Hi all I don't know what happened but I can't interact with it anymore since I installed net framework 2.0 on my mini sd card... the only thing that does is switch on and off... not even active sync... I try to reflash my current firmware "AKU3.2-1.0RC1" but it wont find the phone... guys please help me on this I need this phone for work...
well have you tried to dump the net frame off your card? Did you hard reset before you tried to re-flash?
I tried to start it without the mini sd but It wond sync and so I can not reflash it.... i tried to hard reset and the stylus wont do anything in the screen... only when I press the power button I can use the stylus to click yes or not... that's it... :S please tell me there is a combination of keys to reset it or I'm f***ed
I found out that I can get into boot screen if I press power+camera button and then reset... but from there how can I start the reflash?
ok have you done the comm + voice + reset When it is in reset press power, it will ask you if you would like to format, follow on screen. and then it should put it make to factory settings.
Man......... you are my heroooo... SOLVEEEEEED... THANKSSSSS... more then 7 hours trying to find a combination like that... and now is done thank you once again
so it worked for you?
Sorted!!!!
Yes...You are a star!!!! thank you...
reboot and froozen
I have a T-MOBILE MDA and i change a video accelaration setting and after reboot alway froozen and i cannot do anything;i try the combination comm+voice +reset and appear a command said ress send if you want do default or any othes key if u want quit;I press send and reboot again but nothing change;could you help me more?maybe i did not understand your procedure u suggest here;I am a poor italian live in China and i need my phone and dictionary;
nnnike said:
I have a T-MOBILE MDA and i change a video accelaration setting and after reboot alway froozen and i cannot do anything;i try the combination comm+voice +reset and appear a command said ress send if you want do default or any othes key if u want quit;I press send and reboot again but nothing change;could you help me more?maybe i did not understand your procedure u suggest here;I am a poor italian live in China and i need my phone and dictionary;
Click to expand...
Click to collapse
NEVER EVER enable that damn video acceleration feature in Pocket Controller without making a backup ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1 ) OR without installing a Safe Mode application ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1255&more=1&c=1&tb=1&pb=1 ) first!
I've published MANY articles (example: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=474&more=1&c=1&tb=1&pb=1 ) on the dire consequences of enabling video acceleration on WM5 devices. It's certainly worth reading all my articles thoroughly for anyone because, then, you can easily avoid situations like this.
Related
As far as we noticed, Wm6 has a terrible bug. Locked device with a password wont be recognized if battery was removed. Also it resets the clock. I believe there is a solution for the password thing. here's what i've done
1- Download and install this cab file Omega-Pass : http://www.megaupload.com/?d=OTW2NZT6 ( A password application that is gonna be used )
2- Go to the application and set the Password- Now the builtin lock application will take the settings from Omega-Pass .
3- youll notice that Windows Lock will require a password as if set as alphanumeric
4- Go back to the Built-in Lock Application and reset the password u want if u need a numerical form Only.
I think also u can just install the application and go directly to the builtin lock application and configure it but didnt try that. Dont wanna risk it i already had 4 hard reset
Now if you do all 4 steps even if u remove the battery for an hours , it will keep recognizing your password. The clock will be reset only. That worked for me .
Please inform me if it works for you also.
Karim.
120 views and no reply ?
well it may work but i just dont use password lock so ... it is useless to me, but this software does not fix the bug only prevents it from happening
Yes of course it interacts with the Builtin Lock code. if we can know how it's preventing it from happening maybe we can fix it ?
i am not so sure where exactly the bug is, but backup battery is only enabled when the main battery is depleted... but when you remove the main battery the power needed for preserving the basic information like time, date, lock password is not transferred from backup battery maybe this is power management or driver bug, and i have seen this in WM5 too
Buth at this time this problem is not yet solved
The thing i dnt understand is that WM6 devices Dont have a Backup battery as i saw on a HTC Touch device. So is it that BA is not 100% compatible with Wm6 ? or it's just a bug with all wm6 devices ?
well I tried, it seem working. for my case, I didn't need to remove the battery to have the problem, after a simple soft reset (after a reconfiguration with the advance reconfiguration tool), the password was lost.
So I do not know if i will have the problem again .
hope not
how did you get in your BA once the password is lost?
i just got my BA and installed WM6...
im down at my 20mins per retry...
Once the password is forgotten , You gotta hard-reset it. This solution only prevent it from being forgotten and cannot restore it.
What is original pass for that device?
Solution
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Help!!!
vipperdiver said:
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Click to expand...
Click to collapse
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
can anyone upload in rapidshare?
HaiLe512 said:
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
Click to expand...
Click to collapse
Hi Haile...
Did you these steps correct???
After you press the reset button with the stylus, immediately press and hold the record and camera buttons.
It should work.
No more.
wat i did when i experienced the password not accepted thingy was, when i did the hard reset, we needed to follow the "no, yes, yes" sequence. what i did was not choose yes on the option where it asked to reformat rom(i forgot what was written on the display). i think i chose "no,yes,no". after that, everything was still there and the password on startup was gone. hope this helps to some of u guys.
thank a lot
ccrraaapppp
If the device is locked,when the device is locked how can you download and install something...? Please somebody tell this clown that a device locked on password on WM6 ,you cannot access the phone whatsoever at all, WMDC will ask you to "autenticate" on the phone if you want connection...
The guy who gives this solution hasnt got a clue just as much Bill Gates hasnt.
yesss
yes it worked on mine this way as well.
Obviously the correct password wouldnt work...
Id like to see that billionaire giving some appologies for that....
Anyway mind this first;
Press and keep holding Camera and Record buttons .
Press reset in the same time
Keep holding Camera and Record another 2 more seconds .
Using the same two buttons do the No-yes-yes then
Attention ress just "OK" . pressing reset wont work.
IK does unlock .it just did my HTC .
Hello. First all sorry for my english.
Since a few days the buttons of my pda are crazy and don't work properly.
For example: The power button don't switch off the pda, but if I press and hold the button for a few seconds, switch off the ligth of the screen. This mean that the button isn´t broken, is it??? With the cam and record button it´s the same. If I press those buttons on windows 6 it works perfectly but i want to hard reset my pda and when reset and press whe i have to change "Clean Registry Hive " and "Format Storage" I can't change these options and cant make hard reset.
Then that is the question:
How can i make hard reset?? is there an alternative metod???? At Qtek S200 there is an application that clean the memory. It Exists for my blueangel??'
There is any application than do it???
Thanks. I´m waiting for answers.
u can use psshutXP it can do a hardreset with confirmation by holding the upper right corner of the application.
Hello.
Thanks for your answer.
I have tested your option, but it seems that the hard reset doesn´t work in wm6. It changes time and date, but don't clean memory, because i have the same programs than before.
I need another metod.
Thanks.
here u are..
just reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
good luck
cheers
adri..
Hello evoluzionne.
I know that way to do hard reset, but my problem is that i can´t change the options:
enable kitl should be no
clean registry hive should be yes
format storage should be yes
In Windows Mobile 5 or 6 the camera and record buttons works properly, but when I reset the device and press the record and camera button quickly before the the version appears (radio,etc).. i can´t change the optios. It´s seems like the buttons don´t work. But i know that the buttons works, but the buttons don´t change the options. It´s very stranger.
In the power button is seemed. I can switch on the device, i can switch on/off the screen if I press and hold the button but i Can´t switch off the device. It´s incredible. My buttons are crazy. So i want to do downgraded to WM2003 ( so I need to do hard reset).
Do you know why are my buttons crazy????
Thank for your answer, and sorry for my english
Ciao
Hi,
Just wondering if you resolved the issue. I am having a similar problem on pda2k upgrading from wm5 to wm6. Buttons work except during boot menu so i cannot change options.
Appreciate your help.
MC
melilleny said:
Hello evoluzionne.
I know that way to do hard reset, but my problem is that i can´t change the options:
enable kitl should be no
clean registry hive should be yes
format storage should be yes
In Windows Mobile 5 or 6 the camera and record buttons works properly, but when I reset the device and press the record and camera button quickly before the the version appears (radio,etc).. i can´t change the optios. It´s seems like the buttons don´t work. But i know that the buttons works, but the buttons don´t change the options. It´s very stranger.
In the power button is seemed. I can switch on the device, i can switch on/off the screen if I press and hold the button but i Can´t switch off the device. It´s incredible. My buttons are crazy. So i want to do downgraded to WM2003 ( so I need to do hard reset).
Do you know why are my buttons crazy????
Thank for your answer, and sorry for my english
Ciao
Click to expand...
Click to collapse
Another BA with the same problem
melilleny said:
Hello. First all sorry for my english.
Since a few days the buttons of my pda are crazy and don't work properly.
For example: The power button don't switch off the pda, but if I press and hold the button for a few seconds, switch off the ligth of the screen. This mean that the button isn´t broken, is it??? With the cam and record button it´s the same. If I press those buttons on windows 6 it works perfectly but i want to hard reset my pda and when reset and press whe i have to change "Clean Registry Hive " and "Format Storage" I can't change these options and cant make hard reset.
Click to expand...
Click to collapse
Hi,
I have an exact problem as you. I've followed any info about hard reset, I've red wiki 100times, searching using Google but perform hard reset or enter to bootloader mode on my BA is IMPOSSIBLE!
In November I've upgraded to WM6, ROM from pdaviet, OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
MDA is working without problems, I can use phone, wifi, camera, record, BT, ActiveSync 4.5.
Right now I want to upgrade to new ROM from pdaviet but I stuck with a step: enter to bootloader mode
I've tried psShupXP software, which is capable do a hard reset. Still no luck, after software hard reset my BA comes on with all files installed...
Unfortunatelly mtty doens't works too, I can't see any WCEUSBSH001 port...
I'm not alone, but the bad news is that I don't find any solution
Thanks for any hint
R.V.
I have the same problem as you do, except I can enter BootLoader and Hardreser, but I can't turn off my device with power button, and if I hold it for long it shuts the backlight.
If anyone had any sucess solving this please share how...
Thank you.
evoluzionne said:
just reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
good luck
cheers
adri..
Click to expand...
Click to collapse
I am following the same exact steps...flashed rom for the 5th time...hard reset is not working. The problem...'Mail' button (the hardware key) does not respond. I can change the options from No to Yes. But after pressing the 'mail' button nothing happens. Please let me know if there is another way to clear the registry hives and format the storage!!!
have you guys tried the MTTY alternative? i think it's somewhere here in the forum.
I am having the problem described in here.
By holding the record & media button, it *does* go to the hard reset menu, so obviously the record and wm buttons do work (ie is not a physical problem with the buttons), since these buttons do get it to the menu, it just does not allow any changes to the options (KITL, format storage, format registry hive)...
It is maddening, because I am stuck with the oldish pdaviet WM6 rom that crashes for me all the time and I want to try the newer 6.1 ROMs but can't hard reset and have seriously considered finding another used BA on ebay to start fresh it is driving me so nuts.....
I am about to search for the MTTY method described by samurai above... assuming I locate and can do it, I'll post results....
what do you mean "it just does not allow any changes to the options"? do you mean it wont let you navigate through each options? or do you mean it wont let you change from yes to no or no to yes?
any changes to the options are executed only after you have pushed the "mail" button
SilverSamurai said:
have you guys tried the MTTY alternative? i think it's somewhere here in the forum.
Click to expand...
Click to collapse
Catch:
http://forum.xda-developers.com/showthread.php?t=378640&highlight=MTTY
tried it myself - works great!
Bird
Hi everyone,
I recently received an XDA Orbit 2, literally, charged it for 2 hours, and when it was full charged, I started using it, I had it for about 2 months now, and recently I changed my home Internet connection to wireless (It's a B & G connection) so my laptop connects fine, and when I tried to connect my XDA Orbit 2, it connected and then soft-reset itself, and now it just loads the O2 screen, then Windows Mobile screen with the volume controller and I can't do anything else so here's what I have tried so far:
- Soft reset
- Removed battery and SIM
- Since I can't access phone's menu at all, I tried to Hard Reset method by holding the 2 soft key, reset, and the power button - So I get the warning that everything will be lost and to press 'Send' to continue, so I press the green key, and soft resets and goes back to the same situation again.
- The latest thing I tried is to load the Hard-SPL into the SDCard which has been formatted to FAT32, so loaded the POLAIMG.nbh into the root. and loaded the phone into BootLoader mode (Camera and reset buttons). It loads the memory card and just says 'Loading ... ' I left it for about an hour, until the battery died completely (I'm sure it's not supposed to take that long). And still the same problem.
I'm not sure if this phone is now bricked, can anyone help me plesae. I really need this to start working again, I don't have any info. on it. (Everything was sync. previously).
Kind regards,
Since you havent really messed with SPL, i would say to take it back, since its still into warranty.
Thanks for the reply, I'm not actually in the UK and will be overseas for a while. I don't really mind experimenting so I would appreciate any advise on this matter. Thanks again.
htctytnowner said:
Thanks for the reply, I'm not actually in the UK and will be overseas for a while. I don't really mind experimenting so I would appreciate any advise on this matter. Thanks again.
Click to expand...
Click to collapse
I assume just boots into bootloader and then stays there?
If yes you culd try searching out a thread on MTTY and recovery from boot loader but I dont know how well that would work on polaris as I have not tried it yet.
HTH
Leon
Thanks for the reply, I heard about the MTTY process, but I've no clue on how to do it, since the phone can't connect in ActiveSync mode. Is there a thread or WiKi guide out there?
htctytnowner said:
Thanks for the reply, I heard about the MTTY process, but I've no clue on how to do it, since the phone can't connect in ActiveSync mode. Is there a thread or WiKi guide out there?
Click to expand...
Click to collapse
Only in the ELF forum
Here:
I'm pretty sure you can download MTTY from here and read through how to use it.
http://forum.xda-developers.com/showthread.php?t=347700
Also it is worth checking the wiki and searching
http://forum.xda-developers.com/showpost.php?p=2054848&postcount=38
Please do some research! I have not done this before and I have no idea what the commands do!!!
pqillu said:
You can try this:
Originally Posted by christonge
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
THX to christonge
Good luck.
PQillu
Click to expand...
Click to collapse
Please Heeelp!
I wa installing a rom from todopdas.es an my Polaris doesn´t pass from the screen where´s said "smart mobility", and R1.58.21.23 G 25.65.30.04H D 1.52.00.00, please what I can do?
You need to do Hard Reset, all information will be wiped off. To do hard reset, hold down the:
1.Press and hold the GPS/MESSAGING and INTERNET EXPLORER
buttons, and at the same time, use the stylus to press the RESET
button at the bottom of your device.
2. Release the RESET button, but
continue pressing the GPS/
MESSAGING and INTERNET
EXPLORER buttons until you
see this message on the
screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press Send to restore
manufacturer default, or
press other keys to cancel.
3. Release the buttons, and then press SEND on your device to perform
the hard reset, or press any other button to cancel the reset.
Good luck.
Hi,
I'm using an HTC TC POLARIS100. Today I upgraded my ROM and SPL successfuly. If you're still in trouble and believe the same process will help, I will let you know the process followed.
GUY
Hi!
I`m totally new to this so i would like to ask for a help! I have Qtek s110, and i was reading about updating the ROM and that kind of things, trying to get know better the device.
On http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i have read that if you press Camera + Power and Soft Reset, you will enter into the bootloader mode. I wanted to see that mode, and pressed that. I got some message - word and some number and nothing happend (not error message but i cannot remember exactly the word and the nubmer..like some version number).
Then i have restarted the device so i could use it again and when the device finished the boot, i had to calibrate the screen, and things like that, like on the first boot of device (the programs where installing). After that i lost all of my personal informations, contacts, programs!!! PLEASE HELP if there is any help!
Of course, i didnt make any ROM backups! Is there any way to get my data back!? On my storage card i saw some folders that i didnt make myself. Some WMDRM with some .hds file and some 08071200001 empty folder!
Please help!
P.S. Why the hack that guy didnt said that button sequence is hard reset of the device!?? DAMN!
Sorry, but i`m really pissed! I will kill somebody now!
eyej said:
Hi!
I`m totally new to this so i would like to ask for a help! I have Qtek s110, and i was reading about updating the ROM and that kind of things, trying to get know better the device.
On http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i have read that if you press Camera + Power and Soft Reset, you will enter into the bootloader mode. I wanted to see that mode, and pressed that. I got some message - word and some number and nothing happend (not error message but i cannot remember exactly the word and the nubmer..like some version number).
Then i have restarted the device so i could use it again and when the device finished the boot, i had to calibrate the screen, and things like that, like on the first boot of device (the programs where installing). After that i lost all of my personal informations, contacts, programs!!! PLEASE HELP if there is any help!
Of course, i didnt make any ROM backups! Is there any way to get my data back!? On my storage card i saw some folders that i didnt make myself. Some WMDRM with some .hds file and some 08071200001 empty folder!
Please help!
P.S. Why the hack that guy didnt said that button sequence is hard reset of the device!?? DAMN!
Sorry, but i`m really pissed! I will kill somebody now!
Click to expand...
Click to collapse
Hi there
There are no way to restore the data from ram since you hard reset your device. The big lost is contact book and sms message. You can try to copy the contact from sim to phone if it is exist in Sim card.
Good luck
try removing the battery n keep it like that for about 10 hrs.. n then put it back on n start the ppc..see if it helps
..n if it doesn't do not worry, ur fone aint dead yet....u'd have to go thru the hard way then
Hello Guys,
I had installed HTC home plugin on my Xperia and now its hung or unresponsive. I can see the start, call and Menu on the screen but touching that does not do anything .
Please help me out.
Has anyone seen this before ?
Regards,
which HTC Home are you using ?
i have PJC HTC Home installed and it's working perfectly. once i used the hack for the weather it was fine ...
Thanks for your reply mrdo,
I am using http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v2-1.html
I need to just uninstall this software but the phone is not responding..
please suggest a way to reset.. the other trouble is its not recognized as a device now using USB so I could not use mtty n other things..
is there any other way ??
thanks
thats not for VGA devices, it's for QVGA which is why it's not working.
Can you acess the X1 from through activesync on your PC?
If so then you can uninstall it from there (add/remove programs)
if not then I'm afraid you'll have to hard reset, and learn a valuable lesson, make sure you know what it is you're installing..
Hard reset, is take the back cover off and stick the sytlus in the small hole in the side next to the battery, while holding down the two silver buttons on the front.
Hello fards,
Thanks very much for the help..
Unfortunately I learnt the lesson the hard way
I tried hard reset as you suggested but it did not make any difference
what else can be done.. ?? any suggestion is most welcome.. I can try doing mtty reset but some how I could not go to boot loader mode.. how to go into bootloader mode ?
Please help..
Regards
dhamaal said:
Hello fards,
Thanks very much for the help..
Unfortunately I learnt the lesson the hard way
I tried hard reset as you suggested but it did not make any difference
what else can be done.. ?? any suggestion is most welcome.. I can try doing mtty reset but some how I could not go to boot loader mode.. how to go into bootloader mode ?
Please help..
Regards
Click to expand...
Click to collapse
If you've done it right it must have made a difference as this wipes the devices memory. If you can't do this then don't even start messing about with mtty
if you see the SE logo, then you haven't done it right.
hold the two silver hardware keys on the front of the x1 down after you've reset. Keep pressing them down till you see some text that tells you to press R
If you don't see this screen keep trying (reset+press the keys) till you do.
Thanks fards,
you are a lifesaver !! that seems to have worked and now I can use my phone ..
Thanks a ton once again !!