Database Users

IPL or SPL 3.08 failed formatting the partition RECOVERY

I am a great FAN of this section as I have flashed almost every WM6 or WM6.1 ROM into my charmer....
But the problem came the last month when I had a fialed Flashing of the ROM resulting in the hanging problem at the T-mobile Boot screen with IPL 3.08 and SPL 3.08!!!
As I have read almost every thread and discovered that a lot of others are facing the same problem wthout any satisfactory solution.....(Reason: on hard reset it says formatting failed!!!)
Infact the only story of recovery was from dorfdisko
dorfdisko said:
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
hey, now my battery is full charged an the ruu starts patching but at 95% ist says:
This NBF File cannot be used for your PDA Phone. Please check NBF File.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used this one:
RUU_Prophet_220734_2207114_024721_NVID
i tried also:
Prophet_G3_G4_RadioRom_v2.69.21
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
but no succeed
what should i try now?
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
Click to expand...
Click to collapse
But for me I could not get through this grim situation with the same result shown above error at 95%......
So I would like to request all the developers (especially dorfdisko the only lucky person coming out of this situation using the PROPHET ROM in someway!) to look into the matter systematically and develope some solution in the form of specially cooked ROM or something like this!!!
Thanks in anticipation on my behalh and others who are caught up in similar situation!!!

Have you tried http://forum.xda-developers.com/showthread.php?t=471490 ?
You can also try to flash the latest German ROM. (I do that with the English one when something fails.)
That may only work with the NoID RUU from the link above. It can work because the IPL and SPL of a German ROM have got other extended code numbers also they are the same version. They will overwrite the old ones and maybe that works.
I can upload the nk.nbf later for you.

Yes please!
It would be an aweful kind of you!!!

Here is the needed German nk.nbf. Use only with NoID RUU!
http://rapidshare.com/files/217609597/nk.nbf
Hope this works for you.

Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.

ChrBeck said:
Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.
Click to expand...
Click to collapse
Sorry I was busy somewhere else so could not found time for testing this procedure!!!
Would tell you soon about the said matter!!!

Thanks for that
EDIT
I've seen that you opened a thread before and I replied there too. Not very nice to open a new one. And next time tell us that you opened a thread before. That will help us much.
Thanks
END OF EDIT

Sorry for that issue!!!
And as regards your ROM file it didnt work either.
As the phone hangs again on the splash screen and on hard resetting it says format failed as ususal!!!
Now what can be done?

You may can't flash the File with the NoID ruu because your device isn't CDI unlocked. I'll search and maybe tell you things later.

The file was flased to the end but then that was the result as I described above!
Anyway thanks for your painstaking!!!

Yes. It looks like flashed to the end. But the bootloader rejects everything and nothing will change. You can only flash with the original Utility with fitting code. Nothing else. Believe me it got never flashed.
And I've got an other idea:
You can format the Charmer over TTY. But I don't know about funktion in bootloader mode. And I would not recomend you to try it on your own. Maybe Vlodeck reads the thread. He should know more about it. Otherwise I can ask in Wizard forum for you.

OK I have a idea now. You can try with MTTY and I can tell you how.
First you need MTTY: http://wiki.xda-developers.com/uploads/mtty.exe
You need to have a full battery. (Otherwise you can power your phone with a AC adaptor with 3 4.5 or 5 volt. I can tell you the pin layout)
Put your device in bootloader mode (Press Camera while reseting).
Connect it to USB.
Start MTTY and choose USB.
Wait untill it is connected to the phone.
First type in task 32 and hit enter....Wait for feedback.
Then type task 28 and hit enter....Wait for feedback.
Now start a original ROM upgrade and let it run till the end.
Warning: Never restart your phone untill the Flashing is finished. Restarting the phone will kill your device completly.
If there are errors with the comands, for example Invalid comand please write me. I'll tell you what to do then.

i have the same problem with ipl & spl 3.08
this last solution doesn`t work.
do you have another idea?

What feedback do you get after you typed the comands?

this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h

OK. That was clear. The comands won't work in Cmd> Mode. You need to get in USB> Mode. But I don't know how to do that so I can't do anything at the moment.

adrianoND said:
this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h
Click to expand...
Click to collapse
Command wrong, need >set 32< and format all or format EXTROM, but you need Gold Card created QMAT programm and worked WM Phone to create GoldCard.

[Help] HD2 Stuck "Loading" Flash Stock ROM from SD

Hi guys.
First of all let give congratulations to all members of this site and developers for the stuff that bring to us, noobie users all day.
I have two problems with my HTC HD2 and let me try to explain. Sorry my English, im Portuguese. hehe
My story and HTC HD2 starts with one usb charging in my computer and after that the usb for charge and sync never works again. So, my battery went out and i need to buy one in ebay to try flash with original rom leo.
When i start flashing leo with one original rom, it give me an error during update and when i start after that show me a message with a attention signal say "Software update failed! Please try again.".
I try to flash again and the image stucks in "LOADING..."
My bootloader in starts are show in this picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you can help me, i dont know what to do anymore.
I promise a lot of beer in Portugal.

I can not promise I will be able to help you out here. But for people to better help you it would be nice if you could post what exact ROM you are trying to flash from SD. Also what radio version the Rom has with it. Also you did rename your RUU_signed.nbh to leoimg.nbh right? Also please post what model of HD2 do you have, European, T-Mobile, etc.?

you flashed the wrong stock rom from sd card, it removed hspl and now the stock spl wont allow the rom flash to continue, hence RUU in th upper corner telling you it is in rom update mode.
bootloader - usb - hspl4 - 2.08.hspl - flash a rom.
OR
get a correct stock rom for your phone&region&carrier(your serial number) and flash it over usb, no need for hspl to do this.

Many thanks in advance for your replys.
The problem is that my hd2 dont connect usb.

ah ok, then get the correct stock rom for your phone, and flash it as leoimg.nbh.
it MUST be the correct stock rom for that phone, not just any stock rom, since any other stock would require hspl, which you cant have.
or, you could make a goldcard. If you have a faulty usb port, (is that the problem?) then a goldcard would be very useful since you cannot use HSPL.

Can you point me for the correct topic of goldcard ?
I dont know if is a faulty usb port because i think this happens because change the a lots of roms and android roms.
I already download the correct rom from htc with my serial. I extract with winzip and put in my class 4 8gb sd and stucks again in loading...

oh right, well 8gb cards rarely work anyway, for a start. certainly wouldnt work for a godlcard.
its not clear from your post, what kind of error do you get when you try to flash , example, hspl.exe through usb?

I have one sdcard 2gb, without any class to. With this i have the same problem.
I dont have any error, the loading stucks...
Trough usb i cant because my phone wont sync with pc at all.

TiagoS said:
Trough usb i cant because my phone wont sync with pc at all.
Click to expand...
Click to collapse
it doesnt need to sync.
when you plug the usb cable in, on bootloader, does 'serial' change to 'usb'?
if yes, run hspl4.exe on the PC.

No, it doesnt change from serial to usb.
(many thanks for try helping me samsamuel)

ahh ok, i think my first stop would be try another PC, and maybe usb cable too, see if it detects a usb connection, if not, then its prob the usb socket itself.

I already try that sam. I think problem is with usb port for flashing to much roms, because the usb port stops working when i try charging in a pc. After that doesnt work anymore.
I already try to see the goldcard but i dont understand much well the method.

well if you can find a working winmo mobile to borrow for 5 minutes, or are lucky enough to have a pci based sd card erader available, you can find the unique ID for an sd card, send it to me with an email address, and ill create you a file which you write (in a special way) to the sd card, and it magically allows you to flash any stock rom using leoimg.nbh.
Like a factory back door, if you will.
(Not sure if it works for custom roms, i dont think so)
read

I will borrow my girlfriend's father htc with winmo and i will get the id of one sdcard.
Do you want the RUU_Signed from original htc rom downloaded with my serial yesterday or is not necessary ?
Many thanks in advance.
(can you send me your email in one private message?)

no all i need is the ID and an email address. what you flash is up to you.

One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards

TiagoS said:
One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards
Click to expand...
Click to collapse
sure, no problem. Laptop may work, depends how its connected to teh motherboard inside. Worth a try though eh?

Yes, i will try today.
I will back soon and bring news, bad or good.

HELP
Hi all
i have the same problem with my LEO.
i tried flashing android but failed
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Thanks for your help
martin

killboy said:
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Click to expand...
Click to collapse
are you putting teh phone into bootloader? (coloured stripey screen) cos thats where you should usb flash from, when winmo isnt installed. (Well, actually its ALWAYS best to flash from bootloader, ..)

[Q] HTC HD2 ModelID Problem

I hope you can help me with this one.
i have a HTC LEO 512 (NL).
I did the official rom update true the website of HTC NL and that went wrong by upgrading. Now the phone will not exept any Radio, ROM or MAGDLR or what so ever. The HTC logo looks disorderd (white stripes true it) and in de bootloader screen there is no PB81100 but a strange sign and a S.
I tried to use an other battery but no succes.
I didn't try the goldcard method because i don't have the resources en knowledge for it.
However i tried Task28, Task38, Task 2a, Task29 with MTTY and Task29 with new rom from SD card. But it doesn't go any further. I don't know about the kaiser trick maybe that, or goldcard is an idea? or do you have some commands for MTTY for me?
What I CAN do is HSPL4 the phone to any version i want with success ( spl 2.08, hspl 2.08, spl 3.03, hspl 3.03, spl 1.66, hspl1.66, spl 1.42 etc.)
I tried a lot of roms allready. When i use a dutch (NL) one its getting the error afther 1%. When i use a uk or Tmous rom its getting the error by 4%. I'm not able to install Magdlr to test if boot Android from SD method works.
I have an attachment (7z or zip) with important information in it. There is a export of the MTTY commands i did with all the info of the phone itself and some pictures of the error and the very strange sign in the bootloader. (ITS JUST 800kb). I will attach the file within a few ours to this topic.
I hope you guys can help me.
Of course there is a reward for it when its fixed to buy a couple of coffee's or anything else

Is this what your HD2 looks like?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If these images mach your HD2 then your device I.D. has gotten screwed up from flashing the ROM you flashed. Please post the full ROM name you flashed. Also did you enter your SN into the HTC site to confirm the ROM was for your HD2? I am not sure if it is a way to reset your device I.D. without JTAG. But I am going to send some messages to a couple of people I know and possible make a call to my buddy that works at the local Cell Phone Repair shop to see what I can find out for you as I want to know if you can do it too. Cause you are the second person in a week that I have seen with this problem

Yes that's the one! the one with the bootloader looks a like mine but with other strings. How can we fix this?
Many thanx in advance!!! Your great!
I hope there is a mather with goldcard of MTTY mode.
I have 2 HTC hd2 the other one had Bad blocks and don't know how to fix that problem. (there was a litlle bit of water damage in the speaker).
Even boot android from SD in Magdlr doesn't work on that one. I can install magdrl, all roms, all radio's on it. but cannot install system partions (157mb or so) or install rom by CWM or DAF.
maybe also a try with PSAS / REVSKILS goldcard or so to don't use that blocks anymore or something? I will make an other question thread for that.

phantomboy said:
Yes that's the one! the one with the bootloader looks a like mine but with other strings. How can we fix this?
Many thanx in advance!!! Your great!
I hope there is a mather with goldcard of MTTY mode.
I have 2 HTC hd2 the other one had Bad blocks and don't know how to fix that problem. (there was a litlle bit of water damage in the speaker).
Even boot android from SD in Magdlr doesn't work on that one. I can install magdrl, all roms, all radio's on it. but cannot install system partions (157mb or so) or install rom by CWM or DAF.
maybe also a try with PSAS / REVSKILS goldcard or so to don't use that blocks anymore or something? I will make an other question thread for that.
Click to expand...
Click to collapse
I have not heard back from any of my contacts yet but a gold card might help you out here. Seeing as you have two HD2s then you can use the other one to make a gold card, or at least I think you can. Biut I am not 100% sure a gold card will work but it is worth a try.

can you check the attachment? that are some photo's of the errors and a MTTY export

phantomboy said:
can you check the attachment? that are some photo's of the errors and a MTTY export
Click to expand...
Click to collapse
I did check out your zip file and I think your device I.D. is definitly your problem. Also sorry it taken me a while to post back here too. I finally got a reply from my buddy that I e-mailed. He told me that yes inded when you flash with a goldcard it gives the device a GOLD ID 11111111 so it can flash nomatter what. He told me the only thing that will keep a gold card from sucessfully flashing is if you have physical NAND damage or other hardware problems. So typ in "How to make a gold card for HTC HD2" into google and you should find a couple of links to one or two guides here on XDA on how to make one. I would leave some links for you but I am posting on my phone and it sucks trying to post links on my phone.

I have the same problem .
Did you fix it ?
Thanks !

No still no solution
PLEASE can someone help me? I tried HSPL 2.08, 3.03, 1.42 and 3 soft SPL's
radio does not work and Goldcard method also does not seem to do the trick.
The LEO is not fallen down or has no water damage!
can someone help us?

JTAG is your only possible solution. All other methods rely on a valid deviceID, even goldcard.

What is JTAG? Is someone in NL or Germany who can do this for me?
Who can help me/us with this?
To who can I go with this phone within 75km? or Send it to?
I life in Limburg (south of holland).

EDIT - let me just add a quick caveat here, , , my last post was pretty direct, , there may be some other option, and/or JTAG may not work, i've never used it, , i'm only basing my reply on 18 months hard reading on here, seeing the same issue several times before, and not having seen any solution ... and i'd hate for you to spend money on jtag and for it not to work.
that being said, if you're prepared to post it, send T'macgnolia a PM, i see him saying that he knows someone who offers the service quite often.

[TOOL] Advanced ROM Update Utility for HTC 7 Mozart by Barin (asusmobile.ru)

I post this on behalf of Barin (the author of the utility).
DOWNLOAD:
MozartAdvancedRUU 1.0.3
1. Possibility to choose one from several NBH files. Files should be placed in one folder with utility.
2. Possibility to choose the way (option) of flashing
3. Possibility to get NBH file info (Modification date, Model ID, CID, Version, Lang, Chunk size)
Regular RUU (Task 28)
Hard Reset is performed straight after flashing automatically (good for NBH containing OS section)
Custom RUU (Task 00)
to install only radio roms without performing hard-reset.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remeber as always:
Unskilled interference to your phone's OS can totally crash your device.
If you understand what are you going to do - go ahead.
No warranty.... use on your own risk.
Requirements:
RSPL
Net Framework 3.5
Changelog:
-v1.03 (06.11.11 - task 00 enabled - X downloads)
-v1.02 (02.11.11 - initial release - 249 downloads)
Other great tools by Barin:
OS Builder (WM Kitchen)
OS Builder 7 (WP7 Kitchen)
LEO Advanced ROM Update Utility
Titan Advanced ROM Update Utility
Blackstone Advanced ROM Update Utility
Topaz Advanced ROM Update Utility
Kovsky Advanced ROM Update Utility
HTC Splash Tool
My projects:
HD2O ROM Series
X1O ROM Series
HTC HD2 stock ROM overview thread
Latest Opera 9.70 thread
HD2 WP7 donation fund for da_g
HD2 haret/linux/android donation fund for devs (cotulla, dcordes, markinus, letama, netripper)
HD2 6.5.3 global bold font fix (by ultrashot)
HD2Owner's youtube channel

Thank you for support and publishing, my friend!

thank you for all the work you do sir..

Yes!!!! Asusmobile Team it's cool

-=Barin=- said:
Thank you for support and publishing, my friend!
Click to expand...
Click to collapse
You did it again my friend. Hope to be cooking 7 Mozart soon.
TQ

dose it help in flashing boot loader 4.xxxx or not
pls whoever knows any clear procedure to flash my mozart boot loader 4.xxxx
pls help
tnx

illi said:
You did it again my friend. Hope to be cooking 7 Mozart soon.
TQ
Click to expand...
Click to collapse
Dude, WP7 KITCHEN - OS Builder V1.3.187 FULL (03.11.2011) is published. Barin, ultrashot, feropont, me and other asusmobile staff - are now cooking for Mozart with it.
Rhiff, buddy, edit you post to add one more great tool by Barin.

Hi,
I am wondering whether this application allows the flashing of all the updates inside a package besides the operating system.
In my case, I do not want to reflash the operating system part and lose all my data - but I would like to do an update for the radio rom (and there's a radiocust too, can you tell me, what it is?)
For some reason, I can not select Task 28 or Task 32, both select boxes are grayed out.
How can I prevent a Task 28 from happening?
Thanks for answering!

Updated version is ready.
Custom mode is enabled (Task 00)

didn't work for me, how i can use this tool?

Bad Tiger said:
didn't work for me, how i can use this tool?
Click to expand...
Click to collapse
Read about requirements in the first post

HD2owner, slightly out of topic, I've been struggling in order to downgrade my SPL, which is of Orange Switzerland (071), with bootloader 4.60.
Any clue where I can find the correct .nbh file for that?
Thanks!

i know im about a year and a half late but thanks anyways!

can I use this tool to flash these radio? http://forum.xda-developers.com/showthread.php?t=1287062&highlight=radio
i noticed that the radio packages have their own ROm update utility. Can I just strip the radio file and load it using this advanced tool?

iamwin said:
can I use this tool to flash these radio?
Click to expand...
Click to collapse
yep

Question
Hello!
I've tried to use this tool, but an error stops me always...
My computer (and the program) cannot recognize my phone, and on my phone, there is no "USB" sign. There is no connection between my phone and the progam. I tried few cables, few USB-ports (I have two ), but nothing at all, it have to be a driver problem. I have a Mozart and a Windows 7 running on a MacBook Air (separately with BootCamp, not virtually).
Can you please help me, where can I get the necessary drivers from?
I've tried all the advices I found on Google, but it didn't help.
Thank you in advance

PsYtiB said:
Hello!
I've tried to use this tool, but an error stops me always...
My computer (and the program) cannot recognize my phone, and on my phone, there is no "USB" sign. There is no connection between my phone and the progam. I tried few cables, few USB-ports (I have two ), but nothing at all, it have to be a driver problem. I have a Mozart and a Windows 7 running on a MacBook Air (separately with BootCamp, not virtually).
Can you please help me, where can I get the necessary drivers from?
I've tried all the advices I found on Google, but it didn't help.
Thank you in advance
Click to expand...
Click to collapse
please install drivers first (download WINDOWS MOBILE DEVICE CENTER FOR WIN7).

iamwin said:
please install drivers first (download WINDOWS MOBILE DEVICE CENTER FOR WIN7).
Click to expand...
Click to collapse
I already tried everything, it just not recognizes my phone.
The WMDC says: no connection, if I try to download the drivers through Windows Update, it is not successful...that is why I want to ask somebody kindly to zip me those drivers if it's possible...thank you

You should put your phone in bootloader mode... While shuting down keep Vol down pressed until you see tricolor screen

rikee said:
You should put your phone in bootloader mode... While shuting down keep Vol down pressed until you see tricolor screen
Click to expand...
Click to collapse
Okay, thank you for trying to help me, but I'm not a newbie, I red all the related posts, did all the advices... I was rooting and customizing Android devices before so believe me, I can put my phone into SPL mode...I just need that drivers...maybe I try on another computer, I have a clue that the problem is the 64-bit OS...

[Q] MAGLDR113_DAF jumps from 0% to 100%

Hi, I'm been trying to get my HD2 to upgrade from WMB 6.5 to 7 for the past day or so, but I always get stuck in the step where when I use MAGLDR113 the progress bar will jump from 0% to 100% after a few seconds of starting. And then on reboot it will get stuck in the white background loading splash screen with the HTC logo staring back at me.
My red/green/blue screen reads:
PB8100 SS-BC
SPL-2.08.HSPL 8B XC
CotullaHSPL
0x05 <---
0x10 <--- these numbers seems different to what people post out there...
My radio is 2.15.50.14
Been doing this over and over but nothing seems to work.

i supposed that u have successfully install the MAGLDR
Try boot your phone in to MAGLDR menu by
turn the phone off and HOLD the power button until the menu showed up.

have you tried to use HD2 NAND Toolkit? give the link below a try
it could be also that the zip File is corrupted

Do you get any error messages from RUU?
Sent from my HTC HD2 using XDA

@thamlim : holding down POWER button doesn't work, still get stuck on HTC white bootscreen
@mengfei : I've re-downloaded the .zip several times, don't think it's corrupted but won't rule it out completely. I will give the NAND toolkit a try tonight.
@hengsheng120 : How can you tell if there were error messages? I am assuming no since there were nothing that looks like error displayed on screen (desktop & phone), and RUU hasn't generated any log files that I can see.

I meant Dft flasher. No USB init failed? Does it give a successful message?

hengsheng120 said:
I meant Dft flasher. No USB init failed? Does it give a successful message?
Click to expand...
Click to collapse
Which one is the Dft flasher? The one for installing HSPL? No error with that one.
@mengfei : going through instructions in the page that you gave me, i'm still getting the same problem. If you search for the sentence "when the phone starts it will show you the magldr bootloader" in that page, that's the place where the phone boots into white background HTC logo (same one after Task29), holding down power button on startup still gives same result.

The window when you are flashing wp7, but nvm that...
food.poison said:
My red/green/blue screen reads:
PB8100 SS-BC
SPL-2.08.HSPL 8B XC
CotullaHSPL
0x05
0x10
My radio is 2.15.50.14
Click to expand...
Click to collapse
Also yes, I just noticed most of this configuration doesn't seem to match an HD2's. you sure that's what it says exactly?
Have you been able to install android roms?
From that info you gave, the SS-BC means that you have different NAND chip made by samsung instead of hynix. It should say HX-BC for most HD2's.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Other people seem also to have this same problem, they can't flash roms on ones that hd2s that have SS-BC in bootloader.
http://www.pocketpc.ch/htc-hd2-andr...tet-handy-bootloader-trotz-richtiger-spl.html
Faulty NAND may be the reason:
AndrewSh said:
Important information concerning Leo flashing algorithm:
Leo is manufactured with 2 different NAND-Flash ROM chipset types. You can detect the type entering tri-color boot mode.
If you see
PB81120 SS-B3 in the first line - that means NAND-Flash ROM from Samsung - KBY00U00VM
If you have
PB1120 HX-B3 in the first line - that means NAND-Flash ROM from Hynix - h8BFS0WU0MCR
After one year usage Samsung chipset usually has a dozen of bad clusters. Hynix normally has none of them or just a couple.
So for devices with SS-B3 and Samsung chipset recommended flashing algorithm is the following:
1. Task29
2. Task32
For devices with HX-B(3/С) and Hynix chipset - Task28 is totally acceptable.
The chipset information is provided by haccker
HD2Owner, I suppose this info should be lifted up to first or second (reserved) post
Click to expand...
Click to collapse
See this thread for more info: http://forum.xda-developers.com/showthread.php?t=917807
If your screen really says PB8100 however, which, by google search is weirdly found in mostly chinese forum posts, I suspect your device may also not be supported, but i hope it's a typo.

May be u should try Task29 again , and then try install cLK instead of MAGDLR, and see is that work?