky person coming out of this situation using the PROPHET ROM in someway!) to look into the matter systematically and develope some solution in the form of specially cooked ROM or something like this!!!
Thanks in anticipation on my behalh and others who are caught up in similar situation!!!

Have you tried http://forum.xda-developers.com/showthread.php?t=471490 ?
You can also try to flash the latest German ROM. (I do that with the English one when something fails.)
That may only work with the NoID RUU from the link above. It can work because the IPL and SPL of a German ROM have got other extended code numbers also they are the same version. They will overwrite the old ones and maybe that works.
I can upload the nk.nbf later for you.

Yes please!
It would be an aweful kind of you!!!

Here is the needed German nk.nbf. Use only with NoID RUU!
http://rapidshare.com/files/217609597/nk.nbf
Hope this works for you.

Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.

ChrBeck said:
Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.
Click to expand...
Click to collapse
Sorry I was busy somewhere else so could not found time for testing this procedure!!!
Would tell you soon about the said matter!!!

Thanks for that
EDIT
I've seen that you opened a thread before and I replied there too. Not very nice to open a new one. And next time tell us that you opened a thread before. That will help us much.
Thanks
END OF EDIT

Sorry for that issue!!!
And as regards your ROM file it didnt work either.
As the phone hangs again on the splash screen and on hard resetting it says format failed as ususal!!!
Now what can be done?

You may can't flash the File with the NoID ruu because your device isn't CDI unlocked. I'll search and maybe tell you things later.

The file was flased to the end but then that was the result as I described above!
Anyway thanks for your painstaking!!!

Yes. It looks like flashed to the end. But the bootloader rejects everything and nothing will change. You can only flash with the original Utility with fitting code. Nothing else. Believe me it got never flashed.
And I've got an other idea:
You can format the Charmer over TTY. But I don't know about funktion in bootloader mode. And I would not recomend you to try it on your own. Maybe Vlodeck reads the thread. He should know more about it. Otherwise I can ask in Wizard forum for you.

OK I have a idea now. You can try with MTTY and I can tell you how.
First you need MTTY: http://wiki.xda-developers.com/uploads/mtty.exe
You need to have a full battery. (Otherwise you can power your phone with a AC adaptor with 3 4.5 or 5 volt. I can tell you the pin layout)
Put your device in bootloader mode (Press Camera while reseting).
Connect it to USB.
Start MTTY and choose USB.
Wait untill it is connected to the phone.
First type in task 32 and hit enter....Wait for feedback.
Then type task 28 and hit enter....Wait for feedback.
Now start a original ROM upgrade and let it run till the end.
Warning: Never restart your phone untill the Flashing is finished. Restarting the phone will kill your device completly.
If there are errors with the comands, for example Invalid comand please write me. I'll tell you what to do then.

i have the same problem with ipl & spl 3.08
this last solution doesn`t work.
do you have another idea?

What feedback do you get after you typed the comands?

this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h

OK. That was clear. The comands won't work in Cmd> Mode. You need to get in USB> Mode. But I don't know how to do that so I can't do anything at the moment.

adrianoND said:
this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h
Click to expand...
Click to collapse
Command wrong, need >set 32< and format all or format EXTROM, but you need Gold Card created QMAT programm and worked WM Phone to create GoldCard.

Problems unrooting...

Hi folks.
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
The problem is, I keep getting the below error message every time I run the RUU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using:
Windows XP Professional (SP3)
HBOOT drivers installed
HTC Sync uninstalled (registry clean has been carried out)
Correct RRU (UK TMOBILE) downloaded
Phone set to Disk Drive AND Sync (without software on there).
The current ROM is MoDaCo's 2.1 Stock build.
Has anyone else had this problem who can give me a heads up? It's starting to get on my nerves as I just want normal FroYo.
If no one has a solution, can someone provide the stock UK TMOBILE 2.1 Eclair ROM that I can flash with instead?
Thanks in advance,
Mark

Markerton said:
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
Click to expand...
Click to collapse
Flash the RUU for Froyo...instead using 2.1...
Markerton said:
Phone set to Disk Drive AND Sync (without software on there).
Click to expand...
Click to collapse
Phone must be set to "charge only" and enable USB debugging...

gimj01 said:
Flash the RUU for Froyo...instead using 2.1...
Phone must be set to " charge only" and enable USB debugging...
Click to expand...
Click to collapse
USB debugging is activated.
And I'm trying to flash the T-Mobile 2.1 RRU, which is where I get the error.
::EDIT::
When I use the RUU for the unbranded 2.2 then I don't get the above error ... I get error 131 - Customer ID Error.

Bump to the top...
...would really like some help, folks. I know I'm being pushy, rude, and other things, but surely someone's come across this before?!

You don't have to put your phone in disk drive mode...did you check?

I've tried it in Charge Only, Disk Drive and Sync.

It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...

gimj01 said:
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
Click to expand...
Click to collapse
Please don't take this the wrong way - but if that's the advice you're going to give me after one day then I'd prefer you to not post.
If you could READ my original post, I've tried it on Windows XP Professional (SP3) and Windows 7 Professional (x64).
NEITHER worked.

Sorry...I did'n notice that you tried 2 different systems...I can't find this in your post...

I had the same problem. The RUU installation file did not download completely. Compare the file size on your computer and on the shipped roms website.
I think this will solve your problem.

If you bother to search instead of needlessy bumping your own thread and snapping at people who are trying to help you would of discovered by now that the 131 error code is related to the gold card.

Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App

Markerton said:
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
ive got a similar thread http://forum.xda-developers.com/showthread.php?t=881277 not one damn reponse.. AAAAARRRRGH! ive searched and found a couple of things that dont work would be nice if someone took the time

[TOOL] Advanced ROM Update Utility for HTC 7 Mozart by Barin (asusmobile.ru)

I post this on behalf of Barin (the author of the utility).
DOWNLOAD:
MozartAdvancedRUU 1.0.3
1. Possibility to choose one from several NBH files. Files should be placed in one folder with utility.
2. Possibility to choose the way (option) of flashing
3. Possibility to get NBH file info (Modification date, Model ID, CID, Version, Lang, Chunk size)
Regular RUU (Task 28)
Hard Reset is performed straight after flashing automatically (good for NBH containing OS section)
Custom RUU (Task 00)
to install only radio roms without performing hard-reset.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remeber as always:
Unskilled interference to your phone's OS can totally crash your device.
If you understand what are you going to do - go ahead.
No warranty.... use on your own risk.
Requirements:
RSPL
Net Framework 3.5
Changelog:
-v1.03 (06.11.11 - task 00 enabled - X downloads)
-v1.02 (02.11.11 - initial release - 249 downloads)
Other great tools by Barin:
OS Builder (WM Kitchen)
OS Builder 7 (WP7 Kitchen)
LEO Advanced ROM Update Utility
Titan Advanced ROM Update Utility
Blackstone Advanced ROM Update Utility
Topaz Advanced ROM Update Utility
Kovsky Advanced ROM Update Utility
HTC Splash Tool
My projects:
HD2O ROM Series
X1O ROM Series
HTC HD2 stock ROM overview thread
Latest Opera 9.70 thread
HD2 WP7 donation fund for da_g
HD2 haret/linux/android donation fund for devs (cotulla, dcordes, markinus, letama, netripper)
HD2 6.5.3 global bold font fix (by ultrashot)
HD2Owner's youtube channel

Thank you for support and publishing, my friend!

thank you for all the work you do sir..

Yes!!!! Asusmobile Team it's cool

-=Barin=- said:
Thank you for support and publishing, my friend!
Click to expand...
Click to collapse
You did it again my friend. Hope to be cooking 7 Mozart soon.
TQ

dose it help in flashing boot loader 4.xxxx or not
pls whoever knows any clear procedure to flash my mozart boot loader 4.xxxx
pls help
tnx

illi said:
You did it again my friend. Hope to be cooking 7 Mozart soon.
TQ
Click to expand...
Click to collapse
Dude, WP7 KITCHEN - OS Builder V1.3.187 FULL (03.11.2011) is published. Barin, ultrashot, feropont, me and other asusmobile staff - are now cooking for Mozart with it.
Rhiff, buddy, edit you post to add one more great tool by Barin.

Hi,
I am wondering whether this application allows the flashing of all the updates inside a package besides the operating system.
In my case, I do not want to reflash the operating system part and lose all my data - but I would like to do an update for the radio rom (and there's a radiocust too, can you tell me, what it is?)
For some reason, I can not select Task 28 or Task 32, both select boxes are grayed out.
How can I prevent a Task 28 from happening?
Thanks for answering!

Updated version is ready.
Custom mode is enabled (Task 00)

didn't work for me, how i can use this tool?

Bad Tiger said:
didn't work for me, how i can use this tool?
Click to expand...
Click to collapse
Read about requirements in the first post

HD2owner, slightly out of topic, I've been struggling in order to downgrade my SPL, which is of Orange Switzerland (071), with bootloader 4.60.
Any clue where I can find the correct .nbh file for that?
Thanks!

i know im about a year and a half late but thanks anyways!

can I use this tool to flash these radio? http://forum.xda-developers.com/showthread.php?t=1287062&highlight=radio
i noticed that the radio packages have their own ROm update utility. Can I just strip the radio file and load it using this advanced tool?

iamwin said:
can I use this tool to flash these radio?
Click to expand...
Click to collapse
yep

Question
Hello!
I've tried to use this tool, but an error stops me always...
My computer (and the program) cannot recognize my phone, and on my phone, there is no "USB" sign. There is no connection between my phone and the progam. I tried few cables, few USB-ports (I have two ), but nothing at all, it have to be a driver problem. I have a Mozart and a Windows 7 running on a MacBook Air (separately with BootCamp, not virtually).
Can you please help me, where can I get the necessary drivers from?
I've tried all the advices I found on Google, but it didn't help.
Thank you in advance

PsYtiB said:
Hello!
I've tried to use this tool, but an error stops me always...
My computer (and the program) cannot recognize my phone, and on my phone, there is no "USB" sign. There is no connection between my phone and the progam. I tried few cables, few USB-ports (I have two ), but nothing at all, it have to be a driver problem. I have a Mozart and a Windows 7 running on a MacBook Air (separately with BootCamp, not virtually).
Can you please help me, where can I get the necessary drivers from?
I've tried all the advices I found on Google, but it didn't help.
Thank you in advance
Click to expand...
Click to collapse
please install drivers first (download WINDOWS MOBILE DEVICE CENTER FOR WIN7).

iamwin said:
please install drivers first (download WINDOWS MOBILE DEVICE CENTER FOR WIN7).
Click to expand...
Click to collapse
I already tried everything, it just not recognizes my phone.
The WMDC says: no connection, if I try to download the drivers through Windows Update, it is not successful...that is why I want to ask somebody kindly to zip me those drivers if it's possible...thank you

You should put your phone in bootloader mode... While shuting down keep Vol down pressed until you see tricolor screen

rikee said:
You should put your phone in bootloader mode... While shuting down keep Vol down pressed until you see tricolor screen
Click to expand...
Click to collapse
Okay, thank you for trying to help me, but I'm not a newbie, I red all the related posts, did all the advices... I was rooting and customizing Android devices before so believe me, I can put my phone into SPL mode...I just need that drivers...maybe I try on another computer, I have a clue that the problem is the 64-bit OS...