Database Users

My P4350 won't start anymore

My Herald doesn't start anymore the battery was empty the day before I charged it.. I also answered a call when the battery was almost empty.. after that I put it on the AC to charge it..
the day after.. I turned it on.. the htc screen came.. the windows mobile screen came (I upgraded to WM6) and the the screen goes black and restarts htc screen again.. and so on and so on what is wrong?
if you need to know more then let me know.. but I don't want to take it to a repair centre yet.. please help!

What rom are you using? Try hard resetting the phone. If not, try reloading the stock RUU thru bootloader mode.

hmm I don't know the exact number since I can't check it I do have these numbers:
4.17.404.2
4.1.13.44
02.94.90
these are noted on the exe file of the RUU. It's a dutch version.

htc43owner50 said:
hmm I don't know the exact number since I can't check it I do have these numbers:
4.17.404.2
4.1.13.44
02.94.90
these are noted on the exe file of the RUU. It's a dutch version.
Click to expand...
Click to collapse
try to hold the camera button while turning the device on... if you can get into bootloader, it should show the ipl/spl info... and u should be able to flash the oem rom from there

If it turns on this probably isn't the problem, but it should be noted that discharging a lithium ion battery completely will make it useless; it will no longer hold a charge.
I don't know the circumstances so I can only suggest things where I've seen a reset like that... if you have a memory card in try popping it out and then turning it on.

thank you kraftey
it worked! the phone reached the today screen after I popped out the memory card.. That is really bizar.. it would be nice of HTC came with a update for this

My p4350 have the some problem !
I have tried 2 diferent Roms , one of them the Ruu , and have the same problem ! Only with the memory card out it start :/ Im thinking send the Htc to the repair center ...

Is it looping when the memory card is in? But when you remove the card it boots normally?
If that's the problem, you probably have something installed on ur memory card that's causing the loop... try this
take out ur memory card,
Try using a file explorer (like resco or total commander)
and go into your Windows directory and rename a file called
omap850_sdhc.dll into omap850_sdhc.dll.old then soft reset your phone and it should start working fine.

duprade said:
Is it looping when the memory card is in? But when you remove the card it boots normally?
If that's the problem, you probably have something installed on ur memory card that's causing the loop... try this
take out ur memory card,
Try using a file explorer (like resco or total commander)
and go into your Windows directory and rename a file called
omap850_sdhc.dll into omap850_sdhc.dll.old then soft reset your phone and it should start working fine.
Click to expand...
Click to collapse
Hi I'm having the same problem.
Now I see the File but it wont Rename. Everytime I Change de name it pops back to its original name.

install total commander or an alternate file explorer ... don't use the built in one.

Im using a pdaviet Rom, resco explorer and tottal commander dont allowed me rename that file

If it doesn't work, first try a hard reset.
If that doesn't work, try reflashing.
If none of the above work, all you can do is hard-spl.
Hope it helps.

delete the file... and soft reset.

Wierd folders on my Herald & Laptop
my herald storage card & sync folder have weird folders that have unrecognizable characters for folder names and I cant erase them in either place. what are they and how do I get rid of them???
Thks ahead
Note: here's the name of the folders:
¦ì-²ñ++.âÅÜ
<¬2Ñ`~"V.<.R
-4¦4n.ë.--+
B¥iÖçs.5n

taz357 said:
my herald storage card & sync folder have weird folders that have unrecognizable characters for folder names and I cant erase them in either place. what are they and how do I get rid of them???
Thks ahead
Click to expand...
Click to collapse
Reformat your storage card. It's corrupted.

just tried-adapter for laptop wont read it but it work on the phone.

ivanmmj said:
Reformat your storage card. It's corrupted.
Click to expand...
Click to collapse
Does best buy,circuitcity or radio shak have card readers 4 micro sd??

taz357 said:
Does best buy,circuitcity or radio shak have card readers 4 micro sd??
Click to expand...
Click to collapse
Office Depot does. I don't know about the other ones.

I have this thing, and I bought it at BestBuy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How to flash your Polaris using the microSD card [Guide]

**IMPORTANT***
Please make sure you have HardSPL on your device. And also make sure you have more than 50% of battery left or you can plug in a charger just to make sure there is no power failure. DO THIS AT YOUR OWN RISK.
please use a ROM that is meant to be used with the Polaris. Please note that this method is meant only for the HTC Polaris, for other devices please refer to their respective wiki.
Instructions
Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is)
Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "POLAIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to POLAIMG.nbh
Copy the file POLAIMG.nbh to the root of your microSD card
Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears.
You will first see a tri-color screen then the information on the card. Press power button to start flashing.
After all these are done, press the reset button located at the bottom of the phone to reset the device.
The procedure can be also used to flash Radio ROM's to your device.
Cheers,
Taiseer

Thanks for this guide!
Now also linked in wiki.

Thax for this guide!! I just wonder how the flash from memorycard is suppose to do I know now just great!

For some strange reason that doesn't work.

nice. might have to compile all these guides into one and make a sticky post when i find some time.

rev3nant said:
For some strange reason that doesn't work.
Click to expand...
Click to collapse
Its been tested several times l

taiseer999 said:
Its been tested several times l
Click to expand...
Click to collapse
I'm really happy with that. But it doesn't change anything. Maybe the phone doesn't recognize the card while in loader (SDHC) or whatever. It just flashes the 3-color screen and tries to continue loading.

Is ur PDA a Touch Cruise or an XDA Orbit II?

rev3nant said:
I'm really happy with that. But it doesn't change anything. Maybe the phone doesn't recognize the card while in loader (SDHC) or whatever. It just flashes the 3-color screen and tries to continue loading.
Click to expand...
Click to collapse
I am using a sanDisk 4GB SDHC and I've never formated it, used the same card in my Kaiser as well. You might want to try to format it

am having the same problem the bootloader just flashes up and then it continues to load as normal .
am running a TC
4gb SDHC fat 32
HardSPL
battery over 50%

hawk eye tim said:
am having the same problem the bootloader just flashes up and then it continues to load as normal .
am running a TC
4gb SDHC fat 32
HardSPL
battery over 50%
Click to expand...
Click to collapse
When you put your phone on bootloader mode; whats the info displayed?

just figured it out
you need to press and hold the camera button and give the reset button a quick press (do not hold down) and only release camera button when bootloader starts.
i am off flashing know
ttfn

taiseer999 said:
When you put your phone on bootloader mode; whats the info displayed?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have the same problem, when I go in boot loader mode the upgrade don't start but remain in boot loader.

adrenalynik said:
I have the same problem, when I go in boot loader mode the upgrade don't start but remain in boot loader.
Click to expand...
Click to collapse
its a sd card problem you r going have to format it

taiseer999 said:
its a sd card problem you r going have to format it
Click to expand...
Click to collapse
I have re-format in fat32 with windows but don't work...

my polaris screen displayed ''loading...''
what will dispaly on screen when finish????

taiseer999 said:
**IMPORTANT***
Please make sure you have HardSPL on your device. And also make sure you have more than 50% of battery left or you can plug in a charger just to make sure there is no power failure. DO THIS AT YOUR OWN RISK.
please use a ROM that is meant to be used with the Polaris. Please note that this method is meant only for the HTC Polaris, for other devices please refer to their respective wiki.
Instructions
Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is)
Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "POLAIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to POLAIMG.nbh
Copy the file POLAIMG.nbh to the root of your microSD card
Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears.
[*]You will first see a tri-color screen then the information on the card. Press power button to start flashing.
[*]After all these are done, press the reset button located at the bottom of the phone to reset the device.
The procedure can be also used to flash Radio ROM's to your device.
Cheers,
Taiseer
Click to expand...
Click to collapse
how do i konw the flash done or not?

scholescheng said:
how do i konw the flash done or not?
Click to expand...
Click to collapse
You'd be notified.

taiseer999 said:
You'd be notified.
Click to expand...
Click to collapse
thx, i am still waitting my polaris "loading..."

[Q] my tatoo locked,i cant access any thing!

hi guys
i have some problems on my friends htc tatoo
i dont know what he didi,but the phone locked after start up and wanted to sign in whit my google account to unlock!
but i cant access setting to set connection setting for internet
and icant connect with wi-fi network because the phon is lock and i cant turn wi-fi on!
i cant acces recovery menu because the phone wasent rooted and flashed any recovery menu
no nandroid back up exist!
so my friends tatoo just turn on and off and i cant do any thing with it!
even i cant change the rom
if somebody knows please guide me
thanks all
pictures :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
note : in pictures the simcard wsent inserted ,but if i insert the simcard, its still the same!

I have exactly the same problem - with a friends HTC Tattoo.
I even tried factory reset (while phone is off - press Menu+Back+TurnOn) but nothing happens.

You can flash the official rom again if you cannot wipe. Running the RUU utility, take the rom.zip from user's temp folder and rename it to CLIKIMG.zip
Then copy it to root of sdcard and reboot to fastboot. I don't remember the key compinations, but you can find them if you search the stickies of this forum.

ikenny said:
I have exactly the same problem - with a friends HTC Tattoo.
I even tried factory reset (while phone is off - press Menu+Back+TurnOn) but nothing happens.
Click to expand...
Click to collapse
i done it for now,and the screen lights is on and off repetitive and it takes until i pushed the buttons,then when i release the menu+back keys,the phone boots and still the same problem
dancer_69 said:
You can flash the official rom again if you cannot wipe. Running the RUU utility, take the rom.zip from user's temp folder and rename it to CLIKIMG.zip
Then copy it to root of sdcard and reboot to fastboot. I don't remember the key compinations, but you can find them if you search the stickies of this forum.
Click to expand...
Click to collapse
how can i runnig ruu utulity? from pc?
where can i finde ruu?
thanks
edit:
i found some RUU from link blow:
http://shipped-roms.com/shipped/Click/
but i dont know which one must be downloaded!
i know it must be asia version,but which asia?!!
on more thing :
this is a exe file,how can i copy it in sdcard and run it?
i searched many topics,but cant finde fastboot guidance
please guide me my friend

I can't help you if you don't know what rom you have. You can try them though, if is they aren't suitable the didn't flash.
You must run RUU utility from pc, and will extract the rom.zip file in your temp folder.
You can access fastboot if you power off the device and hold volume down and power button. After that in fastboot you can flash the rom pushing the volume down key.

dancer_69 said:
I can't help you if you don't know what rom you have. You can try them though, if is they aren't suitable the didn't flash.
You must run RUU utility from pc, and will extract the rom.zip file in your temp folder.
You can access fastboot if you power off the device and hold volume down and power button. After that in fastboot you can flash the rom pushing the volume down key.
Click to expand...
Click to collapse
thanks my dear friend
going to test it....

finaly the phone lock is opened
HDRAGON said:
thanks my dear friend
going to test it....
Click to expand...
Click to collapse
i tried the version RUU_Click_HTC_Asia_WWE_SEA_1.67.728.8_release_signed_NoDriver
from the link in my previouse post,
nothing was extarcted ! its begining to update rom just from pc to phone!
i installed htc synce for android devices it first and fortunately the phone was found by pc!during it was in lock screen!
i did run the update file and its begining to flash the phone
atlast the phone flashed and the new version startig up
special thanks to dancer_69, my dear friend for his guidance

[Help] HD2 Stuck "Loading" Flash Stock ROM from SD

Hi guys.
First of all let give congratulations to all members of this site and developers for the stuff that bring to us, noobie users all day.
I have two problems with my HTC HD2 and let me try to explain. Sorry my English, im Portuguese. hehe
My story and HTC HD2 starts with one usb charging in my computer and after that the usb for charge and sync never works again. So, my battery went out and i need to buy one in ebay to try flash with original rom leo.
When i start flashing leo with one original rom, it give me an error during update and when i start after that show me a message with a attention signal say "Software update failed! Please try again.".
I try to flash again and the image stucks in "LOADING..."
My bootloader in starts are show in this picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you can help me, i dont know what to do anymore.
I promise a lot of beer in Portugal.

I can not promise I will be able to help you out here. But for people to better help you it would be nice if you could post what exact ROM you are trying to flash from SD. Also what radio version the Rom has with it. Also you did rename your RUU_signed.nbh to leoimg.nbh right? Also please post what model of HD2 do you have, European, T-Mobile, etc.?

you flashed the wrong stock rom from sd card, it removed hspl and now the stock spl wont allow the rom flash to continue, hence RUU in th upper corner telling you it is in rom update mode.
bootloader - usb - hspl4 - 2.08.hspl - flash a rom.
OR
get a correct stock rom for your phone&region&carrier(your serial number) and flash it over usb, no need for hspl to do this.

Many thanks in advance for your replys.
The problem is that my hd2 dont connect usb.

ah ok, then get the correct stock rom for your phone, and flash it as leoimg.nbh.
it MUST be the correct stock rom for that phone, not just any stock rom, since any other stock would require hspl, which you cant have.
or, you could make a goldcard. If you have a faulty usb port, (is that the problem?) then a goldcard would be very useful since you cannot use HSPL.

Can you point me for the correct topic of goldcard ?
I dont know if is a faulty usb port because i think this happens because change the a lots of roms and android roms.
I already download the correct rom from htc with my serial. I extract with winzip and put in my class 4 8gb sd and stucks again in loading...

oh right, well 8gb cards rarely work anyway, for a start. certainly wouldnt work for a godlcard.
its not clear from your post, what kind of error do you get when you try to flash , example, hspl.exe through usb?

I have one sdcard 2gb, without any class to. With this i have the same problem.
I dont have any error, the loading stucks...
Trough usb i cant because my phone wont sync with pc at all.

TiagoS said:
Trough usb i cant because my phone wont sync with pc at all.
Click to expand...
Click to collapse
it doesnt need to sync.
when you plug the usb cable in, on bootloader, does 'serial' change to 'usb'?
if yes, run hspl4.exe on the PC.

No, it doesnt change from serial to usb.
(many thanks for try helping me samsamuel)

ahh ok, i think my first stop would be try another PC, and maybe usb cable too, see if it detects a usb connection, if not, then its prob the usb socket itself.

I already try that sam. I think problem is with usb port for flashing to much roms, because the usb port stops working when i try charging in a pc. After that doesnt work anymore.
I already try to see the goldcard but i dont understand much well the method.

well if you can find a working winmo mobile to borrow for 5 minutes, or are lucky enough to have a pci based sd card erader available, you can find the unique ID for an sd card, send it to me with an email address, and ill create you a file which you write (in a special way) to the sd card, and it magically allows you to flash any stock rom using leoimg.nbh.
Like a factory back door, if you will.
(Not sure if it works for custom roms, i dont think so)
read

I will borrow my girlfriend's father htc with winmo and i will get the id of one sdcard.
Do you want the RUU_Signed from original htc rom downloaded with my serial yesterday or is not necessary ?
Many thanks in advance.
(can you send me your email in one private message?)

no all i need is the ID and an email address. what you flash is up to you.

One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards

TiagoS said:
One notebook with pci card reader is good to get ID ?
Im try to send it today or tomorrow by PM to you with my email. Is ok to you SAM ?
Best regards
Click to expand...
Click to collapse
sure, no problem. Laptop may work, depends how its connected to teh motherboard inside. Worth a try though eh?

Yes, i will try today.
I will back soon and bring news, bad or good.

HELP
Hi all
i have the same problem with my LEO.
i tried flashing android but failed
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Thanks for your help
martin

killboy said:
now i only want to get back to wmo 6.5 but SD-flash doesnt work. Also by USB is impossible because the leo isnt recognized by 3 pcs with 2 different cables.
Click to expand...
Click to collapse
are you putting teh phone into bootloader? (coloured stripey screen) cos thats where you should usb flash from, when winmo isnt installed. (Well, actually its ALWAYS best to flash from bootloader, ..)

[Ascend W2-U00] ROM flashing + GDR3 ROM's

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Upgrade from SD card:
Prepare a new SD card which must have been formatted to FAT32.
Create “Huawei” directory in SD root directory. Copy the “UPDATE.APP” to “Huawei” directory.
Phone is in power off status. Insert SD card, hold pressing the keys “volume up” + “camera” and hit the key “power”, when the screen display “HUAWEI SD Card Upgrade”, the force download will start
When the screen displays “HUAWEI SD Card Upgrade”, it shows that SD card upgrade will be started
When the screen displays “Huawei SD card upgrade processing”, it shows the energy of battery is enough
Upgrade process percentage displayed in screen, if upgrade is successful, the screen display “OK” and “Huawei SD card update success......”in this time we can take out the sd card, phone can restart and power on automatically after ten seconds . Then SD card upgrade complete.
Possible errors:
“Sorry, the remaining battery life is less than 15%%. Please charge the battery or change another battery to try again.”
When the screen displays “The upgrade file verifies success”, it shows the format of update file is right, if not, the screen will display “Upgrade fail, there is no correct upgrade file in your SD” or “The upgrade file verifies fail.”.
Available GDR3 ROM's:
3039.0004.43200 West Europe Channel
Català
Deutch
English
English (US)
español (España)
français
italiano
Nederlands
português (Portugal)
Click to expand...
Click to collapse
http://www.windowsmania.pl/romy-286...r3]-3039-0004-43200-west-europe-channel-7265/
3039.0004.01000.00600 Russia-Channel
There is no Huawei firewall in this ROM!
English
русский
українська
中文
Click to expand...
Click to collapse
http://www.windowsmania.pl/romy-286...3]-3039-0004-01000-00600-russia-channel-6874/
Guide in polish with video:
http://www.windowsmania.pl/poradnik...anding-wgrywanie-jezyka-polskiego-wideo-7718/

Update:added video with subtitles

@djtonka how can I get UPDATE.APP ?
I mean where is it ?
how can I get GDR3 rom ?

Is there a way to get this done with the w1 model?

gremmmy said:
Is there a way to get this done with the w1 model?
Click to expand...
Click to collapse
have a try, I did not check yet

In other forum people talking that in 20900 w1 firmware we can upgrade with SD. I don't try that...

n1c3.sleepL said:
In other forum people talking that in 20900 w1 firmware we can upgrade with SD. I don't try that...
Click to expand...
Click to collapse
Interesting. Still got the W1 so will try today

n1c3.sleepL said:
In other forum people talking that in 20900 w1 firmware we can upgrade with SD. I don't try that...
Click to expand...
Click to collapse
Where did you get this information? You can tell something more? Maybe you have tutorial ?

WojtasXda said:
Where did you get this information? You can tell something more? Maybe you have tutorial ?
Click to expand...
Click to collapse
http://vk.com/page-49205625_45671168
Instalacja z karty SD (Upgrade from SD card):
Prepare a new SD card which must have been formatted to FAT32.
Create “Huawei” directory in SD root directory. Copy the “UPDATE.APP” to “Huawei” directory. Please notes that operator doesn’t spell Huawei to HUAWEI or other file name
Phone is in power off status. Insert SD card, hold pressing the keys “volume up” + “camera” and hit the key “power”, when the screen display “HUAWEI SD Card Upgrade”, the force download will start。
When the screen displays “HUAWEI SD Card Upgrade”, it shows that SD card upgrade will be started（Please according to picture 4.1）.
When the screen displays “Huawei SD card upgrade processing”, it shows the energy of battery is enough, if not, it shows “Sorry, the remaining battery life is less than 15%%. Please charge the battery or change another battery to try again.”
When the screen displays “The upgrade file verifies success”, it shows the format of update file is right, if not, the screen will display “Upgrade fail, there is no correct upgrade file in your SD” or “The upgrade file verifies fail.”.
And the upgrade process percentage displayed in screen, if upgrade is successful, the screen display “OK” and “Huawei SD card update success......” , in this time we can take out the sd card, phone can restart and power on automatically after ten seconds . Then SD card upgrade complete.
Click to expand...
Click to collapse

reksden said:
http://vk.com/page-49205625_45671168
Instalacja z karty SD (Upgrade from SD card):
Click to expand...
Click to collapse
hehe... thanks but i mean if someone tried flash the ROM from SD to W1

WojtasXda said:
hehe... thanks but i mean if someone tried flash the ROM from SD to W1
Click to expand...
Click to collapse
i did it on 20900(gdr2, russian), but any firmware have not this function. your firmware is not installing through this menu.

OK, I know everything
Flashing the ROM via SD depends on what we have in the UEFI partition. Older versions do not have this feature.

WojtasXda said:
OK, I know everything
Flashing the ROM via SD depends on what we have in the UEFI partition. Older versions do not have this feature.
Click to expand...
Click to collapse
huawei w2 has qload mode, but not files for emmc download(true).
It may be interesting to you.
.

Nice job!! I`m waiting in the future a rom personalize for L520 and the jailbreak 100%

Where can I get the Ascend W2-T00's rom?
---------- Post added at 03:48 AM ---------- Previous post was at 03:44 AM ----------
And where can I get the diaglock correct unlock code?

zhaodelin2002 said:
Where can I get the Ascend W2-T00's rom?
Click to expand...
Click to collapse
Firmware from china site: https://cloud.mail.ru/public/Cuup/G1ipui9uE

I have huawei 4 afrika w1-u00..... I saw a tutorial on YouTube explaining about jail breaking. But I had a problem since the links he gave in order to download necessary software's ain't working. Please help me on how to install windows8.1 or 10 on my huawei w1..........or else share me the links..... Thanks family. Am Henry. Email: [email protected]
or [email protected]