Database Users

Polaris SIM Unlocker & Hard-SPL

Yes folks... the one you've been waiting for... finally managed to get the patched AMSS to boot... a nice big "up your arse" to Qualcomm.
OK... so, here's the deal... download it, follow the instructions... NO, it won't work for your Kaiser/Artemis/Motorola MR1, so don't ask.
for those of you who are already Hard-SPL (and I mean those of you who didn't manage to completely **** up replugging their USB); you may skip Step 1 by running it, then cancelling the rom update immediately... however, there's really no harm in doing it again, just remember the golden rule:
your PDA *MUST* be in WM and happily synced with the PC BEFORE running each new step.
[SIZE=+2]Download Here[/SIZE]
PS: If you try to sell this, I will find you, kill you, and sell your ****ing testicles on eBay

downloading and testing....post result soon

nice job finally done. enjoy everyone. ill try to help if needed here too.

Downloading and testing too i'm so happy i'll be able to use my Polaris Thanks.
I follow all step skip 1 and all is good my Sfr Polaris can run Orange card thanks, i don't regret my donation
edit: i'm using French Vista Ultimate Sp1 32bit, and i have the bepe WM6 1.28.405.1 FRA 0.57 when i flashed my phone.

good to hear, further feedback appreciated.

thanks m8

hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?

Hi, I'm a french user, just unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro.
Just for your feedback, I'm using Vista SP1 with User Account Control disabled, and that's all. So no scepticism to have with Vista !
Thank you again, phenix11

Thanks you !
But doesn't works on my device with ROM "Polaris WWE_1.28.405.1" (Polaris_FRA_0.58_Full_bepe)
After Step 3, the GUI program has launch on my touch and i have this message :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 1:
I reboot my computer, and launh again SimUnlocker and is working !

Hi
I unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro

Big thanks for your job Olipro!
My Cruise is unlock!
Very greats!!!

woked perfect,3Q

evenmor said:
hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?
Click to expand...
Click to collapse
Hi evenmor,
Download .NET Framework.
Regards,
Frank.

Well done olipro You finaly made it! It looks easier now!

Good job OliPro!
For a brand new SIMlocked (SFR-like ) Cruise, what would you advised?
CID unlock or SIM unlock first... ? The "better faster stronger ... " (Frenchy Daft Punk reference, as SFR may be the most discussed SIM locker ) method?
Thanks
EDIT: as this package doesn't include any "readme" file (only includes exe), could you confirm that it does not require any process before? Is Hard-SPL update already included in this new pack?
Another detail: is there a requirement concerning the introduction (or not) of a SD and/or SIM card before updating ? And Sync or Reset (Hard/Soft) ?
A tuto of "what should be avoided" or example of "what should work" would be greatly appreciated!
If you can confirm that with a new original phone, ie. "without Hard-SPL", "without SD" "without SIM" "without reset" and only a USB sync, it's a good solution that should work, I try this ASAP! Thanks!

I was so excited that I couldn't wait for answers...
I tried this new binary, but my PC crashed/rebooted! please help!
I will try to explain as precisely as possible:
First, my system is Windows XP SP2. I was in "user mode" (not admin).
Then I connected my phone in USB, Sync (Ms Active Sync) and ran the PolarisUnlocker.exe.
Step1: I accept to flash Hard-SPL. I agree, and then the bar is displayed with 0%. My Phone asks for "accept the update" I say "yes". Then, the bar on PC is still at 0% and the PC reboots!!! After that crash, the phone is blocked on what should be the Hard-SPL screen? (a 3 color screen Polaris PFG SPL-1.00.1000 CPLD-2 with Replug USB Cable message at the top).
What should I do?
Please help, I'll do my best to give you all the feedback details.
Thanks.
EDIT: It seems that the only thing I can do now is removing the battery to put the Cruise OFF? Should I do a reset, and how? Any help would be greatly appreciated, I've no more phone (and of course can't sync anymore to apply the process again)!
Optional question (not really important compared to that crash consequences): Do you have an idea of the crash reason?
Does this PolarisUnlocker includes an update of the ROM and Radio part? If yes, it updates the version to a newer one?
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks

Good job Olipro, i dont regret my donation thank you

fab35 said:
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks
Click to expand...
Click to collapse
Just run it again, and don't use such a **** PC.

Finally, it's doneeeeeeeeeeeeeeeeee !!!!!!!!!!
You're the best man Olipro
Many thanks for your hard works and keep up again

Thats great
I have to gift HTC to a friend and i was so worried about the unlocking....thanks gr8 job

IPL or SPL 3.08 failed formatting the partition RECOVERY

I am a great FAN of this section as I have flashed almost every WM6 or WM6.1 ROM into my charmer....
But the problem came the last month when I had a fialed Flashing of the ROM resulting in the hanging problem at the T-mobile Boot screen with IPL 3.08 and SPL 3.08!!!
As I have read almost every thread and discovered that a lot of others are facing the same problem wthout any satisfactory solution.....(Reason: on hard reset it says formatting failed!!!)
Infact the only story of recovery was from dorfdisko
dorfdisko said:
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
hey, now my battery is full charged an the ruu starts patching but at 95% ist says:
This NBF File cannot be used for your PDA Phone. Please check NBF File.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used this one:
RUU_Prophet_220734_2207114_024721_NVID
i tried also:
Prophet_G3_G4_RadioRom_v2.69.21
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
but no succeed
what should i try now?
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
Click to expand...
Click to collapse
But for me I could not get through this grim situation with the same result shown above error at 95%......
So I would like to request all the developers (especially dorfdisko the only lucky person coming out of this situation using the PROPHET ROM in someway!) to look into the matter systematically and develope some solution in the form of specially cooked ROM or something like this!!!
Thanks in anticipation on my behalh and others who are caught up in similar situation!!!

Have you tried http://forum.xda-developers.com/showthread.php?t=471490 ?
You can also try to flash the latest German ROM. (I do that with the English one when something fails.)
That may only work with the NoID RUU from the link above. It can work because the IPL and SPL of a German ROM have got other extended code numbers also they are the same version. They will overwrite the old ones and maybe that works.
I can upload the nk.nbf later for you.

Yes please!
It would be an aweful kind of you!!!

Here is the needed German nk.nbf. Use only with NoID RUU!
http://rapidshare.com/files/217609597/nk.nbf
Hope this works for you.

Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.

ChrBeck said:
Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.
Click to expand...
Click to collapse
Sorry I was busy somewhere else so could not found time for testing this procedure!!!
Would tell you soon about the said matter!!!

Thanks for that
EDIT
I've seen that you opened a thread before and I replied there too. Not very nice to open a new one. And next time tell us that you opened a thread before. That will help us much.
Thanks
END OF EDIT

Sorry for that issue!!!
And as regards your ROM file it didnt work either.
As the phone hangs again on the splash screen and on hard resetting it says format failed as ususal!!!
Now what can be done?

You may can't flash the File with the NoID ruu because your device isn't CDI unlocked. I'll search and maybe tell you things later.

The file was flased to the end but then that was the result as I described above!
Anyway thanks for your painstaking!!!

Yes. It looks like flashed to the end. But the bootloader rejects everything and nothing will change. You can only flash with the original Utility with fitting code. Nothing else. Believe me it got never flashed.
And I've got an other idea:
You can format the Charmer over TTY. But I don't know about funktion in bootloader mode. And I would not recomend you to try it on your own. Maybe Vlodeck reads the thread. He should know more about it. Otherwise I can ask in Wizard forum for you.

OK I have a idea now. You can try with MTTY and I can tell you how.
First you need MTTY: http://wiki.xda-developers.com/uploads/mtty.exe
You need to have a full battery. (Otherwise you can power your phone with a AC adaptor with 3 4.5 or 5 volt. I can tell you the pin layout)
Put your device in bootloader mode (Press Camera while reseting).
Connect it to USB.
Start MTTY and choose USB.
Wait untill it is connected to the phone.
First type in task 32 and hit enter....Wait for feedback.
Then type task 28 and hit enter....Wait for feedback.
Now start a original ROM upgrade and let it run till the end.
Warning: Never restart your phone untill the Flashing is finished. Restarting the phone will kill your device completly.
If there are errors with the comands, for example Invalid comand please write me. I'll tell you what to do then.

i have the same problem with ipl & spl 3.08
this last solution doesn`t work.
do you have another idea?

What feedback do you get after you typed the comands?

this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h

OK. That was clear. The comands won't work in Cmd> Mode. You need to get in USB> Mode. But I don't know how to do that so I can't do anything at the moment.

adrianoND said:
this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h
Click to expand...
Click to collapse
Command wrong, need >set 32< and format all or format EXTROM, but you need Gold Card created QMAT programm and worked WM Phone to create GoldCard.

[Break News!]To Flash HSPL1024 @ ModelID PB81*** TMOUS

It's the way to flash HSPL_1024 @ TMOUS LEO which modelID is PB81***
The TMOUS with PB81*** ModelID could not flash HSPL1024 by the tool once,but now I work out a solution to flash it!!!
First,download the HSPL_1024.exe....
Second,creat a new file at c:\ The file name is ModelIDCheckBypass.txt
Third,edit the txt file,type PB811200 in it and save.
Fourth,set the txt file as read-only.
Now.....run the HSPL_1024.exe to flash HSPL and enjoy custom ROMs!!!

bgcfb said:
It's the way to flash HSPL_1024 @ TMOUS LEO which modelID is PB81***
The TMOUS with PB81*** ModelID could not flash HSPL1024 by the tool once,but now I work out a solution to flash it!!!
First,download the HSPL_1024.exe....
Second,creat a new file at c:\ The file name is ModelIDCheckBypass.txt
Third,edit the txt file,type PB811200 in it and save.
Fourth,set the txt file as read-only.
Now.....run the HSPL_1024.exe to flash HSPL and enjoy custom ROMs!!!
Click to expand...
Click to collapse
wow too much work but good discover even though i didnt have to go through that because i use hspl2.exe it didnt work i got the error but i tried the hspl1024 and it work no problem it ask me do u see the i hack it on the phone and it did it no problem thankx for ur hard work could be useful

jose-n-liany08 said:
wow too much work but good discover even though i didnt have to go through that because i use hspl2.exe it didnt work i got the error but i tried the hspl1024 and it work no problem it ask me do u see the i hack it on the phone and it did it no problem thankx for ur hard work could be useful
Click to expand...
Click to collapse
i dont think your model id is exactly ''PB81***'', with the stars.
I suspect in bootloadwer your model id is 'PB81120'
Several people have a tmous with *** as part of their model id, and hspl1024 doesnt work for them,. so this will be a real bonus for them.

samsamuel said:
i dont think your model id is exactly ''PB81***'', with the stars.
I suspect in bootloadwer your model id is 'PB81120'
Several people have a tmous with *** as part of their model id, and hspl1024 doesnt work for them,. so this will be a real bonus for them.
Click to expand...
Click to collapse
Very nice work!
Has anyone tried the HSPL2 version for the US model that had bad model ID's or was this just the HSPL (one) version we are speaking of?

It WORKED for me!
Security Unlocked
PB81*** SS-BC
SPL-2.08.0000 8G XC
MicroP(LED) 0x02
MicroP(TOuch) 0x10
512MB flash, using the HSLP_1024RUN.
Thanks!

this method is also working for the telstra users in regular hd2 section. Good job bgcfb

THANKS!
The original posted tutorial didn't work for me, but this solved my problem. Thanks for the extra help!

samsamuel said:
this method is also working for the telstra users in regular hd2 section. Good job bgcfb
Click to expand...
Click to collapse
I tried it for nearly 2 month,finally,I found this solution and hope it could work for people! It's my render to all people~

where do i download the hspl 1024? searched but can't find. also, where do you put the text file after creating it?

phantast1c said:
where do i download the hspl 1024? searched but can't find. also, where do you put the text file after creating it?
Click to expand...
Click to collapse
use hspl 3 which now supports all models, all spl. See my sig

it does not work with my hd2 spl-2.02.0000 XE PB811200
i always got Bad SPL error after following the instructions
is there some pre-requisite or things need to be done first before following the instructions on the first post?
any help will be greatly appreciated.

spl-2.02.0000 not supported

Could anyone help?
http://forum.xda-developers.com/showthread.php?t=947511

i have the nerly same problem.
my HTC HD2 shows "pb81xxx"
the strange thing is that this is since i let it unlock in a mobile store.
bevor the unlocking i normaly flashed it to hspl 2.08 without any problems.
after the unlocking it is now not possible to flash it back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the bad thing is htat now winmob is rebooting 10 times a day. i still have 20 month warranty but i can not bring it back with the hspl 2.08 on it.
can anyone help?

did you do what it says in post 1?

can't you just flash your stock ROM via sd and remove hspl that way?

thank you both for your ideas.
1.) i thougt his way to flash is just for hspl 1024. but i have hspl 2.08?
you think it could work? and can i flash then back to hspl2.08 later wenn i use android?
2.) good idear. i never flashed from sd card but i sould try it.
but i think maybe if i can flash hspl 2.08 again it could solve my problem. i dont think that is is a hardware defect.
maybe the unlock software is not compatible with the open hspl 2.08.

Hspl 1024 is a version of the .exe, not an actual spl (like 2.08.hspl)
Hspl, hspl2, hspl1024, hspl3, hspl4., they can all (except the original hspl) be used to apply 2.08.hspl (amongst others),, its just the model id that each supports that changes in each release.
It was released to support the tmous hence 1024 for the rom size, and will allow flashing 2.08.hspl
The trick with the txt file let's it bypass the model id and telstra users soon found they could use it where hspl2 wouldn't work.
So, follow post 1 , and you'll soon have 2.08.hspl.

thanks for the important infos.
now i understand.
just one last "may be silly?" question.
my hd2 is the europe version with just 512kb rom/ram.
can i also use the hspl1024? (after your infos i now now that this tread is about the 1024 ram version. thx for that).
OR do you think one of the other hspl3, hspl4 could work with the pb81xxx version?
UPDATE: i tryed now hspl3 and hspl4 and both are working with my pb81xxx hd2
i now reflashed hspl2.08 and look if the anaoing handy rebooting works.
if not i read that i should flash back the original spl1.42 or so and than again hspl2.08. but i cant choose spl 1.42...it starts with spl 2.08.( in the hspl3 and hspl4 software list).
is it not possible to reflash it to spl1.42 with HSPL4?
funny that the mobile store changed the model ID via usb sim-lock-free software.

<deleted>
Edit actually maybe I'm wrong, (I often am!) and maybe hspl4 does only have 2.x and up, I only ever use hspl2, ,

[Help] HD2 Stuck "Loading" Flash Stock ROM from SD

Hi guys.
First of all let give congratulations to all members of this site and developers for the stuff that bring to us, noobie users all day.
I have two problems with my HTC HD2 and let me try to explain. Sorry my English, im Portuguese. hehe
My story and HTC HD2 starts with one usb charging in my computer and after that the usb for charge and sync never works again. So, my battery went out and i need to buy one in ebay to try flash with original rom leo.
When i start flashing leo with one original rom, it give me an error during update and when i start after that show me a message with a attention signal say "Software update failed! Please try again.".
I try to flash again and the image stucks in "LOADING..."
My bootloader in starts are show in this picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you can help me, i dont know what to do anymore.
I promise a lot of beer in Portugal.

I can not promise I will be able to help you out here. But for people to better help you it would be nice if you could post what exact ROM you are trying to flash from SD. Also what radio version the Rom has with it. Also you did rename your RUU_signed.nbh to leoimg.nbh right? Also please post what model of HD2 do you have, European, T-Mobile, etc.?

you flashed the wrong stock rom from sd card, it removed hspl and now the stock spl wont allow the rom flash to continue, hence RUU in th upper corner telling you it is in rom update mode.
bootloader - usb - hspl4 - 2.08.hspl - flash a rom.
OR
get a correct stock rom for your phone&region&carrier(your serial number) and flash it over usb, no need for hspl to do this.

Many thanks in advance for your replys.
The problem is that my hd2 dont connect usb.

ah ok, then get the correct stock rom for your phone, and flash it as leoimg.nbh.
it MUST be the correct stock rom for that phone, not just any stock rom, since any other stock would require hspl, which you cant have.
or, you could make a goldcard. If you have a faulty usb port, (is that the problem?) then a goldcard would be very useful since you cannot use HSPL.

Can you point me for the correct topic of goldcard ?
I dont know if is a faulty usb port because i think this happens because change the a lots of roms and android roms.
I already download the correct rom from htc with my serial. I extract with winzip and put in my class 4 8gb sd and stucks again in loading...

oh right, well 8gb cards rarely work anyway, for a start. certainly wouldnt work for a godlcard.
its not clear from your post, what kind of error do you get when you try to flash , example, hspl.exe through usb?

I have one sdcard 2gb, without any class to. With this i have the same problem.
I dont have any error, the loading stucks...
Trough usb i cant because my phone wont sync with pc at all.

TiagoS said:
Trough usb i cant because my phone wont sync with pc at all.
Click to expand...
Click to collapse
it doesnt need to sync.
when you plug the usb cable in, on bootloader, does 'serial' change to 'usb'?
if yes, run hspl4.exe on the PC.

No, it doesnt change from serial to usb.
(many thanks for try helping me samsamuel)

ahh ok, i think my first stop would be try another PC, and maybe usb cable too, see if it detects a usb connection, if not, then its prob the usb socket itself.

I already try that sam. I think problem is with usb port for flashing to much roms, because the usb port stops working when i try charging in a pc. After that doesnt work anymore.
I already try to see the goldcard but i dont understand much well the method.

well if you can find a working winmo mobile to borrow for 5 minutes, or are lucky enough to have a pci based sd card erader available, you can find the unique ID for an sd card, send it to me with an email address, and ill create you a file which you write (in a special way) to the sd card, and it magically allows you to flash any stock rom using leoimg.nbh.
Like a factory back door, if you will.
(Not sure if it works for custom roms, i dont think so)
read

I will borrow my girlfriend's father htc with winmo and i will get the id of one sdcard.
Do you want the RUU_Signed from original htc rom downloaded with my serial yesterday or is not necessary ?
Many thanks in advance.
(can you send me your email in one private message?)

no all i need is the ID and an email address. what you flash is up to you.

One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards

TiagoS said:
One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards
Click to expand...
Click to collapse
sure, no problem. Laptop may work, depends how its connected to teh motherboard inside. Worth a try though eh?

Yes, i will try today.
I will back soon and bring news, bad or good.

HELP
Hi all
i have the same problem with my LEO.
i tried flashing android but failed
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Thanks for your help
martin

killboy said:
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Click to expand...
Click to collapse
are you putting teh phone into bootloader? (coloured stripey screen) cos thats where you should usb flash from, when winmo isnt installed. (Well, actually its ALWAYS best to flash from bootloader, ..)

[Q] Original ROM Backup

Is it possible to make a backup of the original ROM?
I know how to update shiped or cooked ROM. I want to know is it possible to backup original, before doing ROM update?

You can always download your original rom from HTC site or find it here:
http://shipped-roms.com/index.php?category=windows mobile&model=Photon

emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?

sorry... it's out of my knowledge...
but tell me what is your original ROM version and from where. Maybe I can find it for you.

15MA1L said:
emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?
Click to expand...
Click to collapse
some problem

Original rom backup
Hi
Full ROM but I do not know,
HD MINI I do full backup with spb backup. works well and is the most complete upgrade 'the times to detect whether the ROM is different. trying to adapt to the new rom has no problems since then. Spb backup calendar contacts as well as sms etc ... I noticed that also makes backups (file system) ....... also imports well with CHT COOKIE 'S. I hope to be helpful.

15MA1L said:
emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?
Click to expand...
Click to collapse
I solve this problem
with DFT_SSPL_MINI.zip
I used spb in daimond and the like

I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

anh4xeo said:
I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
Click to expand...
Click to collapse
use SSPL:
http://forum.xda-developers.com/showthread.php?t=801481
when you run the SSPL the first time your phone goes to 3 colors screen and you will get error on your PC. don't worry wait about 10 sec and run SSPL again.
Good luck

anh4xeo said:
I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
Click to expand...
Click to collapse
1.extract DFT_SSPL_MINI.zip (http://forum.xda-developers.com/showthread.php?t=694409)
2.extract your Ruu...........exe
3. copy DFT_SSPL_MINI.exe and RUU_signed.nbh in some folder
4. run DFT_SSPL_MINI.exe

giorgib said:
1.extract DFT_SSPL_MINI.zip (http://forum.xda-developers.com/showthread.php?t=694409)
2.extract your Ruu...........exe
3. copy DFT_SSPL_MINI.exe and RUU_signed.nbh in some folder
4. run DFT_SSPL_MINI.exe
Click to expand...
Click to collapse
THANKS, I TRIED this method so many tiems with many different ROM now, I still doesnt work for me.I dont know which RUU....exe that my phone belong to, every one of them gave me Invalid vender ID. With nsourm and madmatt ROM the progress bar stuck at 0% then it failed after 5 minutes. Please help!!!!

anh4xeo said:
THANKS, I TRIED this method so many tiems with many different ROM now, I still doesnt work for me.I dont know which RUU....exe that my phone belong to, every one of them gave me Invalid vender ID. With nsourm and madmatt ROM the progress bar stuck at 0% then it failed after 5 minutes. Please help!!!!
Click to expand...
Click to collapse
First of all sorry to say you broke your mobile
Secondly, now you have no partition or the whatever ROM
... and in these circumstances it is impossible to do update
Third, I think you will never again make that mistake stop connection in ROM update
and in the end the only thing I can recommend to send back to the factory, I'm sorry, honestly but I can not give you any better advice

15MA1L said:
First of all sorry to say you broke your mobile
Secondly, now you have no partition or the whatever ROM
... and in these circumstances it is impossible to do update
Third, I think you will never again make that mistake stop connection in ROM update
and in the end the only thing I can recommend to send back to the factory, I'm sorry, honestly but I can not give you any better advice
Click to expand...
Click to collapse
One last hope, will a SD Goldcard do the job?

anh4xeo said:
One last hope, will a SD Goldcard do the job?
Click to expand...
Click to collapse
I do not have any experience with SD GoldCard so I do not know
Q: Have you asked anyone here for that?
http://forum.xda-developers.com/showthread.php?t=682051