For the life of me, the MAGLDR menu refuses to show (Boot AD NANDE, USB Flasher, etc). The program itself will start up, but not the menu. I've put HSPL2.08 and the 2.15.50.14 radio on the phone. I actually had an Android ROM booted before, but wanted to try a WP7 rom, which acted like it wanted to boot up, but never did. I'm not sure what to do at this point. I've been rebooted this phone for the past 4 hours trying to get it to show the menu, but nothing. Any idea what the problem could be?
just to double check the process, , you need to be holding the power (end) button from during the first splash screen, and dont let go till the menu appears.
Still not giving me anything. I'm not sure what to do from here.
double check your spl, (bootloader, must say 2.08,hspl next to 'spl', , dont assume it, check it.)
since this came from a failed wp7 flash, id be very tempted to either flash a stock rom, or do a task 29, to get it back to blank, then magldr, CWM, rom.
Couple of questions:
1. What is task 29? (sounds like formatting)
2. How do I flash CWM from a fresh Magldr install? I got an Android ROM ready to install through DFT, but would prefer to flash through CWM from now on. Thanks for your help, btw.
Ok this is what you need to do...
1. Download task29 to your computer. Unzip to a folder on your computer.
look here for the task29 zip (I use this one) http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 Enter bootloader screen and run DAF as admin this will run through setup. After setup phone will reboot, this is where you start step #2.
2. Make sure you have a copy of MAGLDR which can be found here...Do the same, extract to a file on your computer.
http://forum.xda-developers.com/showpost.php?p=10197474&postcount=1 Enter bootloader, run ROM update utility as admin. The phone will install magldr1.13. Now on to step three...
3. You will reboot phone into MAGLDR by holding red power button down till you enter into MAGLDR go down to option 5...USB Flasher this is what you want to choose to setup your partition. Some ROM builds have specific partitions that work with their ROMS like the one I use which can be found here.... http://forum.xda-developers.com/showthread.php?t=915159
If you are going to use DFT builds go ahead but CWM is so much easier trust me, but just in case here is a link for some standard partitions for CWM
http://forum.xda-developers.com/showthread.php?t=898913
4. After you have done all this and have a partition setup it is time again to reboot into bootloader...choose option 5 for DFT builds and flash your ROM. Choose option 8 for CWM and install your build zip file.
Why would MAGLDR's menu refuse to pop up even if I hold down the power button? I have to constantly reboot it for half an hour before it decides to pop up, and even then, flashing fails virtually the whole time. This is getting frustrating. I'm an experienced flasher, having played with a Droid 1 and EVO for the past year, yet this phone is giving me problems like I don't know what I'm doing.
Did you try the steps outlined in my last post? You need to run a task 29 and start from scratch. Your MAGLDR download likely has a corrupt file.
akapaul26 said:
Did you try the steps outlined in my last post? You need to run a task 29 and start from scratch. Your MAGLDR download likely has a corrupt file.
Click to expand...
Click to collapse
Task 29 link you provided is freezing at 38%. I've pretty much given up on this phone.
*edit* Started over, and it worked, but didn't reboot the phone properly. One problem after another.
*edit 2* Pulled the battery, went into bootloader, flashed the MAGLDR, finished, but also didn't reboot phone properly. What could be the problem with that?
What do you mean by it did not reboot the phone properly?
Phone didn't reboot to splash, just a black screen. I've given up on this phone. I've tried for the past two days to get it going, and I've deleted all files associated to the phone. I'm glad this isn't my phone.
I usually get this with MAGLDR. Sometimes it just shows the info at the top, others, it goes to a white screen. I usually just soft reset it from the little button inside the battery cover. Or else, boot to HSPL, then Task 29.
I use a program called 'AdvancedLeoRUU'. I think this is it. Not too sure though. Try it out. You run the RomUpdateUtility to run the Task 29 btw.
Related
I have searched and could not find a thread with the exact problem I have, I hope I did not miss it if there is one.
I tried to install android and followed this guide, http://forum.xda-developers.com/showthread.php?t=609477 and I was in android working fine. Then I tried to install Clockwork Mod through active sync and things went completely downhill from there. Long story short I tried to flash it back to where i was and now I cannot boot into windows since it's gone and when i try to boot into android it says Fatal HIT 1 or something like that. Is there a way to put a rom onto my sdcard and flash it without having to use active sync or anything like that?
The menu I can access is the MAGLDR menu so I can do USB Flasher and such. I have tried reflashing with DFT_Android but when i get to the point to reboot it just stays on that screen and I have to pull the battery out then I am back to square 1. Now when I try to flash with DFT_Android through usb flasher I get the RSPL.cpp (723) error.
Thanks in advance.
EDIT:
I found a fix for the USB flasher error from this thread http://forum.xda-developers.com/showthread.php?t=895655, I just put those 2 files in with the DFT_Android folder and ran the DAF.exe now it is flashed again but still does not restart itself. If I can get it to restart itself I can boot into android.
doat said:
I have searched and could not find a thread with the exact problem I have, I hope I did not miss it if there is one.
I tried to install android and followed this guide, http://forum.xda-developers.com/showthread.php?t=609477 and I was in android working fine. Then I tried to install Clockwork Mod through active sync and things went completely downhill from there. Long story short I tried to flash it back to where i was and now I cannot boot into windows since it's gone and when i try to boot into android it says Fatal HIT 1 or something like that. Is there a way to put a rom onto my sdcard and flash it without having to use active sync or anything like that?
The menu I can access is the MAGLDR menu so I can do USB Flasher and such. I have tried reflashing with DFT_Android but when i get to the point to reboot it just stays on that screen and I have to pull the battery out then I am back to square 1. Now when I try to flash with DFT_Android through usb flasher I get the RSPL.cpp (723) error.
Thanks in advance.
EDIT:
I found a fix for the USB flasher error from this thread http://forum.xda-developers.com/showthread.php?t=895655, I just put those 2 files in with the DFT_Android folder and ran the DAF.exe now it is flashed again but still does not restart itself. If I can get it to restart itself I can boot into android.
Click to expand...
Click to collapse
From what I understand you have problems with installing Android and MAGLDR, and you want to revert to your stock ROM. Here is a link read carefully instructions:
Flashing 512 LEO: http://forum.xda-developers.com/showthread.php?t=609477
Flashing 1024 LEO: http://forum.xda-developers.com/showthread.php?t=653614
I got the We hacked it screen and now I am trying DFT_Android flash again. Thanks for the quick response hopefully it will boot into droid now if so then I will just leave it there.
Well it finished flashing but the phone did not restart, how do I fix that? Should I downgrade to an older version of MAGLDR, like 1.11 or 1.12?
EDIT: I made some progress, I got as far as the white HTC splash screen then it showed the android notification bar and a bar that said News under it and the rest of the screen was black, then the phone froze there. I pulled out the battery and tried to Boot an Nand and it said NAND Kernel load failure.
Okay I am now in android, last time I was in droid I tried to flash clockwork mod through usb since I did not have an sd card at the time and that is what messed up the phone.
The only problem now is when I flash to Hyperdroid CM7 through clockwork mod it does not boot into android it just goes to MAGLDR and when I select Boot AD NAND it says kernel failure
Quick update, I got into android and set it all up but when i reboot or turn the phone on it goes to the MAGLDR menu, how can I get it to boot straight into android?
doat said:
Quick update, I got into android and set it all up but when i reboot or turn the phone on it goes to the MAGLDR menu, how can I get it to boot straight into android?
Click to expand...
Click to collapse
Do you mean it loads the menu then stops on menu or loads magldr then loads Android?
If its the latter then thats what its supposed to do.
TheATHEiST said:
Do you mean it loads the menu then stops on menu or loads magldr then loads Android?
If its the latter then thats what its supposed to do.
Click to expand...
Click to collapse
It just shows MAGLDR but no menu and I have to take out the battery, hold the power button to get the menu then select Boot AD NAND to get into Android but most of the time it just stays on the GO GO GO! screen and I have to reflash clockwork mod then the rom and then it loads android fine when i select Boot AD NAND.
Oh I just put the battery back in and just turned the phone to see if it will boot into android and it is. lol I guess i just needed to wait little longer.
Thank you both very much
Hi Doat,
What you need to do is download a stock rom in the language your device was shipped.
* Extract the exe (right klick) and rename the RUU_Signed.nbh to LEOIMG.nbh
* Copy it to your storage card
* Put your device in bootloader (just take the battery out and in and press volume down+power off button at the same time)
* Follow the on screen instructions
That should bring you back to stock rom.
This will bring everything back to factory defaults including the SPL, so if you like to flash a custom rom after you need to flash HSPL again.
Grtz, Leo
Thanks for posting it up anyway it is good to know in case I have to revert back to stock, I really appreciate it.
Maybe I misunderstood your post, I taught you were stuck on boot with MAGLDR.
doat said:
Thanks for posting it up anyway it is good to know in case I have to revert back to stock, I really appreciate it.
Click to expand...
Click to collapse
Laurentius26 said:
Maybe I misunderstood your post, I taught you were stuck on boot with MAGLDR.
Click to expand...
Click to collapse
Sorry about the confusion I was just stuck on booting into android.
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
If the last step you took was to install magldr, of course your phone won´t boot, since you didn´t flash any build the phone could run on?
Or have i missed something?
Normaly, if you are setting things up to install some android build you have to run a file called daf.exe (only as an example, i´ve been flashing just one particular build with magldr), that daf.exe will partition the nand according to the needs of the build, that particular daf.exe was delivered with.
Now you have to enter "ad recovery" from the magldr menu (power on and keep power button pushed) and from there you would have to install from zip.
Have you been that far taking all the necessary steps? Leaving out the nand partitioning with the daf.exe is a common mistake i have read often about.
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
HTC_Pain said:
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
Click to expand...
Click to collapse
Hi,
I would suggest KEVIN134's TOOLKIT (Don't forget to thank him)
Read the thread carefully and follow his step by step guide for beginners.
Try to install one of his suggested ROMS.You can always change it at a later date.
At least you will have something.
OK thanks. I have now gotten original Telstra ROM back. I hope to start fresh in the morning and follow your link to the letter. I hope it is a good guide for beginners, as so many other seem to claim that and have no plain english steps or screenshots. I truly appreciate your post, cheers.
Tried that app, it cannot find any of the apps it tries to install/use? Maybe I need sleep.
HTC_Pain said:
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
Click to expand...
Click to collapse
You are talking about HSPL4, i would suggest you use HSPL3 (http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2).
You know how to flash back to stock winmo? Hold the volume down button while turning on the phone to enter the boot loader, connect with USB and wait for confirmation on the screen below (serial changes to usb), and then flash the stock Rom.
I never used the toolkits, never needed them so i would propose the following steps for you, to start from scratch (so we can take it step by step together, i think we need to have the same base to be able to make a statement about your phone).
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio.
After that install MAGLDR113 and then, if i were you , i would install coredroid v1.6. (http://hotfile.com/dl/113345298/fb3f69b/HD2_Core_Droid_Desire_HD_V1.6_Release_Version.rar.html)
To do that, enter the magldr menu by keeping the power button pressed while turning on your phone, enter USB Flasher from the menu and after connection has been established, run the DAF.exe which will partition the NAND for you.
After that reboot into cwm, enter the usb mass storage option, copy the zip file on the sd card and from there install from zip.
This procedure has worked every single time for me, maybe it will for you, too?
Cheech1976 said:
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio
Click to expand...
Click to collapse
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
HTC_Pain said:
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
Click to expand...
Click to collapse
Task 29 can be used to flash the radio as well, so these two steps can be taken as one.
All you would have to do is copy the radio in the same directory as the rest (task29) and rename it to RUU_signed.nbh, so this procedure will install the new radio as well.
Take that one from here:
http://forum.xda-developers.com/showthread.php?t=1018427
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
HTC_Pain said:
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
Click to expand...
Click to collapse
All right, have a good nights rest
Sent from my HTC HD2 using XDA Premium App
Thanks for that extra step explained...
I have read the thread, and downloaded the ZIP that was linked that has task 29 and the radio together. About to do it now.
OK that has completed, and it has rebooted, and now shows the white screen with HTC green logo, and stays there. This right?
I think it is.. as I have now flashed MAGLDR 1.13. Am now downloading the rom you suggested
UPDATE: I am done.. your suggested rom is installed and working!!
I am so relieved.
FYI here are the last steps I took.
* Used the Task 29 and radio update instructions from the link.
Once that was done it was a white screen with HTC logo - I then rebooted into HSPL bootloader on HTC device.
* Flashed magldr 1.13 - was very quick.
THESE NEXT STEPS ARE FROM THE QWORD DOC INCLUDED IN THE RAR FILE FROM THE SUGGESTE ROM - great stuff this doco.
1. After downloading HD2 CoreDroid DHD V*.*.rar, extract it to a folder on your PC of your choice.
2. Turn your unplugged HD2 on and boot into the MAGLDR 1.13 menu by holding down the power (right) button after initial vibration.
3. Using volume down move to number 5. USB Flasher
4. Push call button (left) and enter the USB flasher screen. You will see “USB Flasher mode Wait USB…”
5. Plug USB cable into the HD2, you should now see “USB Flasher mode Wait USB… USB
6. Go to the extracted HD2 CoreDroid DHD *.* folder on PC, and execute the DAF.exe. On newer windows buttons, right click and run as administrator.
7. Press next twice, and the installation will begin.
8. When finished press finish.
9. After the installation your HD2 will reboot into MAGLDR 1.13 menu.
10. Using the volume down button move to down to number 8. AD Recovery and press call button (left).
11. Your unplugged HD2 will now boot into the ClockworkMod Recovery menu.
12. IF YOU DID NOT BACKUP YOU SDCARD DATA DO IT BEFORE YOU PROCEED IT WILL BE FORMATED.
13. With volume down button advance to the advanced menu press left button.
14. Advance down to Partition SD Card menu.
15. Select minimum (512m) maximum (1024m). Your choice which one to use. Recommended is the 1024m, then press call button (left).
16. Select the 0m with the call button (left).
17. Wait until the process is finished.
18. Do not reboot! Stay in the ClockworkMod Recovery.
19. When finished “done” will appear in the lower half of the screen.
20. Press right button.
21. Using Volume down button move to “-mounts and storage”
22. Press end button (right).
23. Move down to mount USB storage
24. Press call button (left).
25. A new drive should be mounted to your PC.
26. Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
27. Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
28. Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
29. When finished copying and unmounts is selected, press the call button (left).
30. Press the back button
31. Move down to “-install zip from sdcard”, and press call button (left).
32. Move down to “-choose zip from sdcard”, and press call button (left).
33. Select the CoreDroid_V*.*.zip, press left button
34. Wait till it´s finish flashing, you will then see a flashing “CoreDroid”. Flash options will reappear.
35. Push end button (right).
36. Select “Reboot system now”
37. Let HD2 reboot giving it time. Wait at least +/- 10 minutes.
Once the phone has booted, let the syncs take place, wait for about 20 minutes, then reboot.
Totally worked for me. i thought I had bricked, I though no roms would hold.... this was done in an hour!
Cheech, you are the man thanks so much.
HTC_Pain said:
UPDATE: I am done.. your suggested rom is installed and working!!
Click to expand...
Click to collapse
Very cool Congratulations
Cheech1976 said:
Very cool Congratulations
Click to expand...
Click to collapse
Cheech your help was awesome, it has been your posts that meant I have had a phone for the past week.
Now not wanting to sound ungrateful, but I have to report that ROM you suggested runs really bad on my HD2. Very laggy, even to unlock the screen will hang 2 time out of 3. Oh well, I am starting to learn the same rom on the same hardware can act very differently.. sad face.
If I had to state the function I HAVE to have in my ROM it would be obviously good phone and text ability, music player with resume and bluetooth, a browser, email client, and something to play videos.
Is there a very lightweight ROM that will give me the above functions but maybe run a little better on my HTC HD2 (and are as easy to install as the one I have already tried)? Thanks heaps for any tips.
I jumped in, and using your great direction from before have a new rom on my HD2...
NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update
Wow, so much faster and snappier. Love the way Google resynced my apps and some settings!!
Gonna play with this for another few days.
EDIT: seems there is always something.. this ROM not finding my Wireless network. Finds all the ones around me but just wont find mine - even with apps to manage it. My kingdom for a lean ROM for my HD2!!!
Edit 2: Turns out Android 2.3 sets the WiFi channels to end at 11.
Our wireless was higher than that.
Advanced settings and increasing the WIFI channels to the full 14, saw my network straight away.
Took quite a bit of Googling to figure that one out.
Please delete.
logo problem
LaneyEFC said:
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
Click to expand...
Click to collapse
dude help me my htc stuck on htc logo and do not boot
which rom should i use?? and guide please
thank u
i am new so pls help
k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob
thank you i will try that later
Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...
MY PROBLEM IS:I can't get the HD2 into the bootloader and/or get my PC to recognize the phone via WMDC.
Its just so unresponsive, All its doing is Vibrating constantly/Vibrating patterns/black illuminated screens/ & very rarely, the "Loading please wait" screen with the green android and some other figure I forgot in the bottom right corner. Then on the top it gets stuck on the "aMAGLDR v1.11" and other descriptive words/numbers below it, on the top center.
- INTRO -
Hi, I'm new to XDA-developers forum, and I have 2 non-working HD2's that have been sitting around for quite some time now.
I've recently tried to get it fixed and get into this type of phone modding, as I can see HD2's are very popular for tweaking software's and such.
I have been searching around the web, more so the XDA forums, for answers to my "Special case" (yes I've seen the video when you first sign up for an account on XDA, quite funny ) of a conundrum...
Anyway, 1 HD2 is fully dysfunctional and shows no sign of life (No vibration/lights) but the lower portion of the back does get warm when I try and charge it. I have no hope for this HD2 and I think its only good for spare parts for someone else.
The other HD2 is "somewhat" functional. Sometimes if I get lucky it vibrates continuously or repetitively.
What I know about the half functioning phone:
Let my friend have it, he did some flashing of the ROM, it stopped working after awhile, and then he gave it back to me because he got another phone.
Sometimes after turning it on, it gets suck on the "aMAGLDR v1.11" screen.
I've searched up "MAGLDR" and know that its some kind of custom bootloader or so.
I've searched up how to update it to "MADLDR v1.13" and update the radio and/or use the "RUU-LEO" file.
I have all those files&programs downloaded and ready to go.
Thank you for reading my thread
It would be AWESOME if someone could help me, or even inform me of what has happened with it. If you need further answers about my two HD2's please ask me the questions, I would love to try and answer them!
DavisN said:
MY PROBLEM IS:I can't get the HD2 into the bootloader and/or get my PC to recognize the phone via WMDC.
Its just so unresponsive, All its doing is Vibrating constantly/Vibrating patterns/black illuminated screens/ & very rarely, the "Loading please wait" screen with the green android and some other figure I forgot in the bottom right corner. Then on the top it gets stuck on the "aMAGLDR v1.11" and other descriptive words/numbers below it, on the top center.
- INTRO -
Hi, I'm new to XDA-developers forum, and I have 2 non-working HD2's that have been sitting around for quite some time now.
I've recently tried to get it fixed and get into this type of phone modding, as I can see HD2's are very popular for tweaking software's and such.
I have been searching around the web, more so the XDA forums, for answers to my "Special case" (yes I've seen the video when you first sign up for an account on XDA, quite funny ) of a conundrum...
Anyway, 1 HD2 is fully dysfunctional and shows no sign of life (No vibration/lights) but the lower portion of the back does get warm when I try and charge it. I have no hope for this HD2 and I think its only good for spare parts for someone else.
The other HD2 is "somewhat" functional. Sometimes if I get lucky it vibrates continuously or repetitively.
What I know about the half functioning phone:
Let my friend have it, he did some flashing of the ROM, it stopped working after awhile, and then he gave it back to me because he got another phone.
Sometimes after turning it on, it gets suck on the "aMAGLDR v1.11" screen.
I've searched up "MAGLDR" and know that its some kind of custom bootloader or so.
I've searched up how to update it to "MADLDR v1.13" and update the radio and/or use the "RUU-LEO" file.
I have all those files&programs downloaded and ready to go.
Thank you for reading my thread
It would be AWESOME if someone could help me, or even inform me of what has happened with it. If you need further answers about my two HD2's please ask me the questions, I would love to try and answer them!
Click to expand...
Click to collapse
Those repetitive vibrations on starting are not a good sign(usually it means a non/working CPU/motherboard)!
You should flash a stock ROM and see what happens, but I suspect it won't boot up and you'll get again those vibrations: it worth try it and let me know!
Good luck!
Are you able to get to the tricolored screen by holding the power button and the volume down button? If you can get there, you may be able to task29 it and flash it with a new radio. My guess is someone flashed it with the wrong radio. Once it has the correct radio, if there is no hardware damage, it should work again.
I broke my digitizer . I'll be interested in buying the completely dysfunctional one from ya . Send me a pm if you're interested .
Sent from my HTC HD2 using Tapatalk
joshnchen said:
Are you able to get to the tricolored screen by holding the power button and the volume down button? If you can get there, you may be able to task29 it and flash it with a new radio. My guess is someone flashed it with the wrong radio. Once it has the correct radio, if there is no hardware damage, it should work again.
Click to expand...
Click to collapse
Yes, after I posted this thread, I was able to get into the tricolored screen. After that I tried to update the MAGLDR to V1.13, the screen got into the HTC loading screen with a progress bar stuck at 0% then on the computer it says there has been a communication error.
So my problem now is communication from my HD2 to PC, Which is weird because on the tricolored screen, the text switched to USB and I thought I figured it out, but no...communication error.
I am willing to do Task29 but I'm not aware of the risks or precedures.
Ok first off go to here and download the HD2 NAND Toolkit then install it o. Your computer. Next open the toolkit and then connect your HD2 to your computer via USB. Then use the toolkit to run the Task 29. Be warned though the Task 29 will totally delete the ROM partition of the NAND memory in your HD2 so you will not have a ROM on the device then so it will not boot to anything but the bootloader. Next use the Toolkit to flash either a Window's Mobile ROM, MAGLDR, or clk, you can also use it to flash Clockwork Mod Recovery.
T-Macgnolia said:
Ok first off go to here and download the HD2 NAND Toolkit then install it o. Your computer. Next open the toolkit and then connect your HD2 to your computer via USB. Then use the toolkit to run the Task 29. Be warned though the Task 29 will totally delete the ROM partition of the NAND memory in your HD2 so you will not have a ROM on the device then so it will not boot to anything but the bootloader. Next use the Toolkit to flash either a Window's Mobile ROM, MAGLDR, or clk, you can also use it to flash Clockwork Mod Recovery.
Click to expand...
Click to collapse
Ok, I have gotten the Tool kit but I wasn't able to perform task29.
I got a communication error again, I have tried to do task29 twice.
Here are some screenshots...
HD2
So my problem is still with the communication errors I keep getting if I try to do anything.
Is there anything I can do with the Micro SD card?
DavisN said:
So my problem is still with the communication errors I keep getting if I try to do anything.
Is there anything I can do with the Micro SD card?
Click to expand...
Click to collapse
You can run a Task 29 via SD card. You need to go to here and download the Repack by ShaDrac. Then right click the file and unzip it. Then find the .nbh file and rename it to LEOIMG.nbh and place it on the root of your SD card. Then boot into the bootloader and follow the on screen instructions.
T-Macgnolia said:
You can run a Task 29 via SD card. You need to go to here and download the Repack by ShaDrac. Then right click the file and unzip it. Then find the .nbh file and rename it to LEOIMG.nbh and place it on the root of your SD card. Then boot into the bootloader and follow the on screen instructions.
Click to expand...
Click to collapse
The only thing I need to put on the SC card is the LEOIMG.nbh right
DavisN said:
The only thing I need to put on the SC card is the LEOIMG.nbh right
Click to expand...
Click to collapse
Yeah that is it, just copy the .nbh file and rename it to LEOIMG.nbh. Then copy it to the root of your SD card.
Edit: Once the Task 29 is done your HD2 will only boot to the first splash screen and you will be able to boot into the bootloader also. This is because the Task 29 removed the ROM from your HD2 and you will have to re-flash clk or MAGLDR then a recovery and then a Android ROM. Or you can always flash as Windows Mobile ROM.
T-Macgnolia said:
Yeah that is it, just copy the .nbh file and rename it to LEOIMG.nbh. Then copy it to the root of your SD card.
Edit: Once the Task 29 is done your HD2 will only boot to the first splash screen and you will be able to boot into the bootloader also. This is because the Task 29 removed the ROM from your HD2 and you will have to re-flash clk or MAGLDR then a recovery and then a Android ROM. Or you can always flash as Windows Mobile ROM.
Click to expand...
Click to collapse
Alright, I got into boot loader mode, then it goes onto a completely white screen with "Loading..." on the top.
After 5 minutes or so, the screen turns off with no instructions to follow after "Loading...".
I pressed the power button to see if it still works and goes into the old MAGLDR v1.11 screen with no menus/options.
Am I suppose to keep holding the Vol down button or something, I think im doing it wrong
Edit: I charged the phone before trying it again for a few hours and I think it was on the white "Loading..." screen for the whole charge.
I don't know whats wrong with it :d
DavisN said:
Alright, I got into boot loader mode, then it goes onto a completely white screen with "Loading..." on the top.
After 5 minutes or so, the screen turns off with no instructions to follow after "Loading...".
I pressed the power button to see if it still works and goes into the old MAGLDR v1.11 screen with no menus/options.
Am I suppose to keep holding the Vol down button or something, I think im doing it wrong
Edit: I charged the phone before trying it again for a few hours and I think it was on the white "Loading..." screen for the whole charge.
I don't know whats wrong with it :d
Click to expand...
Click to collapse
First off sorry for the lag in response but I went to sleep not long after I posted my last response last night. If you never saw a box appear on the HD2 screen that asks you if you wanted to install the update and to press the power button to do so, then you did not run the Task 29. I am pretty sure you didn't anyway because you said you could still boot into MAGLDR 1.11 and if you had run the Task 29 then MAGLDR would no longer be on your HD2.
When you boot into the bootloader by holding the volume down button down and powering on the HD2 continue to hold the volume button down until you see searching. When you see searching you can release the volume down button and then you should see the window pop up that ask if you want to install the update and if so to press the power button to continue. Press the power button and the Task 29 will run, you should see a progress bar on the screen of the HD2.
Once the progress bar is done the HD2 should restart, but it will not have a ROM to boot so just pull the battery to turn it back off. Next, if you want to use Android, you need to install MAGLDR 1.13 or clk. You can install either one of these via SD card, just like the Task 29 you will have to copy the .nbh file for the custom bootloader you want to use to the root of your SD card and rename it LEOIMG.nbh. Make sure to remove the LEOIMG.nbh file that you used for the Task 29. Personally I prefer clk cause it makes the HD2 run like a native Android device, but you are having a communication error so this may lead to problems if you use clk as you have to flash Clockwork Mod Recovery via USB when you use clk. You know I would suggest you try a different USB cable as you might just have as faulty USB cable and that is what is causing the communication error. I would highly suggest you do this before trying to do anything at all more with the SD card. If you try another cable and it does not work then your HD2 more than likely has a faulty mini USB port.
If you try another cable and it works you can just use the toolkit to run the Task 29 and then use it to install either MAGLDR 1.13 or clk and then Clockwork Mod Recovery.
T-Macgnolia said:
First off sorry for the lag in response but I went to sleep not long after I posted my last response last night. If you never saw a box appear on the HD2 screen that asks you if you wanted to install the update and to press the power button to do so, then you did not run the Task 29. I am pretty sure you didn't anyway because you said you could still boot into MAGLDR 1.11 and if you had run the Task 29 then MAGLDR would no longer be on your HD2.
When you boot into the bootloader by holding the volume down button down and powering on the HD2 continue to hold the volume button down until you see searching. When you see searching you can release the volume down button and then you should see the window pop up that ask if you want to install the update and if so to press the power button to continue. Press the power button and the Task 29 will run, you should see a progress bar on the screen of the HD2.
Once the progress bar is done the HD2 should restart, but it will not have a ROM to boot so just pull the battery to turn it back off. Next, if you want to use Android, you need to install MAGLDR 1.13 or clk. You can install either one of these via SD card, just like the Task 29 you will have to copy the .nbh file for the custom bootloader you want to use to the root of your SD card and rename it LEOIMG.nbh. Make sure to remove the LEOIMG.nbh file that you used for the Task 29. Personally I prefer clk cause it makes the HD2 run like a native Android device, but you are having a communication error so this may lead to problems if you use clk as you have to flash Clockwork Mod Recovery via USB when you use clk. You know I would suggest you try a different USB cable as you might just have as faulty USB cable and that is what is causing the communication error. I would highly suggest you do this before trying to do anything at all more with the SD card. If you try another cable and it does not work then your HD2 more than likely has a faulty mini USB port.
If you try another cable and it works you can just use the toolkit to run the Task 29 and then use it to install either MAGLDR 1.13 or clk and then Clockwork Mod Recovery.
Click to expand...
Click to collapse
Whoa, after I read your post, I went and found another cable, attached it to the PC and turned on my HD2, it goes to the MAGLDR v1.11, but it has the options where I can use the volume buttons to choose things which I have never seen on this phone before lol.
What do you suggest I do since the options came up.
Wipe it and do MAGLDR v1.13
Or do one of the options on the screen
Okay well I've tried to task29 w/ the new cable, and it still does a communication error so there might be a problem with the mini USB port.
I tried to do task29 again via sd card, and this time I held down the volume down button for like 5 minutes until my fingers slipped, but there was no "searching" screen, just a "Loading..." screen and then it turns off after 10 mins.
I'm trying to get into that MAGLDR screen again with the options but I don't know how to, it was just too random.
I kind of wonder if a wrong radio was flashed to the phone and it got semi-bricked. I bought a phone once that was like that and tried to repair it and was unable to. I think there are people out there that can jtag it.
Maybe dude, right now im just waiting until someone knows exactly whats wrong with my phone and if they can fix it :d
i did do something to the radio, but i made sure it was the correct version according to their list of radios and the radio listed on my phone.
Anyway, im pretty much stuck. cant wipe via USB cable, of 3 different kinds.
and i cant wipe via sd card either.
will go back a few years and try and find old posts on old Kaiser thread,this starts to sound familiar with white screen and comms fail,if I remember properly it was/is problem with spl/hspl.
can you post what info does show on any boot screen.
am busy at moment will try searching later tonight.
Sent from my NexusHD2 using xda premium
One time I was able to flash something onto the phone and it was the "Radio_Leo_2.15.50.14" thing...
I don't remember why I did this but I did made sure it was compatible and it worked.
So it may have been the radio, I am not sure.
I do have pics of the boot loader screen before and after the flash.
If there are no solutions, I might as well sell them both. Which I'm about to do real soon
I'm unable to get CWM to boot past the Go Go Go text.
My phone had a bad screen and was replaced by a repair shop here locally. But before fixing it I though the ROM may have been bad. I flashed the ROM back using CWM as usual and I could see the ROM load but due to the bad screen I couldn't test it. After getting it back from the repair shop I couldn't get it to boot.
Here are the specifics on what I've done:
1. Ran Task29 via the HD2 NAND Toolkit in bootloader (installed correctly, powered off and reset back into Bootloader).
2. Installed HSPL 2.08
Installed MAGLDR Repartition (250 MB) in bootloader (shows 100% status bar and restarts and now populates to the MAGLDR list).
3. Select the USB Flasher option and connect my phone (displays USB...USB). Select MAGLDR Update Recovery, this then populates a new screen but when I click a button to start the install it freezes at Pushing Image Flasher ...
I've tried connecting the phone in Bootloader and launching it again and it shows that daemon (sp?) is not active on a port, starts it but nothing else happens.
I've also tried running DAF.exe (v1.13) and it will see the phone, update to 100% (shows Splash Screen) and power cycles, but when I try to launch CWM it freezes after Go Go Go.
I've switched computers (Win 2000 and Window 7), swapped USB ports (computer recognizes when connected), tried swapping my sdcard with my working one, hard reset button, Up/Down together in Bootloader and reset to default, even manually added the zimage/initrd.gz to the directory, but so far nothing.
Is there something with the new screen that could cause problems? I think that it's working correctly as the HTC status bar and splashscreen come up when loading MAGLDR but I've not been able to actually test the touchscreen since I can't boot Recovery?
Any ideas? Is there a way to manually add Recovery to a phone without going through the DAF.exe or HD2tools?
nitrodrip said:
Is there a way to manually add Recovery to a phone without going through the DAF.exe or HD2tools?
Click to expand...
Click to collapse
yes, see post 6 here
http://forum.xda-developers.com/showthread.php?t=1337663
the yes/no clockwork thread it refers to is here
http://forum.xda-developers.com/showthread.php?t=987531
Still Stuck ...
Just followed those instructions and it's still getting is stuck after Go Go Go.
Getting this and it just sits there.
ANDROID LOAD at 118000000
From MicroSD
Load zimage
Load initrd.gz
I: /INITRD.GZ
[K]11808000:25FCBC 12200000 : 191611
Load Done!
123456
Go Go Go!
This is driving me crazy?!
yea, i got i similar problem, mine freezes right when the setup instructions show up
Did you installed ROM Manager and installed the clockworkmod recovery? from the play store the last time you booted your phone?
Because when i do this, i cant run cwm anymore since a clean reflash
Sent from my NexusHD2 using XDA premium
ArdinCani said:
Did you installed ROM Manager and installed the clockworkmod recovery? from the play store the last time you booted your phone?
Click to expand...
Click to collapse
ROM Manager can be used only by CLK Bootloader users, using it will mess with your CWM installation. I remember i had installed ROM Manager and CWM once from market and used it and it messed my CWM, since then i use CWM only by accesing through MAGLDR, i'd advise You that too.
First: Magldr Update Recovery is to update MAGLDR, not to flash CWM, i read it here http://forum.xda-developers.com/showpost.php?p=14030019&postcount=1
Second: SPL is not deleted by Task29, no need to flash it again.
Third: Why do you need to repartition your phone? What ROM you want to flash?
You must also flash a proper RADIO if you don`t have it.