Hello guys,
This is my first post and i know this mobile is kind of old now,
But i messed it up. I went to the value added installer and installed Arabic language, And now i want it back in English. I don't understand Arabic.
Plz if anyone can help me, I've seen this problem in many places but i didn't find a solution. This worries me...
I had your problem when I first bought my HD2, Don't use the value thing . Just download any official ROM and flash it. So the Arabic language is removed. After that, Download this and install it then install this .
You are welcome
Well let me try I'll be back with results.
And thanks a lot for the quick reply..
I just have another problem, now my phone won't connect to the pc through active sync.. And I can see any setting too as i can't understand Arabic.
Any help on that...?
Wait a minute, Do you want Arabic or not ? If not then Just Turn off your phone then boot it up while holding the vol down buttons (this denotes ActiveSync)
Edit :
Don't download the attachments if you don't want Arabic. Just flash your ROM .
I am sorry I couldn't make u understand. I don't want Arabic.. I just want to get back to English.. And while I did this mess, I lost my data, is there any way to get it back? Thanks,
One thing... The instructions say.. Connect your PDA with USB cable.
Then establish active sync connection between the two.. But when I choose the active sync option after plugging the USB.. Nothing happens. And for the active sync u told... I tried pressing both volume buttons while booting and then it started ringing.. And then nothing happened.. Well I'm totally new to these type of things..
Not both, Just Hold the volume Down rocker only and press boot, Don't release it untill you see a tri-colour screen. Then Run the .exe of your stock rom and follow the instructions .
I don't think there is a way to restore your data, unless you did a back-up before this mess .
I'm sorry.
I got it fixed.. ill tell if i have any further probs. Its updating..
Thanks a LOT!!!
Related
Hi all I don't know what happened but I can't interact with it anymore since I installed net framework 2.0 on my mini sd card... the only thing that does is switch on and off... not even active sync... I try to reflash my current firmware "AKU3.2-1.0RC1" but it wont find the phone... guys please help me on this I need this phone for work...
well have you tried to dump the net frame off your card? Did you hard reset before you tried to re-flash?
I tried to start it without the mini sd but It wond sync and so I can not reflash it.... i tried to hard reset and the stylus wont do anything in the screen... only when I press the power button I can use the stylus to click yes or not... that's it... :S please tell me there is a combination of keys to reset it or I'm f***ed
I found out that I can get into boot screen if I press power+camera button and then reset... but from there how can I start the reflash?
ok have you done the comm + voice + reset When it is in reset press power, it will ask you if you would like to format, follow on screen. and then it should put it make to factory settings.
Man......... you are my heroooo... SOLVEEEEEED... THANKSSSSS... more then 7 hours trying to find a combination like that... and now is done thank you once again
so it worked for you?
Sorted!!!!
Yes...You are a star!!!! thank you...
reboot and froozen
I have a T-MOBILE MDA and i change a video accelaration setting and after reboot alway froozen and i cannot do anything;i try the combination comm+voice +reset and appear a command said ress send if you want do default or any othes key if u want quit;I press send and reboot again but nothing change;could you help me more?maybe i did not understand your procedure u suggest here;I am a poor italian live in China and i need my phone and dictionary;
nnnike said:
I have a T-MOBILE MDA and i change a video accelaration setting and after reboot alway froozen and i cannot do anything;i try the combination comm+voice +reset and appear a command said ress send if you want do default or any othes key if u want quit;I press send and reboot again but nothing change;could you help me more?maybe i did not understand your procedure u suggest here;I am a poor italian live in China and i need my phone and dictionary;
Click to expand...
Click to collapse
NEVER EVER enable that damn video acceleration feature in Pocket Controller without making a backup ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1 ) OR without installing a Safe Mode application ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1255&more=1&c=1&tb=1&pb=1 ) first!
I've published MANY articles (example: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=474&more=1&c=1&tb=1&pb=1 ) on the dire consequences of enabling video acceleration on WM5 devices. It's certainly worth reading all my articles thoroughly for anyone because, then, you can easily avoid situations like this.
sorry for the caps.
btw hello everyone
well lets just get to my problem.
i installed the touch it program rom thingy or whatever to my phone
and now im trying to restore it back to its original settings...
the only reason im doing that is because i cant connect the phone to the usb anymore. it WONT connect.
so im trying to restore it.
please help!
thanks!
or can someone just tell me how to reconnect it to my computer please?
i've tried different ports on the computer
and restarted it
but nothing, so please help me restore to factory settings or be able to use windows mobile device center
thanks!
maybe activesync didn't install properly when you flashed it..
or.. you should try the activesync uninstall/reinstall trick..
or a corrupt system file and you just have to hard reset the phone..
hmm..... good question
hard reset is when you press the clear storage right? or when u take out the battery while its still running??
well even if those arent hard resets i've tried them and none work
=[
A hard reset is preformed as follows:
-Hold down the two softkeys on the front of the device (the ones above the Windows logo and the OK button)
-Press the reset button using the stylus, which you can find below the volume adjuster on the left hand side of the device
-Release the stylus, but keep the softkeys held down
-You will see a warning screen
-Press the green send key on the left - the one with the phone icon on it to confirm the reset.
After that it will take a little while longer to start up the phone.
Btw if you by "original settings" mean restoring your official ROM a hard reset won´t do. You will need to flash the official ROM to go back if I´m not mistaken.
thanks for the info!
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
goodtilltomorrow said:
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
Click to expand...
Click to collapse
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
knrubar said:
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
Click to expand...
Click to collapse
Are you just trying to go back to the stock ROM becasue of the AS problem? Did you try a reinstall? After you uninstall before reinstalling AS go into your program files on the PC and delete the activesync folder.
If you HARDSPL'ed you need a STOCK ROM without the nbh. file. Thats why its kicking back to TOUCH.
Good Luck
I flash this phone with a wrong image, and now only a white screen appear.
Is impossible to make any key combination to get to the "download screen" or "update via k3img.bin".
But if i connect the cel via activesync I can see it on the desktop via trueconnection or any other remote control software (the cel is "working").
Some days ago, i make a dump of this cell and I have it on my computer (via pdocread), so my idea is to use the pdocwrite to at least write the first part00 to reprogram the buttons, so i can use a k3img.bin (in chinese... better than nothing) again.
But the software says that the partition is write protected, and I try almost all ways to unlock the Extended_ROM on windows and still says that is write protected.
Can u, masters of the cell phones help me?
Im facing the very same problen, so if some more knowledged might help us.
As Beastworm already described - I am too unable to get Download mode because of wrong button mapping.
nobody?
Beastworm said:
nobody?
Click to expand...
Click to collapse
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Amaly said:
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Click to expand...
Click to collapse
the buttons don't work. I will try the software now.
edit 1: Can u upload the software to megaupload? i don't have permission to download in mobileuncle
edit 2: OK, i reply and then i can download...
i connect the phone and nothings happend
Could you upload that software to somewhere else Beastworm ?
I'd like to give it a go.
tell me a good site to upload. Some people have troubles with rapidshare, others with megaupload, and others with others sites.
Tell me a site and i will upload.
here is the file
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
JokinenK said:
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
Click to expand...
Click to collapse
what u do?
and, what .img u use to reflash the phone?
I installed the app, connected the phone & waited until it was recognized as windows mobile. Started the IDT before the first aid kit & used image: P638M30_TH_UI1_L12_C7_CHS_MFGW_WM650_C02SPC002R01_091203.bin (WM6.5 Chinese).
After the IDT was waiting for the phone to connect, I started up the first aid kit & simply clicked Download mode and the IDT took care of the rest.
It took me two flashes to get it right, but after that it's been working as expected.
Im not sure, but if you're running either windows vista or 7, you might wanna run the first aid kit as an administrator.
nothing, i am in windows 7 (and running it as administrator) and the download mode button is still in grey
I will search for a xp machine and try again.
btw. The 6.1 chinese rom, have a good button mapping.
Do you mind sharing that working 6.1 image? And I hope you can revive your phone with some xp machine!
let me find it.
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Amaly said:
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Click to expand...
Click to collapse
i have a dump of a english too. But I don't know how to convert it as a .bin too
NEWS: MY PHONE IS ALIVE AGAIN (in a windows XP machine)
but.... i flash another bad rom , and now all is flipped like a mirror (and the buttons are still bad mapped )
The K3 First aid kit don't work now (it recognizes it, but when i press "download mode" the phone don't restart). Is a very clean spanish rom of 6.1, so i think that p638chinesestuff.cab that is installed when a hard reset is done, is the responsible to k3firstaid work.
So i will try to extract it from the dump, and install it on the phone, and try to reflash again.
Why I flash a bad rom?... i have a file with the name "K3imgCHI61.bin" and I think thats was the chinese 6.1.... but not. It is the Chilean (my country) 6.1
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Amaly said:
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Click to expand...
Click to collapse
I can't find the hard reset combination of this rom via buttons
And the startup clean via settings don't work.
can someone send me that p638chinesecharacters.cab file what is installed in the phone during a hard reset?
i try to extract it, but i can't
Hey,
i have a problem with my htc Trinity.
I installed a fine ROM of Windows Mobile 6.5 a few month ago.
I was a bloody nooby, but somehow it works till now.
Now my PDA just gives me a blackscreen when starting it. The backlight of the LCD is on ...but nothing more.
I tried to do a hard reset and the display shows "Press SEND to restore factory default, press END to quit" ... so gerneraly the display should be fine...
But when i try to start the bootloader with camera and power button nothing happen
I cant connect via USB... widows doesnt find any devices.
Pleade help me.. i used the search but didnt find anything helpfull
Im just a newbie
Greetings Cominus
P.S : Sorry for my bad englisch
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone